summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2017-07-28rsi: Update peer notify command framePrameela Rani Garnepudi
TX command frame peer notify is updated to use common descriptor structure. MPDU density value added to the frame. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: remove unnecessary check for 802.11 management packetPrameela Rani Garnepudi
The function rsi_mgmt_pkt_to_core() is for passing the 802.11 management frames to mac80211. So, it is unnecessary to check again for the frame type 802.11 management in this function. It can be checked before passing to this function. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Update in tx command frame radio capabilitiesPrameela Rani Garnepudi
Radio capabilities frame is updated to use common descriptor structure. Also, few changes to this frame is done like hardware queues are increase to 12 from 8, default channel number is included. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: immediate wakeup bit and priority for TX command packetsPrameela Rani Garnepudi
For all TX command packets immediate wakeup bit needs to be set in descriptor. This will make sure device will wakeup if it is in any sleep state. Priority of the packet is also set. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: add common structures needed for command packetsPrameela Rani Garnepudi
All internal management packets (command packets) use some common fields and some packet specific fields for packet descriptors. This patch adds some common structures which are needed for all command packets. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Rename mutex tx_rxlock to the tx_lock.Karun Eagalapati
We have now added separate lock for Rx. This lock is used to protect tx path only Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: use separate mutex lock for receive threadKarun Eagalapati
Deadlock issue is observed during our stress tests. The root cause for the issue is same lock is used between tx and rx threads. This patch adds a separate mutex lock for rx thread to resolve the problem. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: SDIO Rx packet processing enhancementKarun Eagalapati
Newer firmware sends information about number of blocks through interrupt only. We don't need to read extra register for this. This patch adds needed driver changes for this enhancment. The change here is backward compatible Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Optimise sdio claim and release hostKarun Eagalapati
SDIO host is already claimed in our interrupt handler. Some lower level APIs claims host while performing SDIO read or write operations. Let's use sdio_irq_task variable to check if we are in interrupt context and claim/release the host accordingly. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: rename variable in_sdio_litefi_irqKarun Eagalapati
The variable in_sdio_litefi_irq is renamed to sdio_irq_task, as it is more relevant here. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: separate function for data packet descriptorPavani Muthyala
Data packet descriptor preparation code is moved a separate function. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: data packet descriptor enhancementsPavani Muthyala
This patch covers some enhancements in data packet descriptor preparation especially for EAPOL, multicast/broadcast packets. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: data packet descriptor code cleanupPavani Muthyala
Currently this descriptor is prepared with the help of __le16 pointer. This patch makes use of a structure to prepare the descriptor in a cleaner way. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: separate function for management packet descriptorPrameela Rani Garnepudi
Management descriptor preparation is move to a separate function as it will be called from a different context in upcoming patches. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: management frame descriptor preparation cleanupPavani Muthyala
Currently this descriptor is prepared with the help of __le16 pointer. This patch makes use of a structure to prepare the descriptor in a cleaner way. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: set immediate wakeup bitKarun Eagalapati
immediate wakeup bit is set while sending internal management frame to the firmware. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: choose correct endpoint based on queue.Karun Eagalapati
Till now only management packets were handled. Let's enhance the logic for choosing endpoint to accommodate other packets. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: rename USB endpoint macrosKarun Eagalapati
These endpoints are for WLAN and BT protocols. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: correct the logic of deriving queue numberAmitkumar Karwar
Maximum valid queue number is 0x5. So anding with 0x7 should be ok here. Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: USB tx headroom cleanupKarun Eagalapati
USB headroom is added while submitting the data to URB as per firmware's requirement. This logic is moved to rsi_usb_card_write() so that caller need not worry about it. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: card reset for USB interfaceKarun Eagalapati
We need to reset the chip in teardown path so that it can work next time when driver is loaded. This patch adds support for this reset configuration for USB. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: correct SDIO disconnect path handlingKarun Eagalapati
Sometimes it's observed that we get interrupt/Rx frame when device is already detached from mac80211. In this case couple of error messages are displayed in dmesg log. This patch corrects the order so that disconnection will happen cleanly Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: chip reset for SDIO interfaceKarun Eagalapati
We need to reset the chip in teardown path so that it can work next time when driver is loaded. This patch adds support for this reset configuration for SDIO. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: fix sdio card reset problemKarun Eagalapati
card reset is not working with recent kernels. Using host->card->ocr instead of host->ocr_avail solved the problem. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: changes in eeprom read framePrameela Rani Garnepudi
EEPROM read frame is sent during device initialization to read mac address. The format of the frame is modified in firmware to include eeprom length and offset. This frame does not return firmware version now. Also same frame is sent again to read rf type and band information. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: use BUILD_BUG_ON check for fsm_stateAmitkumar Karwar
Whenever new fsm_state enum element is added, fsm_state array also needs to be updated. If this change is missed, we may end up doing invalid access in array. BUILD_BUG_ON check will help to avoid this problem. Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.14. Major changes: ath10k * preparation for wcn3990 support
2017-07-27brcmfmac: fix memleak due to calling brcmf_sdiod_sgtable_alloc() twiceArend Van Spriel
Due to a bugfix in wireless tree and the commit mentioned below a merge was needed which went haywire. So the submitted change resulted in the function brcmf_sdiod_sgtable_alloc() being called twice during the probe thus leaking the memory of the first call. Cc: stable@vger.kernel.org # 4.6.x Fixes: 4d7928959832 ("brcmfmac: switch to new platform data") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27brcmfmac: Don't grow SKB by negative sizeDaniel Stone
The commit to rework the headroom check in start_xmit() now calls pxskb_expand_head() unconditionally if the header is CoW. Unfortunately, it does so with the delta between the extant headroom and the header length, which may be negative if there is already sufficient headroom. pskb_expand_head() does allow for size being 0, in which case it just copies, so clamp the header delta to zero. Opening Chrome (and all my tabs) on a PCIE device was enough to reliably hit this. Fixes: 270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()") Signed-off-by: Daniel Stone <daniels@collabora.com> Cc: Arend Van Spriel <arend.vanspriel@broadcom.com> Cc: James Hughes <james.hughes@raspberrypi.org> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27wl1251: add a missing spin_lock_init()Cong Wang
This fixes the following kernel warning: [ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745 [ 5668.771850] lock: 0xce63ef20, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G W 4.12.0-03002-gec979a4-dirty #40 [ 5668.772796] Hardware name: Nokia RX-51 board [ 5668.773071] Workqueue: phy1 wl1251_irq_work [ 5668.773345] [<c010c9e4>] (unwind_backtrace) from [<c010a274>] (show_stack+0x10/0x14) [ 5668.773803] [<c010a274>] (show_stack) from [<c01545a4>] (do_raw_spin_lock+0x6c/0xa0) [ 5668.774230] [<c01545a4>] (do_raw_spin_lock) from [<c06ca578>] (_raw_spin_lock_irqsave+0x10/0x18) [ 5668.774658] [<c06ca578>] (_raw_spin_lock_irqsave) from [<c048c010>] (wl1251_op_tx+0x38/0x5c) [ 5668.775115] [<c048c010>] (wl1251_op_tx) from [<c06a12e8>] (ieee80211_tx_frags+0x188/0x1c0) [ 5668.775543] [<c06a12e8>] (ieee80211_tx_frags) from [<c06a138c>] (__ieee80211_tx+0x6c/0x130) [ 5668.775970] [<c06a138c>] (__ieee80211_tx) from [<c06a3dbc>] (ieee80211_tx+0xdc/0x104) [ 5668.776367] [<c06a3dbc>] (ieee80211_tx) from [<c06a4af0>] (__ieee80211_subif_start_xmit+0x454/0x8c8) [ 5668.776824] [<c06a4af0>] (__ieee80211_subif_start_xmit) from [<c06a4f94>] (ieee80211_subif_start_xmit+0x30/0x2fc) [ 5668.777343] [<c06a4f94>] (ieee80211_subif_start_xmit) from [<c0578848>] (dev_hard_start_xmit+0x80/0x118) ... by adding the missing spin_lock_init(). Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27rtlwifi: kfree entry until after entry->bssid has been accessedColin Ian King
The current code kfree's entry and then dereferences it by accessing entry->bssid. Avoid the dereference-after-free by moving the kfree after the access to entry->bssid. Detected by CoverityScan, CID#1448600 ("Read from pointer after free") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-27mwifiex: correct channel stat buffer overflowsBrian Norris
mwifiex records information about various channels as it receives scan information. It does this by appending to a buffer that was sized to the max number of supported channels on any band, but there are numerous problems: (a) scans can return info from more than one band (e.g., both 2.4 and 5 GHz), so the determined "max" is not large enough (b) some firmware appears to return multiple results for a given channel, so the max *really* isn't large enough (c) there is no bounds checking when stashing these stats, so problems (a) and (b) can easily lead to buffer overflows Let's patch this by setting a slightly-more-correct max (that accounts for a combination of both 2.4G and 5G bands) and adding a bounds check when writing to our statistics buffer. Due to problem (b), we still might not properly report all known survey information (e.g., with "iw <dev> survey dump"), since duplicate results (or otherwise "larger than expected" results) will cause some truncation. But that's a problem for a future bugfix. (And because of this known deficiency, only log the excess at the WARN level, since that isn't visible by default in this driver and would otherwise be a bit too noisy.) Fixes: bf35443314ac ("mwifiex: channel statistics support for mwifiex") Cc: <stable@vger.kernel.org> Cc: Avinash Patil <patila@marvell.com> Cc: Xinming Hu <huxm@marvell.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-25drivers/net: Fix ptr_ret.cocci warnings.Tonghao Zhang
we can use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR 1. drivers/net/appletalk/ipddp.c 2. drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTARTJohannes Berg
A hardware/firmware error may happen at any point in time. In particular, it might happen while mac80211 is in the middle of a flow. We observed the following situation: * mac80211 is in authentication flow, in ieee80211_prep_connection() * iwlwifi firmware crashes, but no error can be reported at this precise point (mostly because the driver method is void, but even if it wasn't we'd just shift to a race condition) * mac80211 continues the flow, trying to add the AP station * iwlwifi has already set its internal restart flag, and so thinks that adding the station is part of the restart and already set up, so it uses the information that's supposed to already be in the struct This can happen with any flow in mac80211 and with any information we try to preserve across hardware restarts. To fix this, only set a new HW_RESTART_REQUESTED flag and translate that to IN_HW_RESTART once mac80211 actually starts the restart by calling our start() method. As a consequence, any mac80211 flow in progress at the time of the restart will properly finish (certainly with errors), before the restart is attempted. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195299. Reported-by: djagoo <dev@djagoo.io> Reported-by: Łukasz Siudut <lsiudut@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: mvm: handle IBSS probe_queue in a few missing placesLuca Coelho
When IBSS was implemented for DQA, we missid a few places where it should be handled in the same way as AP. Fixes: ee48b72211f8 ("iwlwifi: mvm: support ibss in dqa mode") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: fix tracing when tx only is enabledEmmanuel Grumbach
iwl_trace_data is somewhat confusing. It returns a bool that tells if the payload of the skb should be added to the tx_data event. If it returns false, then the payload of the skb is added to the tx event. The purpose is to be able to start tracing with -e iwlwifi and record non-data packets only which saves bandwidth. Since EAPOLs are important, seldom and not real data packet (despite being WiFi data packets), they are included in tx event and thus iwl_trace_data returns false on those. This last part was buggy, and because of that, all the data packets were included in the tx event. Fix that. Fixes: 0c4cb7314d15 ("iwlwifi: tracing: decouple from mac80211") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: missing error code in iwl_trans_pcie_alloc()Dan Carpenter
We don't set the error code here so we end up returning ERR_PTR(0) which is NULL. The caller doesn't expect that so it results in a NULL dereference. Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: mvm: fix a NULL pointer dereference of error in recoveryEmmanuel Grumbach
Sometimes, we can have an firmware crash while trying to recover from a previous firmware problem. When that happens, lots of things can go wrong. For example the stations don't get added properly to mvm->fw_id_to_mac_id. Mac80211 tries to stop A-MPDU upon reconfig but in case of a firmware crash we will bail out fairly early and in the end, we won't delete the A-MPDU Rx timeout. When that timer expired after a double firmware crash, we end up dereferencing mvm->fw_id_to_mac_id[sta_id] which is NULL. Fixes: 10b2b2019d81 ("iwlwifi: mvm: add infrastructure for tracking BA session in driver") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: pcie: fix unused txq NULL pointer dereferenceMordechai Goodstein
Before TVQM, all TX queues were allocated straight at init. With TVQM, queues are allocated on demand and hence we need to check if a queue exists before dereferencing it. Fixes: 66128fa08806 ("iwlwifi: move to TVQM mode") Signed-off-by: Mordechai Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21iwlwifi: dvm: prevent an out of bounds accessEmmanuel Grumbach
iwlagn_check_ratid_empty takes the tid as a parameter, but it doesn't check that it is not IWL_TID_NON_QOS. Since IWL_TID_NON_QOS = 8 and iwl_priv::tid_data is an array with 8 entries, accessing iwl_priv::tid_data[IWL_TID_NON_QOS] is a bad idea. This happened in iwlagn_rx_reply_tx. Since iwlagn_check_ratid_empty is relevant only to check whether we can open A-MPDU, this flow is irrelevant if tid is IWL_TID_NON_QOS. Call iwlagn_check_ratid_empty only inside the if (tid != IWL_TID_NON_QOS) a few lines earlier in the function. Cc: <stable@vger.kernel.org> Reported-by: Seraphime Kirkovski <kirkseraph@gmail.com> Tested-by: Seraphime Kirkovski <kirkseraph@gmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-07-21Revert "rtlwifi: btcoex: rtl8723be: fix ant_sel not work"Larry Finger
This reverts commit f95d95a7cd5514549dcf6ba754f0ee834cce3e1f. With commit f95d95a7cd55 ("rtlwifi: btcoex: rtl8723be: fix ant_sel not work"), the kernel has a NULL pointer dereference oops. This content and the proper fix will be included in a later patch. Fixes: f95d95a7cd55 ("rtlwifi: btcoex: rtl8723be: fix ant_sel not work") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-21brcmfmac: fix regression in brcmf_sdio_txpkt_hdalign()Arend Van Spriel
Recent change in brcmf_sdio_txpkt_hdalign() changed the behavior and now always returns 0. This resulted in a regression which basically renders the device useless. Fixes: 270a6c1f65fe ("brcmfmac: rework headroom check in .start_xmit()") Reported-by: S. Gilles <sgilles@math.umd.edu> Tested-by: S. Gilles <sgilles@math.umd.edu> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-07-19rtlwifi: remove useless codeGustavo A. R. Silva
Remove useless local variables last_read_point and last_txw_point and the code related. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-19wireless: airo: remove unnecessary static in writerids()Gustavo A. R. Silva
Remove unnecessary static on local function pointer _writer_. Such pointer is initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the object file size. This issue was detected using Coccinelle and the following semantic patch: @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; In the following log you can see a significant difference in the object file size. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 113797 19152 1216 134165 20c15 drivers/net/wireless/cisco/airo.o after: text data bss dec hex filename 113881 19096 1152 134129 20bf1 drivers/net/wireless/cisco/airo.o Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18wireless: iwlegacy: Constify attribute_group structures.Arvind Yadav
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18wireless: iwlegacy: constify attribute_group structures.Arvind Yadav
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18wireless: ipw2100: constify attribute_group structures.Arvind Yadav
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-18wireless: ipw2200: constify attribute_group structures.Arvind Yadav
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13rt2x00: make const array glrt_table staticColin Ian King
Don't populate array glrt_table on the stack but make it static. Makes the object code a smaller by over 670 bytes: Before: text data bss dec hex filename 131772 4733 0 136505 21539 rt2800lib.o After: text data bss dec hex filename 131043 4789 0 135832 21298 rt2800lib.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 11:59:28 +0000