summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2018-05-23brcmfmac: trigger memory dump upon firmware halt signalFranky Lin
PCIe dongle firmware signals a halt/trap through mailbox interrupt. Trigger a memory dump upon receiving such signal could help to provide useful information for issue debug. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23brcmfmac: validate user provided data for memdump before copyingFranky Lin
In patch "brcmfmac: add support for sysfs initiated coredump", a new scenario of brcmf_debug_create_memdump was added in which the user of the function might not necessarily provide prefix data. Hence the function should not assume the data is always valid and should perform a check before copying. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mwifiex: support sysfs initiated device coredumpArend Van Spriel
Since commit 3c47d19ff4dc ("drivers: base: add coredump driver ops") it is possible to initiate a device coredump from user-space. This patch adds support for it adding the .coredump() driver callback. As there is no longer a need to initiate it through debugfs remove that code. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23brcmfmac: add support for sysfs initiated coredumpArend Van Spriel
The driver already supports device coredump initiated by firmware event. Since commit 3c47d19ff4dc ("drivers: base: add coredump driver ops") it is also possible to initiate it from user-space through sysfs. This patch adds support for SDIO and PCIe devices. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23brcmfmac: move ALLFFMAC variable in flowring moduleArend Van Spriel
The only user of ALLFFMAC is the flowring module so no need to expose it in a header file. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mac80211: Support adding duration for prepare_tx() callbackIlan Peer
There are specific cases, such as SAE authentication exchange, that might require long duration to complete. For such cases, add support for indicating to the driver the required duration of the prepare_tx() operation, so the driver would still be able to complete the frame exchange. Currently, indicate the duration only for SAE authentication exchange, as SAE authentication can take up to 2000 msec (as defined in IEEE P802.11-REVmd D1.0 p. 3504). As the patch modified the prepare_tx() callback API, also modify the relevant code in iwlwifi. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-23Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Bring in net-next which had pulled in net, so I have the changes from mac80211 and can apply a patch that would otherwise conflict. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-23rsi: add fix for corruption of auto rate tableSanjay Konduri
Auto rate table sent to firmware is getting corrupted as memset to zeros is not done. Added memset to skb data before filling auto rate table. Signed-off-by: Sanjay Konduri <sanjay.konduri@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23rsi: add fix for crash during assertionsSanjay Konduri
Observed crash in some scenarios when assertion has occurred, this is because hw structure is freed and is tried to get accessed in some functions where null check is already present. So, avoided the crash by making the hw to NULL after freeing. Signed-off-by: Sanjay Konduri <sanjay.konduri@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23brcmfmac: add debugfs entry for reading firmware capabilitiesRafał Miłecki
This allows reading all capabilities as reported by a firmware. They are printed using native (raw) names, just like developers like it the most. It's how firmware reports support for various features, e.g. supported modes, supported standards, power saving details, max BSS-es. Access to all that info is useful for trying new firmwares, comparing them and debugging features AKA bugs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mwifiex: correct histogram data with appropriate indexXinming Hu
Correct snr/nr/rssi data index to avoid possible buffer underflow. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: use udelay instead of usleep_range in mt76x2_mac_stopFelix Fietkau
usleep_range can cause excessive latency on channel change if waiting for the MAC to stop fails. It will be forced to stop by the code following that loop anyway. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: wait for pending tx to complete before switching channelFelix Fietkau
Reduces interruption caused by scanning Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: move ieee80211_hw allocation to common coreFelix Fietkau
Allows it to be shared between different drivers and locks to be initialized earlier Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: prevent tx scheduling during channel changeFelix Fietkau
Re-schedule tx afterwards Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: only stop tx queues on offchannel, not during the entire scanFelix Fietkau
During scans, mac80211 frequently switches back to the home channel to minimize interruption of ongoing traffic. Keep regular tx queues active during that time. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: discard early received packets if not running yetFelix Fietkau
If the radio was previously in running state, it can receive some packets before it is able to process them. This can lead to a crash if the channel is not initialized yet. Discard all rx packets until start() is called Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: fix sending encrypted broadcast packets for secondary interfacesFelix Fietkau
For encryption to work properly, the BSS index needs to be initialized for the WCID entry used for the interface. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76x2: apply coverage class on slot time tooLorenzo Bianconi
According to 802.11-2007 17.3.8.6 (slot time), the slot time should be increased by 3 us * coverage class. Taking into account coverage class in slot time configuration allows to increase by an order of magnitude the throughput on a 4Km link in a noisy environment Tested-by: Luca Bisti <luca.bisti@gmail.com> Tested-by: Gaetano Catalli <gaetano.catalli@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.18. Major changes: ath10k * add quiet mode support for QCA6174/QCA9377 wil6210 * disable WIL6210_TRACING kconfig option by default
2018-05-22mac80211_hwsim: Fix radio dump for radio idx 0Andrew Zaborowski
Since 6335698e24ec11e1324b916177da6721df724dd8 the radio with idx of 0 will not get dumped in HWSIM_CMD_GET_RADIO because of the last_idx checks. Offset cb->args[0] by 1 similarly to what is done in nl80211.c. Fixes: 6335698e24ec ("mac80211_hwsim: add generation count for netlink dump operation") Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-17Merge tag 'wireless-drivers-next-for-davem-2018-05-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.18 The first pull request for 4.18. As usual new features and bug fixes but nothing really special. I also merged wireless-drivers due to an iwlwifi patch dependency. Major changes: iwlwifi * implement Traffic Condition Monitor and use it for scan, BT coex and to detect when the AP doesn't support UAPSD properly * some more work for the 22000 family of devices; * introduce AMSDU rate control offload qtnfmac * DFS offload support rsi * roaming enhancements * increase max supported aggregation subframes * don't advertise 5 GHz support if the device doesn't support it brcmfmac * add support for BCM4366E chipset * add support for bcm43364 wireless chipset ath10k * enable temperature reads for QCA6174 and QCA9377 * add firmware memory dump support for QCA9984 * continue adding WCN3990 support via SNOC bus ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16hostap: switch to proc_create_{seq,single}_dataChristoph Hellwig
And use proc private data directly instead of doing a detour through seq->private. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-15brcmfmac: fix initialization of struct cfg80211_inform_bss variableFranky Lin
This patch fixes a sparse warning "Using plain integer as NULL pointer" about cfg80211_inform_bss structure initialization. Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-15b43: fix transmit failure when VT is switchedTaketo Kabe
Setup: Using BCM4306 rev.03 chip based CardBus wireless card. IRQ is shared with yenta (cardbus bridge) and i915 (display) driver. For firmware, installed latest but dated openfwwf 5.2 (http://netweb.ing.unibs.it/~openfwwf/) How-to-reproduce: Do "ssh <NetBSD-remotehost>", then "ls -lR /" to generate traffic, then repeatedly switch VTs by Alt-F1<>Alt-F2. Eventually (within a minute) the card stops working. You can receive traffic but no transmission. For unknown reason it doesn't occur when just generating traffic by "ssh <remotehost> ls -lR /". With CONFIG_B43_DEBUG=y kernel config, when it stops, the debug message shows kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 148, but got 180 The slot offset I observed so far was always 32. When err_out2 is not set to make error messages successive, the debug output will be like this: kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 116, but got 148 kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 116, but got 150 kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 116, but got 120 kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 116, but got 152 kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 116, but got 122 kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 116, but got 154 kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 116, but got 124 kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 116, but got 156 kernel: b43-phy1 debug: Out of order TX status report on DMA ring 1. Expected 116, but got 126 The TX ring alternates between 2 sequences; the ring seems to be completely confused. Controller restart is needed. Workaround(1): This problem doesn't occur when using propriatory firmware you will extract by b43-fwcutter, so it may be a bug in openfwwf firmware, as the comment in the b43_dma_handle_txstatus() suggests. I wasn't able to find a bug in the terse openfwwf code though. Workaround(2): Using "pio=1" option to not use DMA makes this problem to not occur. Description of the patch: This patch will forcibly reset the controller to make it work again. Very kludgy and doesn't look right, but the traffic will continue to flow. Signed-off-by: Taketo Kabe <kabe@sra-tohoku.co.jp> Reviewed-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-15rsi: Set wowlan flag while writing wowlan config parametersSiva Rebbagondla
As wowlan enable flag did not set, while writing wowlan parameters to card using rsi_send_vap_dynamic_update, which results firmware is unable to set wowlan configurations. Hence, setting wowlan flag before sending parameters. Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-15rsi: reset hibernate_resume flag to work hibernate resume in coex mode.Siva Rebbagondla
In coex mode, observed hibernate resume is not working properly, as the hibernate_resume flag is not getting reset in rsi_coex_recv_pkt(), when common card ready indication received from firmware. Hence resetting hibernate_resume flag in this function. Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-15rsi: Add null check for virtual interfaces in wowlan configSanjay Kumar Konduri
When the "poweroff" command is executed after wowlan enabled, we have observed a system crash. In the system "poweroff" sequence, network-manager is sent to inactive state by cleaning up the network interfaces, using rsi_mac80211_remove_interface() and when driver tries to access those network interfaces in rsi_wowlan_config() which was invoked by SDIO shutdown, results in a crash. Added a NULL check before accessing the network interfaces in rsi_wowlan_config(). Signed-off-by: Sanjay Kumar Konduri <sanjay.konduri@redpinesignals.com> Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Sushant Kumar Mishra <sushant.mishra@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-15brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flagRafał Miłecki
brcmfmac is a FullMAC driver and it implements/uses cfg80211 interface for stations management. At the same time it doesn't receive or pass up management frames. This flag indicates that authenticator doesn't have to subscribe to or handle management frames. Some authenticators (e.g. hostapd) were working with brcmfmac thanks to some extra assumptions. This commit clears up the situation. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-14ath10k: re-enable the firmware fallback mechanism for testmodeAndres Rodriguez
The ath10k testmode uses request_firmware_direct() in order to avoid producing firmware load warnings. Disabling the fallback mechanism was a side effect of disabling warnings. We now have a new API that allows us to avoid warnings while keeping the fallback mechanism enabled. So use that instead. Signed-off-by: Andres Rodriguez <andresx7@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14ath10k: use firmware_request_nowarn() to load firmwareAndres Rodriguez
This reduces the unnecessary spew when trying to load optional firmware: "Direct firmware load for ... failed with error -2" Signed-off-by: Andres Rodriguez <andresx7@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-12wil6210: rate limit wil_rx_refill errorDedy Lansky
wil_err inside wil_rx_refill can flood the log buffer. Replace it with wil_err_ratelimited. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: remove unused rx_reorder membersDedy Lansky
Remove unused members from struct wil_tid_ampdu_rx Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: Initialize reply struct of the WMI commandsAlexei Avshalom Lazar
WMI command reply saved in uninitialized struct. In order to avoid accessing unset values from FW initialize the reply struct. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: move WMI functionality out of wil_cfg80211_mgmt_txDedy Lansky
Rearrange the code by having new function wmi_mgmt_tx() to take care of the WMI part of wil_cfg80211_mgmt_tx(). Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: change reply_size arg to u16 in wmi_callLior David
Change the type of the argument reply_size from u8 to u16 in order to support reply sizes > 255 bytes. The driver already supports u16 reply size in all other places, this was the only missing change. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: fix call to wil6210_disconnect during unloadLior David
Move the call to wil6210_disconnect so it will be called before unregister_netdevice. This is because it calls netif_carrier_off which is forbidden to call on an unregistered net device. Calling netif_carrier_off can add a link watch event which might be handled after net device was freed, causing a kernel oops. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: align to latest auto generated wmi.hAhmad Masri
Align to latest version of the auto generated wmi file describing the interface with FW Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: disable tracing config optionAlexei Avshalom Lazar
Disable WIL6210_TRACING by default to avoid its performance overhead. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: replace bit shifts with the BIT() macro for rx desc bitsGovind Singh
Use the BIT() macro from 'linux/bitops.h' to define the rx desc bit flags to have consistency with new definitions. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: hw: make consistent usage of ATH10K_FW_DIR in pathsMarcus Folkesson
For some reason not all entries used ATH10K_FW_DIR so fix that. No functional changes. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: remove variables which set but not usedKenneth Lu
Variable buf_len and num_vdev_stats are being assigned but never read. These are redundant and can be remove. Signed-off-by: Kenneth Lu <kuohsianglu@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: fix return value check in wake_tx_q opErik Stromdahl
ath10k_mac_tx_push_txq returns either a postive integer (length) on success or a negative error code on error. The "if (ret) break;" statement will thus always break out of the loop immediately after ath10k_mac_tx_push_txq has returned (making the loop pointless). A side effect of this fix is that we will iterate the queue until ath10k_mac_tx_push_txq returns -ENOENT. This will make sure the queue is not added back to ar->txqs when it is empty. This could potentially improve performance somewhat (I have seen a small improvement with SDIO devices). Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: snoc: Remove owner assignment from platform_driverFabio Estevam
Structure platform_driver does not need to set the owner field, as this will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: add quiet mode support for QCA6174/QCA9377Yu Wang
To enable thermal throttling for QCA6174 and QCA9377, implement gen_pdev_set_quiet_mode for them. With this change, quiet period for QCA6174/QCA9377 can be also set/get via debugfs. Usage: To set quiet period: echo <period> > /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period To get the current quiet period: cat /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period This change has been verified with QCA6174 hw3.2(fw: WLAN_RM.4.4.1-00102-QCARMSWP-1). Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12rsi: fix spelling mistake: "thead" -> "thread"Colin Ian King
Trivial fix to spelling mistake in rsi_dbg debug message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12mt76x2: add a polling delay in mt76x2_mac_stop routineLorenzo Bianconi
Add a usleep_range in mt76x2_mac_stop routine in order to add a polling delay checking values of MT_MAC_STATUS and IBI_R12 registers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wireless-drivers: Dynamically allocate struct station_infoToke Høiland-Jørgensen
Since the addition of the TXQ stats to cfg80211, the station_info struct has grown to be quite large, which results in warnings when allocated on the stack. Fix the affected places to do dynamic allocations instead. Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-10Merge tag 'mac80211-for-davem-2018-05-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We only have a few fixes this time: * WMM element validation * SAE timeout * add-BA timeout * docbook parsing * a few memory leaks in error paths ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 22:08:20 +0000