summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2020-03-30net: hns3: fix set and get link ksettings issueGuangbin Huang
When device is not open, the service task which update the port information per second is not running. In this case, the port capabilities, including speed ability, autoneg ability, media type, may be incorrect. Then get/set link ksetting may fail. This patch fixes it by updating the port information before getting/ setting link ksettings when device is not open, and start timer task immediately by setting delay time to 0 when device opens. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: fix RSS config lost after VF reset.Guojia Liao
Currently, VF's RSS configuration would be set to default after VF reset, the the user's one will loss. To fix it, this patch separates hclgevf_rss_init_hw() into two parts, one sets up the default RSS configuration and just be called when driver loading, one configures the hardware and be called by driver loading or reset. Fixes: d97b30721301 ("net: hns3: Add RSS tuples support for VF") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: fix for fraglist SKB headlen not handling correctlyHuazhong Tan
When the fraglist SKB headlen is larger than zero, current code still handle the fraglist SKB linear data as frag data, which may cause TX error. This patch adds a new DESC_TYPE_FRAGLIST_SKB type to handle the mapping and unmapping of the fraglist SKB linear data buffer. Fixes: 8ae10cfb5089 ("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: hns3: drop the WQ_MEM_RECLAIM flag when allocating WQYunsheng Lin
The WQ in hns3 driver is allocated with WQ_MEM_RECLAIM flag in order to guarantee forward progress, which may cause hns3' WQ_MEM_RECLAIM WQ flushing infiniband' !WQ_MEM_RECLAIM WQ warning: [11246.200168] hns3 0000:bd:00.1: Reset done, hclge driver initialization finished. [11246.209979] hns3 0000:bd:00.1 eth7: net open [11246.227608] ------------[ cut here ]------------ [11246.237370] workqueue: WQ_MEM_RECLAIM hclge:hclge_service_task [hclge] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [11246.237391] WARNING: CPU: 50 PID: 2279 at ./kernel/workqueue.c:2605 check_flush_dependency+0xcc/0x140 [11246.260412] Modules linked in: hclgevf hns_roce_hw_v2 rdma_test(O) hns3 xt_CHECKSUM iptable_mangle xt_conntrack ipt_REJECT nf_reject_ipv4 ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bpfilter vfio_iommu_type1 vfio_pci vfio_virqfd vfio ib_isert iscsi_target_mod ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi aes_ce_blk crypto_simd cryptd aes_ce_cipher sunrpc nls_iso8859_1 crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce joydev input_leds hid_generic usbkbd usbmouse sbsa_gwdt usbhid usb_storage hid ses hclge hisi_zip hisi_hpre hisi_sec2 hnae3 hisi_qm ahci hisi_trng_v2 evbug uacce rng_core gpio_dwapb autofs4 hisi_sas_v3_hw megaraid_sas hisi_sas_main libsas scsi_transport_sas [last unloaded: hns_roce_hw_v2] [11246.325742] CPU: 50 PID: 2279 Comm: kworker/50:0 Kdump: loaded Tainted: G O 5.4.0-rc4+ #1 [11246.335181] Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B140.01 12/18/2019 [11246.344802] Workqueue: hclge hclge_service_task [hclge] [11246.350007] pstate: 60c00009 (nZCv daif +PAN +UAO) [11246.354779] pc : check_flush_dependency+0xcc/0x140 [11246.359549] lr : check_flush_dependency+0xcc/0x140 [11246.364317] sp : ffff800268a73990 [11246.367618] x29: ffff800268a73990 x28: 0000000000000001 [11246.372907] x27: ffffcbe4f5868000 x26: ffffcbe4f5541000 [11246.378196] x25: 00000000000000b8 x24: ffff002fdd0ff868 [11246.383483] x23: ffff002fdd0ff800 x22: ffff2027401ba600 [11246.388770] x21: 0000000000000000 x20: ffff002fdd0ff800 [11246.394059] x19: ffff202719293b00 x18: ffffcbe4f5541948 [11246.399347] x17: 000000006f8ad8dd x16: 0000000000000002 [11246.404634] x15: ffff8002e8a734f7 x14: 6c66207369205d65 [11246.409922] x13: 676c63685b206b73 x12: 61745f6563697672 [11246.415208] x11: 65735f65676c6368 x10: 3a65676c6368204d [11246.420494] x9 : 49414c4345525f4d x8 : 6e6162696e69666e [11246.425782] x7 : 69204d49414c4345 x6 : ffffcbe4f5765145 [11246.431068] x5 : 0000000000000000 x4 : 0000000000000000 [11246.436355] x3 : 0000000000000030 x2 : 00000000ffffffff [11246.441642] x1 : 3349eb1ac5310100 x0 : 0000000000000000 [11246.446928] Call trace: [11246.449363] check_flush_dependency+0xcc/0x140 [11246.453785] flush_workqueue+0x110/0x410 [11246.457691] ib_cache_cleanup_one+0x54/0x468 [11246.461943] __ib_unregister_device+0x70/0xa8 [11246.466279] ib_unregister_device+0x2c/0x40 [11246.470455] hns_roce_exit+0x34/0x198 [hns_roce_hw_v2] [11246.475571] __hns_roce_hw_v2_uninit_instance.isra.56+0x3c/0x58 [hns_roce_hw_v2] [11246.482934] hns_roce_hw_v2_reset_notify+0xd8/0x210 [hns_roce_hw_v2] [11246.489261] hclge_notify_roce_client+0x84/0xe0 [hclge] [11246.494464] hclge_reset_rebuild+0x60/0x730 [hclge] [11246.499320] hclge_reset_service_task+0x400/0x5a0 [hclge] [11246.504695] hclge_service_task+0x54/0x698 [hclge] [11246.509464] process_one_work+0x15c/0x458 [11246.513454] worker_thread+0x144/0x520 [11246.517186] kthread+0xfc/0x128 [11246.520314] ret_from_fork+0x10/0x18 [11246.523873] ---[ end trace eb980723699c2585 ]--- [11246.528710] hns3 0000:bd:00.2: Func clear success after reset. [11246.528747] hns3 0000:bd:00.0: Func clear success after reset. [11246.907710] hns3 0000:bd:00.1 eth7: link up According to [1] and [2]: There seems to be no specific guidance about how to handling the forward progress guarantee of network device's WQ yet, and other network device's WQ seem to be marked with WQ_MEM_RECLAIM without a clear reason. So this patch removes the WQ_MEM_RECLAIM flag when allocating WQ to aviod the above warning. 1. https://www.spinics.net/lists/netdev/msg631646.html 2. https://www.spinics.net/lists/netdev/msg632097.html Fixes: 0ea68902256e ("net: hns3: allocate WQ with WQ_MEM_RECLAIM flag") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: ena: Make some functions staticYueHaibing
Fix sparse warnings: drivers/net/ethernet/amazon/ena/ena_netdev.c:460:6: warning: symbol 'ena_xdp_exchange_program_rx_in_range' was not declared. Should it be static? drivers/net/ethernet/amazon/ena/ena_netdev.c:481:6: warning: symbol 'ena_xdp_exchange_program' was not declared. Should it be static? drivers/net/ethernet/amazon/ena/ena_netdev.c:1555:5: warning: symbol 'ena_xdp_handle_buff' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30dpaa_eth: Make dpaa_a050385_wa staticYueHaibing
Fix sparse warning: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2065:5: warning: symbol 'dpaa_a050385_wa' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: stmmac: Add support for VLAN Rx filteringWong Vee Khee
Add support for VLAN ID-based filtering by the MAC controller for MAC drivers that support it. Only the 12-bit VID field is used. Signed-off-by: Chuah Kim Tatt <kim.tatt.chuah@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: ethernet: ti: fix spelling mistake "rundom" -> "random"Colin Ian King
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30Merge branch 'pm-qos'Rafael J. Wysocki
* pm-qos: (30 commits) PM: QoS: annotate data races in pm_qos_*_value() Documentation: power: fix pm_qos_interface.rst format warning PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE Documentation: PM: QoS: Update to reflect previous code changes PM: QoS: Update file information comments PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions sound: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*() drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*() x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*() cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request() PM: QoS: Add CPU latency QoS API wrappers PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h PM: QoS: Simplify definitions of CPU latency QoS trace events ...
2020-03-29net/mlx5e: add mlx5e_rep_indr_setup_ft_cb supportwenxu
Add mlx5e_rep_indr_setup_ft_cb to support indr block setup in FT mode. Both tc rules and flow table rules are of the same format, It can re-use tc parsing for that, and move the flow table rules to their steering domain(the specific chain_index), the indr block offload in FT also follow this scenario. Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-29net/mlx5e: refactor indr setup blockwenxu
Refactor indr setup block for support ft indr setup in the next patch. The function mlx5e_rep_indr_offload exposes 'flags' in order set additional flag for FT in next patch. Rename mlx5e_rep_indr_setup_tc_block to mlx5e_rep_indr_setup_block and add flow_setup_cb_t callback parameters in order set the specific callback for FT in next patch. Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-29net/mlx5: E-Switch: Move eswitch chains to a new directorySaeed Mahameed
eswitch_offloads_chains.{c,h} were just introduced this kernel release cycle, eswitch is in high development demand right now and many features are planned to be added to it. eswitch deserves its own directory and here we move these new files to there, in preparation for upcoming eswitch features and new files. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-03-29net/mlx5: Use a separate work queue for fib event handlingMark Zhang
In VF lag mode when remove the bonding module without bring down the bond device first, we could potentially have circular dependency when we unload IB devices and also handle fib events: 1. The bond work starts first; 2. The "modprobe -rv bonding" process tries to release the bond device, with the "pernet_ops_rwsem" lock hold; 3. The bond work blocks in unregister_netdevice_notifier() and waits for the lock because fib event came right before; 4. The kernel fib module tries to free all the fib entries by broadcasting the "FIB_EVENT_NH_DEL" event; 5. Upon the fib event this lag_mp module holds the fib lock and queue a fib work. So: bond work -> modprobe task -> kernel fib module -> lag_mp -> bond work Today we either reload IB devices in roce lag in nic mode or either handle fib events in switchdev mode, but a new feature could change that we'll need to reload IB devices also in switchdev mode so this is a future proof fix as one may not notice this later. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-29Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: mlx5: Remove uninitialized use of key in mlx5_core_create_mkey {IB,net}/mlx5: Move asynchronous mkey creation to mlx5_ib {IB,net}/mlx5: Assign mkey variant in mlx5_ib only {IB,net}/mlx5: Setup mkey variant before mr create command invocation Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-29mlx4: fix "initializer element not constant" compiler errorJacob Keller
A recent commit e8937681797c ("devlink: prepare to support region operations") used the region_cr_space_str and region_fw_health_str variables as initializers for the devlink_region_ops structures. This can result in compiler errors: drivers/net/ethernet/mellanox//mlx4/crdump.c:45:10: error: initializer element is not constant .name = region_cr_space_str, ^ drivers/net/ethernet/mellanox//mlx4/crdump.c:45:10: note: (near initialization for ‘region_cr_space_ops.name’) drivers/net/ethernet/mellanox//mlx4/crdump.c:50:10: error: initializer element is not constant .name = region_fw_health_str, The variables were made to be "const char * const", indicating that both the pointer and data were constant. This was enough to resolve this on recent GCC (gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1) for this author). Unfortunately this is not enough for older compilers to realize that the variable can be treated as a constant expression. Fix this by introducing macros for the string and use those instead of the variable name in the region ops structures. Reported-by: tanhuazhong <tanhuazhong@huawei.com> Fixes: e8937681797c ("devlink: prepare to support region operations") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29qed: Fix race condition between scheduling and destroying the slowpath workqueueYuval Basson
Calling queue_delayed_work concurrently with destroy_workqueue might race to an unexpected outcome - scheduled task after wq is destroyed or other resources (like ptt_pool) are freed (yields NULL pointer dereference). cancel_delayed_work prevents the race by cancelling the timer triggered for scheduling a new task. Fixes: 59ccf86fe ("qed: Add driver infrastucture for handling mfw requests") Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Yuval Basson <ybason@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor comment conflict in mac80211. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28PCI/AER: Rationalize error status register clearingKuppuswamy Sathyanarayanan
The AER interfaces to clear error status registers were a confusing mess: - pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors from the Uncorrectable Error Status register. - pci_aer_clear_fatal_status() cleared fatal errors from the Uncorrectable Error Status register. - pci_cleanup_aer_error_status_regs() cleared the Root Error Status register (for Root Ports), the Uncorrectable Error Status register, and the Correctable Error Status register. Rename them to make them consistent: From To ---------------------------------------- ------------------------------- pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status() pci_aer_clear_fatal_status() pci_aer_clear_fatal_status() pci_cleanup_aer_error_status_regs() pci_aer_clear_status() Since pci_cleanup_aer_error_status_regs() (renamed to pci_aer_clear_status()) is only used within drivers/pci/, move the declaration from <linux/aer.h> to drivers/pci/pci.h. [bhelgaas: commit log, add renames] Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-27net: dsa: felix: support changing the MTUVladimir Oltean
Changing the MTU for this switch means altering the DEV_GMII:MAC_CFG_STATUS:MAC_MAXLEN_CFG field MAX_LEN, which in turn limits the size of frames that can be received. Special accounting needs to be done for the DSA CPU port (NPI port in hardware terms). The NPI port configuration needs to be held inside the private ocelot structure, since it is now accessed from multiple places. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27bgmac: configure MTU and add support for frames beyond 8192 byte sizeMurali Krishna Policharla
Change DMA descriptor length to handle jumbo frames beyond 8192 bytes. Also update jumbo frame max size to include FCS, the DMA packet length received includes FCS. Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Reviewed-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27r8169: fix PHY driver check on platforms w/o module softdepsHeiner Kallweit
On Android/x86 the module loading infrastructure can't deal with softdeps. Therefore the check for presence of the Realtek PHY driver module fails. mdiobus_register() will try to load the PHY driver module, therefore move the check to after this call and explicitly check that a dedicated PHY driver is bound to the PHY device. Fixes: f32593773549 ("r8169: check that Realtek PHY driver module is loaded") Reported-by: Chih-Wei Huang <cwhuang@android-x86.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27bnxt_en: Fix "fw.mgmt" and "fw.nsci" info via devlink info_get cbVasundhara Volam
Fix macro names to report fw.mgmt and fw.ncsi versions to match the devlink documentation. Example display after fixes: $ devlink dev info pci/0000:af:00.0 pci/0000:af:00.0: driver bnxt_en serial_number B0-26-28-FF-FE-25-84-20 versions: fixed: board.id BCM957454A4540 asic.id C454 asic.rev 1 running: fw 216.1.154.0 fw.psid 0.0.0 fw.mgmt 216.1.146.0 fw.mgmt.api 1.10.1 fw.ncsi 864.0.44.0 fw.roce 216.1.16.0 Fixes: 9599e036b161 ("bnxt_en: Add support for devlink info command") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27bnxt_en: Add partno to devlink info_get cbVasundhara Volam
Add part number info from the vital product data to info_get command via devlink tool. Update bnxt.rst documentation as well. Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27bnxt_en: Read partno and serialno of the board from VPDVasundhara Volam
Store the part number and serial number information from VPD in the bnxt structure. Follow up patch will add the support to display the information via devlink command. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27bnxt_en: Add fw.mgmt.api version to devlink info_get cb.Vasundhara Volam
Display the minimum version of firmware interface spec supported between driver and firmware. Also update bnxt.rst documentation file. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27mlxsw: spectrum_router: Avoid uninitialized symbol errorsIdo Schimmel
Suppress the following smatch errors. None of these are actually possible with current code paths. drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1220 mlxsw_sp_ipip_entry_find_decap() error: uninitialized symbol 'saddrp'. drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1220 mlxsw_sp_ipip_entry_find_decap() error: uninitialized symbol 'saddr_len'. drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1221 mlxsw_sp_ipip_entry_find_decap() error: uninitialized symbol 'saddr_prefix_len'. drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:1390 mlxsw_sp_netdevice_ipip_ol_reg_event() error: uninitialized symbol 'ipipt'. drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3255 mlxsw_sp_nexthop_group_update() error: uninitialized symbol 'err'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27mlxsw: switchx2: Remove unnecessary conversion to boolIdo Schimmel
Suppress following warning from coccinelle: drivers/net/ethernet/mellanox/mlxsw//switchx2.c:183:63-68: WARNING: conversion to bool not needed here Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27mlxsw: core_acl: Avoid defining static variable in header fileIdo Schimmel
The static array 'mlxsw_afk_element_infos' in 'core_acl_flex_keys.h' is copied to each file that includes the header, but not all use it. This results in the following warnings when compiling with W=1: drivers/net/ethernet/mellanox/mlxsw//core_acl_flex_keys.h:76:44: warning: ‘mlxsw_afk_element_infos’ defined but not used [-Wunused-const-variable=] One way to suppress the warning is to mark the array with '__maybe_unused', but another option is to remove it from the header file entirely. Change 'struct mlxsw_afk_element_inst' to store the key to the array ('element') instead of the array value keyed by 'element'. Adjust the different users accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27mlxsw: spectrum: Remove unused RIF and FID familiesIdo Schimmel
In merge commit 50853808ff4a ("Merge branch 'mlxsw-Prepare-for-VLAN-aware-bridge-w-VxLAN'") I flipped mlxsw to use emulated 802.1Q FIDs and correspondingly emulated VLAN RIFs. This means that the non-emulated variants are no longer used. Remove them and suppress the following warnings when compiling with W=1: drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:7572:38: warning: ‘mlxsw_sp_rif_vlan_ops’ defined but not used [-Wunused-const-variable=] drivers/net/ethernet/mellanox/mlxsw//spectrum_fid.c:584:41: warning: ‘mlxsw_sp_fid_8021q_family’ defined but not used [-Wunused-const-variable=] Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27mlxsw: spectrum_router: Add proper function documentationIdo Schimmel
Suppress following warnings when compiling with W=1: drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1552: warning: Function parameter or member 'mlxsw_sp' not described in '__mlxsw_sp_ipip_entry_update_tunnel' drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1552: warning: Function parameter or member 'ipip_entry' not described in '__mlxsw_sp_ipip_entry_update_tunnel' drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1552: warning: Function parameter or member 'extack' not described in '__mlxsw_sp_ipip_entry_update_tunnel' Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27mlxsw: i2c: Add missing field documentationIdo Schimmel
Suppress following warning when compiling with W=1: drivers/net/ethernet/mellanox/mlxsw//i2c.c:78: warning: Function parameter or member 'cmd' not described in 'mlxsw_i2c' Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27Merge branch 'mlx5_tx_steering' into rdma.git for-nextJason Gunthorpe
Leon Romanovsky says: ==================== Those two patches from Michael extends mlx5_core and mlx5_ib flow steering to support RDMA TX in similar way to already supported RDMA RX. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Due to dependencies * branch 'mlx5_tx_steering': RDMA/mlx5: Add support for RDMA TX flow table net/mlx5: Add support for RDMA TX steering
2020-03-27net/mlx5: Add support for RDMA TX steeringMichael Guralnik
Add new RDMA TX flow steering namespace. Flow steering rules in this namespace are used to filter transmitted RDMA traffic. Link: https://lore.kernel.org/r/20200324061425.1570190-2-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26net: ks8851-ml: Fix IO operations, againMarek Vasut
This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it turns out these were only necessary due to buggy hardware. This patch adds a check for such a buggy hardware to prevent any such mistakes again. While working further on the KS8851 driver, it came to light that the KS8851-16MLL is capable of switching bus endianness by a hardware strap, EESK pin. If this strap is incorrect, the IO accesses require such endian swapping as is being reverted by this patch. Such swapping also impacts the performance significantly. Hence, in addition to removing it, detect that the hardware is broken, report to user, and fail to bind with such hardware. Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access") Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: add XPN handlingMark Starovoytov
This patch adds XPN handling. Our driver doesn't support XPN, but we should still update a couple of places in the code, because the size of 'next_pn' field has changed. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec offload statistics implementationDmitry Bogdanov
This patch adds support for MACSec statistics on Atlantic network cards. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec offload statistics HW bindingsDmitry Bogdanov
This patch adds the Atlantic HW-specific bindings for MACSec statistics, e.g. register addresses / structs, helper function, etc, which will be used by actual callback implementations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec ingress offload implementationMark Starovoytov
This patch adds support for MACSec ingress HW offloading on Atlantic network cards. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec ingress offload HW bindingsMark Starovoytov
This patch adds the Atlantic HW-specific bindings for MACSec ingress, e.g. register addresses / structs, helper function, etc, which will be used by actual callback implementations. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec egress offload implementationDmitry Bogdanov
This patch adds support for MACSec egress HW offloading on Atlantic network cards. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec egress offload HW bindingsDmitry Bogdanov
This patch adds the Atlantic HW-specific bindings for MACSec egress, e.g. register addresses / structs, helper function, etc, which will be used by actual callback implementations. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: atlantic: MACSec offload skeletonDmitry Bogdanov
This patch adds basic functionality for MACSec offloading for Atlantic NICs. MACSec offloading functionality is enabled if network card has appropriate FW that has MACSec offloading enabled in config. Actual functionality (ingress, egress, etc) will be added in follow-up patches. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driverGrygorii Strashko
The TI AM65x/J721E SoCs Gigabit Ethernet Switch subsystem (CPSW2G NUSS) has two ports - One Ethernet port (port 1) with selectable RGMII and RMII interfaces and an internal Communications Port Programming Interface (CPPI) port (Host port 0) and with ALE in between. It also contains - Management Data Input/Output (MDIO) interface for physical layer device (PHY) management; - Updated Address Lookup Engine (ALE) module; - (TBD) New version of Common platform time sync (CPTS) module. On the TI am65x/J721E SoCs CPSW NUSS Ethernet subsystem into device MCU domain named MCU_CPSW0. Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels and one RX channels operating by TI am654 NAVSS Unified DMA Peripheral Root Complex (UDMA-P) controller. Introduced driver provides standard Linux net_device to user space and supports: - ifconfig up/down - MAC address configuration - ethtool operation: --driver --change --register-dump --negotiate phy --statistics --set-eee phy --show-ring --show-channels --set-channels - net_device ioctl mii-control - promisc mode - rx checksum offload for non-fragmented IPv4/IPv6 TCP/UDP packets. The CPSW NUSS can verify IPv4/IPv6 TCP/UDP packets checksum and fills csum information for each packet in psdata[2] word: - BIT(16) CHECKSUM_ERROR - indicates csum error - BIT(17) FRAGMENT - indicates fragmented packet - BIT(18) TCP_UDP_N - Indicates TCP packet was detected - BIT(19) IPV6_VALID, BIT(20) IPV4_VALID - indicates IPv6/IPv4 packet - BIT(15, 0) CHECKSUM_ADD - This is the value that was summed during the checksum computation. This value is FFFFh for non fragmented IPV4/6 UDP/TCP packets with no checksum error. RX csum offload can be disabled: ethtool -K <dev> rx-checksum on|off - tx checksum offload support for IPv4/IPv6 TCP/UDP packets (J721E only). TX csum HW offload can be enabled/disabled: ethtool -K <dev> tx-checksum-ip-generic on|off - multiq and switch between round robin/prio modes for cppi tx queues by using Netdev private flag "p0-rx-ptype-rrobin" to switch between Round Robin and Fixed priority modes: # ethtool --show-priv-flags eth0 Private flags for eth0: p0-rx-ptype-rrobin: on # ethtool --set-priv-flags eth0 p0-rx-ptype-rrobin off Number of TX DMA channels can be changed using "ethtool -L eth0 tx <N>". - GRO support: the napi_gro_receive() and napi_complete_done() are used. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: ethernet: ti: ale: am65: add support for default thread cfgGrygorii Strashko
Add support for default thread configuration for AM65x CPSW NUSS ALE to allow route all ingress packets to one default RX UDMA flow. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: ethernet: ti: ale: add support for mac-only modeGrygorii Strashko
The new CPSW ALE version, available on TI K3 AM654/J721E SoCs family, allows to switch any external port to MAC only mode. When MAC only mode enabled this port be treated like a MAC port for the host. All traffic received is only sent to the host. The host must direct traffic to this port as the lookup engine will not send traffic to the ports with the p0_maconly bit set and the p0_no_learn also set. If p0_maconly bit is set and the p0_no_learn is not set, the host can send non-directed packets that can be sent to the destination of a MacOnly port. It is also possible that The host can broadcast to all ports including MacOnly ports in this mode. This patch add ALE supprt for MAC only mode. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and ↵Grygorii Strashko
allmulti disabled On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS the unregistered multicast packets are still can be received with promisc and allmulti disabled. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. ALE VLAN entry:UNREG_MCAST_FLOOD_INDEX -> ALE_VLAN_MASK_MUXx ALE VLAN entry:REG_MCAST_FLOOD_INDEX -> ALE_VLAN_MASK_MUXy The commit b361da837392 ("net: netcp: ale: add proper ale entry mask bits for netcp switch ALE") update ALE code to support such ALE entries, it is always used ALE_VLAN_MASK_MUX0_REG index in ALE VLAN entry for unreg mcast packets mask configuration, which is read-only, at least for AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS. As result unreg mcast packets are allowed always. Hence, update ALE code to use ALE_VLAN_MASK_MUX1_REG index for ALE VLAN entries to configure unreg mcast port mask. Fixes: b361da837392 ("net: netcp: ale: add proper ale entry mask bits for netcp switch ALE") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phyGrygorii Strashko
The phy-gmii-sel can be only auto selected in Kconfig and now the pretty complex Kconfig dependencies are defined for phy-gmii-sel driver, which also need to be updated every time phy-gmii-sel is re-used for any new networking driver. Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all dependencies and from networking drivers and rely on using 'imply PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26ice: add a devlink region for dumping NVM contentsJacob Keller
Add a devlink region for exposing the device's Non Volatime Memory flash contents. Support the recently added .snapshot operation, enabling userspace to request a snapshot of the NVM contents via DEVLINK_CMD_REGION_NEW. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: track snapshot id usage count using an xarrayJacob Keller
Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-26devlink: report error once U32_MAX snapshot ids have been usedJacob Keller
The devlink_snapshot_id_get() function returns a snapshot id. The snapshot id is a u32, so there is no way to indicate an error code. A future change is going to possibly add additional cases where this function could fail. Refactor the function to return the snapshot id in an argument, so that it can return zero or an error value. This ensures that snapshot ids cannot be confused with error values, and aids in the future refactor of snapshot id allocation management. Because there is no current way to release previously used snapshot ids, add a simple check ensuring that an error is reported in case the snapshot_id would over flow. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 08:27:26 +0000