summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2021-05-13ath6kl: return error code in ath6kl_wmi_set_roam_lrssi_cmd()Anirudh Rayabharam
Propagate error code from failure of ath6kl_wmi_cmd_send() to the caller. Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Cc: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210503115736.2104747-44-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13Revert "ath6kl: return error code in ath6kl_wmi_set_roam_lrssi_cmd()"Greg Kroah-Hartman
This reverts commit fc6a6521556c8250e356ddc6a3f2391aa62dc976. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change. The change being reverted does NOTHING as the caller to this function does not even look at the return value of the call. So the "claim" that this fixed an an issue is not true. It will be fixed up properly in a future patch by propagating the error up the stack correctly. Cc: Kangjie Lu <kjlu@umn.edu> Cc: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210503115736.2104747-43-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-28Merge tag 'locking-core-2021-04-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - rtmutex cleanup & spring cleaning pass that removes ~400 lines of code - Futex simplifications & cleanups - Add debugging to the CSD code, to help track down a tenacious race (or hw problem) - Add lockdep_assert_not_held(), to allow code to require a lock to not be held, and propagate this into the ath10k driver - Misc LKMM documentation updates - Misc KCSAN updates: cleanups & documentation updates - Misc fixes and cleanups - Fix locktorture bugs with ww_mutexes * tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) kcsan: Fix printk format string static_call: Relax static_call_update() function argument type static_call: Fix unused variable warn w/o MODULE locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock() locking/rtmutex: Restrict the trylock WARN_ON() to debug locking/rtmutex: Fix misleading comment in rt_mutex_postunlock() locking/rtmutex: Consolidate the fast/slowpath invocation locking/rtmutex: Make text section and inlining consistent locking/rtmutex: Move debug functions as inlines into common header locking/rtmutex: Decrapify __rt_mutex_init() locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs locking/rtmutex: Inline chainwalk depth check locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c locking/rtmutex: Remove empty and unused debug stubs locking/rtmutex: Consolidate rt_mutex_init() locking/rtmutex: Remove output from deadlock detector locking/rtmutex: Remove rtmutex deadlock tester leftovers locking/rtmutex: Remove rt_mutex_timed_lock() MAINTAINERS: Add myself as futex reviewer locking/mutex: Remove repeated declaration ...
2021-04-26Merge tag 'irq-core-2021-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The usual updates from the irq departement: Core changes: - Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can be cleaned up which either use a seperate mechanism to prevent auto-enable at request time or have a racy mechanism which disables the interrupt right after request. - Get rid of the last usage of irq_create_identity_mapping() and remove the interface. - An overhaul of tasklet_disable(). Most usage sites of tasklet_disable() are in task context and usually in cleanup, teardown code pathes. tasklet_disable() spinwaits for a tasklet which is currently executed. That's not only a problem for PREEMPT_RT where this can lead to a live lock when the disabling task preempts the softirq thread. It's also problematic in context of virtualization when the vCPU which runs the tasklet is scheduled out and the disabling code has to spin wait until it's scheduled back in. There are a few code pathes which invoke tasklet_disable() from non-sleepable context. For these a new disable variant which still spinwaits is provided which allows to switch tasklet_disable() to a sleep wait mechanism. For the atomic use cases this does not solve the live lock issue on PREEMPT_RT. That is mitigated by blocking on the RT specific softirq lock. - The PREEMPT_RT specific implementation of softirq processing and local_bh_disable/enable(). On RT enabled kernels soft interrupt processing happens always in task context and all interrupt handlers, which are not explicitly marked to be invoked in hard interrupt context are forced into task context as well. This allows to protect against softirq processing with a per CPU lock, which in turn allows to make BH disabled regions preemptible. Most of the softirq handling code is still shared. The RT/non-RT specific differences are addressed with a set of inline functions which provide the context specific functionality. The local_bh_disable() / local_bh_enable() mechanism are obviously seperate. - The usual set of small improvements and cleanups Driver changes: - New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt controllers - Extended functionality for MStar, STM32 and SC7280 irq chips - Enhanced robustness for ARM GICv3/4.1 drivers - The usual set of cleanups and improvements all over the place" * tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP irqchip/gic-v3: Do not enable irqs when handling spurious interrups dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller irqchip: Add support for IDT 79rc3243x interrupt controller irqdomain: Drop references to recusive irqdomain setup irqdomain: Get rid of irq_create_strict_mappings() irqchip/jcore-aic: Kill use of irq_create_strict_mappings() ARM: PXA: Kill use of irq_create_strict_mappings() irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection irqchip/tb10x: Use 'fallthrough' to eliminate a warning genirq: Reduce irqdebug cacheline bouncing kernel: Initialize cpumask before parsing irqchip/wpcm450: Drop COMPILE_TEST irqchip/irq-mst: Support polarity configuration irqchip: Add driver for WPCM450 interrupt controller dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic dt-bindings: qcom,pdc: Add compatible for sc7280 irqchip/stm32: Add usart instances exti direct event support irqchip/gic-v3: Fix OF_BAD_ADDR error handling irqchip/sifive-plic: Mark two global variables __ro_after_init ...
2021-04-22ath11k: fix warning in ath11k_mhi_configAnilkumar Kolli
Initialize static variable ath11k_mhi_config for all hw_rev, return error for unknown hw_rev. This patch fixes below Smatch warning: drivers/net/wireless/ath/ath11k/mhi.c:357 ath11k_mhi_register() error: uninitialized symbol 'ath11k_mhi_config'. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 Fixes: a233811ef600 ("ath11k: Add qcn9074 mhi controller config") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1617857830-19315-1-git-send-email-akolli@codeaurora.org
2021-04-22ath11k: qmi: Fix spelling mistake "requeqst" -> "request"Colin Ian King
There is a spelling mistake in an ath11k_warn message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210316091924.15627-1-colin.king@canonical.com
2021-04-22ath10k: Fix ath10k_wmi_tlv_op_pull_peer_stats_info() unlock without lockShuah Khan
ath10k_wmi_tlv_op_pull_peer_stats_info() could try to unlock RCU lock winthout locking it first when peer reason doesn't match the valid cases for this function. Add a default case to return without unlocking. Fixes: 09078368d516 ("ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()") Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210406230228.31301-1-skhan@linuxfoundation.org
2021-04-22ath10k: Fix a use after free in ath10k_htc_send_bundleLv Yunlong
In ath10k_htc_send_bundle, the bundle_skb could be freed by dev_kfree_skb_any(bundle_skb). But the bundle_skb is used later by bundle_skb->len. As skb_len = bundle_skb->len, my patch replaces bundle_skb->len to skb_len after the bundle_skb was freed. Fixes: c8334512f3dd1 ("ath10k: add htt TX bundle for sdio") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210329120154.8963-1-lyl2019@mail.ustc.edu.cn
2021-04-22ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devicesToke Høiland-Jørgensen
When the error check in ath9k_hw_read_revisions() was added, it checked for -EIO which is what ath9k_regread() in the ath9k_htc driver uses. However, for plain ath9k, the register read function uses ioread32(), which just returns -1 on error. So if such a read fails, it still gets passed through and ends up as a weird mac revision in the log output. Fix this by changing ath9k_regread() to return -1 on error like ioread32() does, and fix the error check to look for that instead of -EIO. Fixes: 2f90c7e5d094 ("ath9k: Check for errors when reading SREV register") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210326180819.142480-1-toke@redhat.com
2021-04-20Merge tag 'mac80211-next-for-net-next-2021-04-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of updates, all over the map: * set sk_pacing_shift for 802.3->802.11 encap offload * some monitor support for 802.11->802.3 decap offload * HE (802.11ax) spec updates * userspace API for TDLS HE support * along with various other small features, cleanups and fixups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19wireless: align HE capabilities A-MPDU Length Exponent ExtensionJohannes Berg
The A-MPDU length exponent extension is defined differently in 802.11ax D6.1, align with that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.c2a257d3e2df.I3455245d388c52c61dace7e7958dbed7e807cfb6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19wireless: align some HE capabilities with the specJohannes Berg
Some names were changed, align that with the spec as of 802.11ax-D6.1. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.b1e5fbab0d8c.I3eb6076cb0714ec6aec6b8f9dee613ce4a05d825@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-18wil6210: wmi: Remove useless codeJiapeng Chong
Fix the following whitescan warning: An unsigned value can never be less than 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1617788766-91433-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-04-18carl9170: remove get_tid_hChristophe JAILLET
'get_tid_h()' is the same as 'ieee80211_get_tid()'. So this function can be removed to save a few lines of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/68efad7a597159e22771d37fc8b4a8a613866d60.1617399010.git.christophe.jaillet@wanadoo.fr
2021-04-13of: net: pass the dst buffer to of_get_mac_address()Michael Walle
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13Merge tag 'wireless-drivers-next-2021-04-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.13 First set of patches for v5.13. I have been offline for a couple of and I have a smaller pull request this time. The next one will be bigger. Nothing really special standing out. ath11k * add initial support for QCN9074, but not enabled yet due to firmware problems * enable radar detection for 160MHz secondary segment * handle beacon misses in station mode rtw88 * 8822c: support firmware crash dump mt7601u * enable TDLS support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29Merge tag 'v5.12-rc5' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-03-19Merge branch 'locking/urgent' into locking/core, to pick up dependent commitsIngo Molnar
We are applying further, lower-prio fixes on top of two ww_mutex fixes in locking/urgent. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-17ath9k: Use tasklet_disable_in_atomic()Sebastian Andrzej Siewior
All callers of ath9k_beacon_ensure_primary_slot() are preemptible / acquire a mutex except for this callchain: spin_lock_bh(&sc->sc_pcu_lock); ath_complete_reset() -> ath9k_calculate_summary_state() -> ath9k_beacon_ensure_primary_slot() It's unclear how that can be distangled, so use tasklet_disable_in_atomic() for now. This allows tasklet_disable() to become sleepable once the remaining atomic users are cleaned up. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210309084242.313899703@linutronix.de
2021-03-15Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.13. Major changes: ath11k * add initial support for QCN9074, but not enabled yet due to firmware problems * enable radar detection for 160MHz secondary segment * handle beacon misses in station mode
2021-03-09ath11k: Add support for STA to handle beacon missLavanya Suresh
When AP goes down without any indication to STA, firmware detects missing beacon, and sends wmi roam event with reason BEACON_MISS to the host. Added support for STA mode to trigger disassociation from AP, on receiving this event from firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01717-QCAHKSWPL_SILICONZ-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1614340859-28867-1-git-send-email-lavaks@codeaurora.org
2021-03-09ath11k: Update signal filled flag during sta_statistics drv opSriram R
Currently, though the peer rssi information is updated to station dump from driver sta_statistics mac op, the info doesn't get updated since the NL80211_STA_INFO_SIGNAL filled flag is not set in station info. Hence update this flag while filling the rssi info. Tested on: IPQ8074 WLAN.HK.2.1.0.1-01213-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210224090241.3098-1-srirrama@codeaurora.org
2021-03-09ath10k: skip the wait for completion to recovery in shutdown pathYoughandhar Chintala
Currently in the shutdown callback we wait for recovery to complete before freeing up the resources. This results in additional two seconds delay during the shutdown and thereby increase the shutdown time. As an attempt to take less time during shutdown, remove the wait for recovery completion in the shutdown callback and added an API to freeing the reosurces in which they were common for shutdown and removing the module. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210223142908.23374-1-youghand@codeaurora.org
2021-03-06ath10k: Detect conf_mutex held ath10k_drain_tx() callsShuah Khan
ath10k_drain_tx() must not be called with conf_mutex held as workers can use that also. Add call to lockdep_assert_not_held() on conf_mutex to detect if conf_mutex is held by the caller. The idea for this patch stemmed from coming across the comment block above the ath10k_drain_tx() while reviewing the conf_mutex holds during to debug the conf_mutex lock assert in ath10k_debug_fw_stats_request(). Adding detection to assert on conf_mutex hold will help detect incorrect usages that could lead to locking problems when async worker routines try to call this routine. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/linux-wireless/871rdmu9z9.fsf@codeaurora.org/
2021-02-24ath11k: fix thermal temperature readPradeep Kumar Chitrapu
Fix dangling pointer in thermal temperature event which causes incorrect temperature read. Tested-on: IPQ8074 AHB WLAN.HK.2.4.0.1-00041-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210218182708.8844-1-pradeepc@codeaurora.org
2021-02-24ath11k: fix potential wmi_mgmt_tx_queue race conditionMiaoqing Pan
There is a potential race condition between skb_queue_len() and skb_queue_tail(), the former may get old value before updated by the latter. So use skb_queue_len_lockless() instead. And also use '>=', in case we queue a few SKBs simultaneously. Found while discussing a similar fix for ath10k: https://patchwork.kernel.org/project/linux-wireless/patch/1608515579-1066-1-git-send-email-miaoqing@codeaurora.org/ No functional changes, compile tested only. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613630709-704-1-git-send-email-miaoqing@codeaurora.org
2021-02-24ath11k: qmi: cosmetic changes to error messagesKalle Valo
Change the error messages to follow the style used in ath11k. Also include error values in the messages which didn't have that. No functional changes, compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613569421-14177-2-git-send-email-kvalo@codeaurora.org
2021-02-24ath11k: qmi: add more debug messagesKalle Valo
To make it easier to follow the qmi event flow. No functional changes, compile tested only. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613569421-14177-1-git-send-email-kvalo@codeaurora.org
2021-02-24ath11k: fix AP mode for QCA6390Kalle Valo
Commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") completely broke AP mode on QCA6390: kernel: [ 151.230734] ath11k_pci 0000:06:00.0: failed to create peer after vdev start delay: -22 wpa_supplicant[2307]: Failed to set beacon parameters wpa_supplicant[2307]: Interface initialization failed wpa_supplicant[2307]: wlan0: interface state UNINITIALIZED->DISABLED wpa_supplicant[2307]: wlan0: AP-DISABLED wpa_supplicant[2307]: wlan0: Unable to setup interface. wpa_supplicant[2307]: Failed to initialize AP interface This was because commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") added error handling for ath11k_peer_create(), which had been failing all along but was unnoticed due to the missing error handling. The actual bug was introduced already in commit aa44b2f3ecd4 ("ath11k: start vdev if a bss peer is already created"). ath11k_peer_create() was failing because for AP mode the peer is created already earlier op_add_interface() and we should skip creation here, but the check for modes was wrong. Fixing that makes AP mode work again. This shouldn't affect IPQ8074 nor QCN9074 as they have hw_params.vdev_start_delay disabled. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Fixes: c134d1f8c436 ("ath11k: Handle errors if peer creation fails") Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1614006849-25764-1-git-send-email-kvalo@codeaurora.org
2021-02-24ath11k: qmi: use %pad to format dma_addr_tGeert Uytterhoeven
If CONFIG_ARCH_DMA_ADDR_T_64BIT=n: drivers/net/wireless/ath/ath11k/qmi.c: In function ‘ath11k_qmi_respond_fw_mem_request’: drivers/net/wireless/ath/ath11k/qmi.c:1690:8: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘dma_addr_t’ {aka ‘unsigned int’} [-Wformat=] 1690 | "qmi req mem_seg[%d] 0x%llx %u %u\n", i, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1691 | ab->qmi.target_mem[i].paddr, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | dma_addr_t {aka unsigned int} drivers/net/wireless/ath/ath11k/debug.h:64:30: note: in definition of macro ‘ath11k_dbg’ 64 | __ath11k_dbg(ar, dbg_mask, fmt, ##__VA_ARGS__); \ | ^~~ drivers/net/wireless/ath/ath11k/qmi.c:1690:34: note: format string is defined here 1690 | "qmi req mem_seg[%d] 0x%llx %u %u\n", i, | ~~~^ | | | long long unsigned int | %x Fixes: d5395a5486596308 ("ath11k: qmi: add debug message for allocated memory segment addresses and sizes") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210221182754.2071863-1-geert@linux-m68k.org
2021-02-22Revert "ath9k: fix ath_tx_process_buffer() potential null ptr dereference"Shuah Khan
This reverts commit a56c14bb21b296fb6d395164ab62ef2e419e5069. ath_tx_process_buffer() doesn't dereference or check sta and passes it to ath_tx_complete_aggr() and ath_tx_complete_buf(). ath_tx_complete_aggr() checks the pointer before use. No problem here. ath_tx_complete_buf() doesn't check or dereference sta and passes it on to ath_tx_complete(). ath_tx_complete() doesn't check or dereference sta, but assigns it to tx_info->status.status_driver_data[0] ath_tx_complete_buf() is called from ath_tx_complete_aggr() passing null ieee80211_sta pointer. There is a potential for dereference later on, if and when the tx_info->status.status_driver_data[0]is referenced. In addition, the rcu read lock might be released before referencing the contents. ath_tx_complete_buf() should be fixed to check sta perhaps? Worth looking into. Reverting this patch because it doesn't solve the problem and introduces memory leak by skipping buffer completion if the pointer (sta) is NULL. Fixes: a56c14bb21b2 ("ath9k: fix ath_tx_process_buffer() potential null ptr dereference") Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210217211801.22540-1-skhan@linuxfoundation.org
2021-02-22ath11k: print hardware name and version during initialisationKalle Valo
This way it's easy for the user to find what device is actually installed. This also helps reporting bugs. Screenshot: [ 459.988812] ath11k_pci 0000:06:00.0: BAR 0: assigned [mem 0xdb000000-0xdbffffff 64bit] [ 459.988867] ath11k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 459.997048] ath11k_pci 0000:06:00.0: qca6390 hw2.0 [ 460.058093] mhi mhi0: Requested to power ON [ 460.059741] mhi mhi0: Power on setup success [ 460.476924] ath11k_pci 0000:06:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff [ 460.477032] ath11k_pci 0000:06:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613589400-18891-1-git-send-email-kvalo@codeaurora.org
2021-02-18ath9k: fix transmitting to stations in dynamic SMPS modeFelix Fietkau
When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Cc: stable@vger.kernel.org Reported-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210214184911.96702-1-nbd@nbd.name
2021-02-18ath11k: Enable radar detection for 160MHz secondary segmentLavanya Suresh
WMI_CHAN_INFO_DFS_FREQ2 needs to be set in wmi vdev start command chan info parameter, to enable radar detection for secondary segment in 160MHz. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01717-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613480547-28810-1-git-send-email-lavaks@codeaurora.org
2021-02-18ath11k: Fix sounding dimension config in HE capLavanya Suresh
Number of Sounding dimensions config received from firmware for bandwidth above 80MHz is cleared, and proper value is not set again. So not resetting it to accept the config from firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01689-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613460136-7170-1-git-send-email-lavaks@codeaurora.org
2021-02-17ath11k: add qcn9074 pci device supportAnilkumar Kolli
QCN9074 is PCI based 11ax radio. - has 2G/5G/6G variants. - has NSS 2x2 and 4x4 variants. QCN9074 uses 45MB of HOST DDR memory, target requests host memory in segments, each segment is of 2MB size and is physcial contiguous and use static window configuration. Currently there are still two issues with QCN9074, see below. So we don't add QCN9074 PCI id yet to make sure the driver is loaded. The id will be added only after the issues are fixed. Issue 1: ath11k_pci 0000:06:00.0: qmi failed memory request, err = -110 ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-110 Issue 2: ath11k_pci 0000:06:00.0: firmware crashed: MHI_CB_SYS_ERROR ath11k_pci 0000:06:00.0: qmi failed set mode request, mode: 0, err = -110 ath11k_pci 0000:06:00.0: qmi failed to send wlan fw mode:-110 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-12-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add extended interrupt support for QCN9074Karthikeyan Periyasamy
Update the specific hw ring mask for QCN9074. Update the timestamp information while processing DP and CE interrupts. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-11-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add CE interrupt support for QCN9074Karthikeyan Periyasamy
Define host CE configuration for QCN9074 since the max CE count is six. Available MSI interrupt is five so cannot able to map the ce_id directly for the msi_data_idx. Added get_ce_msi_idx ops in ath11k_hif_ops to get the CE MSI idx which is used to initialize the CE ring. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-10-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add data path support for QCN9074Karthikeyan Periyasamy
hal rx descriptor is different for QCN9074 target type. since rx_msdu_end, rx_msdu_start, rx_mpdu_start elements are in different placement/alignment. In order to have generic data path, introduce platform specific hal rx descriptor access ops in ath11k_hw_ops. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-9-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add hal support for QCN9074Karthikeyan Periyasamy
Define the hal ring address and ring meta descriptor mask for QCN9074. Move the platform specific address to the ath11k_hw_regs. Define tx_mesh_enable ops in ath11k_hw_ops since its accessing platform specific TCL descriptor. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-8-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: add static window support for register accessKarthikeyan Periyasamy
Three window slots can be configure. First window slot dedicate for dynamic selection and remaining two slots dedicate for static selection. To optimise the window selection, frequent registers (UMAC, CE) are configure in static window slot. so that we minimise the window selection. Other registers are configure in dynamic window slot. Get the window start address from the respective offset and access the read/write register. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-7-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Add qcn9074 mhi controller configAnilkumar Kolli
Add MHI config for QCN9074 also populate ath11k_hw_params for QCN9074. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-6-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Update memory segment count for qcn9074Anilkumar Kolli
QCN9074 FW requests three types memory segments during the boot, qmi mem seg type 1 of size 15728640 qmi mem seg type 4 of size 3735552 qmi mem seg type 3 of size 1048576 Segment type 3 is for M3 coredump memory. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-5-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: qmi: increase the number of fw segmentsAnilkumar Kolli
QCN9074 firmware uses 20MB of HOST DDR memory, fw requests the memory in segmnets of size 1MB/512KB/256KB. Increase the number of fw memory segments to 52. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-4-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Move qmi service_ins_id to hw_paramsAnilkumar Kolli
qmi service_ins_id is unique for QCA6390 and QCN9074, this is needed for adding QCN9074 support. No functional changes. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-3-git-send-email-akolli@codeaurora.org
2021-02-17ath11k: Refactor ath11k_msi_configAnilkumar Kolli
Move ath11k_msi_config to array of structures to add multiple pci devices support. No functional changes. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r2-00012-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612946530-28504-2-git-send-email-akolli@codeaurora.org
2021-02-16ath11k: debugfs: Fix spelling mistake "Opportunies" -> "Opportunities"Colin Ian King
There is a spelling mistake in some debug text, fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210212113627.212787-1-colin.king@canonical.com
2021-02-16ath9k: fix ath_tx_process_buffer() potential null ptr dereferenceShuah Khan
ath_tx_process_buffer() references ieee80211_find_sta_by_ifaddr() return pointer (sta) outside null check. Fix it by moving the code block under the null check. This problem was found while reviewing code to debug RCU warn from ath10k_wmi_tlv_parse_peer_stats_info() and a subsequent manual audit of other callers of ieee80211_find_sta_by_ifaddr() that don't hold RCU read lock. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/43ed9abb9e8d7112f3cc168c2f8c489e253635ba.1613090339.git.skhan@linuxfoundation.org
generated by cgit (git 2.34.1) at 2025-08-10 13:13:34 +0000