| Age | Commit message (Collapse) | Author |
|---|
|
For packets scheduled to RPM and LBK, NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
selects the TL3 or TL2 scheduling level as the one used for link/channel
selection and backpressure. For each scheduling queue at the selected
level: Setting NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG[ENA] = 1 allows
the TL3/TL2 queue to schedule packets to a specified RPM or LBK link
and channel.
There is an issue in the code where NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
is set to TL3 where as the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG is
configured for TL2 queue in some cases. As a result packets will not
transmit on that link/channel. This patch fixes the issue by configuring
the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG register depending on the
NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] value.
Fixes: caa2da34fd25a ("octeontx2-pf: Initialize and config queues")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20220802142813.25031-1-naveenm@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Given a field with its location/offset in input packet,
the key checking logic verifies whether extracting the
field can be supported or not based on the mkex profile
loaded in hardware. This logic is wrong wrt source mac
and this patch fixes that.
Fixes: 9b179a960a96 ("octeontx2-af: Generate key field bit mask from KEX profile")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The teardown sequence in FLR handler returns if no NIX LF
is attached to PF/VF because it indicates that graceful
shutdown of resources already happened. But there is a
chance of all allocated MCAM entries not being freed by
PF/VF. Hence free mcam entries even in case of detached LF.
Fixes: c554f9c1574e ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The packet parser profile supplied as firmware may not
be present all the time and default profile is used mostly.
Hence suppress firmware loading warning from kernel due to
absence of firmware in kernel image.
Fixes: 3a7244152f9c ("octeontx2-af: add support for custom KPU entries")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some
silicon revisions. Mistakenly this fixup was only applied to the default
MKEX profile while it should also be applied to any loaded profile.
Fixes: 1c1935c9945d ("octeontx2-af: Add NIX1 interfaces to NPC")
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_ethtool.h is included twice in bnxt_devlink.c,
remove one of them.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1817
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220804003722.54088-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"This cycle we got a new RDMA driver "ERDMA" for the Alibaba cloud
environment. Otherwise the changes are dominated by rxe fixes.
There is another RDMA driver on the list that might get merged next
cycle, 'MANA' for the Azure cloud environment.
Summary:
- Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5
- General spelling/grammer fixes
- rdma cm can follow changes in neighbours for control packets
- Significant amounts of rxe fixes and spec compliance changes
- Use the modern NAPI API
- Use the bitmap API instead of open coding
- Performance improvements for rtrs
- Add the ERDMA driver for Alibaba cloud
- Fix a use after free bug in SRP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/ib_srpt: Unify checking rdma_cm_id condition in srpt_cm_req_recv()
RDMA/rxe: Fix error unwind in rxe_create_qp()
RDMA/mlx5: Add missing check for return value in get namespace flow
RDMA/rxe: Split qp state for requester and completer
RDMA/rxe: Generate error completion for error requester QP state
RDMA/rxe: Update wqe_index for each wqe error completion
RDMA/srpt: Fix a use-after-free
RDMA/srpt: Introduce a reference count in struct srpt_device
RDMA/srpt: Duplicate port name members
IB/qib: Fix repeated "in" within comments
RDMA/erdma: Add driver to kernel build environment
RDMA/erdma: Add the ABI definitions
RDMA/erdma: Add the erdma module
RDMA/erdma: Add connection management (CM) support
RDMA/erdma: Add verbs implementation
RDMA/erdma: Add verbs header file
RDMA/erdma: Add event queue implementation
RDMA/erdma: Add cmdq implementation
RDMA/erdma: Add main include file
RDMA/erdma: Add the hardware related definitions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32
Pull AVR32 updates from Hans-Christian Noren Egtvedt:
"Mostly changes to documentation and comments"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
video:backlight: remove reference to AVR32 architecture in ltv350qv
video: remove support for non-existing atmel,at32ap-lcdc in atmel_lcdfb
usb:udc: remove reference to AVR32 architecture in Atmel USBA Kconfig
sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driver
net: remove cdns,at32ap7000-macb device tree entry
misc: update maintainer email address and description for atmel-ssc
mfd: remove reference to AVR32 architecture in atmel-smc.c
dma:dw: remove reference to AVR32 architecture in core.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
|
|
The port flag isn't set to `NFP_PORT_CHANGED` when using
`ethtool -m DEVNAME` before, so the port state (e.g. interface)
cannot be updated. Therefore, it caused that `ethtool -m DEVNAME`
sometimes cannot read the correct information.
E.g. `ethtool -m DEVNAME` cannot work when load driver before plug
in optical module, as the port interface is still NONE without port
update.
Now update the port state before sending info to NIC to ensure that
port interface is correct (latest state).
Fixes: 61f7c6f44870 ("nfp: implement ethtool get module EEPROM")
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The AVR32 architecture has been removed from the kernel in commit
26202873bb51fafdaa51be3e8de7aab9beb49f70, hence clean out the
cdns,at32ap7000-macb compatible entry in Cadence macb Ethernet driver.
AVR32 architecture never supported device tree, hence this code was not
used by anybody.
Updated documentation to match the default entry, no users of
cdns,at32ap7000-macb in the kernel tree.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
|
|
Conflicts:
net/ax25/af_ax25.c
d7c4c9e075f8c ("ax25: fix incorrect dev_tracker usage")
d62607c3fe459 ("net: rename reference+tracking helpers")
drivers/net/netdevsim/fib.c
180a6a3ee60a ("netdevsim: fib: Fix reference count leak on route deletion failure")
012ec02ae441 ("netdevsim: convert driver to use unlocked devlink API during init/fini")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Striding RQ uses MTT page mapping, where each page corresponds to an XSK
frame. MTT pages have alignment requirements, and XSK frames don't have
any alignment guarantees in the unaligned mode. Frames with improper
alignment must be discarded, otherwise the packet data will be written
at a wrong address.
Fixes: 282c0c798f8e ("net/mlx5e: Allow XSK frames smaller than a page")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20220729121356.3990867-1-maximmi@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fixes the coverity warning 'EVALUATION_ORDER' violation. port is written
twice with the same value.
Signed-off-by: Sebin Sebastian <mailmesebin00@gmail.com>
Link: https://lore.kernel.org/r/20220801040731.34741-1-mailmesebin00@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PTP messages like SYNC, FOLLOW_UP, DELAY_REQ are of size 58 bytes.
Using a minimum packet length as 64 makes NIX to pad 6 bytes of
zeroes while transmission. This is causing latest ptp4l application to
emit errors since length in PTP header and received packet are not same.
Padding upto 3 bytes is fine but more than that makes ptp4l to assume
the pad bytes as a TLV. Hence reduce the size to 60 from 64.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20220729092457.3850-1-naveenm@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A pci_enable_pcie_error_reporting() should be balanced by a corresponding
pci_disable_pcie_error_reporting() call in the error handling path, as
already done in the remove function.
Fixes: 3ce7547e5b71 ("net: txgbe: Add build support for txgbe")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/082003d00be1f05578c9c6434272ceb314609b8e.1659285240.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The prototype of input features of ionic_set_nic_features() is
netdev_features_t, but the vlan_flags is using the private
definition of ionic drivers. It should use the variable
ctx.cmd.lif_setattr.features, rather than features to check
the vlan flags. So fixes it.
Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vsi->current_netdev_flags is used store the current net device
flags, not the active netdevice features. So it should use
vsi->netdev->featurs, rather than vsi->current_netdev_flags
to check NETIF_F_HW_VLAN_CTAG_FILTER.
Fixes: 1babaf77f49d ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently nfp driver will reject to offload tunnel key action without
tunnel key ID which means tunnel ID is 0. But it is a normal case for tc
flower since user can setup a tunnel with tunnel ID is 0.
So we need to support this case to accept tunnel key action without
tunnel key ID.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220729091641.354748-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2022-07-28
Jacob Keller says:
Convert all of the Intel drivers with PTP support to the newer .adjfine
implementation which uses scaled parts per million.
This improves the precision of the frequency adjustments by taking advantage
of the full scaled parts per million input coming from user space.
In addition, all implementations are converted to using the
mul_u64_u64_div_u64 function which better handles the intermediate value.
This function supports architecture specific instructions where possible to
avoid loss of precision if the normal 64-bit multiplication would overflow.
Of note, the i40e implementation is now able to avoid loss of precision on
slower link speeds by taking advantage of this to multiply by the link speed
factor first. This results in a significantly more precise adjustment by
allowing the calculation to impact the lower bits.
This also gets us a step closer to being able to remove the .adjfreq
entirely by removing its use from many drivers.
I plan to follow this up with a series to update the drivers from other
vendors and drop the .adjfreq implementation entirely.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igb: convert .adjfreq to .adjfine
ixgbe: convert .adjfreq to .adjfine
i40e: convert .adjfreq to .adjfine
i40e: use mul_u64_u64_div_u64 for PTP frequency calculation
e1000e: convert .adjfreq to .adjfine
e1000e: remove unnecessary range check in e1000e_phc_adjfreq
ice: implement adjfine with mul_u64_u64_div_u64
====================
Link: https://lore.kernel.org/r/20220728181836.3387862-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By now all the functions fun_xdp_tx() calls are shared with the skb path
and thus are fragment-capable. Update fun_xdp_tx(), that up to now has
been passing just one buffer, to check for fragments and call
accordingly. This makes XDP_TX and ndo_xdp_xmit fragment-capable.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of passing an skb to the mapping function pass an
skb_shared_info plus an additional address/length pair. This makes it
usable for both skbs and XDP. Call it from the XDP path and adjust the
skb path.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract the Tx gather list writing code that skbs use into a utility
function and use it also for XDP.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current XDP unmapping is a subset of its skb analog, dealing with
only one buffer. In preparation for multi-frag XDP rename the skb
function and use it also for XDP. The XDP version is removed.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert reload command to behave the same way as the rest of the
commands and let if be called with devlink->lock held. Remove the
temporary devl_lock taking from drivers. As the DEVLINK_NL_FLAG_NO_LOCK
flag is no longer used, remove it alongside.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-29
This series contains updates to iavf driver only.
Przemyslaw prevents setting of TC max rate below minimum supported values
and reports updated queue values when setting up TCs.
---
v2: Dropped patch 3 (hw-tc-offload check)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-07-28
Misc updates to mlx5 driver:
1) Gal corrects to use skb_tcp_all_headers on encapsulated skbs.
2) Roi Adds the support for offloading standalone police actions.
3) lama, did some refactoring to minimize code coupling with
mlx5e_priv "god object" in some of the follows, and converts some of the
objects to pointers to preserve on memory when these objects aren't needed.
This is part one of two parts series.
* tag 'mlx5-updates-2022-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Move mlx5e_init_l2_addr to en_main
net/mlx5e: Split en_fs ndo's and move to en_main
net/mlx5e: Separate mlx5e_set_rx_mode_work and move caller to en_main
net/mlx5e: Add mdev to flow_steering struct
net/mlx5e: Report flow steering errors with mdev err report API
net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer
net/mlx5e: Allocate VLAN and TC for featured profiles only
net/mlx5e: Make mlx5e_tc_table private
net/mlx5e: Convert mlx5e_tc_table member of mlx5e_flow_steering to pointer
net/mlx5e: TC, Support tc action api for police
net/mlx5e: TC, Separate get/update/replace meter functions
net/mlx5e: Add red and green counters for metering
net/mlx5e: TC, Allocate post meter ft per rule
net/mlx5: DR, Add support for flow metering ASO
net/mlx5e: Fix wrong use of skb_tcp_all_headers() with encapsulation
====================
Link: https://lore.kernel.org/r/20220728205728.143074-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-07-28
This series contains updates to ice driver only.
Michal allows for VF true promiscuous mode to be set for multiple VFs
and adds clearing of promiscuous filters when VF trust is removed.
Maciej refactors ice_set_features() to track/check changed features
instead of constantly checking against netdev features and adds support for
NETIF_F_LOOPBACK.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: allow toggling loopback mode via ndo_set_features callback
ice: compress branches in ice_set_features()
ice: Fix promiscuous mode not turning off
ice: Introduce enabling promiscuous mode on multiple VF's
====================
Link: https://lore.kernel.org/r/20220728195538.3391360-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's not truly a ring, but the maximum length of the list of queued RX
SKBs is analogous to an RX ring size, so use that API to configure it.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Representors do not want to be subject to the PF's Ethernet address
filters, since traffic from VFs will typically have a destination
either elsewhere on the link segment or on an overlay network.
So, create a dynamic m-port with promiscuous and all-multicast
filters, and set it as the egress port of representor default rules.
Since the m-port is an alias of the calling PF's own m-port, traffic
will still be delivered to the PF's RXQs, but it will be subject to
the VNRX filter rules installed on the dynamic m-port (specified by
the v-port ID field of the filter spec).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to be able to drop the efx->filter_sem in ef100_filter_table_up()
so that we can call functions that insert filters (and thus take that
rwsem for read), which means the efx->type->filter_table_probe method
needs to be responsible for taking the lock in the first place.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Default rules are low-priority switching rules which the hardware uses
in the absence of higher-priority rules. Each representor requires a
corresponding rule matching traffic from its representee VF and
delivering to the PF (where a check on INGRESS_MPORT in
__ef100_rx_packet() will direct it to the representor). No rule is
required in the reverse direction, because representor TX uses a TX
override descriptor to bypass the MAE and deliver directly to the VF.
Since inserting any rule into the MAE disables the firmware's own
default rules, also insert a pair of rules to connect the PF to the
physical network port and vice-versa.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the source m-port of a packet in __ef100_rx_packet() is a VF,
hand off the packet to the corresponding representor with
efx_ef100_rep_rx_packet().
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If not, for now drop them and warn. A subsequent patch will look up
the source m-port to try and find a representor to deliver them to.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Traffic delivered to the (MAE admin) PF could be from either the wire
or a VF. The INGRESS_MPORT field of the RX prefix distinguishes these;
base_mport is the value this field will have for traffic from the wire
(which should be delivered to the PF's netdevice, not a representor).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Representor RX uses a NAPI context driven by a 'fake interrupt': when
the parent PF receives a packet destined for the representor, it adds
it to an SKB list (efv->rx_list), and schedules NAPI if the 'fake
interrupt' is primed. The NAPI poll then pulls packets off this list
and feeds them to the stack with netif_receive_skb_list().
This scheme allows us to decouple representor RX from the parent PF's
RX fast-path.
This patch implements the 'top half', which builds an SKB, copies data
into it from the RX buffer (which can then be released), adds it to
the queue and fires the 'fake interrupt' if necessary.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds the 'bottom half' napi->poll routine for representor RX.
See the next patch (with the top half) for an explanation of the 'fake
interrupt' scheme used to drive this NAPI context.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement .ndo_get_stats64() method to read values out of struct
efx_rep_sw_stats.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "ret" variable needs to be initialized at the start.
Fixes: 52323ef75414 ("net: marvell: prestera: add phylink support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuKeBBuGtsmd7QdT@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix tc qdisc show dev <ethX> root displaying too many fq_codel qdiscs.
tc_modify_qdisc, which is caller of ndo_setup_tc, expects driver to call
netif_set_real_num_tx_queues, which prepares qdiscs.
Without this patch, fq_codel qdiscs would not be adjusted to number of
queues on VF.
e.g.:
tc qdisc show dev <ethX>
qdisc mq 0: root
qdisc fq_codel 0: parent :4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent :3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent :2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent :1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
tc qdisc add dev <ethX> root mqprio num_tc 2 map 1 0 0 0 0 0 0 0 queues 1@0 1@1 hw 1 mode channel shaper bw_rlimit max_rate 5000Mbit 150Mbit
tc qdisc show dev <ethX>
qdisc mqprio 8003: root tc 2 map 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
queues:(0:0) (1:1)
mode:channel
shaper:bw_rlimit max_rate:5Gbit 150Mbit
qdisc fq_codel 0: parent 8003:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent 8003:3 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent 8003:2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent 8003:1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
While after fix:
tc qdisc add dev <ethX> root mqprio num_tc 2 map 1 0 0 0 0 0 0 0 queues 1@0 1@1 hw 1 mode channel shaper bw_rlimit max_rate 5000Mbit 150Mbit
tc qdisc show dev <ethX> #should show 2, shows 4
qdisc mqprio 8004: root tc 2 map 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
queues:(0:0) (1:1)
mode:channel
shaper:bw_rlimit max_rate:5Gbit 150Mbit
qdisc fq_codel 0: parent 8004:2 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
qdisc fq_codel 0: parent 8004:1 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Co-developed-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Co-developed-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix max_rate option in TC, check for proper quanta boundaries.
Check for minimum value provided and if it fits expected 50Mbps
quanta.
Without this patch, iavf could send settings for max_rate limiting
that would be accepted from by PF even the max_rate option is less
than expected 50Mbps quanta. It results in no rate limiting
on traffic as rate limiting will be floored to 0.
Example:
tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \
2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \
max_rate 50Mbps 500Mbps 500Mbps
Should limit TC0 to circa 50 Mbps
tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \
2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \
max_rate 0Mbps 100Kbit 500Mbps
Should return error
Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Convert mtk_eth_soc driver to xdp_return_frame_bulk APIs.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the capability to map non-linear xdp frames in XDP_TX and
ndo_xdp_xmit callback.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preliminary patch to add xdp multi-frag support to mtk_eth_soc
driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'get_ts_info' callback is used for obtaining information about
time stamping and PTP hardware clock capabilities of a network device.
The existing function of Spectrum-1 is used to advertise the PHC
capabilities and the supported RX and TX filters. Implement a similar
function for Spectrum-2, expose that the supported 'rx_filters' are all
PTP event packets, as for these packets the driver fills the time stamp
from the CQE in the SKB.
In the future, mlxsw driver will be extended to support one-step PTP in
Spectrum-2 and newer ASICs. Then additional 'tx_types' will be supported.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The SIOCSHWTSTAMP ioctl configures HW timestamping on a given port. In
Spectrum-2 and above, each packet gets time stamp by default, but in
order to provide an accurate time stamp, software should configure to
update the correction field. In addition, the PTP traps are not enabled
by default, software should enable it per port or for all ports.
The switch behaves like a transparent clock between CPU port and each
front panel port. If ingress correction is set on a port for a given packet
type, then when such a packet is received via the port, the current time
stamp is subtracted from the correction field. If egress correction is set
on a port for a given packet type, then when such a packet is transmitted
via the port, the current time stamp is added to the correction field.
The result is that as the packet ingresses through a port with ingress
correction enabled, and egresses through a port with egress correction
enabled, the PTP correction field is updated to reflect the time that the
packet spent in the ASIC.
This can be used to update the correction field of trapped packets by
enabling ingress correction on a port where time stamping was enabled,
and egress correction on the CPU port. Similarly, for packets transmitted
from the host, ingress correction should be enabled on the CPU port, and
egress correction on a front-panel port.
However, since the correction fields will be updated for all PTP packets
crossing the CPU port, in order not to mangle the correction field, the
front panel port involved in the packet transfer must have the
corresponding correction enabled as well.
Therefore, when HW timestamping is enabled on at least one port, we have
to configure hardware to update the correction field and trap PTP event
packets on all ports.
Add reference count as part of 'struct mlxsw_sp_ptp_state', to maintain
how many ports use HW timestamping. Handle the correction field
configuration only when the first port enables time stamping and when the
last port disables time stamping. Store the configuration as part of
'struct mlxsw_sp_ptp_state', as it is global for all ports.
The SIOCGHWTSTAMP ioctl is a getter for the current configuration,
implement it and use the global configuration.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As opposed to Spectrum-1, in which time stamps arrive through a pair of
dedicated events into a queue and later are being matched to the
corresponding packets, in Spectrum-2 we are reading the time stamps
directly from the CQE. Software can get the time stamp in UTC format
using CQEv2.
Add a time stamp field to 'struct mlxsw_skb_cb'. In
mlxsw_pci_cqe_{rdq,sdq}_handle() extract the time stamp from the CQE into
the new time stamp field. Note that the time stamp in the CQE is
represented by 38 bits, which is a short representation of UTC time.
Software should create the full time stamp using the global UTC clock.
Read UTC clock from hardware only for PTP packets which were trapped to CPU
with PTP0 trap ID (event packets).
Use the time stamp from the SKB when packet is received or transmitted.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are
sent as control packets is not updated at egress port. To overcome this
limitation, PTP packets which require time stamp, should be sent as data
packets with the following details:
1. FID valid = 1
2. FID value above the maximum FID
3. rx_router_port = 1
>From Spectrum-4 and on, this limitation will be solved.
Extend the function which handles TX header, in case that the packet is
a PTP packet, add TX header with type=data and all the above mentioned
requirements. Add operation as part of 'struct mlxsw_sp_ptp_ops', to be
able to separate the handling of PTP packets between different ASICs. Use
the data packet solution only for Spectrum-2 and Spectrum-3. Therefore, add
a dedicated operation structure for Spectrum-4, as it will be same to
Spectrum-2 in PTP implementation, just will not have the limitation of
control packets.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement physical hardware clock operations. The main difference between
the existing operations of Spectrum-1 and the new operations of Spectrum-2
is the usage of UTC hardware clock instead of FRC.
Add support for init() and fini() functions for PTP clock in Spectrum-2.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Query UTC sec and nsec PCI offsets during the pci_init(), to be able to
read UTC time later.
Implement functions to read UTC seconds and nanoseconds from the offset
which was read as part of initialization.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
