| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-03-09
This series provides updates to mlx5 driver:
1) Use vport metadata matching only when mandatory
2) Introduce root flow table and ethtool steering for uplink representors
3) Expose port speed via FW when link modes are not available
3) Misc cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since kernel already has logs after kzalloc fails,
it's unnecessary to print duplicate logs. So this
patch deletes these logs.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch modifies some printing relating to reset issue.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a local variable to save the command code in
some dump cases which need to modify the command code, then
the failing command code can be print out for debugging.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When received an unknown vector 0 interrupt, there is not a
helpful information for user to realize that now. So this patch
prints out the value of the status register for this case, and
uses dev_info() instead of dev_dbg() in hclge_check_event_cause().
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When setting VF's MAC from PF, if the VF driver not loaded, the
firmware will return error to PF.
So PF should check whether VF is alive before sending message to
VF when setting VF's MAC.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In hclge_add_mc_addr_common() and hclge_rm_mc_addr_common(),
variable req had been set as "0" by memset(), so it's unnecessary
to set .entry_type field as "0" with hnae3_set_bit() again.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In hclge_handle_hw_ras_error(), it is unnecessary to check
HCLGE_STATE_RST_HANDLING flag, because the reset priority
has been ensured by the process itself.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The name of macro HCLGE_MAX_NCL_CONFIG_LENGTH is inaccurate,
this patch renames it to HCLGE_NCL_CONFIG_LENGTH_IN_EACH_CMD.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch cleans up some incorrect type in assignment reported by sparse
and compiler.
The warning as below:
- warning : restricted __le16 degrades to integer
- warning : cast from restricted __le32
- warning : cast from restricted __be32
- warning : cast from restricted __be16
and "mixed operation".
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the default kernel version in ethtool drv_info output
and drop the module version.
Cc: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for the management port device id. This is to
capture the device and set it up for devlink use, but not set
it up for network operations. We still use a netdev object
in order to use the napi infrasucture for processing adminq
and notifyq messages, we just don't register the netdev.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Print the PCI bus lane information so people can keep an
eye out for poor configurations that might not support
the advertised speed.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can disable rxhashing by setting rss_types to 0. The user
can toggle this with "ethtool -K <ethX> rxhash off|on",
which calls into the .ndo_set_features callback with the
NETIF_F_RXHASH feature bit set or cleared. This patch adds
a check for that bit and updates the FW if necessary.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the unused flags field and and fix the bitflag names
to include the _F_ flag hint.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Spreading the interrupts across the CPU cores is good for load
balancing, but not necessarily as good when using a CPU/core
that is not part of the NUMA local CPU. If it can be localized,
the kernel's cpumask_local_spread() service will pick a core
that is on the node close to the PCI device.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace the misguided "#pragma packed" with tags on each
struct/union definition that actually needs it. This is safer
and more efficient on the various compilers and architectures.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the basic ionic interface works but the lif creation fails,
don't fail the probe. This will allow us to use the driver to
help inspect the hw/fw/pci interface for debugging purposes.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until ae84bc187337 ("r8169: don't use bit LastFrag in tx descriptor
after send") we used to access another bit in the descriptor, therefore
it seems the barrier was needed. Since this commit DescOwn is the
only bit we're interested in, so the barrier isn't needed any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the parameters taken by rtl8169_unmap_tx_skb, this makes
usage of this function easier to read and understand.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far tx_skb->skb is the only member of the two structs that is not
reset. Make understanding the code easier by resetting both structs
completely in rtl8169_unmap_tx_skb.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Slightly improve the code by converting this while to a for loop.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
What the driver writes into MAC_MAXLEN_CFG does not actually represent
VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are
numerically equal, but the difference is important, as the switch treats
VLAN-tagged traffic specially and knows to increase the maximum accepted
frame size automatically. So it is always wrong to account for VLAN in
the MAC_MAXLEN_CFG register.
Unconditionally increase the maximum allowed frame size for
double-tagged traffic. Accounting for the additional length does not
mean that the other VLAN membership checks aren't performed, so there's
no harm done.
Also, stop abusing the MTU name for configuring the MRU. There is no
support for configuring the MRU on an interface at the moment.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Fixes: fa914e9c4d94 ("net: mscc: ocelot: create a helper for changing the port MTU")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's a resource, not a parameter, so we can't copy it into the new
channel's TX queues, otherwise aliasing will lead to resource-
management bugs if the channel is subsequently torn down without
being initialised.
Before the Fixes:-tagged commit there was a similar bug with
tsoh_page, but I'm not sure it's worth doing another fix for such
old kernels.
Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2")
Suggested-by: Derek Shute <Derek.Shute@stratus.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reuse infrastructure that already exists for pf in legacy mode to show/set
Rx network flow classification rules for uplink representors.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
|
|
During transition to uplink representors the code responsible for
initializing ethtool steering functionality wasn't added to representor
init rx routine. This causes NULL pointer dereference during configuration
of network flow classification rule with ethtool (only possible to
reproduce with next commit in this series which registers necessary ethtool
callbacks).
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
|
|
Reuse infrastructure that already exists for pf in legacy mode to show/set
Rx flow hash indirection table and RSS hash key for uplink representors.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
|
|
Uplink representor traffic will be redirected to an empty root ft rather
than directly to a direct tir or ttc table, this root ft will be empty and
will be used as a link for auto-chaining with ttc table or ethtool tables
in downstream patches.
On load, fs core will connect uplink rep root_ft with ttc table. In case
ethtool steering will be used, fs core will auto connect root_ft with
the ethtool bypass tables, which will be connected with the ttc table.
vport_rx_rule[uplink_rep]->root_ft->ethtool->ttc.
For non-uplink representors, for simplicity root_ft will always point at
ttc table, hence the replace vport_rx rule logic is removed.
vport_rx_rule[non_uplink_rep]->root_ft(ttc).
For now ethtool steering support can only be available on uplink rep.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
|
|
mlx5_eswitch_inline_mode_get() is used only in eswitch_offloads.c.
Hence, make it static and adjacent to its caller function.
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Instead of giving ft tables one of the largest tables available - 4M,
give it a more reasonable size - 64k. Especially since it will
always be created as a miss hook in the following patch.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The esw_vport_tbl_get() function returns error pointers on error.
Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
According to PRM, forward to flow table along with either packet
reformat or decap is supported only if reformat_and_fwd_to_table
capability is set for the flow table.
Add dependency on the capability and pack all the conditions for "goto
chain" in a single function.
Fix language in error message in case of not supporting forward to a
lower numbered flow table.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Multi-port RoCE mode requires tagging traffic that passes through the
vport.
This matching can cause performance degradation, therefore disable it
and use the legacy matching on vhca_id and source_port when possible.
Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Use reverse chirstmas tree inside mlx5e_ethtool_get_link_ksettings.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When port speed can't be reported based on ext_eth_proto_capability
or eth_proto_capability instead of reporting speed as unknown check
if the port's speed can be inferred based on the data_rate_oper field.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
This series adds some HW bits and definitions for mlx5 driver, to be
used by downstream features in both rdma and netdev branches.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: HW bit for goto chain offload support
net/mlx5: Expose link speed directly
net/mlx5: Introduce TLS and IPSec objects enums
net/mlx5: Introduce egress acl forward-to-vport capability
net/mlx5: Expose raw packet pacing APIs
net/mlx5e: Replace zero-length array with flexible-array member
net/mlx5: fix spelling mistake "reserverd" -> "reserved"
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Commit a8d0f11ee50d ("MIPS: SGI-IP27: Enable ethernet phy on second
Origin 200 module") fixes the root cause of not detected PHYs.
Therefore the workaround can go away now.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If there is no valid MAC address in the device tree, use a random
MAC address.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow the initialization of the MAC to be performed even if the
device tree does not provide a valid MAC address. Later a random
MAC address should be assigned by the Ethernet driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reuse the set_mac_address() in the init() function.
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to other drivers, properly clear the devlink port type when
removing the device before unregistration.
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If firmware command returns error code as HWRM_ERR_CODE_BUSY, which
means it cannot handle the command due to a conflicting command
from another function, convert it to -EAGAIN. If it is an ethtool
operation, this error code will be returned to userspace.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Return code is not needed in some of these functions, as the return
code from firmware message is ignored. Remove the unused rc variable
and also convert functions to void.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As part of converting error code in firmware message to standard
code, checking for firmware return code is removed in most of the
places. Remove the assignment of return code where the function
can directly return.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver stores a copy of the DCB settings that have been applied to
the firmware. After firmware reset, the firmware settings are gone and
will revert back to default. Clear the driver's copy so that if there
is a DCBNL request to get the settings, the driver will retrieve the
current settings from the firmware. lldpad keeps the DCB settings in
userspace and will re-apply the settings if it is running.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we are in continuous NAPI polling mode, the current code in
bnxt_poll_p5() will only process the completion rings and will not
process the NQ until interrupt is re-enabled. Tis logic works and
will not cause RX or TX starvation, but async events in the NQ may
be delayed for the duration of continuous NAPI polling. These
async events may be firmware or VF events.
Continue to handle the NQ after we are done polling the completion
rings. This actually simplies the code in bnxt_poll_p5().
Acknowledge the NQ so these async events will not overflow.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the function by removing tha 'all' parameter. In the current
code, the caller has to specify whether to update/arm both completion
rings with the 'all' parameter.
Instead of this, we can just update/arm all the completion rings
that have been polled. By setting cpr->had_work_done earlier in
__bnxt_poll_work(), we know which completion ring has been polled
and can just update/arm all the completion rings with
cpr->had_work_done set.
This simplifies the function with one less parameter and works just
as well.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In bnxt_poll_p5(), the logic polls for up to 2 completion rings (RX and
TX) for work. In the current code, if we reach budget polling the
first completion ring, we will stop. If the other completion ring
has work to do, we will handle it when NAPI calls us back.
This is not optimal. We potentially leave an unproceesed entry in
the NQ. When we are finally done with NAPI polling and re-enable
interrupt, the remaining entry in the NQ will cause interrupt to
be triggered immediately for no reason.
Modify the code in bnxt_poll_p5() to keep looping until all NQ
entries are handled even if the first completion ring has reached
budget.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The rmnet_vnd_setup(), which is the callback of ->ndo_start_xmit() is
allowed to call concurrently because it uses RCU protected data.
So, it doesn't need tx lock.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that
there is no need to manually strip it for such packets. The enhanced DMA
descriptors allow to flag LLC packets so that the receiving callback can
use that to strip FCS manually or not. On the other hand, normal
descriptors do not support that.
Thus in order to not truncate LLC packet ACS should be disabled when
using normal DMA descriptors.
Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
