summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2018-01-08brcmfmac: More efficient and slightly easier to read fixup for 4339 chipsArend Van Spriel
Its more efficient to test the register we're interested in first, potentially avoiding two more comparisons, and therefore always avoiding one comparison per call on all other chips. Signed-off-by: Ian Molton <ian@mnementh.co.uk> [arend: fix some checkpatch warnings] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: Remove func0 from function arrayIan Molton
func0 is not provided by the mmc stack as a function when probing. Instead providing specific access functions to read/write it. This prepares for a patch to remove the actual array entry itself. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [arend: rephrased the commit message] [arend: removed unrelated comment for which separate patch is warranted] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: Correctly handle accesses to SDIO func0Ian Molton
Rather than workaround the restrictions on func0 addressing in the driver, set MMC_QUIRK_LENIENT_FN0 Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: stabilise the value of ->sbwad in use for some xfer routines.Ian Molton
The IO functions operate within the Chipcommon IO window. Explicitly set this, rather than relying on the last initialisation IO access to leave it set to the right value by chance. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: Rename buscore to core for consistencyArend Van Spriel
Avoid confusion with unrelated _buscore labels. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [arend: only do the rename] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08brcmfmac: Remove {r,w}_sdreg32Ian Molton
Remove yet another IO function from the code and replace with one that already exists. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> [arend: keep address calculation, ie. (base + offset) in one line] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: fill FW version and subversionPing-Ke Shih
This commit fills FW version information of RTL8188EE and RTL8723, so the btcoex can cooperate with FW correctly. Also, we can display this version in debugfs. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: btcoex: Use seq_file to dump btcoex statusPing-Ke Shih
We use seq_file to replace RT_TRACE to dump status, then we can use 'cat' to access btcoex's status through debugfs. (i.e. /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/btcoex) Other related changes are 1. implement btc_disp_dbg_msg() to access btcoex's common status. 2. remove obsolete field bt_exist Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: Improve debugging by using debugfsPing-Ke Shih
Use debugfs to dump register and btcoex status, and also write registers and h2c. We create topdir in /sys/kernel/debug/rtlwifi/, and use the MAC address as subdirectory with several entries to dump mac_reg, bb_reg, rf_reg etc. An example is /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/mac_0 This change permits examination of device registers in a dynamic manner, a feature not available with the current debug mechanism. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: rtl8723: Add error handling to no existing firmwarePing-Ke Shih
Without firmware, driver wastes time to download and wait for MCU bootup, and then kernel core dump finally. If request_firmware fails, the value max_fw_size=0 is set, so we check the value before downloading firmware. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: Remove unnecessary parenthesesFrank A. Cancio Bello
This is merged by Ping-Ke Shih from commit a221cb0911b8 ("staging: rtlwifi: Remove unnecessary parentheses"), and original commit log is reserved below. Remove unnecessary parentheses to comply with preferred coding style for the linux kernel and avoid the following checkpatch's message: 'CHECK: Unnecessary parentheses around'. Credits to checkpatch. Signed-off-by: Frank A. Cancio Bello <frank@generalsoftwareinc.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: mark expected switch fall-through in rtl_make_smps_actionGustavo A. R. Silva
This is merged by Ping-Ke Shih from commit 640019bba419 ("staging: rtlwifi: mark expected switch fall-through in rtl_make_smps_action"), and original commit log is reserved below. In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: Remove unnecessary 'out of memory' messageShreeya Patel
This is merged by Ping-Ke Shih from commit 596e0559d61a ("Staging: rtlwifi: Remove unnecessary 'out of memory' message."), and commit log is reserved below. Logging messages that show some type of "out of memory" error are generally unnecessary as there is a generic message and a stack dump done by the memory subsystem. These messages generally increase kernel size without much added value. Problem found by checkpatch. Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: use kcalloc instead of multiplyTobin C. Harding
This is merged by Ping-Ke Shih from commit 85d309d53f7a ("staging: rtlwifi: use kcalloc instead of multiply"), and original commit log is reserved below. checkpatch emits multiple warnings of type WARNING:ALLOC_WITH_MULTIPLY: Prefer kcalloc over kzalloc with multiply Replace two calls to kzalloc() with calls to kcalloc(). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: fix parenthesis alignmentPing-Ke Shih
This is merged by Ping-Ke Shih from commit 688a0206cfb8 ("staging: rtlwifi: fix parenthesis alignment"), and original commit log is reserved below. Checkpatch emits multiple warnings of type CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis Fix parenthesis alignment in line with checkpatch suggestion. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: check for array overflowDan Carpenter
This is merged by Ping-Ke Shih from commit dc33bd4309d2 ("staging: rtlwifi: check for array overflow"), and the original commit log is reserved below. Smatch is distrustful of the "capab" value and marks it as user controlled. I think it actually comes from the firmware? Anyway, I looked at other drivers and they added a bounds check and it seems like a harmless thing to have so I have added it here as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rt2x00: Delete an error message for a failed memory allocation in ↵Markus Elfring
rt2x00queue_allocate() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-05Merge ath-current from ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 4.15. Major changes: wcn36xx * fix dynamic power save which has been broken since the driver was commited
2018-01-05iwlwifi: pcie: fix DMA memory mapping / unmappingEmmanuel Grumbach
22000 devices (previously referenced as A000) can support short transmit queues. This means that we have less DMA descriptors (TFD) for those shorter queues. Previous devices must still have 256 TFDs for each queue even if those 256 TFDs point to fewer buffers. When I introduced support for the short queues for 22000 I broke older devices by assuming that they can also have less TFDs in their queues. This led to several problems: 1) the payload of the commands weren't unmapped properly which caused the SWIOTLB to complain at some point. 2) the hardware could get confused and we get hardware crashes. The corresponding bugzilla entries are: https://bugzilla.kernel.org/show_bug.cgi?id=198201 https://bugzilla.kernel.org/show_bug.cgi?id=198265 Cc: stable@vger.kernel.org # 4.14+ Fixes: 4ecab5616023 ("iwlwifi: pcie: support short Tx queues for A000 device family") Reviewed-by: Sharon, Sara <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-04Merge tag 'mac80211-next-for-davem-2018-01-04' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== We have things all over the place, no point listing them. One thing is notable: I applied two patches and later reverted them - we'll get back to that once all the driver situation is sorted out. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-04wcn36xx: Fix dynamic power savingLoic Poulain
Since driver does not report hardware dynamic power saving cap, this is up to the mac80211 to manage power saving timeout and state machine, using the ieee80211 config callback to report PS changes. This patch enables/disables PS mode according to the new configuration. Remove old behaviour enabling PS mode in a static way, this make the device unusable when power save is enabled since device is forced to PS regardless RX/TX traffic. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-12-27ath10k: update copyright yearKalle Valo
Update year for Qualcomm Atheros, Inc. copyrights. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: add memory dump support QCA988XKalle Valo
Copy two regions of registers and bigger DRAM region to the dump file. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: add memory dump support for QCA6174/QCA9377Alan Liu
Add memory dump to the firmware crash data file which is provided to user space via devcoredump interface. This makes it easier for firmware engineers to debug firmware crashes. Due to increased memory consumption the memory dump is disabled by default. To enable it make sure that bit 3 is set in coredump_mask module parameter: modprobe ath10k_core coredump_mask=0xffffffff When RAMDUMP is enabled a buffer for the dump is allocated with vmalloc during device probe. The actual memory layout is different in hardware versions and the layouts are defined in coredump.c. The memory is split to regions and, to get even finegrained control of what to copy, the region can split to smaller sections as not all registers are readable (which could cause the whole system to stall). Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com> [kvalo@qca.qualcomm.com: refactoring and cleanup] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: add coredump_mask module parameterKalle Valo
For memory dump support (it consumes quite a lot of memory) we need to control what is exactly stored to the crash dump. Add a module parameter call coredump_mask to do that. It's a bit mask of these values: enum ath10k_fw_crash_dump_type { ATH10K_FW_CRASH_DUMP_REGISTERS = 0, ATH10K_FW_CRASH_DUMP_CE_DATA = 1, ATH10K_FW_CRASH_DUMP_MAX, }; For example, if we only want to store CE_DATA we would enable bit 2: modprobe ath10k_core coredump_mask=0x2 Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: detach coredump.c from debug.cKalle Valo
Now coredump is totally separate from debug.c and doesn't depend on CONFIG_ATH10K_DEBUGFS anymore, only on CONFIG_DEV_COREDUMP. Also remove leftovers from the removed debugfs file support. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: refactor firmware crashdump code to coredump.cKalle Valo
In preparation to add RAM dump support. No functional changes, only moving code and renaming function names. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: remove deprecated fw_crash_dump debugfs fileKalle Valo
The fw_crash_dump file was deprecated by commmit 727000e6af34 ("ath10k: support dev_coredump for crash dump") in v4.11 in favor of dev_coredump interface, remove it now for good. Everyone should use dev_coredump now. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: advertise TDLS wider bandwidth support for 5GHzBalaji Pothunoori
Enable TDLS wider bandwidth support for 5GHz based on firmware wmi capabilities. This patch is required for chipset QCA9888. Tested with firmware version 10.4-3.5.1-00018. Signed-off-by: Balaji Pothunoori <bpothuno@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add fw feature flag for non-bmi firmware loadRakesh Pillai
HL1.0 firmware is not loaded via bmi. The bmi specific code should not be executed for HL1.0 Add fw feature flag for non bmi targets and skip the bmi specific code for non bmi targets. Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add debug mask for SNOC bus typeGovind Singh
WCN3990 target uses SNOC bus. Add debug mask for SNOC bus type. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add SNOC bus type for WCN3990 targetGovind Singh
WCN3990 is integrated chipset which uses system NOC. Add SNOC bus type and related definitions. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for 64 bit ce descriptorGovind Singh
WCN3990 CE descriptor uses 64bit address for src/dst ring buffer. It has extended field for toeplitz hash result, which is being used for HW assisted hash results. To accommodate WCN3990 descriptor, define new CE descriptor for extended addressing mode and related methods to handle the descriptor data. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Use dma_addr_t for ce buffers to support 64bit targetGovind Singh
CE send and receive API's are using u32 ring address, which truncates the address for target with 64bit addressing range. Use dma_addr_t for ce buffers to support target with extended addressing range. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add paddrs_ring_64 support for 64bit targetGovind Singh
paddrs_ring_64 holds the physical device address of the rx buffers that host SW provides for the MAC HW to fill. Since this field is used in rx ring setup and rx ring replenish in rx data path. Define separate methods for handling 64 bit ring paddr and attach them dynamically based on target_64bit hw param flag. Use u64 type while popping paddr from the rx hash table for 64bit target. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add hw param for rx ring size supportGovind Singh
WCN3990 uses larger ring size in comparison to existing ring size value. Add rx ring size hw param for supporting different rx ring size across multiple target. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for htt_data_tx_desc_64 descriptorGovind Singh
WCN3990 target uses 64 bit frags_paddr in htt tx descriptor, which holds the physical address of SKB fragments in tx data path. In order to support 64 bit bit frags_paddr in htt tx descriptor, define htt_data_tx_desc_64 descriptor and ath10k_htt_tx_64 method for handling tx data path with new descriptor fields. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for 64 bit HTT frag descriptorGovind Singh
WCN3990 target uses 64 bit frag descriptor and more fields in TSO flag. Add support for 64 bit HTT frag descriptor. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for 64 bit htt rx ring cfgGovind Singh
WCN3900 target uses 64bit rx_ring_base_paddr and fw_idx_shadow_reg_paddr fields in HTT rx ring cfg message. These address points to the memory region where remote ring empty buffers are allocated. In order to add 64 bit htt rx ring cfg, define separate 64 bit htt rx ring cfg message and attach it in runtime based on target_64bit hw param flag. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add support for 64 bit HTT in-order indication msgGovind Singh
WCN3990 target use 64bit msdu address in htt in-order indication message. Add support for 64 bit msdu address in HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND message. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Update rx descriptor for WCN3990 targetGovind Singh
WCN3990 rx descriptor uses different offset of msdu start, msdu end, ppdu end, rx pkt end and rx frag info. To accommodate different offsets, define respective fields in rx descriptor of WCN3990 target. Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: Add hw param for 64-bit address supportRakesh Pillai
WCN3990 target supports 37-bit addressing mode. In order to accommodate extended address support, add hw param to indicate if the target supports addressing above 32-bits. Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27wil6210: fix build warnings without CONFIG_PMArnd Bergmann
The #ifdef checks are hard to get right, in this case some functions should have been left inside a CONFIG_PM_SLEEP check as seen by this message: drivers/net/wireless/ath/wil6210/pcie_bus.c:489:12: error: 'wil6210_pm_resume' defined but not used [-Werror=unused-function] drivers/net/wireless/ath/wil6210/pcie_bus.c:484:12: error: 'wil6210_pm_suspend' defined but not used [-Werror=unused-function] Using an __maybe_unused is easier here, so I'm replacing all the other #ifdef in this file as well for consistency. Fixes: 94162666cd51 ("wil6210: run-time PM when interface down") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-27ath10k: wmi: remove redundant integer fcColin Ian King
Variable fc is being assigned but never used, so remove it. Cleans up the clang warning: warning: Value stored to 'fc' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of overlapping changes. Also on the net-next side the XDP state management is handled more in the generic layers so undo the 'net' nfp fix which isn't applicable in net-next. Include a necessary change by Jakub Kicinski, with log message: ==================== cls_bpf no longer takes care of offload tracking. Make sure netdevsim performs necessary checks. This fixes a warning caused by TC trying to remove a filter it has not added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20iwlwifi: define and use if iwl_mvm_has_tlc_offloadEmmanuel Grumbach
This aligns the code with the existing pattern to check if the firmware has a certain capability. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: mvm: send the low latency commandShaul Triebitz
Recently a new command was added to the firmware for setting a MAC's low-latency mode. Use it. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: mvm: adjust to quota offloadShaul Triebitz
Skip Quota handling if firmware implements Quota. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: mvm: don't warn on multiple packets when opening a queueSara Sharon
When we have TSO enabled, we might end up segmenting it and queuing multiple packets before the queue is even enabled. This causes a warning. For example, when starting TCP traffic on a non-zero TID, the first packets may not have DSCP and will be sent on TID 0, while the actual data packets will be sent on the TID. To prevent this, simply remove the warning. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-20iwlwifi: add skb address to tx cmd in trace events dataMordechay Goodstein
This helps matching tx cmd with other trace events, like net_dev_xmit and net_dev_queue etc. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-09-16 15:34:28 +0000