summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2020-04-21e1000: remove unneeded conversion to boolJason Yan
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/net/ethernet/intel/e1000/e1000_main.c:1479:44-49: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21i40e: Remove unneeded conversion to boolJason Yan
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/net/ethernet/intel/i40e/i40e_main.c:1614:52-57: WARNING: conversion to bool not needed here drivers/net/ethernet/intel/i40e/i40e_main.c:11439:52-57: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net/mlx5e: Get the latest values from counters in switchdev modeZhu Yanjun
In the switchdev mode, when running "cat /sys/class/net/NIC/statistics/tx_packets", the ppcnt register is accessed to get the latest values. But currently this command can not get the correct values from ppcnt. From firmware manual, before getting the 802_3 counters, the 802_3 data layout should be set to the ppcnt register. When the command "cat /sys/class/net/NIC/statistics/tx_packets" is run, before updating 802_3 data layout with ppcnt register, the monitor counters are tested. The test result will decide the 802_3 data layout is updated or not. Actually the monitor counters do not support to monitor rx/tx stats of 802_3 in switchdev mode. So the rx/tx counters change will not trigger monitor counters. So the 802_3 data layout will not be updated in ppcnt register. Finally this command can not get the latest values from ppcnt register with 802_3 data layout. Fixes: 5c7e8bbb0257 ("net/mlx5e: Use monitor counters for update stats") Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-20net/mlx5: Kconfig: convert imply usage to weak dependencySaeed Mahameed
MLX5_CORE uses the 'imply' keyword to depend on VXLAN, PTP_1588_CLOCK, MLXFW and PCI_HYPERV_INTERFACE. This was useful to force vxlan, ptp, etc.. to be reachable to mlx5 regardless of their config states. Due to the changes in the cited commit below, the semantics of 'imply' was changed to not force any restriction on the implied config. As a result of this change, the compilation of MLX5_CORE=y and VXLAN=m would result in undefined references, as VXLAN now would stay as 'm'. To fix this we change MLX5_CORE to have a weak dependency on these modules/configs and make sure they are reachable, by adding: depend on symbol || !symbol. For example: VXLAN=m MLX5_CORE=y, this will force MLX5_CORE to m Fixes: def2fbffe62c ("kconfig: allow symbols implied by y to become m") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Arnd Bergmann <arnd@arndb.de> Reported-by: Randy Dunlap <rdunlap@infradead.org>
2020-04-20net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overrunsMaxim Mikityanskiy
XSK wakeup function triggers NAPI by posting a NOP WQE to a special XSK ICOSQ. When the application floods the driver with wakeup requests by calling sendto() in a certain pattern that ends up in mlx5e_trigger_irq, the XSK ICOSQ may overflow. Multiple NOPs are not required and won't accelerate the process, so avoid posting a second NOP if there is one already on the way. This way we also avoid increasing the queue size (which might not help anyway). Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-20net/mlx5: CT: Change idr to xarray to protect parallel tuple id allocationPaul Blakey
After allowing parallel tuple insertion, we get the following trace: [ 5505.142249] ------------[ cut here ]------------ [ 5505.148155] WARNING: CPU: 21 PID: 13313 at lib/radix-tree.c:581 delete_node+0x16c/0x180 [ 5505.295553] CPU: 21 PID: 13313 Comm: kworker/u50:22 Tainted: G OE 5.6.0+ #78 [ 5505.304824] Hardware name: Supermicro Super Server/X10DRT-P, BIOS 2.0b 03/30/2017 [ 5505.313740] Workqueue: nf_flow_table_offload flow_offload_work_handler [nf_flow_table] [ 5505.323257] RIP: 0010:delete_node+0x16c/0x180 [ 5505.349862] RSP: 0018:ffffb19184eb7b30 EFLAGS: 00010282 [ 5505.356785] RAX: 0000000000000000 RBX: ffff904ac95b86d8 RCX: ffff904b6f938838 [ 5505.365190] RDX: 0000000000000000 RSI: ffff904ac954b908 RDI: ffff904ac954b920 [ 5505.373628] RBP: ffff904b4ac13060 R08: 0000000000000001 R09: 0000000000000000 [ 5505.382155] R10: 0000000000000000 R11: 0000000000000040 R12: 0000000000000000 [ 5505.390527] R13: ffffb19184eb7bfc R14: ffff904b6bef5800 R15: ffff90482c1203c0 [ 5505.399246] FS: 0000000000000000(0000) GS:ffff904c2fc80000(0000) knlGS:0000000000000000 [ 5505.408621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5505.415739] CR2: 00007f5d27006010 CR3: 0000000058c10006 CR4: 00000000001626e0 [ 5505.424547] Call Trace: [ 5505.428429] idr_alloc_u32+0x7b/0xc0 [ 5505.433803] mlx5_tc_ct_entry_add_rule+0xbf/0x950 [mlx5_core] [ 5505.441354] ? mlx5_fc_create+0x23c/0x370 [mlx5_core] [ 5505.448225] mlx5_tc_ct_block_flow_offload+0x874/0x10b0 [mlx5_core] [ 5505.456278] ? mlx5_tc_ct_block_flow_offload+0x63d/0x10b0 [mlx5_core] [ 5505.464532] nf_flow_offload_tuple.isra.21+0xc5/0x140 [nf_flow_table] [ 5505.472286] ? __kmalloc+0x217/0x2f0 [ 5505.477093] ? flow_rule_alloc+0x1c/0x30 [ 5505.482117] flow_offload_work_handler+0x1d0/0x290 [nf_flow_table] [ 5505.489674] ? process_one_work+0x17c/0x580 [ 5505.494922] process_one_work+0x202/0x580 [ 5505.500082] ? process_one_work+0x17c/0x580 [ 5505.505696] worker_thread+0x4c/0x3f0 [ 5505.510458] kthread+0x103/0x140 [ 5505.514989] ? process_one_work+0x580/0x580 [ 5505.520616] ? kthread_bind+0x10/0x10 [ 5505.525837] ret_from_fork+0x3a/0x50 [ 5505.570841] ---[ end trace 07995de9c56d6831 ]--- This happens from parallel deletes/adds to idr, as idr isn't protected. Fix that by using xarray as the tuple_ids allocator instead of idr. Fixes: 7da182a998d6 ("netfilter: flowtable: Use work entry per offload command") Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-20net/mlx5: Fix failing fw tracer allocation on s390Niklas Schnelle
On s390 FORCE_MAX_ZONEORDER is 9 instead of 11, thus a larger kzalloc() allocation as done for the firmware tracer will always fail. Looking at mlx5_fw_tracer_save_trace(), it is actually the driver itself that copies the debug data into the trace array and there is no need for the allocation to be contiguous in physical memory. We can therefor use kvzalloc() instead of kzalloc() and get rid of the large contiguous allcoation. Fixes: f53aaa31cce7 ("net/mlx5: FW tracer, implement tracer logic") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-20cxgb4: fix large delays in PTP synchronizationRahul Lakkireddy
Fetching PTP sync information from mailbox is slow and can take up to 10 milliseconds. Reduce this unnecessary delay by directly reading the information from the corresponding registers. Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: stmmac: dwmac-meson8b: Add missing boundary to RGMII TX clock arrayMarc Zyngier
Running with KASAN on a VIM3L systems leads to the following splat when probing the Ethernet device: ================================================================== BUG: KASAN: global-out-of-bounds in _get_maxdiv+0x74/0xd8 Read of size 4 at addr ffffa000090615f4 by task systemd-udevd/139 CPU: 1 PID: 139 Comm: systemd-udevd Tainted: G E 5.7.0-rc1-00101-g8624b7577b9c #781 Hardware name: amlogic w400/w400, BIOS 2020.01-rc5 03/12/2020 Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x20/0x30 dump_stack+0xec/0x148 print_address_description.isra.12+0x70/0x35c __kasan_report+0xfc/0x1d4 kasan_report+0x4c/0x68 __asan_load4+0x9c/0xd8 _get_maxdiv+0x74/0xd8 clk_divider_bestdiv+0x74/0x5e0 clk_divider_round_rate+0x80/0x1a8 clk_core_determine_round_nolock.part.9+0x9c/0xd0 clk_core_round_rate_nolock+0xf0/0x108 clk_hw_round_rate+0xac/0xf0 clk_factor_round_rate+0xb8/0xd0 clk_core_determine_round_nolock.part.9+0x9c/0xd0 clk_core_round_rate_nolock+0xf0/0x108 clk_core_round_rate_nolock+0xbc/0x108 clk_core_set_rate_nolock+0xc4/0x2e8 clk_set_rate+0x58/0xe0 meson8b_dwmac_probe+0x588/0x72c [dwmac_meson8b] platform_drv_probe+0x78/0xd8 really_probe+0x158/0x610 driver_probe_device+0x140/0x1b0 device_driver_attach+0xa4/0xb0 __driver_attach+0xcc/0x1c8 bus_for_each_dev+0xf4/0x168 driver_attach+0x3c/0x50 bus_add_driver+0x238/0x2e8 driver_register+0xc8/0x1e8 __platform_driver_register+0x88/0x98 meson8b_dwmac_driver_init+0x28/0x1000 [dwmac_meson8b] do_one_initcall+0xa8/0x328 do_init_module+0xe8/0x368 load_module+0x3300/0x36b0 __do_sys_finit_module+0x120/0x1a8 __arm64_sys_finit_module+0x4c/0x60 el0_svc_common.constprop.2+0xe4/0x268 do_el0_svc+0x98/0xa8 el0_svc+0x24/0x68 el0_sync_handler+0x12c/0x318 el0_sync+0x158/0x180 The buggy address belongs to the variable: div_table.63646+0x34/0xfffffffffffffa40 [dwmac_meson8b] Memory state around the buggy address: ffffa00009061480: fa fa fa fa 00 00 00 01 fa fa fa fa 00 00 00 00 ffffa00009061500: 05 fa fa fa fa fa fa fa 00 04 fa fa fa fa fa fa >ffffa00009061580: 00 03 fa fa fa fa fa fa 00 00 00 00 00 00 fa fa ^ ffffa00009061600: fa fa fa fa 00 01 fa fa fa fa fa fa 01 fa fa fa ffffa00009061680: fa fa fa fa 00 01 fa fa fa fa fa fa 04 fa fa fa ================================================================== Digging into this indeed shows that the clock divider array is lacking a final fence, and that the clock subsystems goes in the weeds. Oh well. Let's add the empty structure that indicates the end of the array. Fixes: bd6f48546b9c ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20net: systemport: Omit superfluous error message in bcm_sysport_probe()Tang Bin
In the function bcm_sysport_probe(), when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18net/mlx4_en: avoid indirect call in TX completionEric Dumazet
Commit 9ecc2d86171a ("net/mlx4_en: add xdp forwarding and data write support") brought another indirect call in fast path. Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call when/if CONFIG_RETPOLINE=y Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18net: stmmac: Fix sub-second incrementJulien Beraud
In fine adjustement mode, which is the current default, the sub-second increment register is the number of nanoseconds that will be added to the clock when the accumulator overflows. At each clock cycle, the value of the addend register is added to the accumulator. Currently, we use 20ns = 1e09ns / 50MHz as this value whatever the frequency of the ptp clock actually is. The adjustment is then done on the addend register, only incrementing every X clock cycles X being the ratio between 50MHz and ptp_clock_rate (addend = 2^32 * 50MHz/ptp_clock_rate). This causes the following issues : - In case the frequency of the ptp clock is inferior or equal to 50MHz, the addend value calculation will overflow and the default addend value will be set to 0, causing the clock to not work at all. (For instance, for ptp_clock_rate = 50MHz, addend = 2^32). - The resolution of the timestamping clock is limited to 20ns while it is not needed, thus limiting the accuracy of the timestamping to 20ns. Fix this by setting sub-second increment to 2e09ns / ptp_clock_rate. It will allow to reach the minimum possible frequency for ptp_clk_ref, which is 5MHz for GMII 1000Mps Full-Duplex by setting the sub-second-increment to a higher value. For instance, for 25MHz, it gives ssinc = 80ns and default_addend = 2^31. It will also allow to use a lower value for sub-second-increment, thus improving the timestamping accuracy with frequencies higher than 100MHz, for instance, for 200MHz, ssinc = 10ns and default_addend = 2^31. v1->v2: - Remove modifications to the calculation of default addend, which broke compatibility with clock frequencies for which 2000000000 / ptp_clk_freq is not an integer. - Modify description according to discussions. Signed-off-by: Julien Beraud <julien.beraud@orolia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-18net: stmmac: fix enabling socfpga's ptp_ref_clockJulien Beraud
There are 2 registers to write to enable a ptp ref clock coming from the fpga. One that enables the usage of the clock from the fpga for emac0 and emac1 as a ptp ref clock, and the other to allow signals from the fpga to reach emac0 and emac1. Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will be written and the ptp ref clock will be set as coming from the fpga. Separate the 2 register writes to only enable signals from the fpga to reach emac0 or emac1 when ptp ref clock is not coming from the fpga. Signed-off-by: Julien Beraud <julien.beraud@orolia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-16amd-xgbe: Use __napi_schedule() in BH contextSebastian Andrzej Siewior
The driver uses __napi_schedule_irqoff() which is fine as long as it is invoked with disabled interrupts by everybody. Since the commit mentioned below the driver may invoke xgbe_isr_task() in tasklet/softirq context. This may lead to list corruption if another driver uses __napi_schedule_irqoff() in IRQ context. Use __napi_schedule() which safe to use from IRQ and softirq context. Fixes: 85b85c853401d ("amd-xgbe: Re-issue interrupt if interrupt status not cleared") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-16net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizesFlorian Fainelli
After commit bfcb813203e619a8960a819bf533ad2a108d8105 ("net: dsa: configure the MTU for switch ports") my Lamobo R1 platform which uses an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail by rejecting a MTU of 1536. The reason for that is that the DMA capabilities are not readable on this version of the IP, and there is also no 'tx-fifo-depth' property being provided in Device Tree. The property is documented as optional, and is not provided. Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so provide these values through platform data as an immediate fix until various Device Tree sources get updated accordingly. Fixes: eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values") Suggested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15net: tulip: make early_486_chipsets staticJason Yan
Fix the following sparse warning: drivers/net/ethernet/dec/tulip/tulip_core.c:1280:28: warning: symbol 'early_486_chipsets' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridgeVladimir Oltean
To rehash a previous explanation given in commit 1c44ce560b4d ("net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up"), the switch driver operates the in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. The configuration for this native VLAN is driven in 2 ways: - Set the egress port rewriter to strip the VLAN tag for the native VID (as it is egress-untagged, after all). - Configure the ingress port to drop untagged and priority-tagged traffic, if there is no native VLAN. The intention of this setting is that a trunk port with no native VLAN should not accept untagged traffic. Since both of the above configurations for the native VLAN should only be done if VLAN awareness is requested, they are actually done from the ocelot_port_vlan_filtering function, after the basic procedure of toggling the VLAN awareness flag of the port. But there's a problem with that simplistic approach: we are trying to juggle with 2 independent variables from a single function: - Native VLAN of the port - its value is held in port->vid. - VLAN awareness state of the port - currently there are some issues here, more on that later*. The actual problem can be seen when enslaving the switch ports to a VLAN filtering bridge: 0. The driver configures a pvid of zero for each port, when in standalone mode. While the bridge configures a default_pvid of 1 for each port that gets added as a slave to it. 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true. The VLAN-filtering-dependent portion of the native VLAN configuration is done, considering that the native VLAN is 0. 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true, untagged=true. The native VLAN changes to 1 (change which gets propagated to hardware). 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the VLAN-filtering-dependent portion of the native VLAN configuration, for the new native VLAN of 1. One can notice that after toggling "ip link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0 type bridge vlan_filtering 1", the new native VLAN finally makes it through and untagged traffic finally starts flowing again. But obviously that shouldn't be needed. So it is clear that 2 independent variables need to both re-trigger the native VLAN configuration. So we introduce the second variable as ocelot_port->vlan_aware. *Actually both the DSA Felix driver and the Ocelot driver already had each its own variable: - Ocelot: ocelot_port_private->vlan_aware - Felix: dsa_port->vlan_filtering but the common Ocelot library needs to work with a single, common, variable, so there is some refactoring done to move the vlan_aware property from the private structure into the common ocelot_port structure. Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14net/cxgb4: Check the return from t4_query_params properlyJason Gunthorpe
Positive return values are also failures that don't set val, although this probably can't happen. Fixes gcc 10 warning: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized] 3747 | *phy_fw_ver = val; Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14net: stmmac: socfpga: Allow all RGMII modesAtsushi Nemoto
Allow all the RGMII modes to be used. (Not only "rgmii", "rgmii-id" but "rgmii-txid", "rgmii-rxid") Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14ionic: fix unused assignmentShannon Nelson
Remove an unused initialized value. Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14ionic: add dynamic_debug headerShannon Nelson
Add the appropriate header for using dynamic_hex_dump(), which seems to be incidentally included in some configurations but not all. Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-12net: mvneta: Fix a typoChristophe JAILLET
s/mvmeta/mvneta/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-12net: ethernet: ti: Add missing '\n' in log messagesChristophe JAILLET
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-04-12net: neterion: remove redundant assignment to variable tmp64Colin Ian King
The variable tmp64 is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-04-08net/mlx5e: CT: Use rhashtable's ct entries instead of a separate listPaul Blakey
Fixes CT entries list corruption. After allowing parallel insertion/removals in upper nf flow table layer, unprotected ct entries list can be corrupted by parallel add/del on the same flow table. CT entries list is only used while freeing a ct zone flow table to go over all the ct entries offloaded on that zone/table, and flush the table. As rhashtable already provides an api to go over all the inserted entries, fix the race by using the rhashtable iteration instead, and remove the list. Fixes: 7da182a998d6 ("netfilter: flowtable: Use work entry per offload command") Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-08net/mlx5e: Fix devlink port netdev unregistration sequenceParav Pandit
In cited commit netdevice is registered after devlink port. Unregistration flow should be mirror sequence of registration flow. Hence, unregister netdevice before devlink port. Fixes: 31e87b39ba9d ("net/mlx5e: Fix devlink port register sequence") Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-08net/mlx5e: Fix pfnum in devlink port attributeParav Pandit
Cited patch missed to extract PCI pf number accurately for PF and VF port flavour. It considered PCI device + function number. Due to this, device having non zero device number shown large pfnum. Hence, use only PCI function number; to avoid similar errors, derive pfnum one time for all port flavours. Fixes: f60f315d339e ("net/mlx5e: Register devlink ports for physical link, PCI PF, VFs") Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-08net/mlx5e: Fix missing pedit action after ct clear actionRoi Dayan
With ct clear action we should not allocate the action in hw and not release the mod_acts parsed in advance. It will be done when handling the ct clear action. Fixes: 1ef3018f5af3 ("net/mlx5e: CT: Support clear action") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-08net/mlx5e: Fix nest_level for vlan pop actionDmytro Linkin
Current value of nest_level, assigned from net_device lower_level value, does not reflect the actual number of vlan headers, needed to pop. For ex., if we have untagged ingress traffic sended over vlan devices, instead of one pop action, driver will perform two pop actions. To fix that, calculate nest_level as difference between vlan device and parent device lower_levels. Fixes: f3b0a18bb6cb ("net: remove unnecessary variables and callback") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-08net/mlx5e: Add missing release firmware callEran Ben Elisha
Once driver finishes flashing the firmware image, it should release it. Fixes: 9c8bca2637b8 ("mlx5: Move firmware flash implementation to devlink") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-08net/mlx5: Fix condition for termination table cleanupEli Cohen
When we destroy rules from slow path we need to avoid destroying termination tables since termination tables are never created in slow path. By doing so we avoid destroying the termination table created for the slow path. Fixes: d8a2034f152a ("net/mlx5: Don't use termination tables in slow path") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-08net/mlx5: Fix frequent ioread PCI access during recoveryMoshe Shemesh
High frequency of PCI ioread calls during recovery flow may cause the following trace on powerpc: [ 248.670288] EEH: 2100000 reads ignored for recovering device at location=Slot1 driver=mlx5_core pci addr=0000:01:00.1 [ 248.670331] EEH: Might be infinite loop in mlx5_core driver [ 248.670361] CPU: 2 PID: 35247 Comm: kworker/u192:11 Kdump: loaded Tainted: G OE ------------ 4.14.0-115.14.1.el7a.ppc64le #1 [ 248.670425] Workqueue: mlx5_health0000:01:00.1 health_recover_work [mlx5_core] [ 248.670471] Call Trace: [ 248.670492] [c00020391c11b960] [c000000000c217ac] dump_stack+0xb0/0xf4 (unreliable) [ 248.670548] [c00020391c11b9a0] [c000000000045818] eeh_check_failure+0x5c8/0x630 [ 248.670631] [c00020391c11ba50] [c00000000068fce4] ioread32be+0x114/0x1c0 [ 248.670692] [c00020391c11bac0] [c00800000dd8b400] mlx5_error_sw_reset+0x160/0x510 [mlx5_core] [ 248.670752] [c00020391c11bb60] [c00800000dd75824] mlx5_disable_device+0x34/0x1d0 [mlx5_core] [ 248.670822] [c00020391c11bbe0] [c00800000dd8affc] health_recover_work+0x11c/0x3c0 [mlx5_core] [ 248.670891] [c00020391c11bc80] [c000000000164fcc] process_one_work+0x1bc/0x5f0 [ 248.670955] [c00020391c11bd20] [c000000000167f8c] worker_thread+0xac/0x6b0 [ 248.671015] [c00020391c11bdc0] [c000000000171618] kthread+0x168/0x1b0 [ 248.671067] [c00020391c11be30] [c00000000000b65c] ret_from_kernel_thread+0x5c/0x80 Reduce the PCI ioread frequency during recovery by using msleep() instead of cond_resched() Fixes: 3e5b72ac2f29 ("net/mlx5: Issue SW reset on FW assert") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-08ionic: set station addr only if neededShannon Nelson
The code was working too hard and in some cases was trying to delete filters that weren't there, generating a potentially misleading error message. IONIC_CMD_RX_FILTER_DEL (32) failed: IONIC_RC_ENOENT (-2) Fixes: 2a654540be10 ("ionic: Add Rx filter and rx_mode ndo support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-08ionic: replay filters after fw upgradeShannon Nelson
The NIC's filters are lost in the midst of the fw-upgrade so we need to replay them into the FW. We also remove the unused ionic_rx_filter_del() function. Fixes: c672412f6172 ("ionic: remove lifs on fw reset") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07net: ethernet: mediatek: move mt7623 settings out off the mt7530René van Dorst
Moving mt7623 logic out off mt7530, is required to make hardware setting consistent after we introduce phylink to mtk driver. Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Reviewed-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07net: fec: set GPR bit on suspend by DT configuration.Martin Fuzzey
On some SoCs, such as the i.MX6, it is necessary to set a bit in the SoC level GPR register before suspending for wake on lan to work. The fec platform callback sleep_mode_enable was intended to allow this but the platform implementation was NAK'd back in 2015 [1] This means that, currently, wake on lan is broken on mainline for the i.MX6 at least. So implement the required bit setting in the fec driver by itself by adding a new optional DT property indicating the GPR register and adding the offset and bit information to the driver. [1] https://www.spinics.net/lists/netdev/msg310922.html Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Slave bond and team devices should not be assigned ipv6 link local addresses, from Jarod Wilson. 2) Fix clock sink config on some at803x PHY devices, from Oleksij Rempel. 3) Uninitialized stack space transmitted in slcan frames, fix from Richard Palethorpe. 4) Guard HW VLAN ops properly in stmmac driver, from Jose Abreu. 5) "=" --> "|=" fix in aquantia driver, from Colin Ian King. 6) Fix TCP fallback in mptcp, from Florian Westphal. (accessing a plain tcp_sk as if it were an mptcp socket). 7) Fix cavium driver in some configurations wrt. PTP, from Yue Haibing. 8) Make ipv6 and ipv4 consistent in the lower bound allowed for neighbour entry retrans_time, from Hangbin Liu. 9) Don't use private workqueue in pegasus usb driver, from Petko Manolov. 10) Fix integer overflow in mlxsw, from Colin Ian King. 11) Missing refcnt init in cls_tcindex, from Cong Wang. 12) One too many loop iterations when processing cmpri entries in ipv6 rpl code, from Alexander Aring. 13) Disable SG and TSO by default in r8169, from Heiner Kallweit. 14) NULL deref in macsec, from Davide Caratti. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits) macsec: fix NULL dereference in macsec_upd_offload() skbuff.h: Improve the checksum related comments net: dsa: bcm_sf2: Ensure correct sub-node is parsed qed: remove redundant assignment to variable 'rc' wimax: remove some redundant assignments to variable result mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLE mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_PRIORITY r8169: change back SG and TSO to be disabled by default net: dsa: bcm_sf2: Do not register slave MDIO bus with OF ipv6: rpl: fix loop iteration tun: Don't put_page() for all negative return values from XDP program net: dsa: mt7530: fix null pointer dereferencing in port5 setup mptcp: add some missing pr_fmt defines net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers net_sched: fix a missing refcnt in tcindex_init() net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting mlxsw: spectrum_trap: fix unintention integer overflow on left shift pegasus: Remove pegasus' own workqueue neigh: support smaller retrans_time settting net: openvswitch: use hlist_for_each_entry_rcu instead of hlist_for_each_entry ...
2020-04-06qed: remove redundant assignment to variable 'rc'Colin Ian King
The variable 'rc' is being assigned a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-06mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLEPetr Machata
The handler for FLOW_ACTION_VLAN_MANGLE ends by returning whatever the lower-level function that it calls returns. If there are more actions lined up after this action, those are never offloaded. Fix by only bailing out when the called function returns an error. Fixes: a150201a70da ("mlxsw: spectrum: Add support for vlan modify TC action") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-06mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_PRIORITYPetr Machata
The handler for FLOW_ACTION_PRIORITY ends by returning whatever the lower-level function that it calls returns. If there are more actions lined up after this action, those are never offloaded. Fix by only bailing out when the called function returns an error. Fixes: 463957e3fbab ("mlxsw: spectrum_flower: Offload FLOW_ACTION_PRIORITY") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-06r8169: change back SG and TSO to be disabled by defaultHeiner Kallweit
There has been a number of reports that using SG/TSO on different chip versions results in tx timeouts. However for a lot of people SG/TSO works fine. Therefore disable both features by default, but allow users to enable them. Use at own risk! Fixes: 93681cd7d94f ("r8169: enable HW csum and TSO") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-03net: stmmac: dwmac1000: fix out-of-bounds mac address reg settingJisheng Zhang
Commit 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries") cleared the unused mac address entries, but introduced an out-of bounds mac address register programming bug -- After setting the secondary unicast mac addresses, the "reg" value has reached netdev_uc_count() + 1, thus we should only clear address entries if (addr < perfect_addr_number) Fixes: 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-03Merge tag 'pci-v5.7-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-04-02mlxsw: spectrum_trap: fix unintention integer overflow on left shiftColin Ian King
Shifting the integer value 1 is evaluated using 32-bit arithmetic and then used in an expression that expects a 64-bit value, so there is potentially an integer overflow. Fix this by using the BIT_ULL macro to perform the shift and avoid the overflow. Addresses-Coverity: ("Unintentional integer overflow") Fixes: 13f2e64b94ea ("mlxsw: spectrum_trap: Add devlink-trap policer support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02net: stmmac: xgmac: Fix VLAN register handlingJose Abreu
Commit 907a076881f1, forgot that we need to clear old values of XGMAC_VLAN_TAG register when we switch from VLAN perfect matching to HASH matching. Fix it. Fixes: 907a076881f1 ("net: stmmac: xgmac: fix incorrect XGMAC_VLAN_TAG register writting") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02net: cavium: Fix build errors due to 'imply CAVIUM_PTP'YueHaibing
If CAVIUM_PTP is m and THUNDER_NIC_VF is y, build fails: drivers/net/ethernet/cavium/thunder/nicvf_main.o: In function 'nicvf_remove': nicvf_main.c:(.text+0x1f0): undefined reference to 'cavium_ptp_put' drivers/net/ethernet/cavium/thunder/nicvf_main.o: In function `nicvf_probe': nicvf_main.c:(.text+0x557c): undefined reference to 'cavium_ptp_get' THUNDER_NIC_VF imply CAVIUM_PTP, which allow the config now, Use IS_REACHABLE() to avoid the vmlinux link error for this case. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: def2fbffe62c ("kconfig: allow symbols implied by y to become m") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02net: atlantic: fix missing | operator when assigning rec->llcColin Ian King
rec->llc is currently being assigned twice, once with the lower 8 bits from packed_record[8] and then re-assigned afterwards with data from packed_record[9]. This looks like a type, I believe the second assignment should be using the |= operator rather than a direct assignment. Addresses-Coverity: ("Unused value") Fixes: b8f8a0b7b5cb ("net: atlantic: MACSec ingress offload HW bindings") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Igor Russkikh <irusskikh@marell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02net: qualcomm: rmnet: Allow configuration updates to existing devicesSubash Abhinov Kasiviswanathan
This allows the changelink operation to succeed if the mux_id was specified as an argument. Note that the mux_id must match the existing mux_id of the rmnet device or should be an unused mux_id. Fixes: 1dc49e9d164c ("net: rmnet: do not allow to change mux id if mux id is duplicated") Reported-and-tested-by: Alex Elder <elder@linaro.org> Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "The majority of the patches are cleanups, refactorings and clarity improvements. This cycle saw some more activity from Syzkaller, I think we are now clean on all but one of those bugs, including the long standing and obnoxious rdma_cm locking design defect. Continue to see many drivers getting cleanups, with a few new user visible features. Summary: - Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1 - Lots of cleanup patches for hns - Convert more places to use refcount - Aggressively lock the RDMA CM code that syzkaller says isn't working - Work to clarify ib_cm - Use the new ib_device lifecycle model in bnxt_re - Fix mlx5's MR cache which seems to be failing more often with the new ODP code - mlx5 'dynamic uar' and 'tx steering' user interfaces" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits) RDMA/bnxt_re: make bnxt_re_ib_init static IB/qib: Delete struct qib_ivdev.qp_rnd RDMA/hns: Fix uninitialized variable bug RDMA/hns: Modify the mask of QP number for CQE of hip08 RDMA/hns: Reduce the maximum number of extend SGE per WQE RDMA/hns: Reduce PFC frames in congestion scenarios RDMA/mlx5: Add support for RDMA TX flow table net/mlx5: Add support for RDMA TX steering IB/hfi1: Call kobject_put() when kobject_init_and_add() fails IB/hfi1: Fix memory leaks in sysfs registration and unregistration IB/mlx5: Move to fully dynamic UAR mode once user space supports it IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib IB/mlx5: Extend QP creation to get uar page index from user space IB/mlx5: Extend CQ creation to get uar page index from user space IB/mlx5: Expose UAR object and its alloc/destroy commands IB/hfi1: Get rid of a warning RDMA/hns: Remove redundant judgment of qp_type RDMA/hns: Remove redundant assignment of wc->smac when polling cq RDMA/hns: Remove redundant qpc setup operations RDMA/hns: Remove meaningless prints ...
2020-04-01net: stmmac: Fix VLAN filtering when HW does not support itJose Abreu
If we don't have any filters available we can't rely upon the return code of stmmac_add_hw_vlan_rx_fltr() / stmmac_del_hw_vlan_rx_fltr(). Add a check for this. Fixes: ed64639bc1e0 ("net: stmmac: Add support for VLAN Rx filtering") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-27 17:40:38 +0000