summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2013-01-30mwl8k: Choose interface specific calls on vif typeYogesh Ashok Powar
Choose interface specific function calls based on interface type instead of firmware types. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Add/Del self entry for AP interface onlyYogesh Ashok Powar
Add and delete self entry in the firmware sta database for AP interface only. We do not need such an entry for STA interface. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Enable hw encryption for STA mode on AP fwYogesh Ashok Powar
Firmware supports hardware encryption feature for the station interface running on AP firmware. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: set mac type to MWL8K_MAC_TYPE_SECONDARY_CLIENTYogesh Ashok Powar
Set mac type for station interface on AP firmware as secondary. This allows the firmware to set specific characteristics for the STA interface. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Allow adding station interface on AP firmwareYogesh Ashok Powar
When user wants to add a station interface when AP firmware is loaded & in-use, allow creating it and also notify user about the same. Allow adding max one STA interface for AP fw. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Announce simultaneous AP-STA support on AP fwYogesh Ashok Powar
Specify the STA support in iface_limit and in wihpy->interface_modes Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Move tx/rx antenna configuration to mwl8k_probe_hwYogesh Ashok Powar
This avoids calling mwl8k_cmd_rf_antenna functions every time mwl8k_config function is called. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Do not call mwl8k_cmd_set_rf_channel unconditionallyYogesh Ashok Powar
Avoid calling mwl8k_cmd_set_rf_channel unconditionally by checking IEEE80211_CONF_CHANGE_CHANNEL. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwl8k: Stop bsses before hw specific commandsYogesh Ashok Powar
For the commands, that might change the hw characteristics of the PHY device, stop the running bsses and resume them once command is complete. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rt2x00: allow AP and mesh mode to operate simultaneouslyChun-Yeow Yeoh
Allow AP and Mesh mode to operate concurrently using single radio. Verify this using fonera 2.0n featuring RT3052 chipset and also TP-LINK TL-WN727N featuring RT5370 chipset. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemal.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rt2x00: remove NOTICEStanislaw Gruszka
We use this macro only on 3 places - remove it and replace by other appropriate macros for printing messages. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rt2800usb: move "TX status missed" messages to debug levelStanislaw Gruszka
Those messages can flood in dmesg, so do not print them by default. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rt2x00: print warning, notice and info as defaultStanislaw Gruszka
Some messages provide useful information, but are disabled without CONFIG_RT2X00_DEBUG=y, so enable them by default Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ath9k: Update spectral scan output dataSven Eckelmann
The sample data received through the spectral scan can be either in big or little endian byteorder. This information isn't stored in the output file. Therefore it is not possible for the analyzer software to find the correct byte order. It is relative common to get the data from a low end AP in big endian mode and transfer it to another computer in little endian mode to analyze it. Therefore, it would be better to store it in network (big endian) byte order. The extension of the 8 bit bins for each bin to 16 bit is not necessary. This operation can be done in userspace or on a different machine. Instead the max_exp defining the amount of shifting required for each bin is exported to userspace. The change of the output format requires a change of the type in the sample tlv to allow the userspace program to correctly detect the bin format. Reported-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Sven Eckelmann <sven@open-mesh.com> [siwu@hrz.tu-chemnitz.de: squashed patches, update commit message, rebase, fix endianess bug] Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ath9k: reorder error codes for spectralSimon Wunderlich
When using the spectral scan feature, frames with phy errors are returned for further processing to the driver. However, if the frames also have an invalid CRC (which seems to happen quite often), the frame is marked with bad CRC and not with the PHY error bit. The FFT processing function will thus miss the frames. Fix this by changing the precedence in error marking. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ath9k: drop spectral packets after processing themSimon Wunderlich
Spectral packets are "bogus" packets and should not be further evaluated by the RX path. Statistics are added to keep track of these packets. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30ath9k: add debug parameters for spectral scanSimon Wunderlich
Export the various parameters to userspace. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30mwifiex: fix invalid access of PCIe RxBD ring buffer descriptorAvinash Patil
This patch fixes invalid access of RxBD ring buffer descriptor's length and flag inside PCIe send_data_complete() routine. We are supposed to modify TxBD buffer descriptor's length and flag here. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30rt2x00: print chip and firmware version by defaultStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30drivers/net/wireless/iwlegacy/4965-mac.c: adjust duplicate testJulia Lawall
Delete successive tests to the same location. This looks like simple code duplication. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-30Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-01-30Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-01-30mwifiex: fix incomplete scan in case of IE parsing errorBing Zhao
A scan request is split into multiple scan commands queued in scan_pending_q. Each scan command will be sent to firmware and its response is handlded one after another. If any error is detected while parsing IE in command response buffer the remaining data will be ignored and error is returned. We should check if there is any more scan commands pending in the queue before returning error. This ensures that we will call cfg80211_scan_done if this is the last scan command, or send next scan command in scan_pending_q to firmware. Cc: "3.6+" <stable@vger.kernel.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-29Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx Conflicts: drivers/net/wireless/ti/wlcore/main.c
2013-01-29Merge remote-tracking branch 'wireless-next/master' into HEADJohannes Berg
2013-01-28rtlwifi: Fix the usage of the wrong variable in usb.cLarry Finger
In routine _rtl_rx_pre_process(), skb_dequeue() is called to get an skb; however, the wrong variable name is used in subsequent calls. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-28brcmsmac: fix tx status processingArend van Spriel
This issue was reported on the wireless list (see [1]) in which brcmsmac ran into a fatal error: [ 588.284074] brcmsmac bcma0:0: frameid != txh->TxFrameID [ 588.284098] brcmsmac bcma0:0: MI_TFS: fatal [ 588.284103] brcmsmac bcma0:0: wl0: fatal error, reinitializing [ 588.286208] ieee80211 phy0: Hardware restart was requested The tx status feedback is processed in a loop limiting the number of frames processed in one run. The code terminate processing when the limit is reached regardless the txstatus value read from the device register. When that status is is flagged as being valid it must be processed as the hardware will clear it after is has been read. Bisecting was done by Seth Forshee and showed following commit as the culprit: commit 57fe504817ccec9b6ac23e973d2925343bf1e3b6 Author: Piotr Haber <phaber@broadcom.com> Date: Wed Nov 28 21:44:07 2012 +0100 brcmsmac: fix bounds checking in tx/rx [1] http://www.spinics.net/lists/linux-wireless/msg101293.html Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-28Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/iwlwifi/dvm/tx.c
2013-01-24iwlwifi: include debugfs.hJohannes Berg
The iwl-op-mode.h file uses a struct dentry for debugfs so should include debugfs.h. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24mac80211: provide the vif in rssi_callbackEmmanuel Grumbach
Since drivers can support several BSS / P2P Client interfaces, the rssi callback needs to inform the driver about the interface teh rssi event relates to. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24iwlwifi: provide RX page orderEmmanuel Grumbach
When the pages are to be used by front-end, it may need to know the page order, provide it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24iwlwifi: update copyrightJohannes Berg
Update Copyright notices to 2013. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-24Revert "iwlwifi: fix the reclaimed packet tracking upon flush queue"Emmanuel Grumbach
This reverts commit f590dcec944552f9a4a61155810f3abd17d6465d which has been reported to cause issues. See https://lkml.org/lkml/2013/1/20/4 for further details. Cc: stable@vger.kernel.org [3.7] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-23Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-01-22ath9k_hw: remove a useless WARN_ONFelix Fietkau
&ah->curchan->ani can never be NULL Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k_hw: reduce struct ar5416AniState sizeFelix Fietkau
It is kept per-channel, so removing unnecessary (or constant) fields from it can save quite a bit of memory. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k_hw: remove ath9k_hw_ani_setup and its variablesFelix Fietkau
They are no longer needed for ANI functionality Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k_hw: make the initval parameter to ath9k_hw_write_array constFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k: use ath_tx_process_buffer instead of open-coding similar codeFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k: clean up processing of pending tx frames on resetFelix Fietkau
Dropping packets from aggregation sessions is usually not a good idea, as it might upset the synchronization of the BlockAck receive window of the remote node. The use of the retry_tx parameter to reset/tx-drain functions also seemed a bit arbitrary. This patch removes this parameter altogether and ensures that pending tx frames are not dropped for no good reason. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k: stop rx after txFelix Fietkau
Completing frame transmission can fail if the rx engine is stopped prematurely, as the hw might be waiting for an ACK from the other side. Shutting down tx before rx might make the DMA shutdown more reliable. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22net: wireless/rtlwifi: fix uninitialized variable issueCong Ding
The use of variable packet_beacon might be uninitialized in the three files. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22iwlegacy: don't return zero on failure paths in il4965_pci_probe()Alexey Khoroshilov
If hardware is not ready, il4965_pci_probe() breaks off initialization, deallocates all resources, but returns zero. The patch adds -EIO as return value in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22mwl8k: don't return zero on failure paths in mwl8k_probe[_hw]()Alexey Khoroshilov
If pci_iomap() fails in mwl8k_probe(), it breaks off initialization, deallocates all resources, but returns zero. There is a similar issue when priv->rxd_ops is NULL in mwl8k_probe_hw(). The patch adds proper error code return values. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22mwifiex: correction in status codes used for association failureAmitkumar Karwar
When AP responds with appropriate status code, we forward that code correctly to cfg80211. But sometimes when there is no response from AP, our firmware uses proprietary status codes. We will map authentication timeout to WLAN_STATUS_AUTH_TIMEOUT and other proprietary codes to WLAN_STATUS_UNSPECIFIED_FAILURE. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22rt2x00: Improve TX status handling for BlockAckReq framesHelmut Schaa
Since rt2800 hardware isn't capable of reporting the TX status of BlockAckReq frames implement the TX status handling of BARs in rt2x00lib. We keep track of all BARs that are send out and try to match incoming BAs to the appropriate BARs. This allows us to report a more or less accurate TX status for BAR frames which in turn improves BA session stability. This is loosley based on Christian Lamparter's patch for carl9170 "carl9170: fix HT peer BA session corruption". We have to walk the list of pending BARs for every rx'red BA even though most BAs don't belong to any of these BARs as they are just acknowledging an AMPDU. To keep that overhead low use RCU which allows us to walk the list of pending BARs without the need to acquire a lock. This however requires us to _copy_ relevant information from the BAR (RA, TA, control field, start sequence number) into our BAR list entry. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Tested-by: Andreas Hartmann <andihartmann@01019freenet.de> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22prism54: bug in getting auth typeDan Carpenter
There is a missing break statement so SHARED_KEY authentication doesn't work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22b43: N-PHY: fix gain in b43_nphy_get_gain_ctl_workaround_ent()Dan Carpenter
There were no break statements in this switch statement so everything used the default settings. Per Walter Harms's suggestion, I've replaced the switch statement and done a little cleanup. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-23 14:31:31 +0000