| Age | Commit message (Collapse) | Author |
|---|
|
The full minimum version is 0.10.6-0. The six is now correctly defined as
patch and shifted appropriately. 0.10.6-0 is a preproduction version of
firmware which was released over a year and a half ago. All production
devices meet this requirement.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-2-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-07-08
The following pull-request contains common mlx5 updates
for your *net-next* tree.
v2: https://lore.kernel.org/1751574385-24672-1-git-send-email-tariqt@nvidia.com
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Check device memory pointer before usage
net/mlx5: fs, fix RDMA TRANSPORT init cleanup flow
net/mlx5: Add IFC bits for PCIe Congestion Event object
net/mlx5: Small refactor for general object capabilities
net/mlx5: fs, add multiple prios to RDMA TRANSPORT steering domain
====================
Link: https://patch.msgid.link/1752002102-11316-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert mlx5 to dedicated RXFH ops. This is a fairly shallow
conversion, TBH, most of the driver code stays as is, but we
let the core allocate the context ID for the driver.
mlx5e_rx_res_rss_get_rxfh() and friends are made void, since
core only calls the driver for context 0. The second call
is right after context creation so it must exist (tm).
Tested with drivers/net/hw/rss_ctx.py on MCX6.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250707184115.2285277-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ICE appears to have some odd form of rss_context use plumbed
in for .get_rxfh. The .set_rxfh side does not support creating
contexts, however, so this must be dead code. For at least a year
now (since commit 7964e7884643 ("net: ethtool: use the tracking
array for get_rxfh on custom RSS contexts")) we have not been
calling .get_rxfh with a non-zero rss_context. We just get
the info from the RSS XArray under dev->ethtool.
Remove what must be dead code in the driver, clear the support flags.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250707184115.2285277-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
otx2 only supports additional indirection tables (no separate keys
etc.) so the conversion to dedicated callbacks and core-allocated
context is mostly removing the code which stores the extra tables
in the driver. Core already stores the indirection tables for
additional contexts, and doesn't call .get for them.
One subtle change here is that we'll now start with the table
covering all queues, not directing all traffic to queue 0.
This is what core expects if the user doesn't pass the initial
indir table explicitly (there's a WARN_ON() in the core trying
to make sure driver authors don't forget to populate ctx to
defaults).
Drivers implementing .create_rxfh_context don't have to set
cap_rss_ctx_supported, so remove it.
Tested-by: Geetha Sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250707184115.2285277-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an error occurs after a successful airoha_hw_init() call,
airoha_ppe_deinit() needs to be called as already done in the remove
function.
Fixes: 00a7678310fe ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/1c940851b4fa3c3ed2a142910c821493a136f121.1746715755.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
documentation
Configure FIFO thresholds according to the MAC controller documentation
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702125716.2875169-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
improve TX performance.
Adjust the burst len configuration of the MAC controller
to improve TX performance.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702125716.2875169-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the driver uses phylib to operate PHY by default.
On some boards, the PHY device is separated from the MAC device.
As a result, the hibmcge driver cannot operate the PHY device.
In this patch, the driver determines whether a PHY is available
based on register configuration. If no PHY is available,
the driver will use fixed_phy to register fake phydev.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250702125716.2875169-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since its introduction in commit 2e910b95329c ("net: Add a function to
splice pages into an skbuff for MSG_SPLICE_PAGES"), skb_splice_from_iter()
never used the @gfp argument. Remove it and adapt callers.
No functional change intended.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250702-splice-drop-unused-v3-2-55f68b60d2b7@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check for the return value of rcar_gen4_ptp_alloc()
to prevent potential null pointer dereference.
Fixes: b0d3969d2b4d ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20250703100109.2541018-1-haoxiang_li2024@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the newly added of_reserved_mem_region_to_resource{_byname}()
functions to handle "memory-region" properties.
The error handling is a bit different for mtk_wed_mcu_load_firmware().
A failed match of the "memory-region-names" would skip the entry, but
then other errors in the lookup and retrieval of the address would not
skip the entry. However, that distinction is not really important.
Either the region is available and usable or it is not. So now, errors
from of_reserved_mem_region_to_resource() are ignored so the region is
simply skipped.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250703183459.2074381-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/5zsbhtyox3cvbntuvhigsn42uooescbvdhrat6s3d6rczznzg5@tarta.nabijaczleweli.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in a NL_SET_ERR_MSG_MOD message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250703102219.1248399-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add HW Steering (HWS) as a secondary option for device steering mode. If
the device does not support SW Steering (SWS), HW Steering will be used
as the default, provided it is supported. FW Steering will now be
selected as the default only if both HWS and SWS are unavailable.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matcher size is dynamic: it starts at initial size, and then it grows
through rehash as more and more rules are added to this matcher.
When rules are deleted, matcher's size is not decreased. Rehash
approach is greedy. The idea is: if the matcher got to a certain size
at some point, chances are - it will get to this size again, so it is
better to avoid costly rehash operations whenever possible.
However, when all the rules of the matcher are deleted, this should
be viewed as special case. If the matcher actually got to the point
where it has zero rules, it might be an indication that some usecase
from the past is no longer happening. This is where some ICM can be
freed.
This patch handles this case: when a number of rules in a matcher
goes down to zero, the matcher's tables are shrunk to the initial
size.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As a preparation for the following patch that will add support
for shrinking empty matchers, rearrange the code to prevent
forward declaration of functions.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Track and grow matcher sizes individually for RX and TX RTCs. This
allows RX-only or TX-only use cases to effectively halve the device
resources they use.
For testing we used a simple module that inserts 1M RX-only rules and
measured the number of pages the device requests, and memory usage as
reported by `free -h`.
Pages Memory
Before this patch: 300k 1.5GiB
After this patch: 160k 900MiB
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kernel HWS only uses FDB tables and, as such, creates two lower level
containers (RTCs) for each matcher: one for RX and one for TX. Allow
these RTCs to differ in size by converting the size part of the matcher
attribute to a two element array.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250703185431.445571-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matchers were using the pool abstraction solely as a convenience
to allocate two STE ranges. The pool's core functionality, that
of allocating individual items from the range, was unused.
Matchers rely either on the hardware to hash rules into a table,
or on a user-provided index.
Remove the STE pool from the matcher and allocate the STE ranges
manually instead.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250703185431.445571-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reduce nesting by adding a couple of early return statements.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bwc layer will use `mlx5hws_rule_skip` to keep track of numbers of
RX and TX rules individually, so export this function for future usage.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250703185431.445571-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Removing incorrect comment section that is probably some
copy-paste artifact.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250703185431.445571-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`flow_source` is not used anywhere in mlx5hws_action_create_dest_array.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250703185431.445571-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-07-03
Vladimir Oltean converts Intel drivers (ice, igc, igb, ixgbe, i40e) to
utilize new timestamping API (ndo_hwtstamp_get() and ndo_hwtstamp_set()).
For ixgbe:
Paul, Don, Slawomir, and Radoslaw add Malicious Driver Detection (MDD)
support for X550 and E610 devices to detect, report, and handle
potentially malicious VFs.
Simon Horman corrects spelling mistakes.
For igbvf:
Kohei Enju removes a couple of unreported counters and adds reporting
of Tx timeouts.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igbvf: add tx_timeout_count to ethtool statistics
igbvf: remove unused interrupt counter fields from struct igbvf_adapter
ixgbe: spelling corrections
ixgbe: turn off MDD while modifying SRRCTL
ixgbe: add Tx hang detection unhandled MDD
ixgbe: check for MDD events
ixgbe: add MDD support
i40e: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
ixgbe: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
igb: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
igc: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
ice: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
====================
Link: https://patch.msgid.link/20250703174242.3829277-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a network device with netdev features enabled.
Some features are enabled based on the capabilities
advertised by the firmware. Add the skeleton of minimal
netdev operations. Additionally, initialize the parameters
for rings (TX/RX/Completion).
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-11-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Query resources from the firmware and, based on the
availability of resources, initialize the default
settings. The default settings include:
1. Rings and other resource reservations with the
firmware. This ensures that resources are reserved
before network and auxiliary devices are created.
2. Mapping the BAR, which helps access doorbells since
its size is known after querying the firmware.
3. Retrieving the TCs and hardware CoS queue mappings.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-10-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add irq allocation functions. This will help
to allocate IRQs to both netdev and RoCE aux devices.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-9-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Get the resources and capabilities from the firmware.
Add functions to manage the resources with the firmware.
These functions will help netdev reserve the resources
with the firmware before registering the device in future
patches. The resources and their information, such as
the maximum available and reserved, are part of the members
present in the bnge_hw_resc struct.
The bnge_reserve_rings() function also populates
the RSS table entries once the RX rings are reserved with
the firmware.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-8-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Backing store or context memory on the host helps the
device to manage rings, stats and other resources.
Context memory is allocated with the help of ring
alloc/free functions.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-7-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ring allocation/free mechanism which help
to allocate rings (TX/RX/Completion) and backing
stores memory on the host for the device.
Future patches will use these functions.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-6-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Query firmware with the help of basic firmware commands and
cache the capabilities. With the help of basic commands
start the initialization process of the driver with the
firmware.
Since basic information is available from the firmware,
register with devlink.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-5-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to communicate with the firmware.
Future patches will use these functions to send the
messages to the firmware.
Functions support allocating request/response buffers
to send a particular command. Each command has certain
timeout value to which the driver waits for response from
the firmware. In error case, commands may be either timed
out waiting on response from the firmware or may return
a specific error code.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-4-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allocate a base device and devlink interface with minimal
devlink ops.
Add dsn and board related information.
Map PCIe BAR (bar0), which helps to communicate with the
firmware.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-3-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add basic pci interface to the driver which supports
the BCM5770X NIC family.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250701143511.280702-2-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use a dedicated "mmio-sram" node and the generic allocator
instead of open-coding SRAM allocation for DMA rings.
Keep support for legacy device trees but notify the user via a
warning to update, and let the ethernet driver create the
gen_pool in this case.
Co-developed-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/c2b9242229d06af4e468204bcf42daa1535c3a72.1751461762.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix and add some missing field descriptions to kernel-doc comment of
struct mtk_eth.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/748e7de848e45ecdc84fbb78e34e9e13b9aa4329.1751461762.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use platform_get_irq_byname_optional() to avoid outputting error
messages when using legacy device trees which rely identifying
interrupts only by index. Instead, output a warning notifying the user
to update their device tree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/aeccd00eccb7186d39d2c16292019b3b22ec53b8.1751461762.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initialize u64 stats as it uses seq counter on 32bit machines
as suggested by lockdep below.
[ 1.830953][ T1] INFO: trying to register non-static key.
[ 1.830993][ T1] The code is fine but needs lockdep annotation, or maybe
[ 1.831027][ T1] you didn't initialize this object before use?
[ 1.831057][ T1] turning off the locking correctness validator.
[ 1.831090][ T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc2-v7l+ #1 PREEMPT
[ 1.831097][ T1] Tainted: [W]=WARN
[ 1.831099][ T1] Hardware name: BCM2711
[ 1.831101][ T1] Call trace:
[ 1.831104][ T1] unwind_backtrace from show_stack+0x18/0x1c
[ 1.831120][ T1] show_stack from dump_stack_lvl+0x8c/0xcc
[ 1.831129][ T1] dump_stack_lvl from register_lock_class+0x9e8/0x9fc
[ 1.831141][ T1] register_lock_class from __lock_acquire+0x420/0x22c0
[ 1.831154][ T1] __lock_acquire from lock_acquire+0x130/0x3f8
[ 1.831166][ T1] lock_acquire from bcmgenet_get_stats64+0x4a4/0x4c8
[ 1.831176][ T1] bcmgenet_get_stats64 from dev_get_stats+0x4c/0x408
[ 1.831184][ T1] dev_get_stats from rtnl_fill_stats+0x38/0x120
[ 1.831193][ T1] rtnl_fill_stats from rtnl_fill_ifinfo+0x7f8/0x1890
[ 1.831203][ T1] rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xd0/0x138
[ 1.831214][ T1] rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x48/0x8c
[ 1.831225][ T1] rtmsg_ifinfo from register_netdevice+0x8c0/0x95c
[ 1.831237][ T1] register_netdevice from register_netdev+0x28/0x40
[ 1.831247][ T1] register_netdev from bcmgenet_probe+0x690/0x6bc
[ 1.831255][ T1] bcmgenet_probe from platform_probe+0x64/0xbc
[ 1.831263][ T1] platform_probe from really_probe+0xd0/0x2d4
[ 1.831269][ T1] really_probe from __driver_probe_device+0x90/0x1a4
[ 1.831273][ T1] __driver_probe_device from driver_probe_device+0x38/0x11c
[ 1.831278][ T1] driver_probe_device from __driver_attach+0x9c/0x18c
[ 1.831282][ T1] __driver_attach from bus_for_each_dev+0x84/0xd4
[ 1.831291][ T1] bus_for_each_dev from bus_add_driver+0xd4/0x1f4
[ 1.831303][ T1] bus_add_driver from driver_register+0x88/0x120
[ 1.831312][ T1] driver_register from do_one_initcall+0x78/0x360
[ 1.831320][ T1] do_one_initcall from kernel_init_freeable+0x2bc/0x314
[ 1.831331][ T1] kernel_init_freeable from kernel_init+0x1c/0x144
[ 1.831339][ T1] kernel_init from ret_from_fork+0x14/0x20
[ 1.831344][ T1] Exception stack(0xf082dfb0 to 0xf082dff8)
[ 1.831349][ T1] dfa0: 00000000 00000000 00000000 00000000
[ 1.831353][ T1] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.831356][ T1] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
Fixes: 59aa6e3072aa ("net: bcmgenet: switch to use 64bit statistics")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702092417.46486-1-ryotkkr98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The open() and probe() functions of the mlxbf_gige driver
check for errors during initialization, but do not provide
details regarding the errors. The mlxbf_gige driver should
provide error details in the kernel log, noting what step
of initialization failed.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701180324.29683-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* mlx5-next:
net/mlx5: Check device memory pointer before usage
net/mlx5: fs, fix RDMA TRANSPORT init cleanup flow
net/mlx5: Add IFC bits for PCIe Congestion Event object
net/mlx5: Small refactor for general object capabilities
|
|
CONFIG_RFS_ACCEL
I received a kernel-test-bot report[1] that shows the
[-Wunused-but-set-variable] warning. Since the previous commit I made, as
the 'Fixes' tag shows, gives users an option to turn on and off the
CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with
GCC specifically.
Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer
bugs.
[1]
All warnings (new ones prefixed by >>):
drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq':
>> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable]
10703 | int i, j, rc = 0;
| ^
Fixes: 9b6a30febddf ("net: allow rps/rfs related configs to be switched")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc5).
No conflicts.
No adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add `tx_timeout_count` to ethtool statistics to provide visibility into
transmit timeout events, bringing igbvf in line with other Intel
ethernet drivers.
Currently `tx_timeout_count` is incremented in igbvf_watchdog_task() and
igbvf_tx_timeout() but is not exposed to userspace nor used elsewhere in
the driver.
Before:
# ethtool -S ens5 | grep tx
tx_packets: 43
tx_bytes: 4408
tx_restart_queue: 0
After:
# ethtool -S ens5 | grep tx
tx_packets: 41
tx_bytes: 4241
tx_restart_queue: 0
tx_timeout_count: 0
Tested-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove `int_counter0` and `int_counter1` from struct igbvf_adapter since
they are only incremented in interrupt handlers igbvf_intr_msix_rx() and
igbvf_msix_other(), but never read or used anywhere in the driver.
Note that igbvf_intr_msix_tx() does not have similar counter increments,
suggesting that these were likely overlooked during development.
Eliminate the fields and their unnecessary accesses in interrupt
handlers.
Tested-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Correct spelling as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Modifying SRRCTL register can generate MDD event.
Turn MDD off during SRRCTL register write to prevent generating MDD.
Fix RCT in ixgbe_set_rx_drop_en().
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add Tx Hang detection due to an unhandled MDD Event.
Previously, a malicious VF could disable the entire port causing
TX to hang on the E610 card.
Those events that caused PF to freeze were not detected
as an MDD event and usually required a Tx Hang watchdog timer
to catch the suspension, and perform a physical function reset.
Implement flows in the affected PF driver in such a way to check
the cause of the hang, detect it as an MDD event and log an
entry of the malicious VF that caused the Hang.
The PF blocks the malicious VF, if it continues to be the source
of several MDD events.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When an event is detected it is logged and, for the time being, the
queue is immediately re-enabled. This is due to the lack of an API
to the hypervisor so it could deal with it as it chooses.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add malicious driver detection to ixgbe driver. The supported devices
are E610 and X550.
Handling MDD events is enabled while VFs are created and turned off
when they are disabled. There is no runtime command to enable or
disable MDD independently.
MDD event is logged when malicious VF driver is detected. For example VF
can try to send incorrect Tx descriptor (TSO on, but length field not
correct). It can be reproduced by manipulating the driver, or using
driver with incorrect descriptor values.
Example log:
"Malicious event on VF 0 tx:128 rx:128"
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
