summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2024-02-02wifi: iwlwifi: mvm: Add support for removing responder TKsIlan Peer
When removing a PASN station, the TK must be removed before the station is removed as otherwise the FW would assert. To handle this, store the key configuration, and use it to remove the key when the station is removed. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240131230734.3e6364730c04.Ia76dc4a9d399f1f68ac6b157d844b63f74d5159f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: disable eSR when BT is activeMiri Korenblit
eSR should be disabled when BT Coex is active and: - LB link is the primary link. - LB link is the secondary link and the predicted BT penalty (the wifi loss rate caused by BT interference) is higher than a given threshold. If one of the conditions above is no longer true then re-enable eSR. In order to implement this, add support for version 5 of BT_PROFILE_NOTIFICATION, in which the bt penalty is provided by FW. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240131225342.b922b6485af8.I7d808ce535a7372aca9cb85c045755e6788a4904@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: ath12k: refactor the rfkill workerKarthikeyan Periyasamy
Currently, the rfkill worker handler access mac80211 HW from the radio/link structure. This is will be incorrect for single wiphy model, as they will hold multiple link/radio structures. To fix this, access mac80211 HW based on the number of hardware in the SoC/chip. This approach makes the rfkill worker handler compatible with both multi wiphy and single wiphy models. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240125154555.3169706-1-quic_periyasa@quicinc.com
2024-02-02wifi: ath12k: add processing for TWT disable eventLingbo Kong
When ath12k send TWT disable command to firmware, firmware will return a TWT disable event to ath12k. Through the analysis of TWT disable event status, we can easily obtain the status of TWT disable command. It can be more convenient to debug TWT. This patch works with WCN7850 and QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240122085336.3985-3-quic_lingbok@quicinc.com
2024-02-02wifi: ath12k: add processing for TWT enable eventLingbo Kong
When ath12k send TWT enable command to firmware, firmware will return a TWT enable event to ath12k. Through the analysis of TWT enable event status, we can easily obtain the status of TWT enable command. It can be more convenient to debug TWT. This patch works with WCN7850 and QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240122085336.3985-2-quic_lingbok@quicinc.com
2024-02-02wifi: ath12k: disable QMI PHY capability learn in split-phy QCN9274Raj Kumar Bhagat
QMI PHY capability learn is used to get PHY count information to support single/multi link operation (SLO/MLO) configuration. The QCN9274 dualmac firmware currently do not support SLO/MLO, if two PHYs are within the same chip. Due to this firmware crashes in split-phy QCN9274, while bringing up AP with MLO parameter enabled in QMI host capability request message. The QMI PHY capability learn is not required for split-phy QCN9274, if SLO/MLO is not supported within the same chip. Hence, disable QMI PHY capability learn support in split-phy QCN9274. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-14-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: Read board id to support split-PHY QCN9274Ganesh Babu Jothiram
QCN9274 can support single-PHY or split-PHY architecture. Currently, only the single-PHY architecture is supported in ath12k. The split-PHY QCN9274 requires different AMSS firmware binary "amss_dualmac.bin". Hence, add support to read board id from OTP. Based on board id decide whether single-mac / dual-mac firmware needs to be downloaded to the target. Also, update HW param max_radios to support split-PHY in QCN9274. Also, add new Firmware IE for firmware_N.bin "ATH11K_FW_IE_AMSS_DUALMAC_IMAGE" to support dualmac QCN9274. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ganesh Babu Jothiram <quic_gjothira@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-13-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: fix PCI read and writeP Praneesh
Currently, PCI read is failing for the registers belonging to SECURITY_CONTROL_WLAN registers. These registers read is required to read the board-id to identify the dual-mac QCN9274 hardware. The failure is because, for these registers (SECURITY_CONTROL_WLAN) offset, ath12k_pci_get_window_start() returns window_start as 0. Due to this PCI read is done without PCI select window and with window_start offset as 0. Hence, fix PCI read and write by doing PCI select window and by using the correct window_start offset - WINDOW_START for SECURITY_CONTROL_WLAN registers. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-12-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: add MAC id support in WBM error pathKarthikeyan Periyasamy
When more than one pdev is supported in the chip/SoC, the packet belonging to second pdev is given to first pdev due to not identifying the MAC id in the WBM error path. So ping fails. In WBM error path, src link id information not available in the descriptor. So get this information from the msdu_end 64bit tag. It is necessary to get the src link id to identify the MAC id in the given chip. Then only we can pass the skb to the corresponding pdev. The msdu_end 64bit tag is available only if compact Rx TLVs descriptors are used. Thus, src link id is fetched correctly in WBM error path when compact descriptors are in use. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-11-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: subscribe required word mask from rx tlvKarthikeyan Kathirvel
Most of the RX descriptors fields are currently not used in the ath12k driver. Hence add support to selectively subscribe to the required quad words (64 bits) within msdu_end and mpdu_start of rx_desc. Add compact rx_desc structures and configure the bit mask for Rx TLVs (msdu_end, mpdu_start, mpdu_end) via registers. With these registers SW can configure to DMA the partial TLV struct to Rx buffer. Each TLV type has its own register to configure the mask value. The mask value configured in register will indicate if a particular QWORD has to be written to rx buffer or not i.e., if Nth bit is enabled in the mask Nth QWORD will be written and it will not be written if the bit is disabled in mask. While 0th bit indicates whether TLV tag will be written or not. Advantages of Qword subscription of TLVs - Avoid multiple cache-line misses as the all the required fields of the TLV are within 128 bytes. - Memory optimization as TLVs + DATA + SHINFO can fit in 2k buffer even for 64 bit kernel. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-10-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: remove hal_desc_sz from hw paramsRaj Kumar Bhagat
With word mask subscription support, the rx_desc structure will change. The fields in this structure rx_desc will be reduced to only the required fields. To make word mask subscription changes compatible with the older firmware version (firmware that does not support word mask subscription), two different structures of rx_desc will be required for the same hardware. The hardware param hal_desc_sz value cannot be constant for the same hardware. It depends on the size of rx_desc structure which may change based on firmware capability to support word mask subscription. Hence, remove hal_desc_sz from hardware param and add hal_rx_ops to get the size of rx_desc in run time. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-9-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: split hal_ops to support RX TLVs word mask compactionRaj Kumar Bhagat
With word mask subscription support, the rx_desc structure will change. The fields in this structure rx_desc will be reduced to only the required fields. To make word mask subscription changes compatible with the older firmware version (firmware that does not support word mask subscription), two different structures of rx_desc will be required for the same hardware. Most of the hal_ops are directly related to rx_desc. Hence, split hal_ops into operations that are independent of rx_desc (hal_ops) and the operations that are directly dependent on rx_desc (hal_rx_ops). These hal_rx_ops depend on both hardware and firmware hence move them out of hw_params. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-8-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: fix firmware assert during insmod in memory segment modeAaradhana Sahu
In segment memory mode, firmware allocates memory segments of size 2 MB. This 2 MB memory is used by firmware for the number of peers. This number of peer is sent from host to firmware during WMI init command. For single-phy the number of peers sent is TARGET_NUM_PEERS_SINGLE = 529 (512 + 17). While for split-phy number of peers sent to firmware is TARGET_NUM_PEERS_DBS = 2 *(512 + 17) = 1058. With this 1058 number of peers firmware is unable to allocate memory in 2 MB segment and firmware crash is observed. Hence, fix this firmware crash by reducing the number of stations TARGET_NUM_STATIONS for split-phy. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-7-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: Add logic to write QRTR node id to scratchP Praneesh
Currently only one MHI device is registered successfully on platform having two or more identical MHI devices. This is beacuse QMI service runs with identical QRTR node ID. And, qrtr-lookup cannot register more than one QMI service with identical node ID. Hence, generate a unique QRTR instance ID from PCIe domain number and bus number. QMI allows node id to be written on scratch register. Add logic to write QRTR node id to the register. It is available for firmware to uniquely identify an instance. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-6-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: fix fetching MCBC flag for QCN9274Raj Kumar Bhagat
In QCN9274, RX packet's multicast and broadcast(MCBC) flag is fetched from RX descriptor's msdu_end info5 member but it is not correct for QCN9274. Due to this with encryption, ARP request packet is wrongly marked as MCBC packet and it is sent to mac80211 without setting RX_FLAG_PN_VALIDATED & RX_FLAG_DECRYPTED flag. This results in packet getting dropped in mac80211. Hence ping initiated from station to AP fails. Fix this by fetching correct MCBC flag in case of QCN9274. For QC9274 MCBC flag should be fetched from RX descriptor's mpdu_start info6 member. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 8f04852e90cb ("wifi: ath12k: Use msdu_end to check MCBC") Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-5-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: add support for peer meta data versionHarshitha Prem
Add support to process WMI_TLV_SERVICE_PEER_METADATA_V1A_V1B_SUPPORT service bit. If this service bit is set by firmware, then it expects host to set rx_peer_meta_data_ver in wmi_resource_config's flags2 with value 3 for QCN9274 to indicate as V1B meta version. If this is not set firmware crash is seen during peer addition. Hence, if WMI_TLV_SERVICE_PEER_METADATA_V1A_V1B_SUPPORT service bit is set by firmware, set correct peer metadata version to avoid firmware crash. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-4-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: fetch correct pdev id from WMI_SERVICE_READY_EXT_EVENTIDSowmiya Sree Elavalagan
Currently while fetching for pdev id from WMI_SERVICE_READY_EXT_EVENTID we consider 32 bit pdev_id in ath12k_wmi_caps_ext_params structure. But Firmware sends lower 16 bit for pdev id along with higher 16 bit for hw_link_id. Due to this wrong pdev id is fetched. This wrong pdev id when used for WMI commands leads to Firmware crash. Hence fetch the correct pdev id considering only the lower 16 bits. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-3-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: indicate NON MBSSID vdev by default during vdev startSriram R
When any VDEV is started, MBSSID flags are passed to firmware to indicate if its a MBSSID/EMA AP vdev. If the interface is not an AP or if the AP doesn't support MBSSID, the vdev needs to be brought up as a non MBSSID vdev. Set these flags as a non MBSSID AP by default which can be updated as and when MBSSID support is added in ath12k. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-2-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: add firmware-2.bin supportRaj Kumar Bhagat
Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath12k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath12k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath12k_fw_features is empty, the patches adding features will add the flags. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123122812.3811251-1-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath11k: change to move WMI_VDEV_PARAM_SET_HEMU_MODE before ↵Wen Gong
WMI_PEER_ASSOC_CMDID Currently when connecting to an AP with 11AX-HE phy mode, host sends WMI_VDEV_PARAM_SET_HEMU_MODE parameter to firmware after WMI_PEER_ASSOC_CMDID command. This results in TXBF not working, because firmware calculates TXBF values while handling WMI_PEER_ASSOC_CMDID, however at that time WMI_VDEV_PARAM_SET_HEMU_MODE has not been sent yet. See below log: AP sends "VHT/HE/EHT NDP Announcement" to station, and station sends "Action no Ack" of category code HE to AP, the "Nc Index" and "Codebook Information" are wrong: Issued action: IEEE 802.11 Action No Ack, Flags: ........ IEEE 802.11 wireless LAN Fixed parameters Category code: HE (30) HE Action: HE Compressed Beamforming And CQI (0) Total length: 152 HE MIMO Control: 0x0004008018 .... .... .... .... .... .... .... .... .... .000 = Nc Index: 1 Column (0) .... .... .... .... .... .... .... ..0. .... .... = Codebook Information: 0 Change to send WMI_VDEV_PARAM_SET_HEMU_MODE before WMI_PEER_ASSOC_CMDID, then firmware will calculate the TXBF values with valid parameters instead of empty values. TXBF works well and throughput performance is improved from 80 Mbps to 130 Mbps with this patch. Good action after this patch: IEEE 802.11 Action No Ack, Flags: ........ IEEE 802.11 wireless LAN Fixed parameters Category code: HE (30) HE Action: HE Compressed Beamforming And CQI (0) Total length: 409 HE MIMO Control: 0x0004008219 .... .... .... .... .... .... .... .... .... .001 = Nc Index: 2 Columns (1) .... .... .... .... .... .... .... ..1. .... .... = Codebook Information: 1 This change applies to all chipsets. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: 38dfe775d0ab ("wifi: ath11k: push MU-MIMO params from hostapd to hardware") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240131021832.17298-1-quic_bqiang@quicinc.com
2024-02-02wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is completeToke Høiland-Jørgensen
The ath9k_wmi_event_tasklet() used in ath9k_htc assumes that all the data structures have been fully initialised by the time it runs. However, because of the order in which things are initialised, this is not guaranteed to be the case, because the device is exposed to the USB subsystem before the ath9k driver initialisation is completed. We already committed a partial fix for this in commit: 8b3046abc99e ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()") However, that commit only aborted the WMI_TXSTATUS_EVENTID command in the event tasklet, pairing it with an "initialisation complete" bit in the TX struct. It seems syzbot managed to trigger the race for one of the other commands as well, so let's just move the existing synchronisation bit to cover the whole tasklet (setting it at the end of ath9k_htc_probe_device() instead of inside ath9k_tx_init()). Link: https://lore.kernel.org/r/ed1d2c66-1193-4c81-9542-d514c29ba8b8.bugreport@ubisectech.com Fixes: 8b3046abc99e ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_tx_get_packet()") Reported-by: Ubisectech Sirius <bugreport@ubisectech.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240126140218.1033443-1-toke@toke.dk
2024-02-02wifi: ath9k: remove redundant assignment to variable retColin Ian King
The variable ret is being assigned a value but it isn't being read afterwards. The assignment is redundant and so ret can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240116155452.2315351-1-colin.i.king@gmail.com
2024-02-01wifi: rtl8xxxu: fix error messagesDan Carpenter
The first parameter of WARN_ONCE() is a condition so this code will end up printing the function name instead of the proper message. Fixes: 3ff7a05996f9 ("wifi: rtl8xxxu: support setting bssid register for multiple interfaces") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/7b144531-a8da-4725-8911-9b614a525a35@moroto.mountain
2024-02-01wifi: rtw89: 8922a: add more fields to beacon H2C command to support multi-linksPo-Hao Huang
To support multi-links beacon, it needs more fields. But currently we still only support legacy AP mode. Only update struct to fit expected size of firmware. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126063356.17857-8-pkshih@realtek.com
2024-02-01wifi: rtw89: update ps_state register for chips with different generationChin-Yen Lee
The ps_state register is used for driver to check if the WiFi chip leave power save mode successfully. The register is changed for new generation, so update it. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126063356.17857-7-pkshih@realtek.com
2024-02-01wifi: rtw89: add new H2C for PS mode in 802.11be chipChin-Yen Lee
Because 802.11be chip support MLO mode, driver needs to send new H2C to pass more connected channel information to firmware, to ensure PS mode work fine. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126063356.17857-6-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: add ieee80211_ops::hw_scanPo-Hao Huang
This adds support for hardware scan after FW version 0.34.35. Currently we only support scanning on single hardware band and support of dual band scan will be added in the future. Adjust the current flow to make driver compatible with different generation ICs. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126063356.17857-5-pkshih@realtek.com
2024-02-01wifi: rtw89: prepare scan leaf functions for wifi 7 ICsPo-Hao Huang
The channel field slightly differs between WiFi 6 and WiFi 7. So we prepare some required functions in advance, this doesn't change existing wifi 6 ICs behavior. This H2C prepares the channel list to be scanned for. With layout as the following: +--------+--------------------+-------------------+-----------------------+ | header | number of channels | channel info size | channel_info * number | +--------+--------------------+-------------------+-----------------------+ Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126063356.17857-4-pkshih@realtek.com
2024-02-01wifi: rtw89: debug: add FW log component for scanPo-Hao Huang
This allows scan related logs when FW log debug mode is on. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126063356.17857-3-pkshih@realtek.com
2024-02-01wifi: rtw89: update scan C2H messages for wifi 7 ICPo-Hao Huang
Add definition and parsing for wifi 7 extended fields. These fields include hardware index which is current reporting, timestamp and self defined sequences for debug purposes. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126063356.17857-2-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: set chip_ops FEM and GPIO to NULLPing-Ke Shih
The chip_ops::fem_setup is to get if a hardware module type contains PA and LNA that will affect how RF calibrations do. The chip_ops::rfe_gpio is to set GPIO PIN MUX according to hardware module type too. 8922A doesn't have these special module types yet, so leave them as NULL. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033813.12562-1-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: add chip_ops to get thermal valuePing-Ke Shih
Get thermal value as a clue to do RF calibration if the delta is larger than a threshold, but 8922A doesn't need this, so we only read out the value when debugging to reduce IO. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033802.12508-1-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: add RF read/write v2Ping-Ke Shih
Implement indirect interface v2 to read/write RF registers via PHY registers for 8922A. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033637.12330-5-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: add chip_ops::cfg_txrx_pathPing-Ke Shih
This function is to set TX/RX path. Especially for 1SS rate, it can select to TX on one or two antenna. Before this operation, stop hardware to prevent transmitting/receiving unexpected packets. After that, restore settings and reset hardware to prevent it stays on abnormal state. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033637.12330-4-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: implement {stop,resume}_sch_tx and cfg_ppduPing-Ke Shih
To set TX/RX path or set channel, we need these helpers to stop TX and restore settings. The sch_tx stands for scheduler TX channel, and the cfg_ppdu is to stop reporting PPDU status, so we should stop them during setting. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033637.12330-3-pkshih@realtek.com
2024-02-01wifi: rtw89: 8922a: hook handlers of TX/RX descriptors to chip_opsPing-Ke Shih
Hook implemented handlers to chip_ops, and fill packet frequency and signal strength to RX status from RX PPDU status packet. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240124033637.12330-2-pkshih@realtek.com
2024-02-01wifi: rtw89: pci: enlarge RX DMA buffer to consider size of RX descriptorPing-Ke Shih
Hardware puts RX descriptor and packet in RX DMA buffer, so it could be over one buffer size if packet size is 11454, and then it will be split into two segments. WiFi 7 chips use larger size of RX descriptor, so enlarge DMA buffer size according to RX descriptor to have better performance and simple flow. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240121071826.10159-5-pkshih@realtek.com
2024-02-01wifi: rtw89: pci: validate RX tag for RXQ and RPQPing-Ke Shih
PCI RX ring is a kind of read/write index ring, and DMA and ring index are asynchronous, so suddenly driver gets newer index ahead before DMA. To resolve this rare situation, we use a RX tag as helpers to make sure DMA is done. The RX tag is a 13-bit value, and range is from 1 ~ 0x1FFF, but 0 isn't used so should be skipped. Only enable this validation to coming WiFi 7 chips, because existing chips use different design and don't really meet this situation. Add missed rx_ring_eq_is_full for 8851BE by the way. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240121071826.10159-4-pkshih@realtek.com
2024-02-01wifi: rtw89: pci: interrupt v2 refine IMR for SERZong-Zhe Yang
During SER (system error recovery), expect to deal with only ISR related to halt. So, refine IMR configuration. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240121071826.10159-3-pkshih@realtek.com
2024-02-01wifi: rtw89: pci: update SER timer unit and timeout timePing-Ke Shih
Be higher resolution of SER timer unit from 32ms to 16ms to detect abnormal situation more accurately, and set hardware watchdog timer to 4ms. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240121071826.10159-2-pkshih@realtek.com
2024-02-01wifi: iwlwifi: remove extra kernel-docJohannes Berg
This no longer exists, remove the kernel-doc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240128102209.d2192d79bc09.Id9551728d618248dd471382a5283503a8976237a@changeid
2024-01-31wifi: brcmfmac: add linefeed at end of fileArend van Spriel
The following sparse warning was reported: drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: warning: no newline at end of file Fixes: 31343230abb1 ("wifi: brcmfmac: export firmware interface functions") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/all/20240125165128.7e43a1f3@kernel.org/ Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240128093057.164791-2-arend.vanspriel@broadcom.com
2024-01-31Merge tag 'ath-next-20240130' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 We have new features for both ath11k and ath12k. ath12k is now under heavy refactoring in preparation for MLO support. Major changes: ath12k * refactoring in preparation for Multi-Link Operation (MLO) support * 1024 Block Ack window size support * provide firmware wmi logs via a trace event ath11k * 36 bit DMA mask support * support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP)
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for mt76 driversBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the MediaTek mt76 drivers. Here is a sorted list of descriptions. It might make the reviewing process easier. MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers"); MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x02 helpers"); MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers"); MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers"); MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x helpers"); MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers"); MODULE_DESCRIPTION("MediaTek MT76x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7921 core driver"); MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925 core driver"); MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT792x core driver"); MODULE_DESCRIPTION("MediaTek MT792x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers"); Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wilc1000Breno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atmel WILC1000 SPI driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-9-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wl18xxBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WiLink 8 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-8-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for p54spiBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Prism54 SPI wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-7-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wcn36xxBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Qualcomm Atheros WCN3660/3680 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-6-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for ar5523Breno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atheros AR5523 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-5-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for Broadcom WLANBreno Leitao
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom FullMac WLAN drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-4-leitao@debian.org
generated by cgit (git 2.34.1) at 2025-09-12 11:00:50 +0000