summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-11-30ath5k: Use new function to stop beacon queueNick Kossifidis
* Since we only use ath5k_hw_stop_tx_dma to stop the beacon queue, introduce a new function ath5k_hw_stop_beacon_queue so that we can use that instead and have better control. In the future we can add more beacon queue specific stuff there (maybe tweak beacon timers or something), for now just call ath5k_hw_stop_tx_dma. * Also since we don't call ath5k_hw_stop_rx/tx_dma from outside dma.c, make them static. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Check RXE when setting RXDPNick Kossifidis
* Make sure we are not trying to set RXDP while RX is active, for now ignore the return value. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Use DCU early termination correctlyNick Kossifidis
* DCU early termination should be used to quickly flush QCU according to docs so don't enable it for all queues, enable it only when stopping each queue and disable it when we are done. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Debug DMA timeoutsNick Kossifidis
* Increase timeouts on ath5k_hw_stop_tx_dma and also wait for tx queue to stop before checking for pending frames * Add a new debug level to debug dma start/stop Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Use new dma_stop function on base.cNick Kossifidis
* Since we stop rx/tx dma and pcu durring reset there is no need to call ath5k_hw_stop_rx/tx_dma before, also there is no need to call them durring stop_locked since we can use ath5k_hw_dma_stop for both. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Stop PCU on resetNick Kossifidis
* Stop PCU receive logic (DRU) durring reset We need to be sure pcu is not active when trying to stop rx dma right now this is done on ath5k_reset (base.c) but later we are going to clean it up. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Add new function to stop rx/tx DMANick Kossifidis
* Add a new function to stop rx/tx dma and use in when reset starts Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath5k: Reset cleanup and generic cleanupNick Kossifidis
* No functional changes * Clean up reset: Introduce init functions for each unit and call them instead of having everything inside ath5k_hw_reset (it's just c/p for now so nothing changes except calling order -I tested it with various cards and it's ok-) * Further cleanups: ofdm_timings belongs to phy.c rate_duration belongs to pcu.c clock functions are general and belong to reset.c (more to follow) * Reorder functions for better organization: We start with helpers and other functions follow in categories, init functions are last Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath9k: Add support for Adaptive Power ManagementMohammed Shafi Shajakhan
This feature is to mitigate the problem of certain 3 stream chips that exceed the PCIe power requirements.An EEPROM flag controls which chips have APM enabled which is basically read from miscellaneous configuration element of the EEPROM header. This workaround will reduce power consumption by using 2 Tx chains for Single and Double stream rates (5 GHz only).All self generated frames (regardless of rate) are sent on 2 chains when this feature is enabled(Chip Limitation). Cc: Paul Shaw <paul.shaw@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Tested-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30ath9k: Fix STA disconnect issue due to received MIC failed bcast framesSenthil Balasubramanian
AR_RxKeyIdxValid will not be set for bcast/mcast frames and so relying this status for MIC failed frames is buggy. Due to this, MIC failure events for broadcast frames are not sent to supplicant resulted in AP disconnecting the STA. Able to pass Wifi Test case 5.2.18 with this fix. Cc: Stable <stable@kernel.org> (2.6.36+) Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-30orinoco: abort scan on interface downDavid Kilroy
This fixes the problem causing the following trace: ------------[ cut here ]------------ WARNING: at linux-2.6.34/net/wireless/core.c:633 wdev_cleanup_work+0xb7/0xe0 [cfg80211]() Hardware name: Latitude C840 Pid: 707, comm: cfg80211 Not tainted 2.6.34.7-0.5-desktop #1 Call Trace: [<c02065c3>] try_stack_unwind+0x173/0x190 [<c02051cf>] dump_trace+0x3f/0xe0 [<c020662b>] show_trace_log_lvl+0x4b/0x60 [<c0206658>] show_trace+0x18/0x20 [<c064e0b3>] dump_stack+0x6d/0x72 [<c02443ae>] warn_slowpath_common+0x6e/0xb0 [<c0244403>] warn_slowpath_null+0x13/0x20 [<e2db5497>] wdev_cleanup_work+0xb7/0xe0 [cfg80211] [<c025cfa9>] run_workqueue+0x79/0x170 [<c025d123>] worker_thread+0x83/0xe0 [<c025fef4>] kthread+0x74/0x80 [<c0203826>] kernel_thread_helper+0x6/0x10 ---[ end trace 3f0348b3b0c6f4ff ]--- Reported by: Giacomo Comes <comes@naic.edu> Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29NET: wan/x25, fix ldisc->open retvalJiri Slaby
We should never return positive values from ldisc->open, tty layer doesn't (and never did) expect that. If we do that, weird things like warnings in tty_ldisc_close happen. Not sure if dev->base_addr is used somehow now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: linux-x25@vger.kernel.org Tested-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) af_unix: limit recursion level pch_gbe driver: The wrong of initializer entry pch_gbe dreiver: chang author ucc_geth: fix ucc halt problem in half duplex mode inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners ehea: Add some info messages and fix an issue hso: fix disable_net NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty cxgb4vf: fix setting unicast/multicast addresses ... net, ppp: Report correct error code if unit allocation failed DECnet: don't leak uninitialized stack byte au1000_eth: fix invalid address accessing the MAC enable register dccp: fix error in updating the GAR tcp: restrict net.ipv4.tcp_adv_win_scale (#20312) netns: Don't leak others' openreq-s in proc Net: ceph: Makefile: Remove unnessary code vhost/net: fix rcu check usage econet: fix CVE-2010-3848 econet: fix CVE-2010-3850 econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849 ...
2010-11-29ath9k: fix software retry counter trackingFelix Fietkau
The recent tx path cleanups moved the software retry count tracking from the ath_buf to the skb cb, however the actual counter update referred to the wrong location, confusing block-ack window tracking. Fix this by using the retries counter in the struct ath_frame_info. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29Revert "ath9k_htc: Handle monitor mode properly for HTC devices"Rajkumar Manoharan
This reverts commit 446fad5a5b6be765c8ec39bfdbbc6c7aa63fbcbb. The change had broken the packet injection on monitoring mode. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29ath9k: Remove code which enables btcoex based on subsys idVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29ath9k: Reintroduce modparam to enable btcoexVasanthakumar Thiagarajan
It is not ideal to enable btcoex based on subsys id as it is not unique, they are so random. It is also a pain keeping all of them in a table to enable btcoex for a particular hw. Going back to the old idea. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29forcedeth: Use netdev_dbg for printk(KERN_DEBUGJoe Perches
Use the normal debugging functions. Print mac address when using random_ether_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: Remove netdev_dbg usesJoe Perches
These were probably just for initial driver debugging and have not been enabled in builds in git history. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: Convert dev_printk(<level> to dev_<level>(Joe Perches
Use vsprintf extension %pM for a mac address in one instance. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: Separate vendor specific initializations into functionsJoe Perches
Neaten the phy_init function by adding and calling vendor specific functions. object size is reduced by ~1kb: $ size drivers/net/forcedeth.o.* text data bss dec hex filename 83475 1848 19304 104627 198b3 drivers/net/forcedeth.o.new 84459 1848 19544 105851 19d7b drivers/net/forcedeth.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: Add function init_realtek_8211bJoe Perches
Deduplicate the code use for the init/reset of this device. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: Convert pr_<level> to netdev_<level>Joe Perches
Use netdev_<level> when a struct net_device * is available. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: Use pr_fmt and pr_<level>Joe Perches
Convert printks to pr_<level>. Remove "forcedeth: " from some calls as it's now added by pr_fmt. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: Convert remaining dprintk to netdev_dbgJoe Perches
The remaining dprintk uses are emitted as KERN_INFO. Change these dprintk uses to netdev_dbg. Remove the now unused dprintk macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: Use print_hex_dumpJoe Perches
Use the standard code to emit hex dumps. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: convert dprintk(KERN_DEBUG to netdev_dbgJoe Perches
Use the more standard macro to preface netdev->name. Fix casting on resource use. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29forcedeth: Change reg_delay arguments and useJoe Perches
Move the printk out of reg_delay and make the callers emit a message on error. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29carl9170: fix carl9170_tx_prepare typoChristian Lamparter
commit: "carl9170: revamp carl9170_tx_prepare" introduced a peculiar bug that would only show up if the the module parameter noht is set to 1. Then all outbound voice, video and background frames would each invoke a (bogus) RTS/CTS handshake. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29ath9k: Disable SWBA interrupt on remove_interfaceRajkumar Manoharan
while removing beaconing mode interface, SWBA interrupt was never disabled when there are no other beaconing interfaces. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29ath9k/carl9170: advertise P2PJohannes Berg
With some upcoming changes we'd like to use the interface types for P2P capability tests. Enable them now so that when we add those tests in wpa_supplicant, nothing will break. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29ath9k: use per-device struct for pm_qos_* operationsGabor Juhos
The ath9k driver uses a shared pm_qos_request_list structure for all devices. This causes the following warning if more than one device is present in the system: WARNING: at kernel/pm_qos_params.c:234 ath9k_init_device+0x5e8/0x6b0() pm_qos_add_request() called for already added request Modules linked in: Call Trace: [<802b1cdc>] dump_stack+0x8/0x34 [<8007dd90>] warn_slowpath_common+0x78/0xa4 [<8007de44>] warn_slowpath_fmt+0x2c/0x38 [<801b0828>] ath9k_init_device+0x5e8/0x6b0 [<801bc508>] ath_pci_probe+0x2dc/0x39c [<80176254>] pci_device_probe+0x64/0xa4 [<8019471c>] driver_probe_device+0xbc/0x188 [<80194854>] __driver_attach+0x6c/0xa4 [<80193e20>] bus_for_each_dev+0x60/0xb0 [<80193580>] bus_add_driver+0xcc/0x268 [<80194c08>] driver_register+0xe0/0x198 [<801764e0>] __pci_register_driver+0x50/0xe0 [<80365f48>] ath9k_init+0x3c/0x6c [<8006050c>] do_one_initcall+0xfc/0x1d8 [<80355340>] kernel_init+0xd4/0x174 [<800639a4>] kernel_thread_helper+0x10/0x18 ---[ end trace 5345fc6f870564a6 ]--- This patch fixes that warning by using a separate pm_qos_request_list sructure for each device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29libertas: fix invalid accessSven Neumann
card->priv must not be accessed after lbs_remove_card() was called as lbs_remove_card() frees card->priv via free_netdev(). For libertas_sdio this is a regression introduced by 23b149c1890f9. The correct fix to the issue described there is simply to remove the assignment. This flag is set at the appropriate time inside lbs_remove_card anyway. Reported-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29libertas: fix memory corruption in lbs_remove_card()Daniel Drake
"priv" is stored at the end of the wiphy structure, which is freed during the call to lbs_cfg_free(). It must not be touched afterwards. Remove the unnecessary NULL assignment causing this memory corruption. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-29Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-11-29pch_gbe driver: The wrong of initializer entryToshiharu Okada
The wrong of initializer entry was modified. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29pch_gbe dreiver: chang authorToshiharu Okada
This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake". I update the Kconfig, renamed "Topcliff" to "EG20T". Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28ucc_geth: fix ucc halt problem in half duplex modeYang Li
In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size), the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation of the QE Reference Manual. But that will sometimes cause tx halt while working in half duplex mode. According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO threshold size can cause UCC to halt), setting UTFTT less than [(UTFS x (M - 8)/M) - 128] will prevent this from happening (M is the minimum buffer size). The patch changes UTFTT back to 256. Signed-off-by: Li Yang <leoli@freescale.com> Cc: Jean-Denis Boyer <jdboyer@media5corp.com> Cc: Andreas Schmitz <Andreas.Schmitz@riedel.net> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28vmxnet3: fix compilation when RSS is disabledScott J. Goldman
If RSS is disabled, we can ifdef out some RSS specific code. This fixes the compile error found by Randy Dunlap. Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Reviewed-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28ehea: Add some info messages and fix an issueBreno Leitao
This patch adds some debug information about ehea not being able to allocate enough spaces. Also it correctly updates the amount of available skb. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28stmmac: fix stmmac_resume removing not yet used shutdown flagGiuseppe Cavallaro
The commit to convert to use the dev_pm_ops struct introduces a bug. The shutdown flag is not yet used because the hibernation on memory is done by using the freeze callback. Thanks to Vlad for having reported it. Reported-by: Vlad Lungu <vlad.lungu@windriver.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28forcedeth: use usleep_range not msleep for small sleepsSzymon Janc
Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28forcedeth: do not use assignment in if conditionsSzymon Janc
Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28forcedeth: include <linux/io.h> and <linux/uaccess.h> instead of <asm/io.h> ↵Szymon Janc
and <asm/uaccess.h> as suggested by checkpatch Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28forcedeth: remove unnecessary checks before kfreeSzymon Janc
Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28forcedeth: fix multiple code style issuesSzymon Janc
Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28zd1211rw: document need for kmalloc castJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28vxge: remove unnecessary [kv][mcz]alloc castsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28qlcnic: remove unnecessary [kv][mcz]alloc castsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28netxen: remove unnecessary [kv][mcz]alloc castsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 16:59:43 +0000