summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2023-12-21wifi: iwlwifi: fix out of bound copy_from_userAnjaneyulu
The driver copies the userspace buffer into an internal NUL byte terminated buffer. While doing so, it was reading beyond the end of the userspace buffer, overwriting its own NUL termination in the process. Fix this by only copying the correct number of bytes. Fixes: 3f244876ef73 ("wifi: iwlwifi: make debugfs entries link specific") Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.e4913deb2ad4.Idcf6a7e909ff4b7801cd49c2f691f84a2f68eff9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: Do not warn if valid link pair was not foundIlan Peer
It is possible that though multiple links are enabled we cannot enabled EMLSR enable more than a single link, e.g., all valid links are on the same band etc. Thus, do not warn in case no valid link pair is found. Fixes: b9be67fb4207 ("wifi: iwlwifi: mvm: Add basic link selection logic") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.142e57a05230.I7cfe78c94c3d15c4c744bccadd8f187e43594932@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: d3: avoid intermediate/early mutex unlockJohannes Berg
Now with the mac80211 locking model changed, we no longer can cause any bad dependencies here between mvm->mutex and other mutexes in mac80211, so we no longer need to drop the mutex early or even temporarily. Clean this up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.1f2f5289ecc6.I7e3b8e806b6d50e88ba0c26767da8261806eb9c7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: send TX path flush in rfkillJohannes Berg
If we want to drop packets, that's surely a good thing to do when we want to enter rfkill. Send this command despite rfkill so we can successfully clean up everything, we need to handle it separately since it has CMD_WANT_SKB, so it's not going to automatically return success when in rfkill. Fixes: d4e3a341b87b ("iwlwifi: mvm: add support for new flush queue response") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.c528a6fa6cec.Ibe5e9560359ccc0fba60c35e01de285c376748a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: Don't mark DFS channels as NO-IRAndrei Otcheretianski
The NVM_CHANNEL_ACTIVE bit means that active scanning/beaconing is allowed, however it's not an exact opposite of IEEE80211_CHAN_NO_IR. For example, NVM_CHANNEL_ACTIVE bit is not set on DFS channels, while cfg80211 doesn't really expect NO-IR on DFS channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.94cd9b96a532.Ifb0e8d8a6a6384493758f26b811d58432536101a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: Allow DFS concurrent operationAndrei Otcheretianski
AX210 devices allow concurrent P2P operation on DFS channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.dc39b33bf507.I04dfda24d73091fb75701279d10ac400314de488@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: iwlwifi: mvm: set siso/mimo chains to 1 in FW SMPS requestJohannes Berg
The firmware changed their mind, don't set the chains to zero, instead set them to 1 as we normally would for connections to APs that don't use MIMO. Fixes: 2a7ce54ccc23 ("iwlwifi: mvm: honour firmware SMPS requests") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231219215605.7f031f1a127f.Idc816e0f604b07d22a9d5352bc23c445512fad14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211: rework RX timestamp flagsJohannes Berg
We only have a single flag free, and before using that for another mactime flag, instead refactor the mactime flags to use a 2-bit field. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Reviewed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.d0e664832d14.I20c8900106f9bf81316bed778b1e3ce145785274@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211_hwsim: Add custom reg for DFS concurrentAndrei Otcheretianski
Add custom regulatory that marks DFS channels as DFS_CONCURRENT. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231220133549.4b08a6530fa3.Ic285ca7a4728e77a4bea1394a6a52cf286fbea22@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mac80211_hwsim: support HE 40 MHz in 2.4 GHz bandMiri Korenblit
We are missing the flag that indicates that capability of 40 MHz bandwidth support in HE on the LB. Add it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20231220075830.4f10c6b64d1a.I1ba6905c806be6e0548ed15130c0bbb2ee04c9fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21wifi: mwifiex: fix uninitialized firmware_statDavid Lin
Variable firmware_stat is possible to be used without initialization. Signed-off-by: David Lin <yu-hao.lin@nxp.com> Fixes: 1c5d463c0770 ("wifi: mwifiex: add extra delay for firmware ready") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202312192236.ZflaWYCw-lkp@intel.com/ Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231221015511.1032128-1-yu-hao.lin@nxp.com
2023-12-21wifi: rtlwifi: rtl8723{be,ae}: using calculate_bit_shift()Su Hui
Using calculate_bit_shift() to replace rtl8723_phy_calculate_bit_shift(). And fix an undefined bitwise shift behavior problem. Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-12-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8723_common: using calculate_bit_shift()Su Hui
Using calculate_bit_shift() to replace rtl8723_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 0a168b48cdf7 ("rtlwifi: rtl8723ae: rtl8723-common: Create new driver for common code") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-11-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192se: using calculate_bit_shift()Su Hui
Using calculate_bit_shift() to replace _rtl92s_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: d15853163bea ("rtlwifi: rtl8192se: Merge phy routines") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-10-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192ee: using calculate_bit_shift()Su Hui
Using calculate_bit_shift() to replace _rtl92ee_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: b1a3bfc97cd9 ("rtlwifi: rtl8192ee: Move driver from staging to the regular tree") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-9-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192de: using calculate_bit_shift()Su Hui
Using calculate_bit_shift() to replace _rtl92d_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-8-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192ce: using calculate_bit_shift()Su Hui
Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-7-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192cu: using calculate_bit_shift()Su Hui
Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix an undefined bitwise shift behavior problem. Fixes: f0a39ae738d6 ("rtlwifi: rtl8192cu: Add routine phy") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-6-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8192c: using calculate_bit_shift()Su Hui
Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 4295cd254af3 ("rtlwifi: Move common parts of rtl8192ce/phy.c") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-5-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8188ee: phy: using calculate_bit_shift()Su Hui
Using calculate_bit_shift() to replace _rtl88e_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: f0eb856e0b6c ("rtlwifi: rtl8188ee: Add new driver") Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-4-suhui@nfschina.com
2023-12-21wifi: rtlwifi: rtl8821ae: phy: using calculate_bit_shift()Su Hui
using calculate_bit_shift() to replace _rtl8821ae_phy_calculate_bit_shift(). Signed-off-by: Su Hui <suhui@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-3-suhui@nfschina.com
2023-12-21wifi: rtlwifi: add calculate_bit_shift()Su Hui
There are many same functions like _rtl88e_phy_calculate_bit_shift(), _rtl92c_phy_calculate_bit_shift() and so on. And these functions can cause undefined bitwise shift behavior. Add calculate_bit_shift() to replace them and fix undefined behavior in subsequent patches. Signed-off-by: Su Hui <suhui@nfschina.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231219065739.1895666-2-suhui@nfschina.com
2023-12-20wifi: ath12k: Make QMI message rules constJeff Johnson
Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-20wifi: rtw89: coex: To improve Wi-Fi performance while BT is idleChing-Te Ku
Because some platform Bluetooth will have many background scan when idle. And the frequently Bluetooth scan will break Wi-Fi traffic many times at a short duration, it will make Wi-Fi throughput become lower. This patch will shorter Bluetooth slot and adjust priority settings, make Wi-Fi can have a more completed duration to do traffic. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-12-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Translate antenna configuration from ID to stringChing-Te Ku
More readable on the coexistence log. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-11-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Update RF parameter control setting logicChing-Te Ku
Coexistence will set the RF parameter according to Wi-Fi link mode, Wi-Fi/Bluetooth signal level, traffic direction, antenna type, and is there Bluetooth connection exist or not. Bluetooth will notify the current LNA level by scoreboard. If the setting not as expected, coexistence will try to assign the correct level. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-10-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Add Bluetooth RSSI level informationChing-Te Ku
In order to control RF LNA setting, need Bluetooth RSSI level information. RSSI level separate Bluetooth RSSI to several level, so the mechanism can assign a corresponding setting. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-9-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Set Bluetooth scan low-priority when Wi-Fi link/scanChing-Te Ku
To avoid Bluetooth reconnecting/pairing fail during Wi-Fi is link/scan, especially the Bluetooth connect event after the platform restart/boot up. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-8-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Update coexistence policy for Wi-Fi LPSChing-Te Ku
Including Wi-Fi RF mode to judge is Wi-Fi RF still on or off, if Wi-Fi is RF off should set scoreboard to let Bluetooth know Wi-Fi has gone. Every time the Wi-Fi radio state changed firmware should force execute refresh the TDMA coexistence mechanism to prevent incorrect mechanism runs at mismatch state. The coexistence antenna/TDMA settings should consider what the Wi-Fi mode it is now, this can help to solve some LPS transient state issue like A2DP slightly glitch. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-7-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Still show hardware grant signal info even Wi-Fi is PSChing-Te Ku
This can help to debug the grant signal and antenna path control issue during Wi-Fi power saving mode. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-6-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Update BTG control related logicChing-Te Ku
BTG is a RF system type, it means Wi-Fi 2.4GHz and Bluetooth share RF gain and antenna. The RF gain must control by Wi-Fi or Bluetooth in single side. For example, if Bluetooth RX a very strong signal, then Bluetooth will adjust to a lower gain. And Wi-Fi will also use the same gain to do RX, then maybe the gain will not enough. This BTG control mechanism can do some refine to this situation. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-5-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Add Pre-AGC control to enhance Wi-Fi RX performanceChing-Te Ku
Pre-AGC(Auto gain control) is a hardware mechanism, it will auto adjust the RX gain for every packet, it can help to keep Wi-Fi signal on a well RX quality. The coexistence will give advice to control the API and monitor the settings by firmware report. Also add function to check register, these registers were monitoring by Wi-Fi firmware and report to coexistence driver periodically. This can help to track whether these settings were taking effect or not. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-4-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Record down Wi-Fi initial mode informationChing-Te Ku
This information will use as judgment about how to set RF/HW parameters. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-3-pkshih@realtek.com
2023-12-20wifi: rtw89: coex: Fix wrong Wi-Fi role info and FDDT parameter membersChing-Te Ku
The Wi-Fi firmware 29.29.X should use version 2 role info format. FDDT mechanism version 5 use the same cell members to judge traffic situation, don't need to add another new format. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231218061341.51255-2-pkshih@realtek.com
2023-12-19wifi: rtw88: use cfg80211_ssid_eq() instead of rtw_ssid_equal()Dmitry Antipov
Prefer generic 'cfg80211_ssid_eq()' over dropped 'rtw_ssid_equal()'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20231215123859.196350-3-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-19wifi: mwifiex: use cfg80211_ssid_eq() instead of mwifiex_ssid_cmp()Dmitry Antipov
Prefer generic 'cfg80211_ssid_eq()' over dropped 'mwifiex_ssid_cmp()'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20231215123859.196350-2-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-19wifi: rtl8xxxu: Add additional USB IDs for RTL8192EU devicesZenm Chen
Add additional USB IDs found in the vendor driver from https://github.com/Mange/rtl8192eu-linux-driver to support more RTL8192EU devices. Signed-off-by: Zenm Chen <zenmchen@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231217123017.1982-1-zenmchen@gmail.com
2023-12-19wifi: rtw89: mac: implement to configure TX/RX engines for WiFi 7 chipsPing-Ke Shih
After enabling DMAC and CMAC, configure detail registers one by one. DMAC includes DLE (data link engine), packet preload engine, HFC (HCI flow control) for DMA channels, security egine and etc. CMAC includes scheduler, address CAM, RX filter, CCA control and etc. The SER IMR is to configure to help SER. When hardware TX/RX get abnormal, it raises an interrupt to firmware to determine if send C2H events to notify driver to reset PCI bus or call ieee80211_restart_hw(). Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231216045739.10432-3-pkshih@realtek.com
2023-12-19wifi: rtw89: mac: add sys_init and filter option for WiFi 7 chipsPing-Ke Shih
The sys_init is to enable hardware function block of DMAC (data-path MAC), CMAC (control-path MAC) and others called 'chip_func'. To understand the functionality of this function, we keep some functions as empty. The other is typ_fltr_opt that is to configure filter option to decide whether RX packets engine can forward packets to host or WiFi CPU. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231216045739.10432-2-pkshih@realtek.com
2023-12-18Merge tag 'wireless-next-2023-12-18' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The second features pull request for v6.8. A bigger one this time with changes both to stack and drivers. We have a new Wifi band RFI (WBRF) mitigation feature for which we pulled an immutable branch shared with other subsystems. And, as always, other new features and bug fixes all over. Major changes: cfg80211/mac80211 * AMD ACPI based Wifi band RFI (WBRF) mitigation feature * Basic Service Set (BSS) usage reporting * TID to link mapping support * mac80211 hardware flag to disallow puncturing iwlwifi * new debugfs file fw_dbg_clear mt76 * NVMEM EEPROM improvements * mt7996 Extremely High Throughpu (EHT) improvements * mt7996 Wireless Ethernet Dispatcher (WED) support * mt7996 36-bit DMA support ath12k * support one MSI vector * WCN7850: support AP mode * tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings wifi: ath11k: workaround too long expansion sparse warnings Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ" wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor() wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up wifi: rtw89: add DBCC H2C to notify firmware the status wifi: rtw89: mac: add suffix _ax to MAC functions wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled wifi: rtw89: 8922a: add power on/off functions wifi: rtw89: add XTAL SI for WiFi 7 chips wifi: rtw89: phy: print out RFK log with formatted string wifi: rtw89: parse and print out RFK log from C2H events wifi: rtw89: add C2H event handlers of RFK log and report wifi: rtw89: load RFK log format string from firmware file wifi: rtw89: fw: add version field to BB MCU firmware element wifi: rtw89: fw: load TX power track tables from fw_element wifi: mwifiex: configure BSSID consistently when starting AP wifi: mwifiex: add extra delay for firmware ready wifi: mac80211: sta_info.c: fix sentence grammar wifi: mac80211: rx.c: fix sentence grammar ... ==================== Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18wifi: ath12k: support default regdb while searching board-2.bin for WCN7850Baochen Qiang
Sometimes board-2.bin does not have the regdb data which matches the parameters such as vendor, device, subsystem-vendor, subsystem-device etc. Add default regdb data with only 'bus=%s' into board-2.bin for WCN7850, then ath12k uses 'bus=pci' to search regdb data in board-2.bin for WCN7850. [ 46.114895] ath12k_pci 0000:03:00.0: boot using board name 'bus=pci,vendor=17cb,device=1107,subsystem-vendor=17cb,subsystem-device=3378,qmi-chip-id=2,qmi-board-id=260' [ 46.118167] ath12k_pci 0000:03:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 380280 [ 46.118173] ath12k_pci 0000:03:00.0: board name [ 46.118176] ath12k_pci 0000:03:00.0: 00000000: 62 75 73 3d 70 63 69 bus=pci [ 46.118179] ath12k_pci 0000:03:00.0: failed to fetch regdb data for bus=pci,vendor=17cb,device=1107,subsystem-vendor=17cb,subsystem-device=3378,qmi-chip-id=2,qmi-board-id=260 from ath12k/WCN7850/hw2.0/board-2.bin [ 46.118239] ath12k_pci 0000:03:00.0: boot using board name 'bus=pci' [ 46.119842] ath12k_pci 0000:03:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 380280 [ 46.119847] ath12k_pci 0000:03:00.0: board name [ 46.119849] ath12k_pci 0000:03:00.0: 00000000: 62 75 73 3d 70 63 69 bus=pci [ 46.119852] ath12k_pci 0000:03:00.0: boot found match regdb data for name 'bus=pci' [ 46.119855] ath12k_pci 0000:03:00.0: boot found regdb data for 'bus=pci' [ 46.119857] ath12k_pci 0000:03:00.0: fetched regdb Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231216060140.30611-6-quic_bqiang@quicinc.com
2023-12-18wifi: ath12k: add support to search regdb data in board-2.bin for WCN7850Wen Gong
Currently ath12k only downloads the same regdb.bin file for all WCN7850 chips, actually ath12k needs to distinguish all different WCN7850 chips. This is to re-use the string type which includes bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN7850 to distinguish different regdb in board-2.bin. ath12k will first load board-2.bin and search in it for the regdb data with the above parameters. If matched with one regdb data, download it to firmware. And if not, download regdb.bin instead. Add enum value ATH12K_BD_IE_REGDB and enum type ath12k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. Test log: [ 3833.091948] ath12k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath12k_pci 0000:05:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 205316 [ 3833.092079] ath12k_pci 0000:05:00.0: board name [ 3833.092083] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath12k_pci 0000:05:00.0: board name [ 3833.092095] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath12k_pci 0000:05:00.0: board name [ 3833.092105] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath12k_pci 0000:05:00.0: board name [ 3833.092116] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath12k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath12k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath12k_pci 0000:05:00.0: board name [ 3833.092150] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath12k_pci 0000:05:00.0: board name [ 3833.092209] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath12k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath12k_pci 0000:05:00.0: board name [ 3833.092241] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath12k_pci 0000:05:00.0: board name [ 3833.092251] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath12k_pci 0000:05:00.0: board name [ 3833.092261] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath12k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath12k_pci 0000:05:00.0: fetched regdb Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231216060140.30611-5-quic_bqiang@quicinc.com
2023-12-18wifi: ath12k: remove unused ATH12K_BD_IE_BOARD_EXTWen Gong
Currently ATH12K_BD_IE_BOARD_EXT is not used, so remove it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231216060140.30611-4-quic_bqiang@quicinc.com
2023-12-18wifi: ath12k: add fallback board name without variant while searching ↵Wen Gong
board-2.bin Currently a variant value read from DT or SMBIOS is considered while searching board-2.bin, this may fail because not all board-2.bin files contains that symbol. Add fallback board name which removes variant value and searches again in board-2.bin when fails to increase boot up success rate. dmesg log after this patch: [169547.248472] ath12k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test' [169547.248565] ath12k_pci 0000:05:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 180324 [169547.248568] ath12k_pci 0000:05:00.0: board name [169547.248570] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248571] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248572] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248574] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248575] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248576] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248577] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248578] ath12k_pci 0000:05:00.0: board name [169547.248579] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248581] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248582] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248583] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248584] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248585] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248587] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [169547.248588] ath12k_pci 0000:05:00.0: board name [169547.248589] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248590] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248591] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248592] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248594] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248595] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 31 38 2c 71 6d 69 2d 62 chip-id=18,qmi-b [169547.248596] ath12k_pci 0000:05:00.0: 00000060: 6f 61 72 64 2d 69 64 3d 32 36 36 oard-id=266 [169547.248597] ath12k_pci 0000:05:00.0: failed to fetch board data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262,variant=test from ath12k/WCN7850/hw2.0/board-2.bin [169547.248476] ath12k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248634] ath12k_pci 0000:05:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 180324 [169547.248636] ath12k_pci 0000:05:00.0: board name [169547.248637] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [169547.248638] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [169547.248639] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [169547.248641] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [169547.248642] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [169547.248643] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [169547.248645] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [169547.248646] ath12k_pci 0000:05:00.0: boot found match for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248647] ath12k_pci 0000:05:00.0: boot found board data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [169547.248649] ath12k_pci 0000:05:00.0: using board api 2 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231216060140.30611-3-quic_bqiang@quicinc.com
2023-12-18wifi: ath12k: add string type to search board data in board-2.bin for WCN7850Wen Gong
Currently ath12k only supports string type with bus, chip id and board id such as "bus=ahb,qmi-chip-id=1,qmi-board-id=4" for AHB bus chip and "bus=pci,qmi-chip-id=0,qmi-board-id=255" for PCI bus chip in board-2.bin. For WCN7850, it is not enough to distinguish all different chips. Add a new string type which includes bus, chip id, board id, vendor, device, subsystem-vendor and subsystem-device for WCN7850. ath12k will first load board-2.bin and searches in it for the board data with the above parameters. If matched with one board data, ath12k downloads it to firmware. And if not, downloads board.bin instead. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231216060140.30611-2-quic_bqiang@quicinc.com
2023-12-18wifi: ath10k: remove duplicate memset() in 10.4 TDLS peer updateJeff Johnson
In [1] it was identified that in ath10k_wmi_10_4_gen_tdls_peer_update() the memset(skb->data, 0, sizeof(*cmd)) is unnecessary since function ath10k_wmi_alloc_skb() already zeroes skb->data, so remove it. No functional changes, compile tested only. [1] https://lore.kernel.org/linux-wireless/626ae2e7-66f8-423b-b17f-e75c1a6d29b3@embeddedor.com/ Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-6-92922d92fa2c@quicinc.com
2023-12-18wifi: ath10k: use flexible array in struct wmi_tdls_peer_capabilitiesJeff Johnson
Currently struct wmi_tdls_peer_capabilities defines: struct wmi_channel peer_chan_list[1]; Per the guidance in [1] this should be a flexible array, and at one point Gustavo was trying to fix this [2], but had questions about the correct behavior when the associated peer_chan_len is 0. I have been unable to determine if firmware requires that at least one record be present even if peer_chan_len is 0. But since that is the current behavior, follow the example from [3] and replace the one-element array with a union that contains both a flexible array and a single instance of the array element. This results in a struct that has the same footprint as the original, so no other driver changes are required. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays [2] https://lore.kernel.org/linux-wireless/626ae2e7-66f8-423b-b17f-e75c1a6d29b3@embeddedor.com/ [3] https://lore.kernel.org/linux-wireless/202308301529.AC90A9EF98@keescook/ Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-5-92922d92fa2c@quicinc.com
2023-12-18wifi: ath10k: remove unused template structsJeff Johnson
Currently both the wmi_bcn_tmpl_cmd and wmi_prb_tmpl_cmd structs define: u8 data[1]; Per the guidance in [1] both instances of this should be flexible arrays. However during conversion it was discovered that neither of these structs are actually used, so just remove them. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-4-92922d92fa2c@quicinc.com
2023-12-18wifi: ath10k: remove struct wmi_pdev_chanlist_update_eventJeff Johnson
Currently struct wmi_pdev_chanlist_update_event defines: struct wmi_channel channel_list[1]; Per the guidance in [1] this should be a flexible array. However during conversion it was discovered that this struct is not used, so just remove the entire struct. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-3-92922d92fa2c@quicinc.com
2023-12-18wifi: ath10k: use flexible arrays for WMI start scan TLVsJeff Johnson
Currently ath10k defines the following struct: struct wmi_start_scan_tlvs { u8 tlvs[0]; } __packed; Per the guidance in [1] this should be a flexible array. However, a direct replace to u8 tlvs[] results in the compilation error: flexible array member in a struct with no named members This is because C99 6.7.2.1 (16) requires that a structure containing a flexible array member must have more than one named member. So rather than defining a separate struct wmi_start_scan_tlvs which contains the flexible tlvs[] array, just define the tlvs[] array where struct wmi_start_scan_tlvs is being used. No functional changes, compile tested only. [1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-2-92922d92fa2c@quicinc.com
generated by cgit (git 2.34.1) at 2025-09-13 11:58:20 +0000