summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2019-09-24mt76: mt7615: fix mt7615 firmware path definitionsLorenzo Bianconi
mt7615 patch/n9/cr4 firmwares are available in mediatek folder in linux-firmware repository. Because of this mt7615 won't work on regular distributions like Ubuntu. Fix path definitions. Moreover remove useless firmware name pointers and use definitions directly Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-24rtw88: configure firmware after HCI startedYan-Hsuan Chuang
After firmware has been downloaded, driver should send some information to it through H2C commands. Those H2C commands are transmitted through TX path. But before HCI has been started, the TX path is not working completely. Such as PCI interfaces, the interrupts are not enabled, hence TX interrupts will not be issued after H2C skb has been DMAed to the device. And the H2C skbs will not be released until the device is powered off. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-23ath10k: fix memory leakNavid Emamdoost
In ath10k_usb_hif_tx_sg the allocated urb should be released if usb_submit_urb fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23ath10k: remove the warning of sdio not full supportWen Gong
Recently, it has the basic feature of sdio tested success, so remove it. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23ath: Use dev_get_drvdata where possibleChuhong Yuan
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23ath: fix various spelling mistakesColin Ian King
There are a bunch of spelling mistakes in two ath drivers, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23ath10k: fix missing checks for bmi reads and writesKangjie Lu
ath10k_bmi_write32 and ath10k_bmi_read32 can fail. The fix checks their statuses to avoid potential undefined behaviors. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23ath10k: Add support to provide higher range mem chunks in wmi init commandSurabhi Vishnoi
With the current implementation of wmi init command, there is no provision for the host driver to provide mem chunks addresses with more than 32-bit, to the firmware. WCN3990 is a 35-bit target and can accept mem chunks addresses which are above 32-bit. If firmware supports address range more than 32 bit, it advertises the support by setting the WMI_SERVICE_EXTEND_ADDRESS service. Based on this service fill the upper bits of paddr while providing the mem chunks in the wmi init command. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23ath10k: Add peer param map for tlv and non-tlvRakesh Pillai
The peer param id for PEER_PARAM_USE_FIXED_PWR is different for tlv and non-tlv firmware. This causes incorrect peer param to be set by the driver to the firmware(tlv/non-tlv). Create seperate peer param map for tlv and non-tlv firmware and attach the peer param id based on the firmware type during the init. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21ath10k: Enable MSA region dump support for WCN3990Govind Singh
MSA memory region caries the hw descriptors information. Dump MSA region in core dump as this is very helpful in debugging hw issues. Testing: Tested on WCN3990 HW Tested FW: WLAN.HL.3.1-00959-QCAHLSWMTPLZ-1 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21ath10k: Add xo calibration support for wifi rf clockGovind Singh
PMIC XO is the clock source for wifi rf clock in integrated wifi chipset ex: WCN3990. Due to board layout errors XO frequency drifts can cause wifi rf clock inaccuracy. XO calibration test tree in Factory Test Mode is used to find the best frequency offset(for example +/-2KHz )by programming XO trim register. This ensure system clock stays within required 20 ppm WLAN rf clock. Retrieve the xo trim offset via system firmware (e.g., device tree), especially in the case where the device doesn't have a useful EEPROM on which to store the calibrated XO offset (e.g., for integrated Wifi). Calibrated XO offset is sent to fw, which compensate the clock drift by programing the XO trim register. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21zd1211rw: zd_usb: Use "%zu" to format size_tGeert Uytterhoeven
On 32-bit: drivers/net/wireless/zydas/zd1211rw/zd_usb.c: In function ‘check_read_regs’: drivers/net/wireless/zydas/zd1211rw/zd_def.h:18:25: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 6 has type ‘size_t’ {aka ‘unsigned int’} [-Wformat=] dev_printk(level, dev, "%s() " fmt, __func__, ##args) ^~~~~~~ drivers/net/wireless/zydas/zd1211rw/zd_def.h:22:4: note: in expansion of macro ‘dev_printk_f’ dev_printk_f(KERN_DEBUG, dev, fmt, ## args) ^~~~~~~~~~~~ drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1635:3: note: in expansion of macro ‘dev_dbg_f’ dev_dbg_f(zd_usb_dev(usb), ^~~~~~~~~ drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1636:51: note: format string is defined here "error: actual length %d less than expected %ld\n", ~~^ %d Fixes: 84b0b66352470e64 ("zd1211rw: zd_usb: Use struct_size() helper") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21rtw88: pci: release tx skbs DMAed when stopYan-Hsuan Chuang
Interrupt is disabled to stop PCI, which means the skbs queued for each TX ring will not be released via DMA interrupt. To avoid those skbs remained being left in the skb queue until PCI has been removed, driver needs to release skbs by itself. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-21rtw88: pci: extract skbs free routine for trx ringsYan-Hsuan Chuang
These skbs free routines could be used when driver wants to stop PCI bus, because some of the skbs remained in the queue may not have been returned via DMA interrupt. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-19iwlwifi: mvm: fix build w/o CONFIG_THERMALJohannes Berg
Without CONFIG_THERMAL, the driver fails to link as it calls iwl_mvm_send_temp_report_ths_cmd() unconditionally. Fix this by making that function available, but do almost nothing but send the empty firmware command to enable CT-kill reporting. While at it, also fix that function itself to not error out when the thermal zone hasn't been initialized, but instead just send the empty firmware command in this case as well. Fixes: 242d9c8b9a93 ("iwlwifi: mvm: use FW thermal monitoring regardless of CONFIG_THERMAL") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: fix spelling mistake "eanble" -> "enable"Colin Ian King
There is a spelling mistake in a ath10k_warn warning message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: fix latency issue for QCA988xMiaoqing Pan
Bad latency is found on QCA988x, the issue was introduced by commit 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug"). If uart_pin_workaround is false, this change will set uart pin even if uart_print is false. Tested HW: QCA9880 Tested FW: 10.2.4-1.0-00037 Fixes: 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug") Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: add cleanup in ath10k_sta_state()Wenwen Wang
If 'sta->tdls' is false, no cleanup is executed, leading to memory/resource leaks, e.g., 'arsta->tx_stats'. To fix this issue, perform cleanup before go to the 'exit' label. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: revalidate the msa region coming from firmwareGovind Singh
driver sends QMI_WLFW_MSA_INFO_REQ_V01 QMI request to firmware and in response expects range of addresses and size to be mapped. Add condition to check whether addresses in response falls under valid range otherwise return failure. Testing: Tested on WCN3990 HW Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: use ath10k_pci_soc_ functions for all warm_reset instancesTomislav Požega
Use ath10k_pci_soc_read32 / ath10k_pci_soc_write32 functions for the rest of warm_reset functions. Until now these have been used only for ath10k_pci_warm_reset_si0, but since they already exist it makes sense to simplify code a bit. Runtime tested with QCA9862. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: Use ARRAY_SIZEVasyl Gomonovych
fix coccinelle warning, use ARRAY_SIZE Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: avoid leaving .bss_info_changed prematurelySven Eckelmann
ath10k_bss_info_changed() handles various events from the upper layers. It parses the changed bitfield and then configures the driver/firmware accordingly. Each detected event is handled in a separate scope which is independent of each other - but in the same function. The commit f279294e9ee2 ("ath10k: add support for configuring management packet rate") changed this behavior by returning from this function prematurely when some precondition was not fulfilled. All new event handlers added after the BSS_CHANGED_BASIC_RATES event handler would then also be skipped. Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: Use standard bulk clock API in snocBjorn Andersson
No frequency is currently specified for the single clock defined in the snoc driver, so the clock wrappers reimplements the standard bulk API provided by the clock framework. Change to this. The single clock defined is marked as optional so this version of the get API is used, but might need to be reconsidered in the future. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: Use standard regulator bulk API in snocBjorn Andersson
The regulator_get_optional() exists for cases where the driver needs do behave differently depending on some regulator supply being present or not, as we don't use this we can use the standard regulator_get() and rely on its handling of unspecified regulators. While the driver currently doesn't specify any loads the regulator framework was updated last year to only account for load of enabled regulators, so should the need appear it's better to apply load numbers during initialization that dynamically. With this the regulator wrappers have been reduced the become identical to the standard bulk API provided by the regulator framework, so use these instead of rolling our own. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: snoc: skip regulator operationsBjorn Andersson
The regulator operations is trying to set a voltage to a fixed value, by giving some wiggle room. But some board designs specifies regulator voltages outside this limited range. One such example is the Lenovo Yoga C630, with vdd-3.3-ch0 in particular specified at 3.1V. But consumers with fixed voltage requirements should just rely on the board configuration to provide the power at the required level, so this code should be removed. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: Fix HOST capability QMI incompatibilityBjorn Andersson
The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI message") served the purpose of supporting the new and extended HOST capability QMI message. But while the new message adds a slew of optional members it changes the data type of the "daemon_support" member, which means that older versions of the firmware will fail to decode the incoming request message. There is no way to detect this breakage from Linux and there's no way to recover from sending the wrong message (i.e. we can't just try one format and then fallback to the other), so a quirk is introduced in DeviceTree to indicate to the driver that the firmware requires the 8bit version of this message. Cc: stable@vger.kernel.org Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: Check if station exists before forwarding tx airtime reportHauke Mehrtens
It looks like the FW on QCA9984 already reports the tx airtimes before the station is added to the peer entry. The peer entry is created in ath10k_peer_map_event() just with the vdev_id and the ethaddr, but not with a station entry, this is added later in ath10k_peer_create() in callbacks from mac80211. When there is no sta added to the peer entry, this function fails because it calls ieee80211_sta_register_airtime() with NULL. This was reported in OpenWrt some time ago: https://bugs.openwrt.org/index.php?do=details&task_id=2414 This commit should fix this crash: [ 75.991714] Unable to handle kernel paging request at virtual address fffff9e8 [ 75.991756] pgd = c0204000 [ 75.997955] [fffff9e8] *pgd=5fdfd861, *pte=00000000, *ppte=00000000 [ 76.000537] Internal error: Oops: 37 [#1] SMP ARM [ 76.006686] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat chaoskey fuse sch_cake sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 [ 76.059974] cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ip_gre gre ifb sit tunnel4 ip_tunnel tun vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha1_generic md5 md4 [ 76.130634] usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat crc32c_generic [ 76.154772] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.132 #0 [ 76.177001] Hardware name: Generic DT based system [ 76.182990] task: c0b06d80 task.stack: c0b00000 [ 76.187832] PC is at ieee80211_sta_register_airtime+0x24/0x148 [mac80211] [ 76.192211] LR is at ath10k_htt_t2h_msg_handler+0x678/0x10f4 [ath10k_core] [ 76.199052] pc : [<bf75bfac>] lr : [<bf83e8b0>] psr: a0000113 [ 76.205820] sp : c0b01d54 ip : 00000002 fp : bf869c0c [ 76.211981] r10: 0000003c r9 : dbdca138 r8 : 00060002 [ 76.217192] r7 : 00000000 r6 : dabe1150 r5 : 00000000 r4 : dbdc95c0 [ 76.222401] r3 : 00000000 r2 : 00060002 r1 : 00000000 r0 : 00000000 [ 76.229003] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 76.235509] Control: 10c5787d Table: 5c94006a DAC: 00000051 [ 76.242716] Process swapper/0 (pid: 0, stack limit = 0xc0b00210) [ 76.248446] Stack: (0xc0b01d54 to 0xc0b02000) [ 76.254532] 1d40: dbdc95c0 00000000 dabe1150 [ 76.258808] 1d60: 00000001 dabe1150 dbdca138 0000003c bf869c0c bf83e8b0 00000002 c0314b10 [ 76.266969] 1d80: dbdc9c70 00000001 00000001 dabe114c 00010000 00000000 dbdcd724 bf88f3d8 [ 76.275126] 1da0: c0310d28 db393c00 dbdc95c0 00000000 c0b01dd0 c07fb4c4 dbdcd724 00000001 [ 76.283286] 1dc0: 00000022 bf88b09c db393c00 00000022 c0b01dd0 c0b01dd0 00000000 dbdcc5c0 [ 76.291445] 1de0: bf88f04c dbdcd654 dbdcd71c dbdc95c0 00000014 dbdcd724 dbdcc5c0 00000005 [ 76.299605] 1e00: 0004b400 bf85c360 00000000 bf87101c c0b01e24 00000006 00000000 dbdc95c0 [ 76.307764] 1e20: 00000001 00000040 0000012c c0b01e80 1cf51000 bf85c448 dbdcd440 dbdc95c0 [ 76.315925] 1e40: dbdca440 ffffa880 00000040 bf88cb68 dbdcd440 00000001 00000040 ffffa880 [ 76.324084] 1e60: c0b02d00 c06d72e0 dd990080 c0a3f080 c0b255dc c0b047e4 c090afac c090e80c [ 76.332244] 1e80: c0b01e80 c0b01e80 c0b01e88 c0b01e88 dd4cc200 00000000 00000003 c0b0208c [ 76.340405] 1ea0: c0b02080 40000003 ffffe000 00000100 c0b02080 c03015c8 00000000 00000001 [ 76.348564] 1ec0: dd408000 c0a38210 c0b2c7c0 0000000a ffffa880 c0b02d00 c07fb764 00200102 [ 76.356723] 1ee0: dd4cc268 c0a3e414 00000000 00000000 00000001 dd408000 de803000 00000000 [ 76.364883] 1f00: 00000000 c03247cc c0a3e414 c0368f1c c0b03f60 c0b153cc de80200c de802000 [ 76.373042] 1f20: c0b01f48 c0301488 c0308630 60000013 ffffffff c0b01f7c 00000000 c0b00000 [ 76.381204] 1f40: 00000000 c030c08c 00000001 00000000 00000000 c0315180 ffffe000 c0b03cc0 [ 76.389363] 1f60: c0b03c70 00000000 00000000 c0a2da28 00000000 00000000 c0b01f90 c0b01f98 [ 76.397522] 1f80: c030862c c0308630 60000013 ffffffff 00000051 00000000 ffffe000 c035dd18 [ 76.405681] 1fa0: 000000bf c0b03c40 00000000 c0b2c000 dddfce80 c035e060 c0b2c040 c0a00cf4 [ 76.413842] 1fc0: ffffffff ffffffff 00000000 c0a0067c c0a2da28 00000000 00000000 c0b2c1d4 [ 76.422001] 1fe0: c0b03c5c c0a2da24 c0b07ee0 4220406a 512f04d0 4220807c 00000000 00000000 [ 76.430335] [<bf75bfac>] (ieee80211_sta_register_airtime [mac80211]) from [<00000002>] (0x2) [ 76.438314] Code: e1cd81f0 e1a08002 e1cda1f8 e58de020 (e5102618) [ 76.446965] ---[ end trace 227a38ade964d642 ]--- Fixes: bb31b7cb106c ("ath10k: report tx airtime provided by fw") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.4. Major changes: wil6210 * add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11 * add debugfs file to show PCM ring content * report boottime_ns in scan results ath9k * add a separate loader for AR92XX (and older) pci(e) without eeprom, enabled with the new ATH9K_PCI_NO_EEPROM Kconfig option
2019-09-13rtw88: report RX power for each antennaYan-Hsuan Chuang
Report chains and chain_signal in ieee80211_rx_status. It is useful for program such as tcpdump to see if the antennas are well connected/placed. 8822C is able to receive CCK rates with 2 antennas, while 8822B can only use 1 antenna path to receive CCK rates. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: fix wrong rx power calculationTsang-Shian Lin
Fix the wrong RF path for CCK rx power calculation. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192de: replace _rtl92d_evm_db_to_percentage with generic versionMichael Straube
Function _rtl92d_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92d_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192cu: replace _rtl92c_evm_db_to_percentage with generic versionMichael Straube
Function _rtl92c_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92c_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192ce: replace _rtl92c_evm_db_to_percentage with generic versionMichael Straube
Function _rtl92c_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92c_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: allows to receive AMSDU in AMPDUYan-Hsuan Chuang
The hardware has enough buffer to receive like 8K for an MPDU. So tell mac80211 that we can receive AMSDU in AMPDU. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: add dynamic cck pd mechanismTzu-En Huang
This mechanism reduces the numbers of false alram in cck rate by dynamically adjusting the value of power threshold and cs_ratio. We determine the new value by three factors, which are rssi, false alarm count and igi. Based on these factors, we define the current condition into five levels. Compared to the previous level, if the level is changed, we set the new values for power threshold and cs_ratio. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: move IQK/DPK into phy_calibrationYan-Hsuan Chuang
Since 8822c requires to do not only IQK, but also DPK. Move these calibrations that need to be done once the channel is determined, into phy_calibration. And note that the order of the calibrations matters, 8822c should do IQK first, then DPK. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: add SW DPK supportTzu-En Huang
Power amplifiers are not linear components, and require DPK to reduce its nonlinearity. DPK is called Digital Pre-distortion Calibration, can be used to compensate the output of power. DPK tracking is in charge of tracking the thermal changes. And it then shifts the power curve accordingly, which makes the power output remains linear even if the PA works in different temperature. To perform DPK, the parameter table should also be updated. And the table will be applied when device is powered on. Then DPK will reference the values to calibrate. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: add FW IQK supportYan-Hsuan Chuang
Add support for doing IQK in firmware Ideally the RF component's I/Q vectors should be orthogonal, but usually they are not. So we need to calibrate for the RF components, ex. PA/LNA, ADC/DAC. And if the I/Q vectors are more orthogonal, the mixed signal will have less deviation. This helps with those rates with higher modulation (MCS8-9), because they have more strict EVM/SNR requirement. Also the better of the quality of the signal, the longer it can propagate, and the better throughput performance we can get. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: Enable interrupt migrationTsang-Shian Lin
Enable 8822C Tx/Rx interrupt migration. In some platforms, performance test may cause heavy cpu loading and get bad results. Interrupt migration can decrease the amount of interrupts, and lower cpu loading. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: update pwr_seq to v13Chin-Yen Lee
update sequence to v13 to reduce power consumption when MAC power off Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: update PHY parameter to v38Yan-Hsuan Chuang
Update PHY hardware parameters to v38. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8188ee: rtl8192ce: rtl8192de: rtl8723ae: rtl8821ae: Remove some ↵Larry Finger
unused bit manipulation macros Each of these drivers defines some device to host macros that are never used, thus they can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Convert inline routines to little-endian wordsLarry Finger
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Convert macros that set descriptorLarry Finger
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl complains about a space after a cast are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Replace local bit manipulation macrosLarry Finger
This driver uses a set of local macros to manipulate the RX and TX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Remove unused SET_XXX and GET_XXX macrosLarry Finger
iAs the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Convert inline routines to little-endian wordsLarry Finger
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Convert macros that set descriptorLarry Finger
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl reports lines too long are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-18 22:36:21 +0000