summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2018-07-07net: macb: Allocate valid memory for TX and RX BD prefetchHarini Katakam
GEM version in ZynqMP and most versions greater than r1p07 supports TX and RX BD prefetch. The number of BDs that can be prefetched is a HW configurable parameter. For ZynqMP, this parameter is 4. When GEM DMA is accessing the last BD in the ring, even before the BD is processed and the WRAP bit is noticed, it will have prefetched BDs outside the BD ring. These will not be processed but it is necessary to have accessible memory after the last BD. Especially in cases where SMMU is used, memory locations immediately after the last BD may not have translation tables triggering HRESP errors. Hence always allocate extra BDs to accommodate for prefetch. The value of tx/rx bd prefetch for any given SoC version is: 2 ^ (corresponding field in design config 10 register). (value of this field >= 1) Added a capability flag so that older IP versions that do not have DCFG10 or this prefetch capability are not affected. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: macb: Free RX ring for all queuesHarini Katakam
rx ring is allocated for all queues in macb_alloc_consistent. Free the same for all queues instead of just Q0. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07mlxsw: spectrum_router: avoid uninitialized variable accessArnd Bergmann
When CONFIG_BRIDGE_VLAN_FILTERING is disabled, gcc correctly points out that the 'vid' variable is uninitialized whenever br_vlan_get_pvid returns an error: drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_rif_vlan_fid_get': drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:6881:6: error: 'vid' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the condition check to always return -EINVAL here, which I guess is what the author intended here. Fixes: e6f1960ae6c7 ("mlxsw: spectrum_router: Allocate FID according to PVID") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07cxgb4: assume flash part size to be 4MB, if it can't be determinedCasey Leedom
t4_get_flash_params() fails in a fatal fashion if the FLASH part isn't one of the recognized parts. But this leads to desperate efforts to update drivers when various FLASH parts which we are using suddenly become unavailable and we need to substitute new FLASH parts. This has lead to more than one Customer Field Emergency when a Customer has an old driver and suddenly can't use newly shipped adapters. This commit fixes this by simply assuming that the FLASH part is 4MB in size if it can't be identified. Note that all Chelsio adapters will have flash parts which are at least 4MB in size. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Prevent sending command during global or core resetHuazhong Tan
According to hardware's description, driver should not send command to IMP while hardware doing global or core reset. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Remove the warning when clear reset causePeng Li
Only the core/global/IMP reset need clear cause, other type does not need do it. The warning may be treated as error as it is normal. This patch removes the warning. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix get_vector ops in hclgevf_main moduleYunsheng Lin
The hclgevf_free_vector function expects the caller to pass the vector_id to it, and hclgevf_put_vector pass vector to it now, which will cause vector allocation problem. This patch fixes it by converting vector into vector_id before calling hclgevf_free_vector. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix warning bug when doing lp selftestYunsheng Lin
The napi_alloc_skb is excepted to be called under the non-preemptible code path when it is called by hns3_clean_rx_ring during loopback selftest, otherwise the below warning will be logged: [ 92.420780] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/1873 <SNIP> [ 92.463202] check_preemption_disabled+0xf8/0x100 [ 92.467893] debug_smp_processor_id+0x1c/0x28 [ 92.472239] __napi_alloc_skb+0x30/0x130 [ 92.476158] hns3_clean_rx_ring+0x118/0x5f0 [hns3] [ 92.480941] hns3_self_test+0x32c/0x4d0 [hns3] [ 92.485375] ethtool_self_test+0xdc/0x1e8 [ 92.489372] dev_ethtool+0x1020/0x1da8 [ 92.493109] dev_ioctl+0x188/0x3a0 [ 92.496499] sock_do_ioctl+0xf4/0x208 [ 92.500148] sock_ioctl+0x228/0x3e8 [ 92.503626] do_vfs_ioctl+0xc4/0x880 [ 92.507189] SyS_ioctl+0x94/0xa8 [ 92.510404] el0_svc_naked+0x30/0x34 This patch fix it by disabling preemption when calling hns3_clean_rx_ring during loopback selftest. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Add configure for mac minimal frame sizeJian Shen
When change the mtu, the minimal frame size of mac will be set to zero, it is incorrect. This patch fixes it by set it to the default value. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix for mailbox message truncated problemFuyun Liang
The payload of mailbox message is 16 byte and the value of HCLGE_MBX_MAX_ARQ_MSG_SIZE is 8. A message truncated problem will happen when mailbox message is converted to ARQ message. This patch replaces HCLGE_MBX_MAX_ARQ_MSG_SIZE with the size of ARQ message in hclgevf_mbx_handler to fix this problem. Fixes: b11a0bb231f3 ("net: hns3: Add mailbox support to VF driver") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix for l4 checksum offload bugYunsheng Lin
Hardware only support tcp/udp/sctp l4 checksum offload, but the driver currently tell hardware to do l4 checksum offlad when l3 is IPv4 or IPv6, which may cause checksumm error. This patch fixes it by only enabling the l4 offload when l4 is tcp/udp/sctp. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix for waterline not setting correctlyYunsheng Lin
The HCLGE_RX_PRIV_EN_B is used to tell the firmware whether to update the specific waterline value, if the is not set, the firmware will ignore the value. This patch fixes by setting the HCLGE_RX_PRIV_EN_B even if the updated value is zero. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix for mac pause not disable in pfc modeYunsheng Lin
When pfc pause mode is enable, the mac pause mode need to be disabled, otherwise the pfc pause packet will not be sent when congestion happens. This patch fixes by disabling the mac pause when pfc pause is enabled. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07net: hns3: Fix tc setup when netdev is first upYunsheng Lin
Currently, tc related configuration is not setup when the netdev is first up, which cause the stack only using tc 0 problem. This patch fixes it by setting the tc related configuration using the info from NCL_CONFIG when netdev is first up. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07liquidio: fix kernel panic when NIC firmware is older than 1.7.2Rick Farrington
Pre-1.7.2 NIC firmware does not support (and does not respond to) the "get speed" command which is sent by the 1.7.2 driver (for CN23XX-225 cards only) during modprobe. Due to a bug in older firmware (with respect to unknown commands), this unsupported command causes a cascade of errors that ends in a kernel panic. Fix it by making the sending of the "get speed" command conditional on the firmware version. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07ravb: remove custom .set_link_ksettings from ethtool opsVladimir Zapolskiy
The generic phy_ethtool_set_link_ksettings() function from phylib can be used instead of in-house ravb_set_link_ksettings(). Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07ravb: remove custom .get_link_ksettings from ethtool opsVladimir Zapolskiy
The generic phy_ethtool_get_link_ksettings() function from phylib can be used instead of in-house ravb_get_link_ksettings(). Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07ravb: remove useless serialization in ravb_get_link_ksettings()Vladimir Zapolskiy
phy_ethtool_ksettings_get() call does not modify device state or device driver state, hence there is no need to utilize a driver specific spinlock. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07ravb: remove custom .nway_reset from ethtool opsVladimir Zapolskiy
The generic phy_ethtool_nway_reset() function from phylib can be used instead of in-house ravb_nway_reset(). Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07ravb: simplify link auto-negotiation by ethtoolVladimir Zapolskiy
There is no need to call a heavyweight phy_start_aneg() for phy auto-negotiation by ethtool, the phy is already initialized and link auto-negotiation is started by calling phy_start() from ravb_phy_start() when a network device is opened. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07ravb: fix invalid context bug while changing link options by ethtoolVladimir Zapolskiy
The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in ravb_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07ravb: fix invalid context bug while calling auto-negotiation by ethtoolVladimir Zapolskiy
Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: remove custom .set_link_ksettings from ethtool opsVladimir Zapolskiy
The generic phy_ethtool_set_link_ksettings() function from phylib can be used instead of in-house sh_eth_set_link_ksettings(). Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: remove custom .get_link_ksettings from ethtool opsVladimir Zapolskiy
The generic phy_ethtool_get_link_ksettings() function from phylib can be used instead of in-house sh_eth_get_link_ksettings(). Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: remove useless serialization in sh_eth_get_link_ksettings()Vladimir Zapolskiy
phy_ethtool_ksettings_get() call does not modify device state or device driver state, hence there is no need to utilize a driver specific spinlock. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: remove custom .nway_reset from ethtool opsVladimir Zapolskiy
The generic phy_ethtool_nway_reset() function from phylib can be used instead of in-house sh_eth_nway_reset(). Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: simplify link auto-negotiation by ethtoolVladimir Zapolskiy
There is no need to call a heavyweight phy_start_aneg() for phy auto-negotiation by ethtool, the phy is already initialized and link auto-negotiation is started by calling phy_start() from sh_eth_phy_start() when a network device is opened. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: fix invalid context bug while changing link options by ethtoolVladimir Zapolskiy
The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in sh_eth_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. For reference the change is a partial rework of commit 1e1b812bbe10 ("sh_eth: fix handling of no LINK signal"). Fixes: dc19e4e5e02f ("sh: sh_eth: Add support ethtool") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07sh_eth: fix invalid context bug while calling auto-negotiation by ethtoolVladimir Zapolskiy
Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: dc19e4e5e02f ("sh: sh_eth: Add support ethtool") Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07nfp: bpf: migrate to advanced reciprocal divide in reciprocal_div.hJiong Wang
As we are doing JIT, we would want to use the advanced version of the reciprocal divide (reciprocal_value_adv) to trade performance with host. We could reduce the required ALU instructions from 4 to 2 or 1. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-07nfp: bpf: support u32 divide using reciprocal_div.hJiong Wang
NFP doesn't have integer divide instruction, this patch use reciprocal algorithm (the basic one, reciprocal_div) to emulate it. For each u32 divide, we would need 11 instructions to finish the operation. 7 (for multiplication) + 4 (various ALUs) = 11 Given NFP only supports multiplication no bigger than u32, we'd require divisor and dividend no bigger than that as well. Also eBPF doesn't support signed divide and has enforced this on C language level by failing compilation. However LLVM assembler hasn't enforced this, so it is possible for negative constant to leak in as a BPF_K operand through assembly code, we reject such cases as well. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-07nfp: bpf: support u16 and u32 multiplicationsJiong Wang
NFP supports u16 and u32 multiplication. Multiplication is done 8-bits per step, therefore we need 2 steps for u16 and 4 steps for u32. We also need one start instruction to initialize the sequence and one or two instructions to fetch the result depending on either you need the high halve of u32 multiplication. For ALU64, if either operand is beyond u32's value range, we reject it. One thing to note, if the source operand is BPF_K, then we need to check "imm" field directly, and we'd reject it if it is negative. Because for ALU64, "imm" (with s32 type) is expected to be sign extended to s64 which NFP mul doesn't support. For ALU32, it is fine for "imm" be negative though, because the result is 32-bits and here is no difference on the low halve of result for signed/unsigned mul, so we will get correct result. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-07nfp: bpf: copy range info for all operands of all ALU operationsJiong Wang
NFP verifier hook is coping range information of the shift amount for indirect shift operation so optimized shift sequences could be generated. We want to use range info to do more things. For example, to decide whether multiplication and divide are supported on the given range. This patch simply let NFP verifier hook to copy range info for all operands of all ALU operands. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-07nfp: bpf: rename umin/umax to umin_src/umax_srcJiong Wang
The two fields are a copy of umin and umax info of bpf_insn->src_reg generated by verifier. Rename to make their meaning clear. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-06net: aquantia: vlan unicast address list correct handlingIgor Russkikh
Setting up macvlan/macvtap networks over atlantic NIC results in no traffic over these networks because ndo_set_rx_mode did not listed UC MACs as registered in unicast filter. Here we fix that taking into account maximum number of UC filters supported by hardware. If more than MAX addresses were registered, we just enable promisc and/or allmulti to pass the traffic in. We also remove MULTICAST_ADDRESS_MAX constant from aq_cfg since thats not a configurable parameter at all. Fixes: b21f502 ("net:ethernet:aquantia: Fix for multicast filter handling.") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-06liquidio: make timeout HZ independent and readableNicholas Mc Guire
schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent. So define a constant with (hopefully) meaningful name and pass it through msecs_to_jiffies() to fix the HZ dependency. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> commit f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Acked-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05cxgb4: Fix the condition to check if the card is T5Ganesh Goudar
Use 'chip_ver' rather than 'chip' to check if the card is T5. Fixes: e8d452923ae6 ("cxgb4: clean up init_one") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05qed: off by one in qed_parse_mcp_trace_buf()Dan Carpenter
If format_idx == s_mcp_trace_meta.formats_num then we read one element beyond the end of the s_mcp_trace_meta.formats[] array. Fixes: 50bc60cb155c ("qed*: Utilize FW 8.33.11.0") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: sun: remove redundant variables adv and lpa and mii_readsColin Ian King
Variables adv and lpa are being assigned but are never used hence they are redundant and can be removed. Also remove the unncessary mii_reads too. Cleans up clang warnings: warning: variable 'lpa' set but not used [-Wunused-but-set-variable] warning: variable 'adv' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: sfc: Make subdir logic consistent with other vendorsGeert Uytterhoeven
Both SFC and SFC_FALCON depend on NET_VENDOR_SOLARFLARE, hence use the latter to decide whether to descend into the sfc subdirectory. Move the rule to descend into sfc/falcon to the sfc subdirectory. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: Add missing VENDOR to Cadence and Packet Engines symbolsGeert Uytterhoeven
The vendor guard Kconfig symbols for Cadence and Packet Engines use a "NET_" prefix, while all other vendor guards use a "NET_VENDOR_" prefix. Hence make them consistent with the rest, and add the missing trailing "S" for Packet Engines while at it. As these options don't directly affect the kernel build, and default to "y", this change has no impact on kernels built with existing (def)configs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: Make NET_VENDOR_AURORA default to yesGeert Uytterhoeven
Enabling NET_VENDOR_* Kconfig options does not directly affect the kernel build. Hence NET_VENDOR_AURORA should default to yes, like other NET_VENDOR_* options. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05qlogic: netxen: remove various redundant variablesColin Ian King
Variables consumer, cmd_desc, end_cnt and no_of_desc are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'consumer' set but not used [-Wunused-but-set-variable] warning: variable 'cmd_desc' set but not used [-Wunused-but-set-variable] warning: variable 'end_cnt' set but not used [-Wunused-but-set-variable] warning: variable 'no_of_desc' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05bnxt_en: Add bnxt_en initial params table and register it.Vasundhara Volam
Create initial devlink parameters table for bnxt_en. Table consists of a permanent generic parameter. enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05mlx4: Add support for devlink reload and load driverinit valuesMoshe Shemesh
Add mlx4_devlink_reload() to support devlink reload operation. Add mlx4_devlink_param_load_driverinit_values() to load values which were set using driverinit configuration mode. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05mlx4: Add mlx4 initial parameters table and register itMoshe Shemesh
Create initial parameters table for mlx4. The table consists of two generic parameters and two driver-specific parameters. Generic: internal_err_reset - Enable reset device on internal errors. This parameter can be configured on mlx4 either on runtime or during driver initialization. max_macs - Max number of MACs per ETH port. For mlx4 this parameter value range is between 1 and 128. This parameter can be configured on mlx4 only during driver initialization. Driver specific: enable_64b_cqe_eqe - Enable 64 byte CQEs/EQEs when the FW supports it. This parameter can be configured on mlx4 only during driver initialization. enable_4k_uar - Enable using 4K UAR. This parameter can be configured on mlx4 only during driver initialization. Register the parameters table on mlx4_init_one() and unregister on mlx4_remove_one(). Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: tehuti: remove redundant pointer skbColin Ian King
Pointer skb is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'skb' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: socionext: remove redundant pointer ndevColin Ian King
Pointer ndev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'ndev' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: aquantia: Make some functions staticWei Yongjun
Fixes the following sparse warnings: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:525:5: warning: symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:536:5: warning: symbol 'hw_atl_utils_mpi_set_state' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05qed: Fix reading stale configuration informationDenis Bolotin
Configuration information read at driver load can become stale after it is updated. Mark information as not valid and re-populate when this happens. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-19 01:34:52 +0000