summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2016-04-14ath10k: fix parenthesis alignmentKalle Valo
Found by checkpatch: drivers/net/wireless/ath/ath10k/mac.c:6800: Alignment should match open parent Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-14ath10k: prefer ether_addr_copy() over memcpy()Kalle Valo
Fixes checkpatch warning: drivers/net/wireless/ath/ath10k/wmi.c:5800: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2) Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-14ath10k: prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()Kalle Valo
Fixes checkpatch warnings: drivers/net/wireless/ath/ath10k/mac.c:452: Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp() drivers/net/wireless/ath/ath10k/mac.c:455: Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp() drivers/net/wireless/ath/ath10k/txrx.c:133: Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp() Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-14ath10k: prefer kernel type 'u64' over 'u_int64_t'Kalle Valo
Fixes checkpatch warnings: drivers/net/wireless/ath/ath10k/htt.h:1477: Prefer kernel type 'u64' over 'u_int64_t' drivers/net/wireless/ath/ath10k/htt.h:1480: Prefer kernel type 'u64' over 'u_int64_t' Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-14ath10k: fix checkpatch warnings related to spacesKalle Valo
Fix checkpatch warnings about use of spaces with operators: spaces preferred around that '*' (ctx:VxV) This has been recently added to checkpatch. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-14mwifiex: fix the incorrect WARN_ON during suspendVishal Thanki
During system suspend, there is a kernel WARNING issued if there is a pending command present. By marking the wait queue disabled after calling the command completion routine fixes it. Signed-off-by: Vishal Thanki <vishalthanki@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14mwifiex: fix incorrect ht capability problemAmitkumar Karwar
IEEE80211_CHAN_NO_HT40PLUS and IEEE80211_CHAN_NO_HT40PLUS channel flags tell if HT40 operation is allowed on a channel or not. This patch ensures ht_capability information is modified accordingly so that we don't end up creating a HT40 connection when it's not allowed for current regulatory domain. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14mwifiex: do not wait on semaphore during card removalXinming Hu
Host hang is observed if card is removed before firmware download gets completed. In this case, firmware will be failed to download and adapter structure gets freed. In other thread, mwifiex_remove_card() waits on semaphore until the firmware download fails. This wait is not necessary and may result in invalid adapter access. This patch uses down_trylock to return immediately so that hang issue won't occur. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14mwifiex: add default setting for pcie firmware downloadShengzhen Li
This patch adds default setting for pcie firmware download name in case that there are newer chipset version. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14mwifiex: add pcie usb/uart firmware download supportShengzhen Li
This patch adds support for downloading usb/uart firmware for 8997 chipset by reading the chip version. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14mwifiex: missing break statementAmitkumar Karwar
This patch adds missing break statement at the end of PCIE_DEVICE_ID_MARVELL_88W8897 switch section. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: create common function for handling brcmf_proto_hdrpull()Arend van Spriel
In receive path brcmf_proto_hdrpull() needs to be called and handled similar in brcmf_rx_frame() and brcmf_rx_event(). Move that duplicated code in separate function. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: revise handling events in receive pathArend van Spriel
Move event handling out of brcmf_netif_rx() avoiding the need to pass a flag. This flag is only ever true for USB hosts as other interface use separate brcmf_rx_event() function. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: cleanup ampdu-rx host reorder codeArend van Spriel
The code for ampdu-rx host reorder is related to the firmware signalling supported in BCDC protocol. This change moves the code to fwsignal module. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: screening firmware event packetFranky Lin
Firmware uses asynchronized events as a communication method to the host. The event packets are marked as ETH_P_LINK_CTL protocol type. For SDIO and PCIe bus, this kind of packets are delivered through virtual event channel not data channel. This patch adds a screening logic to make sure the event handler only processes the events coming from the correct channel. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: fix p2p scan abort null pointer exceptionHante Meuleman
When p2p connection setup is performed without having ever done an escan a null pointer exception can occur. This is because the ifp to abort scanning is taken from escan struct while it was never initialized. Fix this by using the primary ifp for scan abort. The abort should still be performed and all scan related commands are performed on primary ifp. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: insert default boardrev in nvram data if missingHante Meuleman
Some nvram files/stores come without the boardrev information, but firmware requires this to be set. When not found in nvram then add a default boardrev string to the nvram data. Reported-by: Rafal Milecki <zajec5@gmail.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: fix clearing wowl wake indicatorsHante Meuleman
Newer firmwares require the usage of the wowl wakeind struct as size for the iovar to clear the wake indicators. Older firmwares do not care, so change the used size. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14brcmfmac: clear eventmask array before using itHante Meuleman
When the event_msgs iovar is set an array is used to configure the enabled events. This arrays needs to nulled before configuring otherwise unhandled events will be enabled. This solves a problem where in case of wowl the host got woken by an incorrectly enabled event. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Adjust AFE crystal value on 8192euJes Sorensen
Adjust AFE before enabling PLL on 8192eu, probably also needed for 8723bu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Implement IQK calibration for 8192euJes Sorensen
8192eu has it's own IQK calibration procedure, and notably uses undocumented RF register 0x56 in the process. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Use proper register name for REG_PAD_CTRL1Jes Sorensen
Fixup another case where the hard coded register value was used instead of the name. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Implement 8192eu device specific quirksJes Sorensen
Set REG_QUEUE_CTRL and REG_ACLK_MON for 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Fix LDPC RX hang issue on 8192euJes Sorensen
Implement workaround for LDPC RX hands on 8192eu. This was inspired by workaround found in the 8192eu vendor driver. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set REG_USB_HRPWM for 8192euJes Sorensen
The vendor driver set register 0xfe58 REG_USB_HWPWM in it's init sequence for 8192eu. Do the same here. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set correct interrupt masking registers on 8192euJes Sorensen
Set HIMR[01] on 8192eu instead of HISR/HIMR. It's not obvious this really matters for USB devices, but this matches the register writes performed by the vendor driver. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Handle XTAL value setting on 8192euJes Sorensen
Set REG_AFE_XTAL_CTRL on 8192eu to the vendor driver value, and do not skip setting REG_MAX_AGGR_NUM on 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Provide special handling when writing RF regs on 8192euJes Sorensen
The 8192eu requires clearing/restoring bit 17 in REG_FPGA0_POWER_SAVE before/after writing RF registers. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Handle BB init for 8192euJes Sorensen
The 8192eu does not use REG_AFE_PLL_CTRL in it's BB init sequence, so provide device specific handling. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Correctly parse 8192eu efuseJes Sorensen
The 8192eu efuse only has power data for path A and B. It follows the same layout as 8723bu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Pick PHY init table based on chip version firstJes Sorensen
Pick PHY init table based on device before distinguishing between 1T/2T/high PA tables. The latter is only currently used for 8188cu/8192cu/8188ru. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add 8192eu PHY init tableJes Sorensen
The 8192eu also requires it's own PHY init table. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add 8192eu AGC tablesJes Sorensen
A device specific AGC table is required for the 8192eu as well. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add radio init tables for 8192euJes Sorensen
Add the required radio init tables for 8192eu devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Set TX page boundaries for 8192euJes Sorensen
The 8192eu also has it's own TRXFF boundary value to set. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Do not mess with AFE_XTAL_CTRL on 8192euJes Sorensen
To match the vendor driver, do not mess with AFE_XTAL_CTRL on 8192eu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-14rtl8xxxu: Add MAC init table for 8192euJes Sorensen
The 8192eu requires a different MAC init table. Add the missing table and specify the table to use in the fileops structure. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-12ath10k: remove MSI range supportRajkumar Manoharan
MSI-X is never well-tested, might contain bugs and generally isn't really all that useful to maintain. Also ath10k is mainly used with shared/singly-MSI interrupt systems. Hence removing MSI range support. This change will be useful for further cleanup in copy engine lock and to add NAPI support. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: enable set_tsf vdev command to WMI 10.4Peter Oh
10.4 firmware has addeded set_tsf vdev parameter, hence enable it. set_tsf function can be used to shift TBTT that will help avoid its clockdrift which happens when beacons are collided. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: update 10.4 WMI vdev parametersPeter Oh
Update 10.4 WMI vdev param to sync to current 10.4 firmware as of 2/23/2016. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: add a support of set_tsf on vdev interfacePeter Oh
10.2.4.70.24 firmware introduces new feature to set TSF via vdev parameter, hence implement relevant function. set_tsf function can be used to shift TBTT that will help avoid its clockdrift which happens when beacons are collided. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12ath10k: Document alloc_frag_desc_for_data_pkt config option.Ben Greear
This will help anyone trying to use the ack-rssi reporting feature with the host-specified TX-rate option in 10.4 firmware. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12iwlwifi: mvm: fix accessing Null pointer during fw dump collectionMatti Gottlieb
The firwmare file can come with data that is relevant for paging. This data is availablet to the firmware upon request, but it stored in the host's memory. During the firmware init flow, the driver configures the firmware so that the firwmare knows where is the data. When paging is used, the variable paging_mem_size is the number of bytes that are available through paging. This variable is not zeror-ed if the driver fails to configure the paging in the firmware, but the memory is freed which is inconsistent. This inconsistency led to a NULL pointer dereference in the code that collects the debug data. Fix this by zero-ing the paging_mem_size variable and NULLify the relevant pointers, so that the code that collects the debug data will know that the paging data is not available. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-04-12iwlwifi: 8000: fix MODULE_FIRMWARE inputSara Sharon
The firwmare name for 8000 is iwlwifi-8000C. The C is appended based on a value read from a register. This allows to load different firwmare versions based on the hardware step during development. Now that the hardware development is completed, we can hard code the 'C' and along the way, fix the input to MODULE_FIRMWARE. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116041 Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-04-12iwlwifi: mvm: avoid to WARN about gscan capabilitiesAyala Beker
Gscan capabilities were updated with new capabilities supported by the device. Update GSCAN capabilities TLV and avoid to WARN if the firmware does not have the new capabilities. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-04-12iwlwifi: add device IDs for the 8265 deviceOren Givon
Add new 8265 series PCI IDs. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-04-11Merge tag 'wireless-drivers-next-for-davem-2016-04-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers patches for 4.7 Major changes: iwlwifi * support for Link Quality measurement * more work 9000 devices and MSIx * continuation of the Dynamic Queue Allocation work * make the paging less memory hungry * 9000 new Rx path * removal of IWLWIFI_UAPSD Kconfig option ath10k * implement push-pull tx model using mac80211 software queuing support * enable scan in AP mode (NL80211_FEATURE_AP_SCAN) wil6210 * add basic PBSS (Personal Basic Service Set) support * add initial P2P support * add oob_mode module parameter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07Merge ath-next from ath.gitKalle Valo
ath.git patches for 4.7. Major changes: ath10k * implement push-pull tx model using mac80211 software queuing support * enable scan in AP mode (NL80211_FEATURE_AP_SCAN) wil6210 * add basic PBSS (Personal Basic Service Set) support * add initial P2P support * add oob_mode module parameter
2016-04-07mwifiex: dump pcie scratch registersXinming Hu
This patch prints pcie scratch registers during firmware dump. They will be useful for analysing firmware status. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-16 01:52:01 +0000