summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-01-10net: ethernet: arc: Probe emac after set RMII clockXing Zheng
After enter arc_emac_probe, emac will get_phy_id, phy_poll_reset and other connecting PHY via mdiobus_read, so we need to set correct ref clock rate for emac before probe emac. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10bnxt_en: Reset embedded processor after applying firmware upgradeRob Swindell
Use HWRM_FW_RESET command to request a self-reset of the embedded processor(s) after successfully applying a firmware update. For boot processor, the self-reset is currently deferred until the next PCIe reset. Signed-off-by: Rob Swindell <swindell@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10bnxt_en: Zero pad firmware messages to 128 bytes.Michael Chan
For future compatibility, zero pad all messages that the driver sends to the firmware to 128 bytes. If these messages are extended in the future with new byte enables, zero padding these messages now will guarantee future compatibility. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10ethernet: amd: au1000: Remove pointless warningAndrew Lunn
The warning about being able to read any MDIO device, not just the attached ethernet devices PHY applies to all MDIO drivers. So remove it. This also removes a reference to a member in phy_device which has moved. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: ethernet: faraday: Use phy_find_first() instead of open coding itGuenter Roeck
Use phy_find_first() to find the first phy device instead of open coding it. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: ethernet: broadcom: Fix build errorsGuenter Roeck
Commit 7f854420fbfe ("phy: Add API for {un}registering an mdio device to a bus") introduces an API to access mii_bus structures, but missed to update the sb1250 driver. This results in the following build error. drivers/net/ethernet/broadcom/sb1250-mac.c: In function 'sbmac_mii_probe': drivers/net/ethernet/broadcom/sb1250-mac.c:2360:24: error: 'struct mii_bus' has no member named 'phy_map' Use phy_find_first() instead of open coding it. Commit 2220943a21e2 ("phy: Centralise print about attached phy") introduces the following build error. drivers/net/ethernet/broadcom/sb1250-mac.c: In function 'sbmac_mii_probe': drivers/net/ethernet/broadcom/sb1250-mac.c:2383:20: error: 'phydev' undeclared Fixes: 7f854420fbfe ("phy: Add API for {un}registering an mdio device to a bus") Fixes: 2220943a21e2 ("phy: Centralise print about attached phy") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: lantiq_etop.c: Use helper to find first phyAndrew Lunn
Make use of the helper to find the first phy device. This also fixes the compile breakage. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10stmmac: Don't exit mdio registration when mdio subnode is not found in the DTSRomain Perier
Originally, most of the platforms using this driver did not define an mdio subnode in the devicetree. Commit e34d65 ("stmmac: create of compatible mdio bus for stmmac driver") introduced a backward compatibily issue by using of_mdiobus_register explicitly with an mdio subnode. This patch fixes the issue by calling the function mdiobus_register, when mdio subnode is not found. The driver is now compatible with both modes. Fixes: e34d65696d2e ("stmmac: create of compatible mdio bus for stmmac driver") Signed-off-by: Romain Perier <romain.perier@gmail.com> Tested-by: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: qmi_wwan: Add SIMCom 7230EKristian Evensen
SIMCom 7230E is a QMI LTE module with support for most "normal" bands. Manual testing has showed that only interface five works. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10udp: restrict offloads to one namespaceHannes Frederic Sowa
udp tunnel offloads tend to aggregate datagrams based on inner headers. gro engine gets notified by tunnel implementations about possible offloads. The match is solely based on the port number. Imagine a tunnel bound to port 53, the offloading will look into all DNS packets and tries to aggregate them based on the inner data found within. This could lead to data corruption and malformed DNS packets. While this patch minimizes the problem and helps an administrator to find the issue by querying ip tunnel/fou, a better way would be to match on the specific destination ip address so if a user space socket is bound to the same address it will conflict. Cc: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: Adding layer 2 multicast supportElad Raz
Add SWITCHDEV_OBJ_ID_PORT_MDB switchdev ops support. On first MDB insertion creates a new multicast group (MID) and add members port to the MID. Also add new MDB entry for the flooding-domain (fid-vid) and link the MDB entry to the newly constructed MC group. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: Adding VID to FID translatationElad Raz
Adding a generic function that translate VID to FID. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: Changing the maximum number of multicast group to a defineElad Raz
Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: reg: Adding SMID registerElad Raz
Adding back SMID register definition and packing. For each MC group a new SMID entry will be generated. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: reg: Add definition of multicast record for SFD registerElad Raz
Multicast-related records have specific format in SFD register. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09mlxsw: spectrum: remove FDB entry in case we get unknown object notificationJiri Pirko
It may happen that we get notification for FDB entry for object (port, lag, vport), which does not exist. Currently we ignore that, which only causes this being re-sent in next notification. The entry will never disappear. So get rid of it by simply removing it using SFD register. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09mlxsw: spectrum: pass local_port to mlxsw_sp_port_fdb_uc_opJiri Pirko
Do not pass struct mlxsw_sp_port to mlxsw_sp_port_fdb_uc_op and rather just pass local_port. This is needed in case this is called from SFN process function and mlxsw_sp_port is not existent for particular local_port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09vxlan: fix test which detect duplicate vxlan ifaceNicolas Dichtel
When a vxlan interface is created, the driver checks that there is not another vxlan interface with the same properties. To do this, it checks the existing vxlan udp socket. Since commit 1c51a9159dde, the creation of the vxlan socket is done only when the interface is set up, thus it breaks that test. Example: $ ip l a vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip l a vxlan11 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip -br l | grep vxlan vxlan10 DOWN f2:55:1c:6a:fb:00 <BROADCAST,MULTICAST> vxlan11 DOWN 7a:cb:b9:38:59:0d <BROADCAST,MULTICAST> Instead of checking sockets, let's loop over the vxlan iface list. Fixes: 1c51a9159dde ("vxlan: fix race caused by dropping rtnl_unlock") Reported-by: Thomas Faivre <thomas.faivre@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09net: plip: use new parport device modelSudip Mukherjee
Modify plip driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09cdc-acm: fix NULL pointer referenceOliver Neukum
The union descriptor must be checked. Its usage was conditional before the parser was introduced. This is important, because many RNDIS device, which also use the common parser, have bogus extra descriptors. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: Vasily Galkin <galkin-vv@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08r8152: adjust ALDPS functionhayeswang
Replace disable_aldps() and enable_aldps() with aldps_en(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08r8152: use test_and_clear_bithayeswang
Replace test_bit() followed by clear_bit() with test_and_clear_bit(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08r8152: fix the wake eventhayeswang
When the autosuspend is enabled and occurs before system suspend, we should wake the device before running system syspend. Then, we could change the wake event for system suspend. Otherwise, the device would resume the system when receiving any packet. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08phy: micrel: Fix finding PHY properties in MAC node for KSZ9031.Roosen Henri
Commit 651df2183543 ("phy: micrel: Fix finding PHY properties in MAC node.") only fixes finding PHY properties in MAC node for KSZ9021. This commit applies the same fix for KSZ9031. Fixes: 8b63ec1837fa ("phylib: Make PHYs children of their MDIO bus, not the bus' parent.") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Henri Roosen <henri.roosen@ginzinger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08Merge branch 'for-linus' into work.miscAl Viro
2016-01-08Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-01-08 This series contains updates to ixgbe only. Vasu provides three fixes for ixgbe, first assigns a minimum credit to a traffic class to resolve a Tx hang for CEE mode configuration. Second fix changes the driver to use netdev->fcoe_ddp_xid instead of our local IXGBE_FCOE_DDP_MAX, since it is correctly set for our different devices and avoids a DDP skip error on X550. Lastly fix the PFC configuration to include X550 devices. Emil provides a fix for reporting the speed in ethtool by using the stored value in out adapter structure. This is due to external drivers may end up with unknown speed when calling ethtool_get_settings(). Mark fixes the handling of any outer UDP checksum, by passing the skb up with CHECKSUM_NONE when an outer UDP checksum is set. This will cause the stack to check the checksum, also do not increment an error counter because we do not really know if there is an actual error. Ixgbe ATR was not handling IPv6 extended headers, so ATR is not being performed on such packets. Fix this by skipping extended headers when they are present. Usha fixes an issue with X550 and getting FDMI HBA attributes when FCoE support is enabled. Neerav fixes an issue for X550 when FCoE and SR-IOV are enabled, which the hardware generates MDD events. Resolve this by setting the expected values in the transmit context descriptors for FCoE/FIP frames and adding a flush after writing the RDLEN register. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08irda: toim3232-sir: delete some dead codeDan Carpenter
I noticed this code because it has a typo in the module_param(), the "trs" at the end of "toim3232fliptrs" should be "rts". But it's dead code so instead of fixing it, I just deleted it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-01-08 Here's one more bluetooth-next pull request for the 4.5 kernel: - Support for CRC check and promiscuous mode for CC2520 - Fixes to btmrvl driver - New ACPI IDs for hci_bcm driver - Limited Discovery support for the Bluetooth mgmt interface - Minor other cleanups here and there Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08ixgbe: Make ATR recognize IPv6 extended headersMark Rustad
Right now ATR is not handling IPv6 extended headers, so ATR is not being performed on such packets. Fix that by skipping extended headers when they are present. This also fixes a problem where the ATR code was not checking that the inner protocol was actually TCP before setting up the signature rules. Since the protocol check is intimately involved with the extended header processing as well, this all gets fixed together. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Fix MDD events generated when FCoE+SRIOV are enabledNeerav Parikh
When FCoE is enabled with SR-IOV on the X550 NIC the hardware generates MDD events. This patch fixes these by setting the expected values in the Tx context descriptors for FCoE/FIP frames and adding a flush after writing the RDLEN register. Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Fix to get FDMI HBA attributes information with X550Usha Ketineni
Check whether the FCOE support is enabled for the devices to get the FDMI HBA attributes information instead of checking each device id. Also, add Model string information for X550. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Correct handling of any outer UDP checksum settingMark Rustad
If an outer UDP checksum is set, pass the skb up with CHECKSUM_NONE so that the stack will check the checksum. Do not increment an error counter, because we don't know that there is an actual error. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: do not call check_link for ethtool in ixgbe_get_settings()Emil Tantilov
In ixgbe_get_settings() the link status and speed of the interface are determined based on a read from the LINKS register via the call to mac.ops.check.link(). This can cause issues where external drivers may end up with unknown speed when calling ethtool_get_setings(). Instead of calling the mac.ops.check_link() we can report the speed from the adapter structure which is populated by the driver. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: fix broken PFC with X550Vasu Dev
PFC is configuration is skipped for X550 devices due to a incorrect device id check, fixing that to include X550 PFC configuration. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: use correct FCoE DDP max checkVasu Dev
Use fcoe_ddp_xid from netdev as this is correctly set for different device IDs to avoid DDP skip error on X550 as "xid=0x20b out-of-range" Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08ixgbe: Fill at least min credits to a TC credit refillsVasu Dev
Currently credit_refill and credit_max could be zero for a TC and that is causing Tx hang for CEE mode configuration, so to fix that have at min credit assigned to a TC and that is as what IEEE mode already does. Change-ID: If652c133093a21e530f4e9eab09097976f57fb12 Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: remove forever unused IDJesse Brandeburg
Somehow an ID that has never been productized is in the code. There are no plans to use it, so just get rid of it. Change-ID: I59117d48ea9ee0360b0fe33833ac8092f8a24b4c Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: Fix Rx hash reported to the stack by our driverAnjali Singhai Jain
If the driver calls skb_set_hash even with a zero hash, that indicates to the stack that the hash calculation is offloaded in hardware. So the Stack doesn't do a SW hash which is required for load balancing if the user decides to turn of rx-hashing on our device. This patch fixes the path so that we do not call skb_set_hash if the feature is disabled. Change-ID: Ic4debfa4ff91b5a72e447348a75768ed7a2d3e1b Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: Look up MAC address in Open Firmware or IDPROMSowmini Varadhan
This is the i40e equivalent of commit c762dff24c06 ("ixgbe: Look up MAC address in Open Firmware or IDPROM"). As with that fix, attempt to look up the MAC address in Open Firmware on systems that support it, and use IDPROM on SPARC if no OF address is found. In the case of the i40e there is an assumption that the default mac address has already been set up as the primary mac filter on probe, so if this filter is obtained from the Open Firmware or IDPROM, an explicit write is needed via i40e_aq_mac_address_write() and i40e_aq_add_macvlan() invocation. The I40E_FLAG_PF_MAC flag in the platform-private i40e_pf structure tracks whether a platform-specific mac address was found, in which case calls to i40e_aq_mac_address_write() and i40e_aq_add_macvlan() will be triggered. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: allow zero MAC address for VFsMitch Williams
Allow the user to specify a zero MAC address for VFs. This removes the existing MAC address and allows the VF to use a random address. Libvirt does this normally when removing a VF from a VM. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: change log messages and error returnsMitch Williams
When VFs are being reset, there is a brief window of time when they cannot be configured because they don't have a VSI to configure. If a script is quick, it can fall through that window. To avoid defenestration, log a useful error message and return -EAGAIN. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08brcmfmac: Do not handle link downs for ibss.Hante Meuleman
Sometimes on module reload and reconnect to ibss a deauth from other station can be received. This is treated as a link down but for ibss this is wrong. It will close the interface and no data is possible. Ignore the firmware generated link down events in ibss mode, as ibss is always teared down by cfg80211. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: use jiffies for timeout in btcoexArend van Spriel
The btcoex uses a timeout which was in milliseconds and got converted to jiffies upon using timer api. Instead, convert it to jiffies and treat it as such further. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: use msecs_to_jiffies() in macro definitionsArend van Spriel
Instead to having macro definition for millisecond timeout have the definition directly in jiffies. This makes the unit of the value immediately clear and may result in code that is bit more compact. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: change brcmf_sdio_wd_timer() prototypeArend van Spriel
The function brcmf_sdio_wd_timer() has wdtick parameter. However, it is only called with two values and as such the parameter is replaced with boolean value indicating the timer should be active or not. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: Reshuffle functions to avoid forward declarationsHante Meuleman
Function prototype forward declarations are to be avoided. This patch shuffles some of the functions so the forward declarations can be removed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-08brcmfmac: Add wowl net detect supportHante Meuleman
With wowl net detect it becomes possible to scan for specific ssids and wakeup once found. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07net: lan78xx: Fix to write to OTP(One Time Programmable) per magic number.Woojung.Huh@microchip.com
This patch fixes a bug writing to EEPROM in lan78xx_ethtool_set_eeprom() when asked to write to OTP. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: macb: Add NP4 macb config using USRIO_DISABLEDNeil Armstrong
Declare a new NP4 SoC variant having USRIO_DISABLED as capability bit. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: ethernet: cadence-macb: Add disabled usrio capsNeil Armstrong
On some platforms, the macb integration does not use the USRIO register to configure the (R)MII port and clocks. When the register is not implemented and the MACB error signal is connected to the bus error, reading or writing to the USRIO register can trigger some Imprecise External Aborts on ARM platforms. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 10:44:05 +0000