summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2013-03-18rt2800: 5592: more channel switch registers settings (BBP & GLRT)Stanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: enable rf initStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: setup LDO_CFG0 when configuring channelStanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: init frequency calibrationStanislaw Gruszka
Based on: InitFrequencyCalibrationMode() RT5592_ChipCap from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/frq_cal.c DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: initialize RF_38/39/30 registersStanislaw Gruszka
Based on: RT5592LoadRFNormalModeSetup() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: initialize BBP_R138 registerStanislaw Gruszka
Based on: RT5592LoadRFNormalModeSetup() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: initalize BBP_R103 register on new revisionsStanislaw Gruszka
Based on: NICInitRT5592RFRegisters() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: initalize RF_R27 on older revisionsStanislaw Gruszka
Based on: NICInitRT5592RFRegisters() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: RF early registers initializationStanislaw Gruszka
Based on: NICInitRT5592RFRegisters() RF5592Reg_2G_5G[] from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c This patch also merge common frequency adjustment (RF_R17 settings) code. Further work is needed, to setup more RF/BBP/MAC registers after that. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: common BBP initializationStanislaw Gruszka
Add BBP registers initialization common with other chipsets, but for now performed only for 5592. Based on: NICInitBBP() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: BBP registers initializationStanislaw Gruszka
Based on: NICInitRT5592BbpRegisters() NICInitBBP() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: MAC registers initalizationStanislaw Gruszka
Based on: NICInitRT5592MacRegisters() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c On vendor driver we do not initialize TX_SW_CFG{1,2}. However the same difference is between rt2x00 and vendor driver for 5390 chip. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: channel config stubStanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add channels tableStanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() RT5592_Frequency_Plan_Xtal20M[] RT5592_Frequency_Plan_Xtal40M[] from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: early definesStanislaw Gruszka
Add basic defines for 5592 chip. It can not be enabled until CONFIG_RT2800USB_RT55XX configuration option will be provided in the Kconfig. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: do not crash if spec->channels is NULLStanislaw Gruszka
In case the spec->channels was not specified, print warning instead of hard crash the kernel. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2x00: Fix tx status reporting for reordered frames in rt2800pciHelmut Schaa
rt2800 hardware sometimes reorders tx frames when transmitting to multiple BA enabled STAs concurrently. For example a tx queue [ STA1 | STA2 | STA1 | STA2 ] can result in the tx status reports [ STA1 | STA1 | STA2 | STA2 ] when the hw decides to put the frames for STA1 in one AMPDU. To mitigate this effect associate the currently processed tx status to the first frame in the tx queue with a matching wcid. This patch fixes several problems related to incorrect tx status reporting. Furthermore the tx rate selection is much more stable when communicating with multiple STAs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2x00: Revert "rt2x00: remove unused argument"Helmut Schaa
This reverts commit db36f792370959ff26458f80942cf98fe8249d95 since I'm going to use the data pointer that was removed in a follow up patch. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: cleanup VHT capYogesh Ashok Powar
Firmware returned VHT cap has the same format that cfg80211 expects. There is no need to parse the vht cap from the firmware and then set it to ieee80211_sta_vht_cap. Just copying is sufficient. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18Merge tag 'for-linville-20130318' of git://github.com/kvalo/ath6klJohn W. Linville
2013-03-18rtlwifi: usb: add missing freeing of skbuffJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: cancel cmd timer and free curr_cmd in shutdown processBing Zhao
curr_cmd points to the command that is in processing or waiting for its command response from firmware. If the function shutdown happens to occur at this time we should cancel the cmd timer and put the command back to free queue. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: skip pending commands after function shutdownBing Zhao
During rmmod mwifiex_sdio processing FUNC_SHUTDOWN command is sent to firmware. Firmware expcets only FUNC_INIT once WLAN function is shut down. Any command pending in the command queue should be ignored and freed. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: fix race when queuing commandsAmitkumar Karwar
Running the following script repeatedly on XO-4 with SD8787 produces command timeout and system lockup. insmod mwifiex_sdio.ko sleep 1 ifconfig eth0 up iwlist eth0 scan & sleep 0.5 rmmod mwifiex_sdio mwifiex_send_cmd_async() is called for sync as well as async commands. (mwifiex_send_cmd_sync() internally calls it for sync command.) "adapter->cmd_queued" gets filled inside mwifiex_send_cmd_async() routine for both types of commands. But it is used only for sync commands in mwifiex_wait_queue_complete(). This could lead to a race when two threads try to queue a sync command with another sync/async command simultaneously. Get rid of global variable and pass command node as a parameter to mwifiex_wait_queue_complete() to fix the problem. Cc: <stable@vger.kernel.org> # 3.8 Reported-by: Daniel Drake <dsd@laptop.org> Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18ath9k: limit tx path hang check to normal data queuesFelix Fietkau
The beacon and multicast-buffer queues are managed by the beacon tasklet, and the generic tx path hang check does not help in any way here. Running it on those queues anyway can introduce some race conditions leading to unnecessary chip resets. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18ath9k_hw: revert chainmask to user configuration after calibrationFelix Fietkau
The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early. That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets). Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18iwl3945: fix length of dma buffersStanislaw Gruszka
commit bdb084b22d8aee66c87af5e9c36bd6cf7f3bccfd Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Wed Feb 13 15:49:08 2013 +0100 iwlegacy: more checks for dma mapping errors broke il3945_tx_skb() dma buffer length settings, what results on firmware errors like showed below and make 3945 device non usable. iwl3945 0000:02:00.0: Microcode SW error detected. Restarting 0x82000008. iwl3945 0000:02:00.0: Loaded firmware version: 15.32.2.9 iwl3945 0000:02:00.0: Start IWL Error Log Dump: iwl3945 0000:02:00.0: Status: 0x000202E4, count: 1 iwl3945 0000:02:00.0: Desc Time asrtPC blink2 ilink1 nmiPC Line iwl3945 0000:02:00.0: SYSASSERT (0x5) 0000208934 0x008B6 0x0035E 0x00320 0x00000 267 iwl3945 0000:02:00.0: Error Reply type 0x00000001 cmd Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mac80211: pass queue bitmap to flush operationJohannes Berg
There are a number of situations in which mac80211 only really needs to flush queues for one virtual interface, and in fact during this frames might be transmitted on other virtual interfaces. Calculate and pass a queue bitmap to the driver so it knows which queues to flush. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/nfc/llcp/llcp.c
2013-03-18ath6kl: Fix a debugfs crash for USB devicesMohammed Shafi Shajakhan
Credit distribution stats is currently implemented only for SDIO. This fixes a crash in debugfs for USB interface. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<f91c2048>] read_file_credit_dist_stats+0x38/0x330 [ath6kl_core] *pde = b62bd067 Oops: 0000 [#1] SMP EIP: 0060:[<f91c2048>] EFLAGS: 00210246 CPU: 0 EIP is at read_file_credit_dist_stats+0x38/0x330 [ath6kl_core] EAX: 00000000 EBX: e6f7a9c0 ECX: e7b148b8 EDX: 00000000 ESI: 000000c8 EDI: e7b14000 EBP: e6e09f64 ESP: e6e09f30 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process cat (pid: 4058, ti=e6e08000 task=e50cf230 task.ti=e6e08000) Stack: 00008000 00000000 e6e09f64 c1132d3c 00004e71 e50cf230 00008000 089e4000 e7b148b8 00000000 e6f7a9c0 00008000 089e4000 e6e09f8c c11331fc e6e09f98 00000001 e6e09f7c f91c2010 e6e09fac e6f7a9c0 089e4877 089e4000 e6e09fac Call Trace: [<c1132d3c>] ? rw_verify_area+0x6c/0x120 [<c11331fc>] vfs_read+0x8c/0x160 [<f91c2010>] ? read_file_war_stats+0x130/0x130 [ath6kl_core] [<c113330d>] sys_read+0x3d/0x70 [<c15755b4>] syscall_call+0x7/0xb [<c1570000>] ? fill_powernow_table_pstate+0x127/0x127 Cc: Ryan Hsu <ryanhsu@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath: changed kmalloc to kmemdupAndrei Epure
Signed-off-by: Andrei Epure <epure.andrei@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: Fix the byte alignment rule to avoid loss of bytes in a TCP segmentMyoungje Kim
Either first 3 bytes of the first received tcp segment or last one over MTU size file can be loss due to the byte alignment problem. Although ATH6KL_HTC_ALIGN_BYTES was defined for 'extra bytes for htc header alignment' in the patch "Fix buffer alignment for scatter-gather I/O"(1df94a857), there exists the bytes loss issue which means that it will be truncated 3 bytes in the transmitted file contents if a file which has over MTU size is transferred through TCP/IP stack. It doesn't look like TCP/IP stack bug of 3.5 or the latest version of kernel but the byte alignment issue. This patch is to use the roundup() function for the byte alignment rather than the predefined ATH6KL_HTC_ALIGN_BYTES. kvalo: fixed indentation Signed-off-by: Myoungje Kim <mjei78@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: remove false check from ath6kl_rx()Kalle Valo
Dan found a check from ath6kl_rx() which doesn't make any sense at all: " 1327 if (status || !(skb->data + HTC_HDR_LENGTH)) { ^^^^^^^^^^^^^^^^^^^^^^^^^^ skb->data is a pointer. This pointer math is always going to be false. Should it be testing "packet->act_len < HTC_HDR_LENGTH" or something?" I don't know what the check really was supposed to do, but I think Dan's guess is right. Fix it accordingly. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add an extra band check to ath6kl_wmi_beginscan_cmd()Kalle Valo
Dan reported that smatch found a possible issue in ath6kl_wmi_beginscan_cmd() where we might access sc->supp_rates beyond the end. It shouldn't happen as ar->wiphy->bands always have just the first two bands set, but add an extra check just to be sure. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing support to debug message macrosKalle Valo
Now all log messages are sent through the tracing infrastruture as well. Tracing point doesn't follow debug_mask module parameter, instead it sends all debug messages, so once you enable ath6kl_log_dbg tracing point you will get a lot of messages. Needs to be discussed if this is sensible or not. The overhead should be small enough and we anyway include debug level as well so it's easy to filter in user space. I wasn't really sure what to do with ath6kl_dbg_dump() and for now decided that it also sends the buffer to user space. But most likely in the future ath6kl_dbg_dump() should go away in favor of using proper tracing points, but we will see. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing support to log functionsKalle Valo
All log messages are now sent through tracing interface as well if ATH6KL_TRACING is enabled. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: convert ath6kl_info/err/warn macros to real functionsKalle Valo
After this it's cleaner to add trace calls. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: adding tracing points for htc_mboxKalle Valo
Add tracing points for htc layer, just dumping the packets to user space. I wasn't really sure what to do with the status value, it might not always be accurate, but I included it anyway. I skipped htc_pipe (and usb) implementation for now. Need to add those tracepoints later. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing point for hif irqsKalle Valo
Add a tracing point for hif irq and dump the register content to user space. This is in hif.c as we could use the same code also with SPI but, as ath6kl doesn't SPI and most likely never will be, this is used just by SDIO so name the trace point as ath6kl_sdio_irq to make it easier to manage filters. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing points for sdio transfersKalle Valo
Add tracing points for sdio transfers, just dump the address, flags and the buffer. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: add tracing support and tracing points for wmi packetsKalle Valo
Add basic tracing infrastructure support to ath6kl and which can be enabled with CONFIG_ATH6KL_TRACING. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: cold reset target after host warm bootKalle Valo
Julien reported that ar6004 usb device fails to initialise after host has been rebooted and power is still on for the ar6004 device. He found out that doing a cold reset fixes the issue. I wasn't sure what would be the best way to detect if target needs a reset so I settled on checking a timeout from htc_wait_recv_ctrl_message(). Reported-by: Julien Massot <jmassot@aldebaran-robotics.com> Tested-by: Julien Massot <jmassot@aldebaran-robotics.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: fix usb related error handling and warningsKalle Valo
It was annoying to debug usb warm reboot initialisation problems as many usb related functions just ignored errors and it wasn't obvious from the kernel logs what was failing. Fix all that so that error messages are printed and errors are handled properly. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: cleanup ath6kl_reset_device()Kalle Valo
Move it to init.c, make it static, remove all useless checks and force it to always do cold reset. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-18ath6kl: print firmware capabilitiesKalle Valo
Printin the firmware capabilities during the first firmware boot makes it easier to find out what features firmware supports. Obligatory screenshot: [21025.678481] ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3 [21025.678667] ath6kl: firmware supports: sched-scan,sta-p2pdev-duplex,rsn-cap-override Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-03-17drivers:net: dma_alloc_coherent: use __GFP_ZERO instead of memset(, 0)Joe Perches
Reduce the number of calls required to alloc a zeroed block of memory. Trivially reduces overall object size. Other changes around these removals o Neaten call argument alignment o Remove an unnecessary OOM message after dma_alloc_coherent failure o Remove unnecessary gfp_t stack variable Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers/net: use module_pcmcia_driver() in pcmcia driversH Hartley Sweeten
Use the new module_pcmcia_driver() macro to remove the boilerplate module init/exit code in the pcmcia drivers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13b43: HT-PHY: enable basic TX power setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-13b43: HT-PHY: setup TX power controlRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-20 22:05:02 +0000