summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/dvm
AgeCommit message (Collapse)Author
2012-11-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c drivers/net/wireless/iwlwifi/pcie/tx.c
2012-11-21iwlwifi: fix the basic CCK rates calculationEmmanuel Grumbach
Fix a copy paste error in iwl_calc_basic_rates which leads to a wrong calculation of CCK basic rates. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-21iwlwifi: remove effectless assignmentEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19mac80211: make remain_on_channel() op pass vif paramEliad Peller
Drivers (e.g. wl12xx) might need to know the vif to roc on (mainly in order to configure the rx filters correctly). Add the vif to the op params, and update the current users (iwlwifi) to use the new api. Signed-off-by: Eliad Peller <eliad@wizery.com> [fix hwsim] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-19iwlwifi: disallow MFP with software cryptoJohannes Berg
When software crypto is enabled, it isn't safe to enable MFP since the firmware interprets some management packets, and with MFP it would do so without proper validation. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c
2012-11-14iwlwifi: fix monitor mode FCS flagJohannes Berg
When the firmware is in SNIFFER mode, it leaves the FCS at the end of frame. Not telling mac80211 means it won't add the right flag to the radiotap header and that confuses wireshark. Since mac80211 doesn't have a per-packet flag, set the HW flag dynamically. This works as the monitor vif can only be present in the driver by itself. This fixes a regression introduced by my commit 578977264199de9815ace51ade87cec4894cf010 Author: Johannes Berg <johannes.berg@intel.com> Date: Fri May 11 10:53:18 2012 +0200 iwlwifi: support explicit monitor interface Cc: stable@vger.kernel.org [3.5+] Reported-by: MARK PHILLIPS <mark.phillips@virgin.net> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-13mac80211: support RX_FLAG_MACTIME_ENDThomas Pedersen
Allow drivers to indicate their mactime is at RX completion and adjust for this in mac80211. Also rename the existing RX_FLAG_MACTIME_MPDU to RX_FLAG_MACTIME_START to clarify its intent. Based on similar code by Johannes Berg. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> [fix docs, atheros drivers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07iwlwifi: remove SKU/antenna messages by defaultJohannes Berg
There's no reason to print these all the time, the messages aren't all that interesting. Leave them as DEBUG_INFO though, just in case. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07iwlwifi: use ieee80211_free_txskbJohannes Berg
To let mac80211 clean up any TX information when a frame is dropped, use ieee80211_free_txskb(). Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: zero trans_cfg before settings its fieldsEmmanuel Grumbach
People tend not to set the fields they want to leave as 0. So make sure the struct is zeroed properly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: check the SCD conf from ALIVE responseEmmanuel Grumbach
The ALIVE response of new fw inclues the base address of the SCD in SRAM. Until we read it from a prph register, which was set by the fw. Since the fw might well stop updating the prph register, add a WARN when there is an inconsitency between the ALIVE response and the register to catch any change in the behavior. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: fix queue flush confusionJohannes Berg
The flush_control parameter to iwlagn_txfifo_flush is passed as an internal value (context flags) and then sent to the device, that can't be right. Fix the confusion by removing the parameter, always use IWL_DROP_ALL that is redefined according to the firmware API in the flush control. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: don't clear CTL_AMPDU on frame statusJohannes Berg
There's no reason to clear the CTL_AMPDU flag on transmitted frame status, it's not used by the driver here and mac80211 only uses it for some rate statistics. Also remove a stray space in the function. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05iwlwifi: fix flush commandJohannes Berg
The flush command really flushes queues, not FIFOs, and the first 32 bits indicate the queues to flush, not FIFOs. Change the command accordingly. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-31iwlwifi: don't call stop_device twiceEmmanuel Grumbach
When we unregister from mac80211 it will down the device anyway. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-31iwlwifi: handle RFKILL logic in the transport layerEmmanuel Grumbach
No HCMD can be sent while RFKILL is asserted. If a SYNC command is running while RFKILL is asserted the fw will silently discard it. This means that the driver needs to wake the process that sleeps on the CMD_SYNC. Since the RFKILL interrupt is handled in the transport layer and the code that sleeps in CMD_SYNC is also in the transport layer, all this logic can be handled there. This simplifies the work of the op_mode. So the transport layer will now return -ERFKILL when a CMD is sent and RFKILL is asserted. This will be the case even when the CMD is SYNC. The transport layer will return -ERFKILL straight away. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-23Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c net/mac80211/mlme.c
2012-10-23iwlwifi: remove MFP Kconfig optionAssaf Krauss
Remove the Kconfig option CONFIG_IWLWIFI_EXPERIMENTAL_MFP, if the firmware doesn't support MFP then the user shouldn't have the option to enable it as it won't work correctly. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: don't print the Intel banner twiceEmmanuel Grumbach
Once in bus enumeration is enough, no need to print it again when the op_mode loads. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: remove unused variablesJohannes Berg
Remove a number of variables that are assigned, but not used. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: make data frame tracing optionalJohannes Berg
When tracing in iwlwifi, we get all data. Most of the time, we don't need it, and it just takes up a lot of extra space in the trace. Make this optional by recording the data into two separate trace events if it is needed. Without it, record only the content of non-data and EAPOL TX frames. As a result, tracing without the data tracepoints will record meta information including the 802.11 headers for all frames but will not record the contents of data frames to reduce trace overhead. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16iwlwifi: fix 6000 series channel switch commandJohannes Berg
The channel switch command for 6000 series devices is larger than the maximum inline command size of 320 bytes. The command is therefore refused with a warning. Fix this by allocating the command and using the NOCOPY mechanism. Cc: stable@kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-25Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-09-24Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-09-20iwlwifi: fix async station command crashJohannes Berg
Before Emmanuel's change to use a copy of the command ("iwlwifi: get the correct HCMD in the response handler") the iwl_add_sta_callback() function would have used a random pointer to somewhere when processing responses to an async command, while that wasn't valid data it was at least a valid pointer. Now, the pointer will be NULL in this case, thus crashing. Fix this by exiting the function early if no command is passed back which means it was sent asynchronously. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-19iwlwifi: use eth_broadcast_addrJohannes Berg
Instead of memcpy() from a static array, just use the new helper function eth_broadcast_addr(). Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-10iwlwifi: load firmware in chunksJohannes Berg
Instead of allocating one big chunk of DMA-coherent memory for the firmware and keeping it around, only vmalloc() the firmware and copy it into a single page of DMA-coherent memory for the upload. The advantage is that we don't need DMA memory for the firmware image that is stored while the driver is operating, we only need it while uploading. This will make it easier for the driver to work if the system has fragmented memory. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-09-05iwlwifi: report A-MPDU statusJohannes Berg
Since the firmware will give us an A-MPDU bit and only a single PHY information packet for all the subframes in an A-MPDU, we can easily report the minimal A-MPDU information for radiotap. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg
2012-09-04iwlwifi: fix antenna bitmaskJohannes Berg
The device only supports a maximum of three antennas, and only three bits are used, the fourth bit is the A-MPDU indicator. The only consequence of this is reporting invalid information in radiotap, so this isn't an important change. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-08-21iwlwifi: protect SRAM debugfsJohannes Berg
If the device is not started, we can't read its SRAM and attempting to do so will cause issues. Protect the debugfs read. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-21iwlwifi: fix FW restart on init FWAmit Beka
When unregistered with mac80211, we can't call its functionality for FW restart, so avoid it and prevent automatic FW restart for the init firmware. Signed-off-by: Amit Beka <amit.beka@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-06iwlwifi: disable greenfield transmissions as a workaroundJohannes Berg
There's a bug that causes the rate scaling to get stuck when it has to use single-stream rates with a peer that can do GF and SGI; the two are incompatible so we can't use them together, but that causes the algorithm to not work at all, it always rejects updates. Disable greenfield for now to prevent that problem. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Tested-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-31mac80211: move TX station pointer and restructure TXThomas Huehn
Remove the control.sta pointer from ieee80211_tx_info to free up sufficient space in the TX skb control buffer for the upcoming Transmit Power Control (TPC). Instead, the pointer is now on the stack in a new control struct that is passed as a function parameter to the drivers' tx method. Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: Felix Fietkau <nbd@openwrt.org> [reworded commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-27iwlwifi: reduce max remain-on-channel durationJohannes Berg
Due to the way the PAN parameters are set up, the maximum duration isn't 1000 but much lower, set it to 500 which is safe (somewhere around 550 might be possible.) Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-26iwlwifi: get the correct HCMD in the response handlerEmmanuel Grumbach
Until now, the response handler of a Host Command got the exact same pointer that was also given to the DMA engine. We almost never need to the Host Command that was sent while handling its response, but when we do need it, we see that the command has been modified. This mystery has been elucidated. The FH (our DMA engine) writes its meta data on the buffer in the DRAM. Of course it copies the buffer to the NIC first. This was known to happen for Tx command, but as a matter of fact, it happens to all TFD brought by the FH which doesn't care much about what it brings from DRAM to internal SRAM. So copy the Host Command to yet another buffer so that we can properly pass the buffer that was sent originally to the fw. Do that only if it was request by the user since very few flows need to get the HCMD sent in the response handler. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-26iwlwifi: fix aggregation check indentationJohannes Berg
Align the code to inside the WARN_ON() as it should. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-26iwlwifi: rework the iwlwifi debugfs structureMeenakshi Venkataraman
The generic part of the driver now creates all debugfs directories. It creates a root directory directly in the the root of the debugfs filesystem and within that directories for each device, named after the device ID of the devices iwlwifi is attached to. In the cfg80211/mac80211 directory there's now a link to the toplevel iwlwifi debugfs directory to make it easier to find the debugfs files. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-26iwlwifi: clean up properly when registration with mac80211 failsMeenakshi Venkataraman
If registration with mac80211 fails, stop the thermal throttling and testmode work that were previously started. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-07-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/iwmc3200wifi/cfg80211.c drivers/net/wireless/mwifiex/cfg80211.c
2012-07-12mac80211: add time synchronisation with BSS for assocJohannes Berg
Some drivers (iwlegacy, iwlwifi and rt2x00) today use the bss_conf.last_tsf value. By itself though that value is completely worthless since it may be ancient. What really is needed is synchronisation between some device time and the TSF. To clarify this, rename bss_conf.last_tsf to sync_tsf and add sync_device_ts which is obtained from rx_status which gets a new field device_timestamp for this purpose. This is intentionally not using the mactime field since that is used for other things and in IBSS is expected to sync with the IBSS's TSF which isn't necessarily true for the device timestamp. Also, since we have the information and it's useful even before the connection has been established, give all the timing details to the driver before authenticating. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-07-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/mlme.c
2012-07-09iwlwifi: set correct 32 bit boost register valueWey-Yi Guy
Newer devices use 32 bit for boost register, set the correct value for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-05iwlwifi: REPLY_RX doesn't exist any moreEmmanuel Grumbach
Remove this dead code, it is unused for device newer than 4965. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-03iwlwifi: disallow log_event access if interface downRichard A. Griffiths
'echo 1 > log_event' generates the bogus "MAC is in deep sleep" or "Timeout waiting for hardware access" log messages when the interface is down, we should just disallow accessing the device through debugfs when it is down. Signed-off-by: Richard A. Griffiths <richardx.a.griffiths@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-07-31 12:38:29 +0000