summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2018-05-09mwifiex: increase TX threashold to avoid TX timeout during ED MAC testGanapathi Bhat
While carrying energy detection(ED) tests, the chip will stop transmission upon detecting an energy in the connected channel. As a feedback, driver will stop dequeuing TX packets and due to which wmm_tx_pending keep incremeting. Once wmm_tx_pending reaches 100, driver calls netif_tx_stop_queue(). If TX ques is not restarted within 5(watchdog_timeo) seconds, it will result in TX timeout. The ED test is carried out for one minute and the current threshold of 100 is easily overcome by the traffic, cuasing TX timeouts. To fix this increase the threshold to 400. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-09mwifiex: delete unneeded includeJulia Lawall
Nothing that is defined in 11ac.h is referenced in cmdevt.c. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-09brcmfmac: Add support for bcm43364 wireless chipsetSean Lanigan
Add support for the BCM43364 chipset via an SDIO interface, as used in e.g. the Murata 1FX module. The BCM43364 uses the same firmware as the BCM43430 (which is already included), the only difference is the omission of Bluetooth. However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place triggers the brcmfmac driver to load, and then correctly use the firmware file 'brcmfmac43430-sdio.bin'. Signed-off-by: Sean Lanigan <sean@lano.id.au> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-09rtlwifi: remove duplicate definition of antenna number for btcoexPing-Ke Shih
Two enumerations bt_total_ant_num and bt_ant_num are identical, so one can be removed. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-07mac80211_hwsim: fix a possible memory leak in hwsim_new_radio_nl()YueHaibing
'hwname' should be freed before leaving from the error handling cases, otherwise it will cause mem leak Fixes: cb1a5bae5684 ("mac80211_hwsim: add permanent mac address option for new radios") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-04mt76x2: fix avg_rssi estimationLorenzo Bianconi
Add leftover filter coefficients in IIR rssi estimation Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04ipw2200: fix spelling mistake: "functionalitis" -> "functionalities"Colin Ian King
Trivial fix to spelling mistake in module parameter description text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04mt76x2: remove unnecessary break in mt76x2_mac_process_tx_rate()Lorenzo Bianconi
Remove unnecessary break statement in the default case of bw switch block in mt76x2_mac_process_tx_rate routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04rtlwifi: fix spelling mistake: "dismatch" -> "mismatch"Colin Ian King
Trivial fix to spelling mistake in RT_TRACE message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04rt2x00: check against flushing empty queueStanislaw Gruszka
We have check if queue is not empty when start flushing queues on by mac80211 callback, but we also can start flushing queues by internal driver calls. So move check into rt2x00queue_flush_queue() to assure we do not flush empty queue anytime. Additionally add warning if we start to kick empty queue as in such situation we set wrong index in the HW queue, what can confuse the HW and have various negative consequences. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04rt2x00: call sta_add/remove directly in rt2800Stanislaw Gruszka
Only rt2800 subdriver of rt2x00 implement sta_add() and sta_remove(), we do not need generic version of those. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: coarse support for PCIe shared structure rev7Franky Lin
Revision 7 of PCIe dongle interface increases the item size of tx and rx complete rings to accommodate extra payload for new feature. This patch simply bump up the size of these two rings without adding the support for utilizing the new space. This makes brcmfmac compatible with rev7 firmware. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: add hostready indicationFranky Lin
A hostready signal is introduced to inform firmware through mailbox doorbell1 when common ring initialized or D3 exited. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: constify firmware mapping tablesArend Van Spriel
The information in the firmware mapping does not need to be modified so it can be static const. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: use nl80211_band directly to get ieee80211 channelFranky Lin
The enum nl80211_band used to retrieve wiphy->bands is the same as wiphy->bands->band which is checked by wiphy_register(). So it can be used directly as parameter of ieee80211_channel_to_frequency(). Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: reports boottime_ns while informing bssFranky Lin
Provides a timestamp in bss information so user space can see when the bss info was updated. Since tsf is not available from the dongle events boottime is reported instead. Reported-by: Dmitry Shmidt <dimitrysh@google.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: check p2pdev mac address uniquenessArend Van Spriel
The mac address for p2pdev must be different from the primary interface due to firmware requirement. Add an explicit check for this requirement if user-space provides a mac address. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30ipw2100: fix spelling mistake: "decsribed" -> "described"Colin Ian King
Trivial fix to spelling mistake in comment and in the ord_data text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30rt2x00: fix spelling mistake in various macros, UKNOWN -> UNKNOWNColin Ian King
Rename several macros that contain mispellings of UNKNOWN Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30rsi_91x: fix uninitialized variableGustavo A. R. Silva
There is a potential execution path in which variable ret is returned without being properly initialized previously. Fix this by storing the value returned by function rsi_usb_master_reg_write into _ret_. Addresses-Coverity-ID: 1468407 ("Uninitialized scalar variable") Fixes: 16d3bb7b2f37 ("rsi: disable fw watchdog timer during reset") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30rsi_91x: fix structurally dead codeGustavo A. R. Silva
Function rsi_hal_key_config returns before reaching code at line 922 if (status), hence this code is structurally dead. Fix this by storing the value returned by rsi_hal_load_key into _status_ for its further evaluation and use. Addresses-Coverity-ID: 1468409 ("Structurally dead code") Fixes: 4fd6c4762f37 ("rsi: roaming enhancements") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30wlcore: sdio: allow pm to handle sdio powerEyal Reizer
pm_runtime handles sdio power on and power off transitions. An old workaround for trying to control the power explicitly from the driver was in fact causing failures on suspend/resume as the mmc layer already power the module on resume. In case of resume pm_runtime_get sync returns a positive device's usage count causing the driver to try an re-initialize an already initialized device. This was causing sdio bus failure on resume. Remove this manual power on/off sequence as it is in-fact not needed. Signed-off-by: Eyal Reizer <eyalr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30qtnfmac: fix qtnf_netdev_hard_start_xmit()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30net: wireless: b43legacy: Replace GFP_ATOMIC with GFP_KERNEL in dma_tx_fragmentJia-Ju Bai
dma_tx_fragment() is never called in atomic context. dma_tx_fragment() is only called by b43legacy_dma_tx(), which is only called by b43legacy_tx_work(). b43legacy_tx_work() is only set a parameter of INIT_WORK() in b43legacy_wireless_init(). Despite never getting called from atomic context, dma_tx_fragment() calls alloc_skb() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: keep user configured mac address during changing virtual interfaceXinming Hu
During changing virtual interface, keep using previous net device mac address. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: always configure firmware mac address during changing virtual interfaceXinming Hu
When interface type changed, firmware using a new connction pointer. We need Re-configure the mac address. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: make firmware mac address consistent with host configurationXinming Hu
For user configurated mac address, directly set to firmware with no change. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: fix mwifiex_hard_start_xmit()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76: check for pending reset before attempting to schedule txFelix Fietkau
The check within mt76_txq_send_burst is not enough, as it happens after a first frame has already been queued up Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76: add rcu locking around tx schedulingFelix Fietkau
Fixes a reported lockdep error in mac80211: [ 179.867321] ============================= [ 179.871510] WARNING: suspicious RCU usage [ 179.875528] 4.14.32 #0 Not tainted [ 179.878924] ----------------------------- [ 179.882981] backports-2017-11-01/net/mac80211/tx.c:594 suspicious rcu_dereference_check() usage! [ 179.891785] [ 179.891785] other info that might help us debug this: [ 179.891785] [ 179.899824] [ 179.899824] rcu_scheduler_active = 2, debug_locks = 1 [ 179.906343] 2 locks held by ksoftirqd/0/7: [ 179.910479] #0: (&(&q->lock)->rlock){+.-.}, at: [<86b207a4>] mt76_dma_tx_cleanup+0x64/0x354 [mt76] [ 179.919734] #1: (&(&fq->lock)->rlock){+.-.}, at: [<87238410>] ieee80211_tx_dequeue+0x54/0xc3c [mac80211] [ 179.929890] [ 179.929890] stack backtrace: [ 179.934257] CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 4.14.32 #0 [ 179.940421] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000036 00000000 00000000 [ 179.948864] 87c3d24c 80696377 8061039c 00000000 00000007 00000001 87c5db78 6534689d [ 179.957306] 00000000 00000000 80e10000 87c5da74 00000001 0000015a 00000007 00000000 [ 179.965748] 00000000 806a0000 000e4171 00000000 00000000 00000000 ffffffff 00000001 [ 179.974189] 806c0000 8692b240 86b000d0 87316fe4 00000001 802c9a68 00000000 80700000 [ 179.982632] ... [ 179.985104] Call Trace: [ 179.987582] [<80010a48>] show_stack+0x58/0x100 [ 179.992040] [<804c2c58>] dump_stack+0xe8/0x170 [ 179.996868] [<87234a04>] ieee80211_tx_h_select_key+0xa8/0x5b8 [mac80211] [ 180.004299] [<87238d44>] ieee80211_tx_dequeue+0x988/0xc3c [mac80211] [ 180.011048] [<86b230dc>] mt76_txq_schedule+0x110/0x3a4 [mt76] [ 180.016821] [<86b209d0>] mt76_dma_tx_cleanup+0x290/0x354 [mt76] [ 180.022777] [<86be2e60>] mt7603_tx_tasklet+0x40/0x6c [mt7603e] [ 180.028637] [<80037058>] tasklet_action+0x110/0x1ec [ 180.033532] [<804e1dac>] __do_softirq+0x164/0x35c [ 180.038235] [<80037174>] run_ksoftirqd+0x40/0x84 [ 180.042870] [<800580c8>] smpboot_thread_fn+0x1a8/0x1d8 [ 180.048023] [<800542e8>] kthread+0x130/0x144 [ 180.052297] [<8000b1f8>] ret_from_kernel_thread+0x14/0x1c Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76: add rcu locking in tid reorder functionFelix Fietkau
Avoids having the tid or station entry disappear prematurely. Also cancel the reorder work earlier to avoid further processing delayed by waiting for the lock to be released Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76: fix concurrent rx calls on A-MPDU releaseFelix Fietkau
Add a spinlock in mt76_rx_complete. Without this, multiple stats updates could happen in parallel, which can lead to deadlocks. There are probably more corner cases fixed by this change. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76x2: fix is_mt7612 routineLorenzo Bianconi
Fix is_mt7612 routine since asic version is set in mt76_dev revision field and not in mt76x2_dev one. Moreover remove mt76x2_dev rev field since it is never used in the driver Fixes: 7bc04215a66b ('mt76: add driver code for MT76x2e') Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-27Merge tag 'wireless-drivers-for-davem-2018-04-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.17 A few fixes for 4.17 but nothing really special. The new ETSI WMM parameter support for iwlwifi is not technically a bugfix but important for regulatory compliance. iwlwifi * use new ETSI WMM parameters from regulatory database * fix a regression with the older firmware API 31 (eg. 31.560484.0) brcmfmac * fix a double free in nvmam loading fails rtlwifi * yet another fix for ant_sel module parameter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27ath10k: sdio: jump to correct label in error handling pathNiklas Cassel
Jump to the correct label in error handling path. At this point of execution create_singlethread_workqueue() has succeeded, so it should be properly destroyed. Jump label was renamed in commit ec2c64e20257 ("ath10k: sdio: fix memory leak for probe allocations"). However, the bug was originally introduced in commit d96db25d2025 ("ath10k: add initial SDIO support"). Fixes: d96db25d2025 ("ath10k: add initial SDIO support") Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-27ath10k: fix spelling mistake: "servive" -> "service"Colin Ian King
Trivial fix to spelling mistake in ath10k_warn warning message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-27ath6kl: fix ath6kl_data_tx()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-27ath10k: fix kernel panic while reading tpc_statsTamizh Chelvam
When attempt to read tpc_stats for the chipsets which support more than 3 tx chain will trigger kernel panic(kernel stack is corrupted) due to writing values on rate_code array out of range. This patch changes the array size depends on the WMI_TPC_TX_N_CHAIN and added check to avoid write values on the array if the num tx chain get in tpc config event is greater than WMI_TPC_TX_N_CHAIN. Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00057 Kernel panic log : [ 323.510944] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: bf90c654 [ 323.510944] [ 323.524390] CPU: 0 PID: 1908 Comm: cat Not tainted 3.14.77 #31 [ 323.530224] [<c021db48>] (unwind_backtrace) from [<c021ac08>] (show_stack+0x10/0x14) [ 323.537941] [<c021ac08>] (show_stack) from [<c03c53c0>] (dump_stack+0x80/0xa0) [ 323.545146] [<c03c53c0>] (dump_stack) from [<c022e4ac>] (panic+0x84/0x1e4) [ 323.552000] [<c022e4ac>] (panic) from [<c022e61c>] (__stack_chk_fail+0x10/0x14) [ 323.559350] [<c022e61c>] (__stack_chk_fail) from [<bf90c654>] (ath10k_wmi_event_pdev_tpc_config+0x424/0x438 [ath10k_core]) [ 323.570471] [<bf90c654>] (ath10k_wmi_event_pdev_tpc_config [ath10k_core]) from [<bf90d800>] (ath10k_wmi_10_4_op_rx+0x2f0/0x39c [ath10k_core]) [ 323.583047] [<bf90d800>] (ath10k_wmi_10_4_op_rx [ath10k_core]) from [<bf8fcc18>] (ath10k_htc_rx_completion_handler+0x170/0x1a0 [ath10k_core]) [ 323.595702] [<bf8fcc18>] (ath10k_htc_rx_completion_handler [ath10k_core]) from [<bf961f44>] (ath10k_pci_hif_send_complete_check+0x1f0/0x220 [ath10k_pci]) [ 323.609421] [<bf961f44>] (ath10k_pci_hif_send_complete_check [ath10k_pci]) from [<bf96562c>] (ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci]) [ 323.622490] [<bf96562c>] (ath10k_ce_per_engine_service [ath10k_pci]) from [<bf9656f0>] (ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci]) [ 323.635423] [<bf9656f0>] (ath10k_ce_per_engine_service_any [ath10k_pci]) from [<bf96365c>] (ath10k_pci_napi_poll+0x44/0xe8 [ath10k_pci]) [ 323.647665] [<bf96365c>] (ath10k_pci_napi_poll [ath10k_pci]) from [<c0599994>] (net_rx_action+0xac/0x160) [ 323.657208] [<c0599994>] (net_rx_action) from [<c02324a4>] (__do_softirq+0x104/0x294) [ 323.665017] [<c02324a4>] (__do_softirq) from [<c0232920>] (irq_exit+0x9c/0x11c) [ 323.672314] [<c0232920>] (irq_exit) from [<c0217fc0>] (handle_IRQ+0x6c/0x90) [ 323.679341] [<c0217fc0>] (handle_IRQ) from [<c02084e0>] (gic_handle_irq+0x3c/0x60) [ 323.686893] [<c02084e0>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70) [ 323.694349] Exception stack(0xdd489c58 to 0xdd489ca0) [ 323.699384] 9c40: 00000000 a0000013 [ 323.707547] 9c60: 00000000 dc4bce40 60000013 ddc1d800 dd488000 00000990 00000000 c085c800 [ 323.715707] 9c80: 00000000 dd489d44 0000092d dd489ca0 c026e664 c026e668 60000013 ffffffff [ 323.723877] [<c02095c0>] (__irq_svc) from [<c026e668>] (rcu_note_context_switch+0x170/0x184) [ 323.732298] [<c026e668>] (rcu_note_context_switch) from [<c020e928>] (__schedule+0x50/0x4d4) [ 323.740716] [<c020e928>] (__schedule) from [<c020e490>] (schedule_timeout+0x148/0x178) [ 323.748611] [<c020e490>] (schedule_timeout) from [<c020f804>] (wait_for_common+0x114/0x154) [ 323.756972] [<c020f804>] (wait_for_common) from [<bf8f6ef0>] (ath10k_tpc_stats_open+0xc8/0x340 [ath10k_core]) [ 323.766873] [<bf8f6ef0>] (ath10k_tpc_stats_open [ath10k_core]) from [<c02bb598>] (do_dentry_open+0x1ac/0x274) [ 323.776741] [<c02bb598>] (do_dentry_open) from [<c02c838c>] (do_last+0x8c0/0xb08) [ 323.784201] [<c02c838c>] (do_last) from [<c02c87e4>] (path_openat+0x210/0x598) [ 323.791408] [<c02c87e4>] (path_openat) from [<c02c9d1c>] (do_filp_open+0x2c/0x78) [ 323.798873] [<c02c9d1c>] (do_filp_open) from [<c02bc85c>] (do_sys_open+0x114/0x1b4) [ 323.806509] [<c02bc85c>] (do_sys_open) from [<c0208c80>] (ret_fast_syscall+0x0/0x44) [ 323.814241] CPU1: stopping [ 323.816927] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.77 #31 [ 323.823008] [<c021db48>] (unwind_backtrace) from [<c021ac08>] (show_stack+0x10/0x14) [ 323.830731] [<c021ac08>] (show_stack) from [<c03c53c0>] (dump_stack+0x80/0xa0) [ 323.837934] [<c03c53c0>] (dump_stack) from [<c021cfac>] (handle_IPI+0xb8/0x140) [ 323.845224] [<c021cfac>] (handle_IPI) from [<c02084fc>] (gic_handle_irq+0x58/0x60) [ 323.852774] [<c02084fc>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70) [ 323.860233] Exception stack(0xdd499fa0 to 0xdd499fe8) [ 323.865273] 9fa0: ffffffed 00000000 1d3c9000 00000000 dd498000 dd498030 10c0387d c08b62c8 [ 323.873432] 9fc0: 4220406a 512f04d0 00000000 00000000 00000001 dd499fe8 c021838c c0218390 [ 323.881588] 9fe0: 60000013 ffffffff [ 323.885070] [<c02095c0>] (__irq_svc) from [<c0218390>] (arch_cpu_idle+0x30/0x50) [ 323.892454] [<c0218390>] (arch_cpu_idle) from [<c026500c>] (cpu_startup_entry+0xa4/0x108) [ 323.900690] [<c026500c>] (cpu_startup_entry) from [<422085a4>] (0x422085a4) Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-27ath10k: fix information leak in debugfsVenkateswara Naralasetty
During write to some of debugfs in ath10k, few variables exposing stack data when process user input. which leads to possible information leak. This patch fix this issue by initializing buffer and checks the return valure of 'simple_write_to_buffer'. Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-26iwlwifi: mvm: set wakeup filters for wowlan "any" configurationEliad Peller
In case of "any" wowlan trigger is configured, no valid wakeup filter was configured. Moreover, the fw assumes there's no connection when there are no configured wakeup filters. This leads to the station info not being updated on D3 command, causing rate_n_flags to be 0 when the offloading code sends tx frame (triggering SYSASSERT_102C due to invalid antenna param) Note: "any" trigger is currently assumed to only be used when entering d0i3 (which has a different flow). However, we still reach this code when using d3_test. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: mvm: remove check for non low latency TIDsSara Sharon
Firmware will only send non low-latency TIDs in the bitmap, so the check is now redundant. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: make bitfield a u32 instead of u16Luca Coelho
The bitfield we use in struct iwl_cfg contains 17 bits, but we declare it as u16. The compiler doesn't seem to have any problems with that (it probably automatically makes it u32), but it's cleaner to use a type that is long enough for all the flags. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: pcie: remove non-responsive deviceLuca Coelho
If we fail to to grab NIC access because the device is not responding (i.e. CSR_GP_CNTRL returns 0xFFFFFFFF), remove the device from the PCI bus, to avoid any further damage, and to let the user space rescan. In order to inform the userspace that a rescan is needed, we send a kobject uevent with "INACCESSIBLE". This functionality is disabled by default, but can be enabled via a new module parameter called "remove_when_gone". In the future we may change this module parameter to include 3 modes instead: do nothing; auto-rescan or; send uevent. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Rajat Jain <rajatja@google.com>
2018-04-26iwlwifi: fw: combine loading of last page block into main copy loopLuca Coelho
Now that we check and copy only the actual size of the page block, there is no need to treat the last block separately. Remove the mostly duplicate code and make the main copy loop handle also the last block. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: fw: harden page loading codeLuca Coelho
The page loading code trusts the data provided in the firmware images a bit too much and may cause a buffer overflow or copy unknown data if the block sizes don't match what we expect. To prevent potential problems, harden the code by checking if the sizes we are copying are what we expect. Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: mvm: move skb padding reservation earlierJohannes Berg
Future changes will require moving the HE radiotap data into the SKB head, but this means we need to have the alignment reservation done before that. To prepare, move the alignment reservation earlier here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: support new csr addresses for hw addressGolan Ben Ami
In future devices we use different csr addresses for hw addresses. Update csr addresses to support new and legacy devices. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: pcie: allow sending pre-built A-MSDUsEliad Peller
In case of A-MSDUs, the trans layer is taking care of building the subframes (out of the given skb), according to the given gso_size. However, in some testing flows, we want to build the whole A-MSDU frame in a different place (e.g. userspace), and ask the driver to send it as-is. In case of gso_size==0, simply treat the frame as normal-frame, although the A-MSDU flag is set. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: cfg: remove unnecessary cfg data in non-dvm devicesLuca Coelho
The max_data_size and max_inst_size values are only needed for DVM devices. Remove the assignment to those fields in 7000 and newer families so we can also remove the otherwise unnecessary inclusion of iwl-agn.h headers. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: introduce Image Loader (IML) - new firmware imageGolan Ben-Ami
In future devices a new image will be introduced - IML. The IML, image loader, is loaded by the ROM, and as part of the new self-init flow, loads the rest of the firmware images to the device. Store the image, so the ROM can load it to the device. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 01:55:23 +0000