summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2025-07-23wifi: iwlwifi: Remove support for rx OMI bandwidth reductionMiri Korenblit
This feature turns out to have an issue: it can take up to 8 seconds to detect high throughput scenarios and to leave RX OMI bandwidth reduction. This leads to throughput degradation. Until the issues are fixed, remove the RX OMI implementation. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250723094230.a9ccfe210516.Ic87bc7709a6761f593e88f1488a41442c68c1686@changeid
2025-07-23wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1Miri Korenblit
This version doesn't provide the sta id, so we need to look it up - assuming that no other sta exists, since one of the conditions of entering OMI is not having P2P/TDLS. But when we leave OMI, because of the P2P/TDLS activation, the P2P/TDLS sta can already exist while we receive the notification from the FW. This causes an error log which is incorrect. Since OMI is only supported in SC, which is not shipped yet, no one will use a FW with the old version. Remove support for it. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250723094230.b716b9cebaa7.I2a1cc4be441dbbb5566a9a3d2d330d956ff3ed38@changeid
2025-07-23wifi: iwlwifi: remove SC2F firmware supportMiri Korenblit
The only difference between SC2 and SC2F is that they use a different FSEQ image. The firmware of SC2 implements the logic of selecting the right FSEQ image to load, so there is no need for SC2F firmware image. Stop loading it, and load SC2 image instead. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250723094230.bf0ec63e49a9.Iffa0a982f90a179566d85c60ccd3dbfc50e293ef@changeid
2025-07-23wifi: iwlwifi: mvm: Remove NAN supportIlan Peer
NAN is not officially supported on any of the MVM devices so there is no need to maintain it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250723094230.b327adbf35c0.I0357e383ab5df72d8b87e0dee10609a6946865b6@changeid
2025-07-23wifi: iwlwifi: mld: avoid outdated reorder buffer head_snAvraham Stern
If no frames are received on a queue for a while, the reorder buffer head_sn may be an old one. When the next frame that is received on that queue and buffered is a subframe of an AMSDU but not the last subframe, it will not update the buffer's head_sn. When the frame release notification arrives, it will not release the buffered frame because it will look like the notification's NSSN is lower than the buffer's head_sn (because of a wraparound). Fix it by updating the head_sn when the first frame is buffered. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250723094230.e1f62a9a603c.I7b57a481122074b1f40d39cd31db2e5262668eb2@changeid
2025-07-23wifi: iwlwifi: mvm: avoid outdated reorder buffer head_snAvraham Stern
If no frames are received on a queue for a while, the reorder buffer head_sn may be an old one. When the next frame that is received on that queue and buffered is a subframe of an AMSDU but not the last subframe, it will not update the buffer's head_sn. When the frame release notification arrives, it will not release the buffered frame because it will look like the notification's NSSN is lower than the buffer's head_sn (because of a wraparound). Fix it by updating the head_sn when the first frame is buffered. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Reviewed-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250723094230.795ec0cb8817.I9ec9a3508e7935e8d1833ea3e086066fdefee644@changeid
2025-07-23wifi: iwlwifi: disable certain features for fips_enabledJohannes Berg
When fips_enabled is set, keys will not be given to the hardware by mac80211 since the hardware isn't certified. In this case, various features cannot work correctly as the firmware needs to handle frames, but it then cannot since no keys are available. Disable features: - WoWLAN since no keys etc. - MFP since some frames need to be handled in firmware - EHT/6GHz since MFP is required Also restrict A-MSDU size since A-MSDUs cannot be split up by hardware and thus need to fit into the RX buffers in one piece. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250723094230.329fade58a27.I0be27dd329643cc5fdf79a8c8b8f6d2e6fb5c175@changeid
2025-07-23wifi: iwlwifi: mld: support channel survey collection for ACS scansBenjamin Berg
The firmware is able to collect channel statistics when doing passive scans. Enable the flag when doing a passive scan on an AP interface and collect the survey information. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250723094230.a659ef1b1fd8.I24a9a0383327c231f36be170968bc7bac801f9f2@changeid
2025-07-23wifi: iwlwifi: mld: disable RX aggregation if requestedMiri Korenblit
The user can request to disable RX aggregations via the module parameter enable_11n. Honor this request and reject addba. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250723094230.40746586ade7.Ibf5877df76ea2f1eee614166b3194843fd9898cd@changeid
2025-07-23wifi: rt2x00: soc: modernize probeRosen Penev
Remove a bunch of static memory management functions and simplify with devm. Also move allocation before ieee80211_alloc_hw to get rid of goto statements and clarify the error handling a bit more. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://patch.msgid.link/20250722212856.11343-6-rosenp@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: rt2800: move 2x00soc to 2800socRosen Penev
This driver was written with multiple SOC platforms in mind. However since Ralink was aquired by Mediatek, it only effectively got used by older platforms. As such, we can slim down the driver slightly by moving all of rt2x00soc to rt2800soc in order to benefit from inlining. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://patch.msgid.link/20250722212856.11343-5-rosenp@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: rt2800soc: allow loading from OFRosen Penev
Add a single binding to help the already present dts files load the driver. More are possible but there doesn't seem to be a significant difference between them to justify this. Use wifi name per dtschema requirements. Added OF dependency to SOC CONFIG as adding of_match_table without OF being present makes no sense. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Link: https://patch.msgid.link/20250722212856.11343-4-rosenp@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: rt2x00: remove mod_name from platform_driverRosen Penev
mod_name is a legacy debugging feature with no real modern use. An analysis of the underlying MIPS setup code reveals it to also be unused. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Link: https://patch.msgid.link/20250722212856.11343-3-rosenp@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: rt2x00: add COMPILE_TESTRosen Penev
While this driver is for a specific arch, there is nothing preventing it from being compiled on other platforms. Allows the various bots to test compilation and complain if a patch is bad. Signed-off-by: Rosen Penev <rosenp@gmail.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://patch.msgid.link/20250722212856.11343-2-rosenp@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcmfmac: cyw: Fix __counted_by to be LE variantKees Cook
In brcmf_cyw_mgmt_tx() the "len" counter of the struct brcmf_mf_params_le::data flexible array is stored as little-endian via cpu_to_le16() so the __counted_by_le() variant must be used: struct brcmf_mf_params_le *mf_params; ... mf_params_len = offsetof(struct brcmf_mf_params_le, data) + (len - DOT11_MGMT_HDR_LEN); mf_params = kzalloc(mf_params_len, GFP_KERNEL); ... mf_params->len = cpu_to_le16(len - DOT11_MGMT_HDR_LEN); Fixes: 66f909308a7c ("wifi: brcmfmac: cyw: support external SAE authentication in station mode") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250721181810.work.575-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-22wifi: mac80211: don't require cipher and keylen in gtk rekeyMiri Korenblit
ieee80211_add_gtk_rekey receives a keyconf as an argument, and the cipher and keylen are taken from there to the new allocated key. But in rekey, both the cipher and the keylen should be the same as of the old key, so let ieee80211_add_gtk_rekey find those, so drivers won't have to fill it in. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250721214922.3c5c023bfae9.Ie6594ae2b4b6d5b3d536e642b349046ebfce7a5d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-22Merge tag 'ath-next-20250721' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless-next Jeff Johnson says: ================== ath.git patches for v6.17 Highlights for some specific drivers include: ath9k: Add AHB "of" support ath11k: Support device-specific firmware override Fix potentially reordered access to device memory ath12k: Add more Wi-Fi 7 functionality Add more statistics to DebugFS Support different memory profiles Support 802.11 encap/decap offload to firmware Fix potentially reordered access to device memory And of course there is the usual set of cleanups and bug fixes across the entire family of "ath" drivers. ================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-22wifi: iwlwifi: mvm/fw: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. We have a flexible struct iwl_tx_cmd_v6 in the middle of a few structs, but those don't even need the flexible part. So, we add iwl_tx_cmd_v6_params, that will contain everything except the flexible array and use this one for the containing structs. Also, as part of the refactoring remove unused flex array `payload`. So, with these changes, fix the following warnings: drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/iwlwifi/mld/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:134:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tdls.h:53:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:745:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/net/wireless/intel/iwlwifi/mvm/../fw/api/tx.h:764:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://msgid.link/aCUOQ6wdD1jQjO36@kspp [use iwl_tx_cmd_v6_params as described in the changed commit message] Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250709224608.0785a61b0826.I6da02c2a12a5ed1e6d317045a6995d132850a455@changeid Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-07-22wifi: iwlwifi: Fix typo "ransport"WangYuli
There is a spelling mistake of 'ransport' in comments which should be 'transport'. Link: https://lore.kernel.org/all/03DFEDFFB5729C96+20250714104736.559226-1-wangyuli@uniontech.com/ Signed-off-by: WangYuli <wangyuli@uniontech.com> Link: https://patch.msgid.link/8F065DF7EF7EEB89+20250715055828.932160-1-wangyuli@uniontech.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-07-22wifi: iwlwifi: fix cmd length when sending WOWLAN_TSC_RSC_PARAMAntonio Quartulli
In iwl_mvm_wowlan_config_rsc_tsc() when calling iwl_mvm_send_cmd_pdu() we are accidentally passing the size of a pointer rather than the size of the object pointed by it. Fix the expression in order to pass the approriate object length. Fixes: 493681d9f95b ("wifi: iwlwifi: remove support of version 4 of iwl_wowlan_rsc_tsc_params_cmd") Address-Coverity-ID: 1647627 ("Incorrect expression (SIZEOF_MISMATCH)") Signed-off-by: Antonio Quartulli <antonio@mandelbit.com> Link: https://patch.msgid.link/20250716201911.700-1-antonio@mandelbit.com Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
2025-07-21wifi: ath12k: Correct tid cleanup when tid setup failsSarika Sharma
Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(), the tid value is already incremented, even though the corresponding TID is not actually allocated. Proceed to ath12k_dp_rx_peer_tid_delete() starting from unallocated tid, which might leads to freeing unallocated TID and cause potential crash or out-of-bounds access. Hence, fix by correctly decrementing tid before cleanup to match only the successfully allocated TIDs. Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(), as decrementing the tid before cleanup in loop will take care of this. Compile tested only. Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250721061749.886732-1-quic_sarishar@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-21wifi: ath12k: bring DFS support back for WCN7850Baochen Qiang
Due to the restrict in MAC80211 that DFS (Dynamic Frequency Selection) can't be enabled on multiple channels, commit 176f3009ae59 ("wifi: ath12k: support 2 channels for single pdev device") removes DFS support in order to support 2 channels concurrently, making AP mode not working on DFS channels [1]. Revert portions of that commit to bring DFS back, and add a new combination to support 2-channels concurrency. This is valid because the MAC80211 restrict works on each individual combination, but does not care about them as a whole, as far as DFS is concerned. This change applies to WCN7850 only, other chips are not affected. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 176f3009ae59 ("wifi: ath12k: support 2 channels for single pdev device") Reported-by: Mihai Moldovan <ionic@ionic.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220346 # 1 Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Tested-by: Mihai Moldovan <ionic@ionic.de> Link: https://patch.msgid.link/20250721-ath12k-dfs-v1-1-065c31454f91@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-21wifi: ath12k: Prefer {} to {0} in initializersJeff Johnson
Prefer {} to {0} in initializers since {} works even when the first member is not a scalar. Generated using: sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath12k/* Compile tested only. Link: https://patch.msgid.link/20250720-ath12k-zero-brace-v1-1-d8c8ca9d40a8@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-21wifi: ath11k: Prefer {} to {0} in initializersJeff Johnson
Prefer {} to {0} in initializers since {} works even when the first member is not a scalar. Generated using: sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath11k/* Compile tested only. Link: https://patch.msgid.link/20250720-ath11k-zero-brace-v1-1-6132e2ef1748@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-21wifi: ath10k: Prefer {} to {0} in initializersJeff Johnson
Prefer {} to {0} in initializers since {} works even when the first member is not a scalar. Generated using: sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath10k/* Compile tested only. Link: https://patch.msgid.link/20250720-ath10k-zero-brace-v1-1-c1ee818d6238@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-21wifi: brcmfmac: support CYW54591 PCIE deviceDouble Lo
CYW54591 is a variant of BCM4355 silicon with the same chipid. In the chipid-fwname mapping table, apply chiprev 13 to identify CYW54591. Skip reading OTP process for CYW chip since it contains vendor specific information which is not common for cypress. Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Ian Lin <ian.lin@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250624093453.7264-1-ian.lin@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-21wifi: brcmfmac: fix P2P discovery failure in P2P peer due to missing P2P IEGokul Sivakumar
After commit bd99a3013bdc ("brcmfmac: move configuration of probe request IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie() got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan(). Because of this, as part of the scan request handler for the P2P Discovery, vif struct used for adding the Probe Request P2P IE in firmware got changed from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly. So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe requests frames and the other P2P peers were unable to discover this device causing a regression on the P2P feature. To fix this, while setting the P2P IE in firmware, properly use the vif of the P2P discovery wdev on which the driver received the P2P scan request. This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie() is completed. Fixes: bd99a3013bdc ("brcmfmac: move configuration of probe request IEs") Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-19wifi: ath12k: Advertise encapsulation/decapsulation offload support to mac80211Nithyanantham Paramasivam
Currently, the mac80211 layer handles construction and parsing of 802.11 headers during packet transmission and reception. Offloading encapsulation and decapsulation to hardware can significantly enhance performance. Check the service bit to determine if the firmware supports Ethernet offload. If supported, advertise the capability to mac80211 to bypass software-based 802.11 header processing. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250718025513.32982-4-nithyanantham.paramasivam@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-19wifi: ath12k: Fix TX status reporting to mac80211 when offload is enabledNithyanantham Paramasivam
Currently, the ath12k driver supports only the native Wi-Fi frame format. In this mode, the ieee80211_tx_status() function works correctly to report transmission status to mac80211, as it retrieves station information using sta_info_get_by_addrs(). However, this method is not applicable for Ethernet-converted packets, since sta_info_get_by_addrs() cannot extract station information from such formats. Retrieve station information using ath12k_peer_find_by_id() to support all frame formats, including native Wi-Fi, raw, and Ethernet. Report transmission status using ieee80211_tx_status_ext(), and include rate information as part of the datapath TX status report. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250718025513.32982-3-nithyanantham.paramasivam@oss.qualcomm.com [changed instances of { 0 } to {}] Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-19wifi: ath12k: Fix the handling of TX packets in Ethernet modeNithyanantham Paramasivam
Currently, in the transmit (TX) direction, EAPOL, QoS NULL, and multicast frames are sent in native Wi-Fi (802.11) format. However, when the virtual interface is configured in Ethernet mode, transmission fails for packets enqueued in native Wi-fi format. To address this issue, the firmware should be instructed to treat these packets as RAW type packets, ensuring proper handling even when the interface operates in Ethernet mode. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250718025513.32982-2-nithyanantham.paramasivam@oss.qualcomm.com [fix indentation] Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-18net: s/dev_set_threaded/netif_set_threaded/Stanislav Fomichev
Commit cc34acd577f1 ("docs: net: document new locking reality") introduced netif_ vs dev_ function semantics: the former expects locked netdev, the latter takes care of the locking. We don't strictly follow this semantics on either side, but there are more dev_xxx handlers now that don't fit. Rename them to netif_xxx where appropriate. Note that one dev_set_threaded call still remains in mt76 for debugfs file. Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250717172333.1288349-7-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-18wifi: ath12k: Add support to parse max ext2 wmi service bitTamizh Chelvam Raja
Update the host logic to dynamically parse WMI extended service bits beyond the current fixed size of 4 * 32 (i.e., 384 bits) after WMI_MAX_EXT_SERVICE (256). The current implementation misses service bits advertised beyond this range, leading to not enabling some of the features supported by firmware. Implement dynamic length parsing to iterate up to the maximum service bit index advertised by the firmware. This ensures all supported features are correctly recognized and enabled. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250717173539.2523396-3-tamizh.raja@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-18wifi: ath12k: fix endianness handling while accessing wmi service bitTamizh Chelvam Raja
Currently there is no endian conversion in ath12k_wmi_tlv_services_parser() so the service bit parsing will be incorrect on a big endian platform and to fix this by using appropriate endian conversion. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00217-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 342527f35338 ("wifi: ath12k: Add support to parse new WMI event for 6 GHz regulatory") Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250717173539.2523396-2-tamizh.raja@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-07-18wifi: plfxlc: Fix error handling in usb driver probeMurad Masimov
If probe fails before ieee80211_register_hw() is successfully done, ieee80211_unregister_hw() will be called anyway. This may lead to various bugs as the implementation of ieee80211_unregister_hw() assumes that ieee80211_register_hw() has been called. Divide error handling section into relevant subsections, so that ieee80211_unregister_hw() is called only when it is appropriate. Correct the order of the calls: ieee80211_unregister_hw() should go before plfxlc_mac_release(). Also move ieee80211_free_hw() to plfxlc_mac_release() as it supposed to be the opposite to plfxlc_mac_alloc_hw() that calls ieee80211_alloc_hw(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices") Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Link: https://patch.msgid.link/20250321185226.71-3-m.masimov@mt-integration.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: brcmfmac: Add support for the SDIO 43751 deviceFabio Estevam
Add the SDIO ID and firmware matching for the 43751 device. Based on the previous work from Marc Gonzalez <mgonzalez@freebox.fr>. Tested on an i.MX6DL board connected to an AP6398SV chip with the brcmfmac43752-sdio.bin firmware taken from: https://source.puri.sm/Librem5/firmware-brcm43752-nonfree Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250712215307.1310802-1-festevam@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: wilc1000: Use min() to improve codeQianfeng Rong
Use min() to reduce the code and improve its readability. Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Link: https://patch.msgid.link/20250715121721.266713-7-rongqianfeng@vivo.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: mwifiex: Use max_t() to improve codeQianfeng Rong
Use max_t() to reduce the code and improve its readability. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con> Link: https://patch.msgid.link/20250715121721.266713-6-rongqianfeng@vivo.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: brcm80211: Use min() to improve codeQianfeng Rong
Use min() to reduce the code and improve its readability. Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250715121721.266713-5-rongqianfeng@vivo.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: brcmfmac: Fix typo "notifer"WangYuli
There is a spelling mistake of 'notifer' in the comment which should be 'notifier'. Signed-off-by: WangYuli <wangyuli@uniontech.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/F92035B0A9123150+20250715134407.540483-5-wangyuli@uniontech.com [remove prior link] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: brcmsmac: Remove const from tbl_ptr parameter in ↵Nathan Chancellor
wlc_lcnphy_common_read_table() A new warning in clang [1] complains that diq_start in wlc_lcnphy_tx_iqlo_cal() is passed uninitialized as a const pointer to wlc_lcnphy_common_read_table(): drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2728:13: error: variable 'diq_start' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer] 2728 | &diq_start, 1, 16, 69); | ^~~~~~~~~ The table pointer passed to wlc_lcnphy_common_read_table() should not be considered constant, as wlc_phy_read_table() is ultimately going to update it. Remove the const qualifier from the tbl_ptr to clear up the warning. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/2108 Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250715-brcmsmac-fix-uninit-const-pointer-v1-1-16e6a51a8ef4@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18Merge tag 'rtw-next-2025-07-18' of https://github.com/pkshih/rtwJohannes Berg
Ping-Ke Shih says: ================== rtw-next patches for v6.17 Some minor fixes and refinements. Major changes are listed: rtw89: - STA+P2P concurrency feature gets implemented. - add USB architecture and support RTL8851BU and RTL8852BU. ================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-18wifi: rtlwifi: Use min()/max() to improve codeQianfeng Rong
Use min()/max() to reduce the code and improve its readability. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250715121721.266713-8-rongqianfeng@vivo.com
2025-07-18wifi: rtw89: wow: Add Basic Rate IE to probe request in scheduled scan modeChin-Yen Lee
In scheduled scan mode, the current probe request only includes the SSID IE, but omits the Basic Rate IE. Some APs do not respond to such incomplete probe requests, causing net-detect failures. To improve interoperability and ensure APs respond correctly, add the Basic Rate IE to the probe request in driver. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250716122926.6709-1-pkshih@realtek.com
2025-07-18wifi: rtw89: Lower the timeout in rtw89_fwdl_check_path_ready_ax() for USBBitterblue Smith
When the chip is not powered on correctly (like during driver development) rtw89_fwdl_check_path_ready_ax() can fail. read_poll_timeout_atomic() with a delay of 1 µs and a timeout of 400000 µs can take 50 seconds with USB because of the time it takes to send a USB control message. The firmware upload is tried 5 times, so in total it takes 250 seconds. Lower the timeout to 3200 for USB in order to reduce the time rtw89_fwdl_check_path_ready_ax() takes from 50 seconds to less than 1 second. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/af0b25d0-ea67-455e-91f2-8e4c18ae4328@gmail.com
2025-07-18wifi: rtw89: Lower the timeout in rtw89_fw_read_c2h_reg() for USBBitterblue Smith
This read_poll_timeout_atomic() with a delay of 1 µs and a timeout of 1000000 µs can take ~250 seconds in the worst case because sending a USB control message takes ~250 µs. Lower the timeout to 4000 for USB in order to reduce the maximum polling time to ~1 second. This problem was observed with RTL8851BU while suspending to RAM with WOWLAN enabled. The computer sat for 4 minutes with a black screen before suspending. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/09313da6-c865-4e91-b758-4cb38a878796@gmail.com
2025-07-18wifi: rtw89: check path range before using in rtw89_fw_h2c_rf_ps_info()Ping-Ke Shih
The variable 'path' from rtw89_phy_get_syn_sel() as index of array could be 3, but array size is 2. Fortunately, current chip->rf_path_num is smaller or equal to 2, so it is safe. To prevent mistakes in the future, add a checking and avoid Coverity warnings. Addresses-Coverity-ID: linux-next: 1644716 ("Out-of-bounds write") Addresses-Coverity-ID: linux-next: 1644717 ("Out-of-bounds write") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250715035259.45061-6-pkshih@realtek.com
2025-07-18wifi: rtw89: purge obsoleted scan events with software sequence numberPing-Ke Shih
The queued and obsoleted scan events can be wrongly treated as events of new scan request, causing unexpected scan result. Attach a software sequence number to scan request and its corresponding events. When a new scan request is acknowledged by firmware, purge the scan events if its sequence number is not belong to current request. Normal case: mac80211 event work event BH ------------- ---------- -------- scan req #1 ---->o | <----o <...........................o o | <--------------------------+ ieee80211_scan_completed() Abnormal case (late event work): mac80211 event work event BH ------------- ---------- -------- scan req #1 ---->o | <----o <...........................o o #1 scan cancel #2 ->o | <----o <...........................o o #2 | (patch to avoid this) scan req #3 ---->o | | | <----o <..........|................o | o #3 <--------------------------+ ieee80211_scan_completed() Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250715035259.45061-5-pkshih@realtek.com
2025-07-18wifi: rtw89: dynamically update EHT preamble puncturingKuan-Chung Chen
When the 'Disabled Subchannel Bitmap' within the EHT Operation element is changed, mac80211 parse and pass it to the driver. The driver is then updated with this puncturing bitmap to optimize bandwidth usage and prevent interference from degrading performance across the entire channel. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250715035259.45061-4-pkshih@realtek.com
2025-07-18wifi: rtw89: mac: reduce PPDU status length for WiFi 6 chipsChia-Yuan Li
Since the RX counter in the PPDU status is not used, it is disabled to reduce the waste of DLE quota. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250715035259.45061-3-pkshih@realtek.com
2025-07-18wifi: rtw89: trigger TX stuck if FIFO fullChia-Yuan Li
In order for the situation where the dispatcher blocking causes HAXIDMA to be unable to TX to be reported as a TX stuck, so that subsequent recovery can be handled. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250715035259.45061-2-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-09-10 12:26:49 +0000