summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2017-06-21rtlwifi: Revise special packet notification to be readable format.Ping-Ke Shih
We extend types of special packets to a enumeration from boolean value. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: Add TX report and disable key to force wait until report acked.Ping-Ke Shih
When using EAPOL to do a PTK rekey, there is a possible race condition. When msg 3/4 is received, the supplicant will send msg 4/4 and install the new key immediately; however, the driver must make sure that msg 4/4 is sent before installing the new key. We use TX report to ensure it is sent. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: extend debug_comp to u64Ping-Ke Shih
The number of debugging conditions now exceeds the capabilities of a 32-bit word. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: Correct power save capability while init mac80211Ping-Ke Shih
Since the driver itself will enter power saving mode dynamically according to the traffic, we set hw capability SUPPORTS_PS and SUPPORTS_DYNAMIC_PS in case of fwctrl_lps. The process IEEE80211_CONF_CHANGE_PS in op_config is used by SW-LPS only, so we add constraints to avoid errors. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: vincent_fann <vincent_fann@realtek.com> Signed-off-by: shaofu <shaofu@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: btcoex: rtl8723be: fix ant_sel not workPing-Ke Shih
To make ant_sel work, we should call power_on_setting to set antenna correctly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: btcoex: set correct interface type and parameter.Ping-Ke Shih
This commit fixies two problems. The first one is interface types (e.g. PCI) that are used to switch antenna, and the second is to add wifi_only parameter to give correct state. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: btcoex: call bind to setup btcoexPing-Ke Shih
New btcoex add a function 'bind' to connect adapter, so we should call it during initializing. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rsi: add tx frame for common device configurationPrameela Rani Garnepudi
After successful loading of firmware, a CARD READY indication is received by host. Common device configuration parameters are sent to the device after this. It includes information like device operating mode (Wi-Fi alone or BT coex), power save related parameters, GPIO information etc. As device supports BT coex, this frame is send in COEX queue initially. Based on the operating mode, CARD READY indication is received from each protocol module in firmware i.e. WLAN, BT. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rsi: configure new boot parameters to devicePrameela Rani Garnepudi
Boot parameters are changed in new firmware. Also three new sdio sleep parameters are added for ultra low power save. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rsi: receive path enhancement for RS9113Prameela Rani Garnepudi
RS9113 chipset supports Coex feature. Initial frame exchanges during device initialization happens on coex queue. This patch adds the handling for coex queue. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rsi: Register interrupt handler before firmware loadPrameela Rani Garnepudi
Before firmware load, sometimes false interrupts are received. System hang is observed if interrupt handler is not registered to receive these interrupts. Hence interrupt handler registration is moved before firmware load. We will drop these false interrupts as these are not from the device. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rsi: use enum for FSM statesAmitkumar Karwar
Currently macros are used for FSM states. We will replace it with enum so that new state can be added easily without worrying about macro value. Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rsi: add usb RS9113 chipset supportPrameela Rani Garnepudi
usb device id and vendor id for RS9113 chipset are included. So it can be used through usb interface. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21mwifiex: debugfs: remove redunant check of mwifiex_dfs_dirShawn Lin
debugfs_remove already check mwifiex_dfs_dir, so remove it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21mwifiex: fixes the unexpected be printed log by defaultCaesar Wang
This patch uses WARN level is not printed by default. In some cases, some boards have always met the unused log be printed as follows. ... [23193.523182] mwifiex_pcie 0000:01:00.0: mwifiex_get_cfp: cannot find cfp by band 2 & channel=13 freq=0 [23378.633684] mwifiex_pcie 0000:01:00.0: mwifiex_get_cfp: cannot find cfp by band 2 & channel=13 freq=0 Due to we used the wifi default area was US and didn't support 12~14 channels. As Frequencies: * 2412 MHz [1] (30.0 dBm) * 2417 MHz [2] (30.0 dBm) * 2422 MHz [3] (30.0 dBm) * 2427 MHz [4] (30.0 dBm) * 2432 MHz [5] (30.0 dBm) * 2437 MHz [6] (30.0 dBm) * 2442 MHz [7] (30.0 dBm) * 2447 MHz [8] (30.0 dBm) * 2452 MHz [9] (30.0 dBm) * 2457 MHz [10] (30.0 dBm) * 2462 MHz [11] (30.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Also, as the commit 1b499cb72f26b ("mwifiex: disable channel filtering feature in firmware"), it proved to be a feature to get better scan result from overlapping channel. Even there could be AP from overlapping channel (might be 12/13/14 in this case), it will be filtered depend on reg domain rules. e.g: ... if (ch->flags & IEEE80211_CHAN_DISABLED) continue; So it should not been an ERROR, use the WARN level to instead it for now. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Acked-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: fix REG_USTIME_TSF register definitionKevin Lo
The REG_USTIME_TSF (US Time Tuning for TSF) definition of Realtek chips should be 0x55C. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21brcmfmac: Use separate firmware for revision 0 of the brcm43430 chipHans de Goede
The brcm43430 chip needs different firmware files for chip revision 0 and 1. The file currently in linux-firmware is for revision 1 only. This commit makes brcmfmac request brcmfmac43430a0-sdio.bin instead of brcmfmac43430-sdio.bin for revision 0 chips. Note that the behavior for revision 1 chips is not changed, ideally those would load brcmfmac43430a1-sdio.bin, but that will break existing setups. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21wil6210: remove ioctl interfaceMaya Erez
Wireless drivers should not be using ioctl interface, hence remove this interface for wil6210 driver. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21wil6210: add support for PCIe D3hot in system suspendMaya Erez
In order to preserve the connection in suspend/resume flow, wil6210 host allows going to PCIe D3hot state in suspend, instead of performing a full wil6210 device reset. This requires the platform ability to initiate wakeup in case of RX data. To check that, a new platform API is added. In addition, add cfg80211 suspend/resume callbacks implementation. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21wil6210: prevent platform callbacks after uninitDedy Lansky
After calling platform_ops.uninit() it is still possible to invoke platform callbacks. To prevent this, zero platform_ops right after invoking uninit. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21ath10k: set rxnss_override for QCA9888Sven Eckelmann
QCA9888 supports VHT80 with 2x2. But it only support 1x1 with VHT160 or VHT80+80. Inform userspace and the the QCA firmware about that limitation whenever VHT80+80 or VHT160 is configured. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [kvalo@qca.qualcomm.com: use hw_params] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21ath10k: configure rxnss_override for QCA9984Ben Greear
QCA9984 hardware can do 4x4 at 80Mhz, but only 2x2 at 160Mhz. First, report this to user-space by setting the max-tx-speed and max-rx-speed vht capabilities. Second, if the peer rx-speed is configured, and if we are in 160 or 80+80 mode, and the peer rx-speed matches the max speed for 2x2 or 1x1 at 160Mhz (long guard interval), then use that info to set the peer_bw_rxnss_override appropriately. Without this, a 9984 firmware will not use 2x2 ratesets when transmitting to peer (it will be stuck at 1x1), because the firmware would not have configured the rxnss_override. Signed-off-by: Ben Greear <greearb@candelatech.com> [sven.eckelmann@openmesh.com: rebase, cleanup, drop 160Mhz workaround cleanup] Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [kvalo@qca.qualcomm.com: use hw_params, rename the title] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-21ath10k: use complete VHT chan width for 160MHz workaroundBen Greear
The ath10k firmware doesn't announce its VHT channel width capabilities in the vht_cap information from the "service ready event" arguments. The driver must therefore check whether the 160MHz short GI bit is set and whether the driver still doesn't set the bits for the 160/80+80 MHz capabilities. The two bits for the channel width are a two bit integer and not two separate bits which cannot be parsed without the knowledge of the other bit. Using IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ (b10..) as a mask for this task doesn't make any sense. The correct mask for the VHT channel width should be used instead to make this check more readable. Signed-off-by: Ben Greear <greearb@candelatech.com> [sven.eckelmann@openmesh.com: separate 160Mhz workaround cleanup, add commit message] Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-20Merge tag 'wireless-drivers-for-davem-2017-06-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.12 Two important fixes for brcmfmac. The rest of the brcmfmac patches are either code preparation and fixing a new build warning. brcmfmac * fix a NULL pointer dereference during resume * fix a NULL pointer dereference with USB devices, a regression from v4.12-rc1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20net: manual clean code which call skb_put_[data:zero]yuan linyu
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20net: replace more place to skb_put_[data:zero]yuan linyu
spatch file, @@ expression skb, len, data; type t; @@ -memcpy((t *)skb_put(skb, len), data, len); +skb_put_data(skb, data, len); @@ identifier p; expression skb, len, data; type t; @@ -p = (t *)memset(skb_put(skb, len), data, len); +p = skb_put_zero(skb, len); @@ expression skb, len, data; type t; @@ -memcpy((t *)__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ identifier p; expression skb, len, data; type t; @@ -p = (t *)memset(__skb_put(skb, len), data, len); +p = __skb_put_zero(skb, len); Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2()Arend Van Spriel
This fixes the following warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c: In function 'brcmf_usb_probe_phase2': drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1198:2: warning: 'devinfo' may be used uninitialized in this function [-Wmaybe-uninitialized] mutex_unlock(&devinfo->dev_init_lock); Fixes: 6d0507a777fb ("brcmfmac: add parameter to pass error code in firmware callback") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-16ath6kl: fix spelling mistake: "Indicat" -> "Indicate"Colin Ian King
Trivial fix to spelling mistake in ath6kl_dbg debug message Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Steve deRosier <derosier@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-16ath10k: add per chain RSSI reportingNorik Dzhandzhapanyan
Report per chain RSSI to mac80211. Signed-off-by: Norik Dzhandzhapanyan <norikd@gmail.com> [kvalo@qca.qualcomm.com: fix conflicts and style] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-16ath10k: define structures for CE ctrl/misc registerSarada Prasanna Garnayak
Define structures for the copy engine ctrl/misc registers, that includes CE CMD halt, watermark source, watermark destination, host IE ring, source, destination and dmax ring. This adds support to avoid the conditional compilation, code optimization and dynamic configuration of the copy engine register map for respective hardware bus interface. Signed-off-by: Sarada Prasanna Garnayak <c_sgarna@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-06-15brcmfmac: fix brcmf_fws_add_interface() for USB devicesArend Van Spriel
USB devices rely on queuing functionality provided by the fwsignal module regardless the mode fwsignal is operating in. For this some data structure needs to be reserved which is tied to the interface, which is done by brcmf_fws_add_interface(). However, it checks the mode. Replace that by checking result from brcmf_fws_queue_skbs(). Otherwise the driver will crash in a null pointer dereference when data is transmitted on the interface. Fixes: fc0471e3e884 ("brcmfmac: ignore interfaces when fwsignal is disabled") Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-15brcmfmac: unbind all devices upon failure in firmware callbackArend Van Spriel
When request firmware fails, brcmf_ops_sdio_remove is being called and brcmf_bus freed. In such circumstancies if you do a suspend/resume cycle the kernel hangs on resume due a NULL pointer dereference in resume function. So in brcmf_sdio_firmware_callback() we need to unbind the driver from both sdio_func devices when firmware load failure is indicated. Cc: stable@vger.kernel.org # 4.9.x- Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-15brcmfmac: use firmware callback upon failure to loadArend Van Spriel
When firmware loading failed the code used to unbind the device provided by the calling code. However, for the sdio driver two devices are bound and both need to be released upon failure. The callback has been extended with parameter to pass error code so add that in this commit upon firmware loading failure. Cc: stable@vger.kernel.org # 4.9.x- Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-15brcmfmac: add parameter to pass error code in firmware callbackArend Van Spriel
Extend the parameters in the firmware callback so it can be called upon success and failure. This allows the caller to properly clear all resources in the failure path. Right now the error code is always zero, ie. success. Cc: stable@vger.kernel.org # 4.9.x- Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13networking: use skb_put_zero()Johannes Berg
Use the recently introduced helper to replace the pattern of skb_put() && memset(), this transformation was done with the following spatch: @@ identifier p; expression len; expression skb; @@ -p = skb_put(skb, len); -memset(p, 0, len); +p = skb_put_zero(skb, len); Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13wlcore: spi: remove unnecessary variableGustavo A. R. Silva
Remove unnecessary variable and refactor the code. Addresses-Coverity-ID: 1365000 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13wlcore: add wl1285 compatibleSebastian Reichel
Motorola Droid 4 uses a WL 1285C. With differences between chips not being public let's add explicit binding for wl1285 instead of relying on wl1283 being very similar. Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13mwifiex: Replace semaphore async_sem with mutexBinoy Jayan
The semaphore 'async_sem' is used as a simple mutex, so it should be written as one. Semaphores are going away in the future. Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: let btcoex get wifi rssi and link statusYan-Hsuan Chuang
Instead of rssi status, the btcoex also needs to get the link status of the wifi. In addition, some of the rssi status can be merged into link status. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: remove unused display functionsYan-Hsuan Chuang
These display functions are useless and will not be called in the future. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: bind BT coex information with wifi driverYan-Hsuan Chuang
When initializing, gather BT information in struct btcoexist and provide them to wifi driver. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: hook external functions for newer chipsYan-Hsuan Chuang
Hook the external functions for newer ICs such as 8821a and 8192e. Rename ex_halbtc8192e2ant_halt_notify to ex_btc8192e2ant_halt_notify. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: add settings before the hardware is readyYan-Hsuan Chuang
When the hardware is turned on and in the initialization stage, the PTA circuit is unstable. Hence we need to force some hardware settings to make sure the PTA circuit work correctly, otherwise it may affect the user's experience. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: hook external PnP notify by chip for wifi driverYan-Hsuan Chuang
Hook the chip-specific PnP notify functions for the wifi driver to notify btcoexistence. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-13 04:00:13 +0000