| Age | Commit message (Collapse) | Author |
|---|
|
Some source files state copyright dates that are earlier than the
last modification of the file. Change the copyright year to 2022 in
all such cases.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220930224549.3503434-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new function that returns a register descriptor given its
ID. Change ipa_reg_offset() and ipa_reg_n_offset() so they take a
register descriptor argument rather than an IPA pointer and register
ID. Have them accept null pointers (and return an invalid 0 offset),
to avoid the need for excessive error checking. (A warning is issued
whenever ipa_reg() returns 0).
Call ipa_reg() or ipa_reg_n() to look up information about the
register before calls to ipa_reg_offset() and ipa_reg_n_offset().
Delay looking up offsets until they're needed to read or write
registers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose two inline functions that return the offset for a register
whose ID is provided; one of them takes an additional argument
that's used for registers that are parameterized. These both use
a common helper function __ipa_reg_offset(), which just uses the
offset symbols already defined.
Replace all references to the offset macros defined for IPA
registers with calls to ipa_reg_offset() or ipa_reg_n_offset().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 12 seems upset that we check ipa_irq against array bound
but then proceed, anyway:
drivers/net/ipa/ipa_interrupt.c: In function ‘ipa_interrupt_add’:
drivers/net/ipa/ipa_interrupt.c:196:27: warning: array subscript 30 is above array bounds of ‘void (*[30])(struct ipa *, enum ipa_irq_id)’ [-Warray-bounds]
196 | interrupt->handler[ipa_irq] = handler;
| ~~~~~~~~~~~~~~~~~~^~~~~~~~~
drivers/net/ipa/ipa_interrupt.c:42:27: note: while referencing ‘handler’
42 | ipa_irq_handler_t handler[IPA_IRQ_COUNT];
| ^~~~~~~
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220519004417.2109886-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use runtime power management autosuspend.
Up until this point, we only suspended the IPA hardware for system
suspend; now we'll suspend it aggressively using runtime power
management, setting the initial autosuspend delay to half a second
of inactivity.
Replace pm_runtime_put() calls with pm_runtime_put_autosuspend(),
call pm_runtime_mark_last_busy() before each of those. In places
where we're shutting things down, or decrementing power references
for errors, use pm_runtime_put_noidle() instead.
Finally, remove ipa_runtime_idle(), so the ->runtime_suspend
callback will occur if idle.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only remaining user of the ipa_clock_{get,put}() interface is
ipa_isr_thread(). Replace calls to ipa_clock_get() there calling
pm_runtime_get_sync() instead. And call pm_runtime_put() there
rather than ipa_clock_put(). Warn if we ever get an error.
With that, we can get rid of ipa_clock_get() and ipa_clock_put().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We currently assume no errors occur when enabling or disabling the
IPA core clock and interconnects. And although this commit exposes
errors that could occur, we generally assume this won't happen in
practice.
This commit changes ipa_clock_get() and ipa_clock_put() so each
returns a value. The values returned are meant to mimic what the
runtime power management functions return, so we can set up error
handling here before we make the switch. Have ipa_clock_get()
increment the reference count even if it returns an error, to match
the behavior of pm_runtime_get().
More details follow.
When taking a reference in ipa_clock_get(), return 0 for the first
reference, 1 for subsequent references, or a negative error code if
an error occurs. Note that if ipa_clock_get() returns an error, we
must not touch hardware; in some cases such errors now cause entire
blocks of code to be skipped.
When dropping a reference in ipa_clock_put(), we return 0 or an
error code. The error would come from ipa_clock_disable(), which
now returns what ipa_interconnect_disable() returns (either 0 or a
negative error code). For now, callers ignore the return value;
if an error occurs, a message will have already been logged, and
little more can actually be done to improve the situation.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that ipa_isr_thread() is a simple wrapper that gets a clock
reference around ipa_interrupt_process_all(), get rid of the
called function and just open-code it in ipa_isr_thread().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The pending IPA interrupts are checked by ipa_isr_thread(), and
interrupts are processed only if an enabled interrupt has a
condition pending. But ipa_interrupt_process_all() now makes the
same check, so the one in ipa_isr_thread() can just be skipped.
Also in ipa_isr_thread(), any interrupt conditions pending which are
not enabled are cleared. Here too, ipa_interrupt_process_all() now
clears such excess interrupt conditions, so ipa_isr_thread() doesn't
have to.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We ignore any IPA interrupt that has no handler. If any interrupt
conditions without a handler exist when an IPA interrupt occurs,
clear those conditions. Add a debug message to report which ones
are being cleared.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the IPA interrupt handler runs, the IPA core clock must already
be operational, and the interconnect providing access by the AP to
IPA config space must be enabled too.
Currently we ensure this by taking a top-level "stay awake" IPA
clock reference, but that will soon go away. In preparation for
that, move all handling for the IPA IRQ into the thread function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialization of the IPA driver has several phases:
- "init" phase can be done without any access to IPA hardware
- "config" phase requires the IPA hardware to be clocked
- "setup" phase requires the GSI layer to be functional
Currently, initialization for the IPA interrupt handling code occurs
in the setup phase. It requires access to the IPA hardware but does
not need GSI, so it can be moved to the config phase instead.
Call the interrupt configuration function early in ipa_config()
rather than from ipa_setup(). Rename ipa_interrupt_setup() to be
ipa_interrupt_config(), and ipa_interrupt_teardown() to be
ipa_interupt_deconfig(), so their names properly indicate when
they get called.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I've added commented assertions to record certain properties that
can be assumed to hold in certain places in the IPA code. Convert
these into real WARN_ON() calls so the assertions are actually
checked, using the standard WARN_ON() mechanism.
Where errors can be returned, return an error if a warning is
triggered.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Starting with IPA v4.7, registers related to IPA interrupts are
located at a fixed offset 0x1000 above than the addresses used for
earlier versions. Define and use functions to provide the offset to
use for these registers based on IPA version.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename two suspend IRQ registers so they follow the IPA_REG_IRQ_xxx
naming convention used elsewhere.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we handle wakeup interrupts properly, arrange for the IPA
interrupt to be treated as a wakeup interrupt.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch incorporates three source files (and their headers). They're
grouped into one patch mainly for the purpose of making the number and
size of patches in this series somewhat reasonable.
- "ipa_clock.c" and "ipa_clock.h" implement clocking for the IPA device.
The IPA has a single core clock managed by the common clock framework.
In addition, the IPA has three buses whose bandwidth is managed by the
Linux interconnect framework. At this time the core clock and all
three buses are either on or off; we don't yet do any more fine-grained
management than that. The core clock and interconnects are enabled
and disabled as a unit, using a unified clock-like abstraction,
ipa_clock_get()/ipa_clock_put().
- "ipa_interrupt.c" and "ipa_interrupt.h" implement IPA interrupts.
There are two hardware IRQs used by the IPA driver (the other is
the GSI interrupt, described in a separate patch). Several types
of interrupt are handled by the IPA IRQ handler; these are not part
of data/fast path.
- The IPA has a region of local memory that is accessible by the AP
(and modem). Within that region are areas with certain defined
purposes. "ipa_mem.c" and "ipa_mem.h" define those regions, and
implement their initialization.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
