summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2024-01-10wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabledRahul Rameshbabu
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Fixes: 5100d5ac81b9 ("b43: Add PIO support for PCMCIA devices") Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231231050300.122806-3-sergeantsagara@protonmail.com
2024-01-10wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabledRahul Rameshbabu
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Log of issue before change (with kernel parameter qos=0): [ +5.112651] ------------[ cut here ]------------ [ +0.000005] WARNING: CPU: 7 PID: 25513 at net/mac80211/util.c:449 __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000067] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000044] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000055] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43(O)] [ +0.000009] CPU: 7 PID: 25513 Comm: irq/17-b43 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] RIP: 0010:__ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000046] Code: 00 45 85 e4 0f 85 9b 00 00 00 48 8d bd 40 09 00 00 f0 48 0f ba ad 48 09 00 00 00 72 0f 5b 5d 41 5c 41 5d 41 5e e9 cb 6d 3c d0 <0f> 0b 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8d b4 16 94 00 00 [ +0.000002] RSP: 0018:ffffc90003c77d60 EFLAGS: 00010097 [ +0.000001] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000001] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88820b924900 [ +0.000002] RBP: ffff88820b924900 R08: ffffc90003c77d90 R09: 000000000003bfd0 [ +0.000001] R10: ffff88820b924900 R11: ffffc90003c77c68 R12: 0000000000000000 [ +0.000001] R13: 0000000000000000 R14: ffffc90003c77d90 R15: ffffffffc0fa6f40 [ +0.000001] FS: 0000000000000000(0000) GS:ffff88846fb80000(0000) knlGS:0000000000000000 [ +0.000001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007fafda7ae008 CR3: 000000046d220005 CR4: 00000000000606e0 [ +0.000002] Call Trace: [ +0.000003] <TASK> [ +0.000001] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000044] ? __warn+0x81/0x130 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000045] ? report_bug+0x171/0x1a0 [ +0.000004] ? handle_bug+0x41/0x70 [ +0.000004] ? exc_invalid_op+0x17/0x70 [ +0.000003] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000043] ieee80211_wake_queue+0x4a/0x80 [mac80211] [ +0.000044] b43_dma_handle_txstatus+0x29c/0x3a0 [b43] [ +0.000016] ? __pfx_irq_thread_fn+0x10/0x10 [ +0.000002] b43_handle_txstatus+0x61/0x80 [b43] [ +0.000012] b43_interrupt_thread_handler+0x3f9/0x6b0 [b43] [ +0.000011] irq_thread_fn+0x23/0x60 [ +0.000002] irq_thread+0xfe/0x1c0 [ +0.000002] ? __pfx_irq_thread_dtor+0x10/0x10 [ +0.000001] ? __pfx_irq_thread+0x10/0x10 [ +0.000001] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- [ +0.000065] ------------[ cut here ]------------ [ +0.000001] WARNING: CPU: 0 PID: 56077 at net/mac80211/util.c:514 __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000077] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000073] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000084] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43] [ +0.000012] CPU: 0 PID: 56077 Comm: kworker/u16:17 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] Workqueue: phy7 b43_tx_work [b43] [ +0.000019] RIP: 0010:__ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] Code: 74 11 48 8b 78 08 0f b7 d6 89 e9 4c 89 e6 e8 ab f4 00 00 65 ff 0d 9c b7 34 3f 0f 85 55 ff ff ff 0f 1f 44 00 00 e9 4b ff ff ff <0f> 0b 5b 5d 41 5c 41 5d c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 [ +0.000002] RSP: 0000:ffffc90004157d50 EFLAGS: 00010097 [ +0.000002] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000002] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8882d65d0900 [ +0.000002] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ +0.000001] R10: 00000000000000ff R11: ffff88814d0155a0 R12: ffff8882d65d0900 [ +0.000002] R13: 0000000000000000 R14: ffff8881002d2800 R15: 00000000000000d0 [ +0.000002] FS: 0000000000000000(0000) GS:ffff88846f800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000002] CR2: 00007f2e8c10c880 CR3: 0000000385b66005 CR4: 00000000000606f0 [ +0.000002] Call Trace: [ +0.000001] <TASK> [ +0.000001] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? __warn+0x81/0x130 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? report_bug+0x171/0x1a0 [ +0.000005] ? handle_bug+0x41/0x70 [ +0.000003] ? exc_invalid_op+0x17/0x70 [ +0.000004] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] ieee80211_stop_queue+0x36/0x50 [mac80211] [ +0.000077] b43_dma_tx+0x550/0x780 [b43] [ +0.000023] b43_tx_work+0x90/0x130 [b43] [ +0.000018] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27b/0x3a0 [ +0.000004] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork_asm+0x1b/0x30 [ +0.000006] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: e6f5b934fba8 ("b43: Add QOS support") Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231231050300.122806-2-sergeantsagara@protonmail.com
2024-01-10wifi: rtl8xxxu: Fix off by one initial RTS rateBitterblue Smith
rtl8xxxu_set_basic_rates() sets the wrong initial RTS rate. It sets the next higher rate than the one it should set, e.g. 36M instead of 24M. The while loop was supposed to find the index of the most significant bit which is 1, but it was copied incorrectly from the vendor driver. Use __fls() instead. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/761e6836-6cd6-4930-91b6-0446834655c5@gmail.com
2024-01-10wifi: rtl8xxxu: Fix LED control code of RTL8192FUBitterblue Smith
Some devices, like the Comfast CF-826F, use LED1, which already works. Others, like Asus USB-N13 C1, use LED0, which doesn't work correctly. Write the right values to the LED control registers to make LED0 work as well. This is unfortunately tested only with the Comfast CF-826F. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/7a2c3158-3a45-4466-b11e-fc09802b20e2@gmail.com
2024-01-10wifi: rtl8xxxu: declare concurrent mode support for 8188fMartin Kaistra
Everything is in place now for concurrent mode, we can tell the system that we support it. We will allow a maximum of 2 virtual interfaces, one of them can be in AP mode. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-22-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: make supporting AP mode only on port 0 transparentMartin Kaistra
When the driver is used for concurrent mode, both virtual interfaces can be set to station or AP mode, though only one can be in AP mode at the same time. In order to keep the code simple, use only hw port 0 for AP mode. When an interface is added in AP mode which would be assigned to port 1, use a switch_port function to transparently swap the mapping between virtual interface and hw port. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-21-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: add hw crypto support for AP modeMartin Kaistra
Add a custom function for allocating entries in the sec cam. This allows us to store multiple keys with the same keyidx. The maximum number of sec cam entries for 8188f is 16 according to the vendor driver. Add the number to rtl8xxxu_fileops, so that other chips which might support more entries, can set a different number there. Set the bssid as mac address for group keys instead of just using the ethernet broadcast address and use BIT(6) in the sec cam ctrl entry for differentiating them from pairwise keys like in the vendor driver. Add the TXDESC_EN_DESC_ID bit and the hw_key_idx to tx broadcast/multicast packets in AP mode. Finally, allow the usage of rtl8xxxu_set_key() for AP mode. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-20-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: remove obsolete priv->vifMartin Kaistra
Now that all uses of priv->vif have been converted to priv->vifs[] remove the old attribute. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-19-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: add macids for STA modeMartin Kaistra
Until now, the driver only assigned a dedicated macid for connections made in AP mode, in STA mode the return value of rtl8xxxu_get_macid() was simply 0. To differentiate between port 0 and 1, when both are in STA mode, allocate a second macid (with value 1) and set sta_info->macid according to the used port_num in rtl8xxxu_sta_add(). Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-18-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interface in start_ap()Martin Kaistra
Call set_bssid() with the correct port_num now. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-17-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in bss_info_changed()Martin Kaistra
Call set_linktype and set_bssid now with correct port_num. Call stop_tx_beacon only for port 0, as we don't support beacons on port 1. Explicit changes to BEACON will only happen for AP type interfaces, so we don't need an additional check there. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-16-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in {add,remove}_interface()Martin Kaistra
Add a custom struct to store in vif->drv_priv with a reference to port_num and fill it when a new interface is added. Choose a free port_num for the newly added interface. As we only want to support AP mode/sending beacons on port 0, only change the beacon settings if a new interface is actually assigned to port 0. Call set_linktype() and set_mac() with the appropriate port_num. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-15-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in watchdog_callback()Martin Kaistra
Check first whether priv->vifs[0] exists and is of type STATION, then go to priv->vifs[1]. Make sure to call refresh_rate_mask for both interfaces. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-14-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in configure_filter()Martin Kaistra
As we only want to support AP mode/sending beacons on port 0, change from priv->vif to priv->vifs[0] in the check for AP mode. Additionally, if we are in AP mode, don't filter RX beacon and probe response frames to still allow working STATION mode on the other interface. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-13-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in update_beacon_work_callback()Martin Kaistra
As we only want to support AP mode/sending beacons on port 0, it is enough to replace priv->vif with priv->vifs[0]. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-12-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in set_aifs()Martin Kaistra
In concurrent mode supported by this driver, both interfaces will use the same channel and same wireless mode. It is therefore possible to get the wireless mode by checking the first connected interface. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-11-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support setting bssid register for multiple interfacesMartin Kaistra
To prepare for concurrent mode, enhance rtl8xxxu_set_bssid() to write the BSSID of the respective interface to REG_BSSID or REG_BSSID1. Like done with rtl8xxxu_set_mac(), call rtl8xxxu_set_bssid() with port_num = 0, until the callers also support multiple interfaces. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-10-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: don't parse CFO, if both interfaces are connected in STA modeMartin Kaistra
If both interfaces are in STATION mode and both are connected to an AP, there might be conflicting CFO values for the two connections. Ignore the CFO information in this case. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-9-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: extend check for matching bssid to both interfacesMartin Kaistra
The driver will support two interfaces soon, which both can be in station mode, so extend the check, whether cfo information should be parsed, to cover both interfaces. For better code readability put the lines with priv->vifs[port_num] in a separate function. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-8-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: extend wifi connected check to both interfacesMartin Kaistra
There are multiple places in the code where the current connection status of wifi is checked. The driver will support two interfaces soon and either one of them (or both) could be connected. Convert all uses of (vif && vif->cfg.assoc) to a new helper function rtl8xxxu_is_assoc() which checks both interfaces. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-7-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support setting mac address register for both interfacesMartin Kaistra
To prepare for concurrent mode, enhance rtl8xxxu_set_mac() to write the mac address of the respective interface to REG_MACID or REG_MACID1. Remove the call to rtl8xxxu_set_mac() from the init function as we set it in rtl8xxxu_add_interface() later anyway. Until rtl8xxxu_add_interface() can handle both interfaces, call rtl8xxxu_set_mac() with port_num = 0. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-6-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: 8188e: convert usage of priv->vif to priv->vifs[0]Martin Kaistra
The driver currently does not support AP or concurrent mode for 8188e, so just use priv->vifs[0] instead of priv->vif for now. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-5-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support setting linktype for both interfacesMartin Kaistra
To prepare for concurrent mode, enhance the set_linktype function to be able to set the linktype in the MSR register for both hardware ports. Until the users of set_linktype can handle multiple interfaces, use port_num = 0. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-4-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: prepare supporting two virtual interfacesMartin Kaistra
To prepare for concurrent mode, add an array ("vifs") to rtl8xxxu_priv to keep track of both interfaces. Keep the old priv->vif as long there are still users of it and let priv->vifs[0] point to the same location. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-3-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: remove assignment of priv->vif in rtl8xxxu_bss_info_changed()Martin Kaistra
priv->vif gets already set in rtl8xxxu_add_interface, there is no need to set it also in rtl8xxxu_bss_info_changed(). Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-2-martin.kaistra@linutronix.de
2024-01-10wifi: rtw88: 8822ce: refine power parameters for RFE type 5Ping-Ke Shih
Refine the power parameters for better step response especially at high current ramp case that is caused by power inductor variation. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103070155.119488-1-pkshih@realtek.com
2024-01-10wifi: rtw89: mac: Fix spelling mistakes "notfify" -> "notify"Colin Ian King
There are two spelling mistakes in rtw89_err error messages. Fix these and also add space between [ERR] and message text. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231220141831.10063-1-colin.i.king@gmail.com
2024-01-10wifi: rtw89: phy: set channel_info for WiFi 7 chipsPing-Ke Shih
The channel_info is hardware settings to reflect operational status, such as scale factor, report unit, buffer matrix size, RU size and so on. Then, we can get desired reports to do further tuning. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064440.36926-1-pkshih@realtek.com
2024-01-10wifi: rtw89: phy: add BB wrapper of TX power for WiFi 7 chipsPing-Ke Shih
TX power is controlled by BB layer basically, but it should interact with MAC layer, so these registers are put on MAC register domain and called BB wrapper, which contains TX power for each MAC ID, OFDMA RU power, and consideration of power type table. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064433.36870-1-pkshih@realtek.com
2024-01-10wifi: rtw89: 8922a: add NCTL pre-settings for WiFi 7 chipsPing-Ke Shih
NCTL standing for nano-controller is used to assist RF calibration. Basically, we write settings from a table, but format of the table can't describe register mask and additional conditions, so add a function to set this kind of settings. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064422.36812-1-pkshih@realtek.com
2024-01-10wifi: rtw89: phy: ignore special data from BB parameter filePing-Ke Shih
BB parameter file is a list of tuple {addr, val} with conditional hardware version. However, tuples within a condition can't be empty, so insert a special dummy tuple for this case. Then, ignore this tuple when writing. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064407.36750-1-pkshih@realtek.com
2024-01-10wifi: rtw89: 8922a: update the register used in DIG and the DIG flowCheng-Chieh Hsieh
DIG standing for dynamic initial gain that is used to adjust RX coverage, and PD lower threshold is packet detection power level by received signal strength to avoid false detection of the WiFi packet. Because of the hardware is different between WiFi 7 and 6 ICs, we adjust flow and add register definition for 8922A. Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-5-pkshih@realtek.com
2024-01-10wifi: rtw89: 8922a: set RX gain along with set_channel operationChung-Hsuan Hung
Set values of LNA, TIA and RPL gain compensation read from firmware file when channel is changed. Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-4-pkshih@realtek.com
2024-01-10wifi: rtw89: phy: add parser to support RX gain dynamic setting flowChung-Hsuan Hung
Add RX gain offset dynamic setting flow according to different bands and bandwidths. RX gain offset values will be different according to different channel bands, therefore, this dynamic mechanism is needed while channel is changed. Add this to parse data from the element of firmware file, and then we can use them easier at runtime. Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-3-pkshih@realtek.com
2024-01-10wifi: rtw89: phy: move bb_gain_info used by WiFi 6 chips to unionPing-Ke Shih
WiFi 7 chips use different bb_gain_info struct, so move existing struct to a union in advance. This doesn't change logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-2-pkshih@realtek.com
2024-01-10wifi: rtw89: 8851b: update TX power tables to R37Zong-Zhe Yang
Update TX power tables to RF version R37. Mainly update configurations for Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103014114.9558-2-pkshih@realtek.com
2024-01-10wifi: rtw89: 8852b: update TX power tables to R36Zong-Zhe Yang
Update TX power tables to RF version R36. Mainly update configurations for Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103014114.9558-1-pkshih@realtek.com
2024-01-10wifi: rtw89: pci: use DBI function for 8852AE/8852BE/8851BEChin-Yen Lee
Sometimes driver can't use kernel API pci_read/write_config_byte to access the PCI config space of above address 0x100 due to the negotiated PCI setting. 8852AE/8852BE/8851BE provide another way called DBI function, which belongs to WiFi mac and could access all PCI config space for this case. Link: https://lore.kernel.org/linux-wireless/79fe81b7db7148b9a7da2353c16d70fb@realtek.com/T/#t Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103012346.6822-1-pkshih@realtek.com
2024-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()") 0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL") https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04USB: core: Use device_driver directly in struct usb_driver and usb_device_driverYajun Deng
There is usbdrv_wrap in struct usb_driver and usb_device_driver, it contains device_driver and for_devices. for_devices is used to distinguish between device drivers and interface drivers. Like the is_usb_device(), it tests the type of the device. We can test that if the probe of device_driver is equal to usb_probe_device in is_usb_device_driver(), and then the struct usbdrv_wrap is no longer needed. Clean up struct usbdrv_wrap, use device_driver directly in struct usb_driver and usb_device_driver. This makes the code cleaner. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20240104032822.1896596-1-yajun.deng@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-02Merge tag 'wireless-next-2023-12-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The third "new features" pull request for v6.8. This is a smaller one to clear up our tree before the break and nothing really noteworthy this time. Major changes: stack * cfg80211: introduce cfg80211_ssid_eq() for SSID matching * cfg80211: support P2P operation on DFS channels * mac80211: allow 64-bit radiotap timestamps iwlwifi * AX210: allow concurrent P2P operation on DFS channels ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-26PCI: Remove unused 'node' member from struct pci_driverMathias Krause
Remove the unused 'node' member. It got replaced by device_driver chaining more than 20 years ago in commit 4b4a837f2b57 ("PCI: start to use common fields of struct device_driver more...") of the history.git tree. Link: https://lore.kernel.org/r/20231220133505.8798-1-minipli@grsecurity.net Signed-off-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@kernel.org>
2023-12-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21wifi: iwlwifi: replace ENOTSUPP with EOPNOTSUPPAndrei Otcheretianski
ENOTSUPP isn't a standard error code, don't use it. Replace with EOPNOTSUPP instead. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.a69f4347b5f8.I88429d5de8251287ec0b58ff26a588465b9049a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: use the new command to clear the internal bufferEmmanuel Grumbach
The firmware can allow to clear the internal debug buffer. This can be used to sanitize the data when requested to. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.99aed3efbacb.Ib5bda1d1ff4bae476667737d4081ad066d1d7e6b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: disallow puncturing in US/CanadaJohannes Berg
For now, this isn't allowed. The API to mac80211 isn't great for this, but we need to change the API to move puncturing into the chanctx/chandef, and will do it better then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.38955b68b429.I0c4ae99179b271648a747a51eb04853504c7952c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: add US/Canada MCC to APIJohannes Berg
We don't want to duplicate the definitions later, so add them to the API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.6595e905997b.I12354d31676911b29ab30c81a4e9b87f59284d3b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: Add rf_mapping of new wifi7 devicesMukesh Sisodiya
Add the CSR register details for new wifi7 devices and correctly set rf_name for devices with FM and WP radios. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.a9c04b1e9d13.Ibf258d5e6370d8840a2560282988a1c26377c410@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: cleanup BT Shared Single Antenna codeMiri Korenblit
We don't support such device. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.6e6961ac0ac5.I923024eac20efd24a5b42332d8e73ae756e0469a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: assign phy_ctxt before eSR activationMiri Korenblit
eSR is activated when a chanctx is assigned to more than one link. During eSR activation we should disable RLC for both phys, and configure the FW with a special phy command for both phys. Currently we assign the phy_ctxt to the link only after eSR activation, so RLC is not disabled for the new phy_ctxt, and a cmd is not sent to FW. Fix this by first assigning the new phy_ctxt to the link and then doing the eSR activation. Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.3d94507f5d9a.I537fcd73aedf94c7348c03157e486f24301fef14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 09:59:38 +0000