summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2019-10-24adm80211: remove set but not used variables 'mem_addr' and 'io_addr'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/admtek/adm8211.c:1784:16: warning: variable mem_addr set but not used [-Wunused-but-set-variable] drivers/net/wireless/admtek/adm8211.c:1785:15: warning: variable io_addr set but not used [-Wunused-but-set-variable] They are never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtlwifi: Remove unnecessary NULL check in rtl_regd_initNathan Chancellor
When building with Clang + -Wtautological-pointer-compare: drivers/net/wireless/realtek/rtlwifi/regd.c:389:33: warning: comparison of address of 'rtlpriv->regd' equal to a null pointer is always false [-Wtautological-pointer-compare] if (wiphy == NULL || &rtlpriv->regd == NULL) ~~~~~~~~~^~~~ ~~~~ 1 warning generated. The address of an array member is never NULL unless it is the first struct member so remove the unnecessary check. This was addressed in the staging version of the driver in commit f986978b32b3 ("Staging: rtlwifi: remove unnecessary NULL check"). While we are here, fix the following checkpatch warning: CHECK: Comparison to NULL could be written "!wiphy" 35: FILE: drivers/net/wireless/realtek/rtlwifi/regd.c:389: + if (wiphy == NULL) Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Link:https://github.com/ClangBuiltLinux/linux/issues/750 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: add phy_info debugfs to show Tx/Rx physical statusTsang-Shian Lin
This commit adds several Tx/Rx physical information to phy_info debugfs for 8822B/8822C. By this debugfs, we can know physical information, such as Tx/Rx rate, RSSI, EVM,SNR, etc. The information is gotten from the packets of Tx/Rx path. It has no impact for the performance of 8822B/8822C. In the fields, we may meet different kinds of problems, but we may have no professional instrument to check them. At this moment, this debugfs is a good tool, and it may provide useful information for debug. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: add set_bitrate_mask supportTzu-En Huang
Support setting bit rate from upper layer. After configuring the original rate control result in the driver, the result is then masked by the bit rate mask received from the ops set_bitrate_mask. Lastly, the masked result will be sent to firmware. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: Enable 802.11ac beamformee supportTzu-En Huang
Enable MU-MIMO transmit beamformee support for chipset 8822b and 8822c. If the driver is in station mode and associated with an AP, and the capabilities of both meet the requirement of beamforming, driver will run as a beamformee and the corresponding chip settings will be set. In addition, module parameter support_bf is added to enable or disable beamforming. Sometimes driver will need to disable for inter-operate issues, and it would be easier for driver to debug. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: add power tracking supportTzu-En Huang
The temperature of the chip can affect the output power of the RF components. Hence driver requires to compensate the power by adjusting the power index recorded in the power swing table. And if the difference of current thermal value to the default thermal value exceeds a threshold, the RF IQK should be triggered to re-calibrate the characteristics of the RF components, to keep the output IQ vectors of the RF components orthogonal enough. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtw88: use macro to check the current bandYan-Hsuan Chuang
Add macros to see which band we are, based on the current channel. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23rtlwifi: rtl_pci: Fix problem of too small skb->lenLarry Finger
In commit 8020919a9b99 ("mac80211: Properly handle SKB with radiotap only"), buffers whose length is too short cause a WARN_ON(1) to be executed. This change exposed a fault in rtlwifi drivers, which is fixed by regarding packets with skb->len <= FCS_LEN as though they are in error and dropping them. The test is now annotated as likely. Cc: Stable <stable@vger.kernel.org> # v5.0+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: 0x2720 is qu and 0x30DC is notLuca Coelho
When converting the wrong qu configurations in an earlier commit, I accidentally swapped 0x2720 and 0x30DC. Instead of converting 0x2720, I converted 0x30DC. Undo 0x30DC and convert 0x2720. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: add workaround for power gating in integrated 22000Luca Coelho
Add a workaround that forces power gating to be enabled on integrated 22000 devices. This improves power saving in certain situations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: mvm: handle iwl_mvm_tvqm_enable_txq() error returnJohannes Berg
iwl_mvm_tvqm_enable_txq() can return an error, notably if unable to allocate memory for the queue. Handle this error throughout, avoiding storing the invalid value into a u16 which later leads to a disable of an invalid queue ("queue 65524 not used", where 65524 is just -ENOMEM in a u16). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: fix all 9460 entries for qnjLuca Coelho
A bunch of the entries for qnj were wrong. The 9460 device doesn't exist, so update them to 9461 and 9462. There are still a bunch of other occurrences of 9460, but that will be fixed separately. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: fix PCI ID 0x2720 configs that should be socLuca Coelho
Some entries for PCI ID 0x2720 were using iwl9260_2ac_cfg, but the correct is to use iwl9260_2ac_cfg_soc. Fix that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23rtlwifi: Fix potential overflow on P2P codeLaura Abbott
Nicolas Waisman noticed that even though noa_len is checked for a compatible length it's still possible to overrun the buffers of p2pinfo since there's no check on the upper bound of noa_num. Bound noa_num against P2P_MAX_NOA_NUM. Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: fix merge damage on making QnJ exclusiveLuca Coelho
Two patches were sent out of order: one removed some conditions from an if and the other moved the code elsewhere. When sending the patch that moved the code, an older version of the original code was moved, causing the "make QnJ exclusive" code to be essentially undone. Fix that by removing the inclusive conditions from the check again. Fixes: 809805a820c6 ("iwlwifi: pcie: move some cfg mangling from trans_pcie_alloc to probe") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-22ath10k: Fix a NULL-ptr-deref bug in ath10k_usb_alloc_urb_from_pipeHui Peng
The `ar_usb` field of `ath10k_usb_pipe_usb_pipe` objects are initialized to point to the containing `ath10k_usb` object according to endpoint descriptors read from the device side, as shown below in `ath10k_usb_setup_pipe_resources`: for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; // get the address from endpoint descriptor pipe_num = ath10k_usb_get_logical_pipe_num(ar_usb, endpoint->bEndpointAddress, &urbcount); ...... // select the pipe object pipe = &ar_usb->pipes[pipe_num]; // initialize the ar_usb field pipe->ar_usb = ar_usb; } The driver assumes that the addresses reported in endpoint descriptors from device side to be complete. If a device is malicious and does not report complete addresses, it may trigger NULL-ptr-deref `ath10k_usb_alloc_urb_from_pipe` and `ath10k_usb_free_urb_to_pipe`. This patch fixes the bug by preventing potential NULL-ptr-deref. Signed-off-by: Hui Peng <benquike@gmail.com> Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [groeck: Add driver tag to subject, fix build warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-22rtl8xxxu: fix RTL8723BU connection failure issue after warm rebootChris Chiu
The RTL8723BU has problems connecting to AP after each warm reboot. Sometimes it returns no scan result, and in most cases, it fails the authentication for unknown reason. However, it works totally fine after cold reboot. Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE for cold reboot and warm reboot, the registers imply that the MAC is already powered and thus some procedures are skipped during driver initialization. Double checked the vendor driver, it reads the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any during initialization based on them. This commit only tells the RTL8723BU to do full initialization without checking MAC status. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-16rtw88: mark rtw_fw_hdr __packedBrian Norris
The use of u8 and __le16 in this struct assumes that it's going to be packed to byte alignment. C doesn't guarantee that, so we should mark this __packed. Fixes: cc20a7139836 ("rtw88: use struct rtw_fw_hdr to access firmware header") Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-15Merge tag 'wireless-drivers-for-davem-2019-10-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 Second set of fixes for 5.4. ath10k regression and iwlwifi BAD_COMMAND bug are the ones getting most reports at the moment. ath10k * fix throughput regression on QCA98XX iwlwifi * fix initialization of 3168 devices (the infamous BAD_COMMAND bug) * other smaller fixes rt2x00 * don't include input-polldev.h header * fix hw reset to work during first 5 minutes of system run ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15net/wireless: Delete unnecessary checks before the macro call ↵Markus Elfring
“dev_kfree_skb” The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-15wireless: Remove call to memset after dma_alloc_coherentFuqian Huang
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14rtw88: include interrupt.h for tasklet_structBrian Norris
Depending on implicit header includes, we might see this compilation error: .../main.h:1391:24: error: field has incomplete type 'struct tasklet_struct' struct tasklet_struct tx_tasklet; ^ Fixes: 3745d3e550d1 ("rtw88: add driver TX queue support") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14rtw88: use a for loop in rtw_power_mode_change(), not gotoBrian Norris
No change in logic. Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14rtw88: coex: Set 4 slot mode for A2DPPing-Ke Shih
With shallow buffer size, certain BT devices have active A2DP flow control to fill buffer frequently. If the slot is not at BT side, data can't be sent successfully to BT devices, and will cause audio glitch. To resolve this issue, this commit splits TUs into 4-slots instead of 2-slot for all of the A2DP related coexistence strategies. That makes BT have higher opportunity to fill the A2DP buffer in time, and the audio quality could be more stable and smooth. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14rtw88: pci: config phy after chip info is setupYan-Hsuan Chuang
Chip info such as cut_version is required to configure PCI phy. Move rtw_pci_phy_config after rtw_chip_info_setup. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14rtw88: Use rtw_write8_set to set SYS_FUNCYan-Hsuan Chuang
rtw_write8 could modify the values that we do not want to change, use rtw_write8_set instead to only enable the bits of sys_func_en Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14rtw88: add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 supportTzu-En Huang
Add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 feature. According to the "Hardware crypto acceleration" documentation section, when set_key() is called with %DISABLE_KEY command, for outgoing frames, we flush out frames in the queues with the old key; for incoming frames, no frames will be passed to mac80211 decrypted with the old key due to rtw_sec_clear_cam(). Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14rtw88: config 8822c multicast address in MAC init flowTzu-En Huang
Multicast address should be congiured in the initialization flow. The value is created by a hashed calculation that is also implemented by the hardware for multicast address filtering. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14ath10k: fix latency issue for QCA988xMiaoqing Pan
(kvalo: cherry picked from commit 1340cc631bd00431e2f174525c971f119df9efa1 in wireless-drivers-next to wireless-drivers as this a frequently reported regression) Bad latency is found on QCA988x, the issue was introduced by commit 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug"). If uart_pin_workaround is false, this change will set uart pin even if uart_print is false. Tested HW: QCA9880 Tested FW: 10.2.4-1.0-00037 Fixes: 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug") Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14ath10k: Correct error handling of dma_map_single()Bjorn Andersson
The return value of dma_map_single() should be checked for errors using dma_mapping_error() and the skb has been dequeued so it needs to be freed. This was found when enabling CONFIG_DMA_API_DEBUG and it warned about the missing dma_mapping_error() call. Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi") Reported-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14ath: rename regulatory rulesTomislav Požega
Regulatory rule defines in regd.c are used not only by ath9k but also ath10k driver (haven't test other drivers) and thus should be renamed from ATH9K* to ATH*. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14ath10k: fix memory leak for tpc_stats_finalMiaoqing Pan
The memory of ar->debug.tpc_stats_final is reallocated every debugfs reading, it should be freed in ath10k_debug_destroy() for the last allocation. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14ath10k: fix array out-of-bounds accessMiaoqing Pan
If firmware reports rate_max > WMI_TPC_RATE_MAX(WMI_TPC_FINAL_RATE_MAX) or num_tx_chain > WMI_TPC_TX_N_CHAIN, it will cause array out-of-bounds access, so print a warning and reset to avoid memory corruption. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-13Merge tag 'mac80211-next-for-net-next-2019-10-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== A few more small things, nothing really stands out: * minstrel improvements from Felix * a TX aggregation simplification * some additional capabilities for hwsim * minor cleanups & docs updates ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11rtlwifi: rtl8192se: Convert inline routines to little-endian wordsLarry Finger
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-11rtlwifi: rtl8192se: Convert macros that set descriptorLarry Finger
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl complains about a space after a cast and other warnings are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-11rtlwifi: rtl8192se: Replace local bit manipulation macrosLarry Finger
This driver uses a set of local macros to manipulate the RX and TX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-11rtlwifi: rtl8192se: Remove unused GET_XXX and SET_XXXLarry Finger
As the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-11wlcore: clean-up clearing of WL1271_FLAG_IRQ_RUNNINGTony Lindgren
We set WL1271_FLAG_IRQ_RUNNING in the beginning of wlcore_irq(), but clear it before interrupt handling is done in wlcore_irq_locked(). Let's move the clearing to the end of wlcore_irq() where it gets set, and remove the old comments about hardirq. That's no longer the case as we're using request_threaded_irq(). Note that the WL1271_FLAG_IRQ_RUNNING should never race between the interrupt handler and wlcore_runtime_resume() as because of autosuspend timeout we cannot enter idle between wlcore_irq_locked() and the end of wlcore_irq(). Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Eyal Reizer <eyalr@ti.com> Cc: Guy Mishol <guym@ti.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-11rtlwifi: rtl8192ee: Remove set but not used variable 'err'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c: In function rtl92ee_download_fw: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c:111:6: warning: variable err set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-11ath10k: fix null dereference on pointer crash_dataColin Ian King
Currently when pointer crash_data is null the present null check will also check that crash_data->ramdump_buf is null and will cause a null pointer dereference on crash_data. Fix this by using the || operator instead of &&. Fixes: 3f14b73c3843 ("ath10k: Enable MSA region dump support for WCN3990") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-11mac80211_hwsim: add support for OCBRamon Fontes
OCB (Outside the Context of a BSS) interfaces are the implementation of 802.11p, support that. Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com> Link: https://lore.kernel.org/r/20191010181307.11821-2-ramonreisfontes@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-11mac80211_hwsim: add more 5GHz channels, 5/10 MHz supportRamon Fontes
These new 5GHz channels and 5/10 MHz support should be available for OCB usage (802.11p). Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com> Link: https://lore.kernel.org/r/20191010181307.11821-1-ramonreisfontes@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-11ath10k: enable transmit data ack RSSI for QCA9884Abhishek Ambure
For all data packets transmitted, host gets htt tx completion event. Some QCA9984 firmware releases support WMI_SERVICE_TX_DATA_ACK_RSSI, which gives data ack rssi values to host through htt event of data tx completion. Data ack rssi values are valid if A0 bit is set in HTT rx message. So enable the feature also for QCA9884. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00044 Signed-off-by: Abhishek Ambure <aambure@codeaurora.org> Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> [kvalo@codeaurora.org: improve commit log] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09iwlwifi: pcie: change qu with jf devices to use qu configurationLuca Coelho
There were a bunch of devices with qu and jf that were loading the configuration with pu and jf, which is wrong. Fix them all accordingly. Additionally, remove 0x1010 and 0x1210 subsytem IDs from the list, since they are obviously wrong, and 0x0044 and 0x0244, which were duplicate. Cc: stable@vger.kernel.org # 5.1+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-09iwlwifi: exclude GEO SAR support for 3168Luca Coelho
We currently support two NICs in FW version 29, namely 7265D and 3168. Out of these, only 7265D supports GEO SAR, so adjust the function that checks for it accordingly. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: f5a47fae6aa3 ("iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-09iwlwifi: pcie: fix memory leaks in iwl_pcie_ctxt_info_gen3_initNavid Emamdoost
In iwl_pcie_ctxt_info_gen3_init there are cases that the allocated dma memory is leaked in case of error. DMA memories prph_scratch, prph_info, and ctxt_info_gen3 are allocated and initialized to be later assigned to trans_pcie. But in any error case before such assignment the allocated memories should be released. First of such error cases happens when iwl_pcie_init_fw_sec fails. Current implementation correctly releases prph_scratch. But in two sunsequent error cases where dma_alloc_coherent may fail, such releases are missing. This commit adds release for prph_scratch when allocation for prph_info fails, and adds releases for prph_scratch and prph_info when allocation for ctxt_info_gen3 fails. Fixes: 2ee824026288 ("iwlwifi: pcie: support context information for 22560 devices") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-09iwlwifi: dbg_ini: fix memory leak in alloc_sgtableNavid Emamdoost
In alloc_sgtable if alloc_page fails, the alocated table should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-09iwlwifi: pcie: fix rb_allocator workqueue allocationJohannes Berg
We don't handle failures in the rb_allocator workqueue allocation correctly. To fix that, move the code earlier so the cleanup is easier and we don't have to undo all the interrupt allocations in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-09-16 19:57:36 +0000