summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2017-08-08brcmfmac: Add support for CYW4373 SDIO/USB chipsetChi-Hsien Lin
Add support for CYW4373 SDIO/USB chipset. CYW4373 is a 1x1 dual-band 11ac chipset with 20/40/80Mhz channel support. It's a WiFi/BT combo device. Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08brcmfmac: set wpa_auth to WPA_AUTH_DISABLED in AP/OPEN security modeWright Feng
When setting wpa_auth to WPA_AUTH_NONE(1) in AP mode with WEP security, firmware will set privacy bit and add WPA OUI in VENDOR IE in beacon and probe response. The security type in softAP beacons confuse the supplicant in client side, and the user client will see [WPA-?] in supplicant scan result. So we set WPA_AUTH_DISABLED in softAP mode with OPEN security. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: p2p: use separate device addressXinming Hu
Per below statement about p2p device address in WFA P2P spec $2.4.3: The P2P Device Address of a P2P Device shall be its globally administered MAC address, or its globally administered MAC address with the locally administered bit set. This patch follow above statement, using a separate device address for p2p interface Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: wrapper wps ie in pass through tlvXinming Hu
This patch wrapper wps ie in pass through tlv, so that firmware could parse correctly. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: Do not change bss_num in change_virtual_intfXinming Hu
Commit 4d7ab36f0c47 ("mwifiex: Do not change bss_type in change_virtual_intf") kept original bss_type unchanged. bss_num should keep the same style, in this way. Unique tuple (bss_type, bss_num) will be able to locate the right priv structure. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08mwifiex: replace netif_carrier_on/off by netif_device_attach/dettachGanapathi Bhat
Driver is doing netif_carrier_off during suspend, which will set the IFF_LOWER_UP flag to 0. As a result certain applications will think this as a real carrier down and behave accordingly. This will cause issues like loss of IP address, for example. To fix this use netif_device_dettach during suspend. Fixes: 0026b32d723e ('mwifiex: fix Tx timeout issue during suspend test') Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: RTS threshold configurationKarun Eagalapati
Provision is added for configuring RTS threshold by sending vap dynamic update frame to firmware. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: buffer available interrupt handlingKarun Eagalapati
BUFFER_AVAILABLE interrupt is sent by firmware to indicate change in buffer status. We should check buffer status while handling this interrupt. Currently buffer status is checked only while dequeueing packets. This patch fixes a data traffic stuck problem observed occasionally. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: buffer full check optimizationKarun Eagalapati
We get buffer full event from firmware whenever Tx queue is full Host should stop writing packets after this and resume after buffer free event. Buffer status checking is optimized for once in 4 times if BUFF_FULL condition is not set, otherwise once for every packet. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: rename sdio_read_buffer_status_registerKarun Eagalapati
rsi_sdio_check_buffer_status would be the appropriate name for this function as we are checking hardware buffers availability status. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for U-APSD power saveKarun Eagalapati
This patch adds support for U-APSD power save. Configuration frame is downloaded to firmware with default settings and support is advertised to mac80211 Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for legacy power saveKarun Eagalapati
This patch adds support for legacy power save. Necessary configuration frames are downloaded to firmware when power save is enabled/disabled Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: update set_antenna command framePavani Muthyala
TX command frame set_antenna is modified to use common descriptor structure. Also it's subframe type is set. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for rf-kill functionalityPavani Muthyala
This patch implements rfkill_poll handler. Also, necessary changes are done in interface up and down handler to support rfkill functionality. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: fix uninitialized descriptor pointer issuePrameela Rani Garnepudi
This patch fixes the uninitialized descriptor pointer issue in function rsi_send_internal_mgmt_frame(). Descriptor should point to start of the skb data. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 9a629fafe7d8 ("rsi: immediate wakeup bit and priority for TX command packets") Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08ath9k: make ath_ps_ops structures as constBhumika Goyal
ath_ps_ops structures are only stored as a reference in the ps_ops field of a ath_common structure. This field is of type const, so make the structures as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08wcn36xx: Introduce mutual exclusion of fw configurationBjorn Andersson
As the association status changes the driver needs to configure the hardware. This is done based on information in the "sta" acquired by ieee80211_find_sta(), which requires the caller to ensure that the "sta" is valid while its being used; generally by entering an rcu read section. But the operations acting on the "sta" has to communicate with the firmware and may therefor sleep, resulting in the following report: [ 31.418190] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238 [ 31.425919] in_atomic(): 0, irqs_disabled(): 0, pid: 34, name: kworker/u8:1 [ 31.434609] CPU: 0 PID: 34 Comm: kworker/u8:1 Tainted: G W 4.12.0-rc4-next-20170607+ #993 [ 31.441002] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 31.450380] Workqueue: phy0 ieee80211_iface_work [ 31.457226] Call trace: [ 31.461830] [<ffffff8008088c58>] dump_backtrace+0x0/0x260 [ 31.464004] [<ffffff8008088f7c>] show_stack+0x14/0x20 [ 31.469557] [<ffffff8008392e70>] dump_stack+0x98/0xb8 [ 31.474592] [<ffffff80080e4330>] ___might_sleep+0xf0/0x118 [ 31.479626] [<ffffff80080e43a8>] __might_sleep+0x50/0x88 [ 31.485010] [<ffffff80088ff9a4>] mutex_lock+0x24/0x60 [ 31.490479] [<ffffff8008595c38>] wcn36xx_smd_set_link_st+0x30/0x130 [ 31.495428] [<ffffff8008591ed8>] wcn36xx_bss_info_changed+0x148/0x448 [ 31.501504] [<ffffff80088ab3c4>] ieee80211_bss_info_change_notify+0xbc/0x118 [ 31.508102] [<ffffff80088f841c>] ieee80211_assoc_success+0x664/0x7f8 [ 31.515220] [<ffffff80088e13d4>] ieee80211_rx_mgmt_assoc_resp+0x144/0x2d8 [ 31.521555] [<ffffff80088e1e20>] ieee80211_sta_rx_queued_mgmt+0x190/0x698 [ 31.528239] [<ffffff80088bc44c>] ieee80211_iface_work+0x234/0x368 [ 31.535011] [<ffffff80080d81ac>] process_one_work+0x1cc/0x340 [ 31.541086] [<ffffff80080d8368>] worker_thread+0x48/0x430 [ 31.546814] [<ffffff80080de448>] kthread+0x108/0x138 [ 31.552195] [<ffffff8008082ec0>] ret_from_fork+0x10/0x50 In order to ensure that the "sta" remains alive (and consistent) for the duration of bss_info_changed() mutual exclusion has to be ensured with sta_remove(). This is done by introducing a mutex to cover firmware configuration changes, which is made to also ensure mutual exclusion between other operations changing the state or configuration of the firmware. With this we can drop the rcu read lock. Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08ath10k: switch to use new generic UUID APIAndy Shevchenko
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08ath10k: fix memory leak in rx ring buffer allocationRakesh Pillai
The rx ring buffers are added to a hash table if firmware support full rx reorder. If the full rx reorder support flag is not set before allocating the rx ring buffers, none of the buffers are added to the hash table. There is a race condition between rx ring refill and rx buffer replenish from napi poll. The interrupts are enabled in hif start, before the rx ring is refilled during init. We replenish buffers from napi poll due to the interrupts which get enabled after hif start. Hence before the entire rx ring is refilled during the init, the napi poll replenishes a few buffers in steps of 100 buffers per attempt. During this rx ring replenish from napi poll, the rx reorder flag has not been set due to which the replenished buffers are not added to the hash table Set the rx full reorder support flag before we allocate the rx ring buffer to avoid the memory leak. Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-08ath10k: ath10k_htt_rx_amsdu_allowed() use ath10k_dbg()Gabriel Craciunescu
Each time we get disconnected from AP we get flooded with messages like: ... ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)! <until ratelimit kicks in> ath10k_warn: 155 callbacks suppressed ... Use ath10k_dbg() here too. Signed-off-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-07Merge tag 'wireless-drivers-next-for-davem-2017-08-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.14 The first wireless-drivers-next pull request for 4.14. I'm submitting this unusally late in the cycle as my vacation postponed this. But even if this is late there's not still that much new features, mostly cleanup or fixes. Major changes: ath10k * preparation for wcn3990 support iwlwifi * Reorganization of the code into separate directories continues qtnfmac * regulatory support updates * add get_channel, dump_survey and channel_switch cfg80211 handlers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-05iwlwifi: mvm: Fix a memory leak in an error handling path in ↵Christophe Jaillet
'iwl_mvm_sar_get_wgds_table()' We should free 'wgds.pointer' here as done a few lines above in another error handling path. It was allocated within 'acpi_evaluate_object()'. Fixes: c52030a01ccc ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-08-03wcn36xx: check dma_mapping_error()Rob Clark
Fixes splat: wcn36xx a204000.wcnss:smd-edge:wcnss:wifi: DMA-API: device driver failed to check map error[device address=0x00000000b45ba000] [size=3872 bytes] [mapped as single] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../lib/dma-debug.c:1167 check_unmap+0x474/0x8d0 Modules linked in: bnep(E) arc4(E) wcn36xx(E) mac80211(E) btqcomsmd(E) btqca(E) bluetooth(E) cfg80211(E) ecdh_generic(E) rfkill(E) vfat(E) fat(E) wcnss_ctrl qcom_wcnss_pil(E) mdt_loader(E) qcom_common(E) remoteproc(E) crc32_ce(E) virtio_ring(E) snd_soc_lpass_apq8016(E) snd_soc_lpass_cpu(E) virtio(E) snd_soc_lpass_platform(E) leds_gpio(E) snd_soc_hdmi_codec(E) snd_soc_apq8016_sbc(E) snd_soc_msm8916_digital(E) snd_soc_core(E) qcom_spmi_temp_alarm(E) ac97_bus(E) snd_pcm_dmaengine(E) snd_seq(E) snd_seq_device(E) snd_pcm(E) spi_qup(E) nvmem_qfprom(E) snd_timer(E) snd(E) soundcore(E) msm_rng(E) qcom_tsens(E) nvmem_core(E) uas(E) usb_storage(E) dm9601(E) cdc_ether(E) usbnet(E) mii(E) mmc_block(E) sdhci_msm(E) sdhci_pltfm(E) qcom_spmi_vadc(E) qcom_vadc_common(PE) clk_smd_rpm(E) industrialio(E) qcom_smd_regulator(E) pinctrl_spmi_mpp(E) pinctrl_spmi_gpio(E) rtc_pm8xxx(E) adv7511(E) smd_rpm(E) qcom_spmi_pmic(E) regmap_spmi(E) phy_msm_usb(E) usb3503(E) extcon_usb_gpio(E) ci_hdrc_msm(E) ci_hdrc(E) qcom_hwspinlock(E) udc_core(E) extcon_core(E) ehci_msm(E) i2c_qup(E) sdhci(E) msm(E) mmc_core(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) spmi_pmic_arb(E) drm(E) spmi(E) qcom_smd(E) rpmsg_core smsm(E) gpio_keys(E) smp2p(E) smem(E) hwspinlock_core(E) sunrpc(E) scsi_transport_iscsi(E) CPU: 0 PID: 0 Comm: swapper/0 Tainted: P E 4.12.0-rc7+ #1476 Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017 task: ffff000009049780 task.stack: ffff000009030000 PC is at check_unmap+0x474/0x8d0 LR is at check_unmap+0x474/0x8d0 ... Mapped at: dma_entry_alloc+0x68/0xa8 debug_dma_map_page+0x94/0x148 wcn36xx_dxe_fill_skb.isra.1+0xbc/0xf8 [wcn36xx] wcn36xx_dxe_init+0x244/0x398 [wcn36xx] wcn36xx_start+0xf4/0x298 [wcn36xx] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath9k: Add Dell Wireless 1802 with wowlan capabilityRosen Penev
Add the Dell Wireless 1802 card as an AR9462 in the ath9k pci list. Note that the wowlan feature is supported and has been tested successfully. Signed-off by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath9k: fix debugfs file permissionChristoph Fritz
This patch fixes a trivial debugfs file permission issue. Debugfs file ack_to has no write function, so S_IWUSR gets purged. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: explicitly request exclusive reset controlPhilipp Zabel
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: push peer type to target for TDLS peersManikanta Pubbisetty
WMI interface for all the firmwares(except QCA6174) does not include the type of peer(default/bss/tdls) requested during peer creation, therefore target creates a default peer. TDLS implementation on 10.4 firmware requires host to configure the peer type(tdls) for TDLS peers. This patch adds peer type parameter to the existing WMI interface for peer creation to accommodate this requirement. Tested this change on QCA9888(10.4-3.5.1-00018) and QCA988x(10.2.4.70.9-2) with ping tests for AP/STA modes. Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: add tdls support for 10.4 firmwaresManikanta Pubbisetty
This patch adds the support of TDLS feature for 10.4 firmware versions. A new WMI service is added to advertise the support of TDLS for 10.4 firmwares. Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: extend wmi service map to accommodate new servicesManikanta Pubbisetty
Though there is room to accommodate 512 services in wmi service ready event, target uses only first 4-bits of each 32-bit word for advertising wmi services thereby limiting max wmi services to 64. TDLS implementation for 10.4 firmwares introduces new wmi services by making use of remaining unused bits of each 32-bit word, therefore the wmi service mapping in host needs to be extended. This patch adds the logic to extend the wmi SVCMAP to accommodate new wmi services. Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: sdio: fix compile warningErik Stromdahl
As suggested by Arnd Bergmann, replace "while (time_before_...) {}" with "do {} while (time_before_...)" This fixes the following warnings detected by gcc 4.1.2: drivers/net/wireless/ath/ath10k/sdio.c: In function ‘ath10k_sdio_mbox_rxmsg_pending_handler’: drivers/net/wireless/ath/ath10k/sdio.c:676: warning: ‘ret’ may be used uninitialized in this function ... drivers/net/wireless/ath/ath10k/sdio.c: In function ‘ath10k_sdio_irq_handler’: drivers/net/wireless/ath/ath10k/sdio.c:1331: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: add initial USB supportErik Stromdahl
Chipsets like QCA9377 have support for USB so add initial USB bus support to ath10k. With this patch we have the low level HIF and HTC protocol working and it's possible to boot the firmware, but it's still not possible to connect or anything like. More changes are needed for full functionality. For that reason we print during initialisation: WARNING: ath10k USB support is incomplete, don't expect anything to work! Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: various usb related definitionsErik Stromdahl
Definitions for USB based chipsets Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03ath10k: set a-mpdu receiver reference numberMatthias Frei
Set the a-mpdu reference number in ath10k to make it accessible in the receivers radiotap header. Implemented as in ath9k. The reference number is needed for troubleshooting and research at the receivers site (e.g. to identify mpdu's that were aggregated in an a-mpdu) Signed-off-by: Matthias Frei <mf@frei.media> [kvalo@qca.qualcomm.com: fix checkpatch warning, commit log cleanup] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-08-03rtlwifi: Replace hardcode value with macroSouptick Joarder
In _rtl_init_mac80211(), hardcoded value for hw->max_listen_interval and hw->max_rate_tries are replaced by macro and removed the comment. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03mwifiex: pcie: compatible with wifi-only image while extract wifi-part fwXinming Hu
Sometimes, we might using wifi-only firmware with a combo firmware name, in this case, do not need to filter bluetooth part from header. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03mwifiex: make addba request command cleanXinming Hu
uninitilized variable, such as .add_req_result might be magic stack value. Initialize the structure to make it clean. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03net: qtnfmac: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03hostap: Fix outdated comment about dev->destructorStefano Brivio
After commit cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state."), setting 'dev->needs_free_netdev' ensures device data is released, and 'dev->destructor' is not used anymore. Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8192ee: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 1899 928 0 2827 b0b realtek/rtlwifi/rtl8192ee/sw.o File size After adding 'const': text data bss dec hex filename 1963 864 0 2827 b0b realtek/rtlwifi/rtl8192ee/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8188ee: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 3090 912 0 4002 fa2 realtek/rtlwifi/rtl8188ee/sw.o File size After adding 'const': text data bss dec hex filename 3154 848 0 4002 fa2 realtek/rtlwifi/rtl8188ee/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8723be: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 3032 912 0 3944 f68 realtek/rtlwifi/rtl8723be/sw.o File size After adding 'const': text data bss dec hex filename 3096 848 0 3944 f68 realtek/rtlwifi/rtl8723be/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8723ae: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2775 912 0 3687 e67 realtek/rtlwifi/rtl8723ae/sw.o File size After adding 'const': text data bss dec hex filename 2839 848 0 3687 e67 realtek/rtlwifi/rtl8723ae/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8821ae: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2491 960 0 3451 d7b realtek/rtlwifi/rtl8821ae/sw.o File size After adding 'const': text data bss dec hex filename 2587 864 0 3451 d7b realtek/rtlwifi/rtl8821ae/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8192se: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2817 1040 0 3857 f11 realtek/rtlwifi/rtl8192se/sw.o File size After adding 'const': text data bss dec hex filename 3009 848 0 3857 f11 realtek/rtlwifi/rtl8192se/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03rtlwifi: rtl8192de: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2833 945 12 3790 ece realtek/rtlwifi/rtl8192de/sw.o File size After adding 'const': text data bss dec hex filename 2929 849 12 3790 ece realtek/rtlwifi/rtl8192de/sw.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: Tidy up DMA mask settingRobin Murphy
As the only caller of dma_supported() outside of DMA API internals, the qtfnmac driver stands out and invites scrutiny. Thankfully, it's not being used for evil, but it is entirely redundant, since it open-codes a check that the DMA mask setting functions are going to perform anyway. In fact, the whole qtnf_pcie_init_dma_mask() function is nothing more than a rather long-winded implementation of dma_set_mask_and_coherent(), so let's just use that directly. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: prepare for AP_VLAN interface type supportSergey Matyukevich
Modify qlink command structures and interface types handling to prepare adding AP_VLAN support to qtnfmac driver. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: remove function qtnf_cmd_skb_put_actionSergey Matyukevich
This function is not used anymore, so remove it. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: fix handling of iftype mask reported by firmwareSergey Matyukevich
Firmware sends supported interface type rather than mask. As a result, types field of ieee80211_iface_limit structure may end up having multiple iftype bits set. This leads to WARN_ON from wiphy_verify_combinations. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-03qtnfmac: implement scan timeoutSergey Matyukevich
Userspace tools may hang on scan in the case when scan completion event is not returned by firmware. This patch implements the scan timeout to avoid such situation. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-11 22:53:55 +0000