summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-01-07Merge tag 'iwlwifi-next-for-kalle-2016-01-07_2' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * bug fixes and improvements for firmware debug system (Golan and myself) * fixes for D0i3 (Eliad) * prevent muliple stations with the same MAC address * advertise support for Rx A-MSDU in A-MPDU * scan related fixes * support -20.ucode * fix WoWLAN for iwldvm * preparations towards multiple Rx queues * platform power improvements for GO mode when no clients are associated
2016-01-07Merge ath-next from ath.gitKalle Valo
No major changes to list.
2016-01-07mdio: Abstract device_remove() and device_free()Andrew Lunn
Make device_free and device_remove operations in the mdio device structure, so the core code does not need to differentiate between phy devices and generic mdio devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Add support for mdio drivers.Andrew Lunn
Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers are PHY drivers. Add support for generic MDIO drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio_bus: Add comment to mdiobus_scan() and __mdiobus_register()Andrew Lunn
Make it clear that mdiobus_scan () will only find devices which have a vendor/product ID in registers 2 and 3. These are typically PHY devices. Other sort of MDIO devices, such as switches, are not expected to be found during the scan. Similarly, __mdiobus_register(), which calls mdiobus_scan() will only find PHY devices, and other sorts of MDIO devices are expected to be instantiated from device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio_bus: Generalise of_mdiobus_link_phydev()Andrew Lunn
This function should work with any sort of MDIO device which can be probed on the bus, not just PHY devices. So generalise it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Move phy specific bus match into phy_deviceAndrew Lunn
Matching a driver to a device has both generic parts, and parts which are specific to PHY devices. Move the PHY specific parts into phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralize setting driver module ownerAndrew Lunn
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Move PHY PM operations into phy_deviceAndrew Lunn
The MDIO PM operations are really PHY device PM operations. So move them into phy_device. This will be needed when we support devices on the mdio bus which are not PHYs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy_device: Move phy attributes into phy_deviceAndrew Lunn
The mdio_bus exports three attributes: - PHY ID is the unique 32-bits identifier for a MDIO device implementing standard MII registers MII_PHYSID1/2, which is not guaranteed to be the case for non-standard compliant devices (e.g: Ethernet switches) - PHY interface describes the data-path of the PHY/MDIO device, which is not strictly a PHY thing, but is required and needed for PHY devices to function, a MDIO device could be a control device exclusively - PHY has fixups describes what the PHY driver may have done, so completely PHY specific These are all phy attributes, not generic mdio attributes. So move the attributes into the phy device code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: mdio-octeon: Use devm_mdiobus_alloc_size()Andrew Lunn
Rather than use devm_kzalloc(), use the mdio helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: phy_{read|write}_mmd_indirect: get addr from phydevAndrew Lunn
The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: dnet: Use phy_find_first() helperAndrew Lunn
Replace the open coded search for the first phy with a call to the existing helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add phydev_err() and phydev_dbg() macrosAndrew Lunn
In preparation for moving some of the phy_device structure members, add macros for printing errors and debug information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Use phy_read() instead of mdiobus_read()Andrew Lunn
Since we have a phydev, make use of it and the phy_read() function. This will help with later refactoring. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07iwlwifi: pcie: properly configure the debug buffer size for 8000Emmanuel Grumbach
8000 device family has a new debug engine that needs to be configured differently than 7000's. The debug engine's DMA works in chunks of memory and the size of the buffer really means the start of the last chunk. Since one chunk is 256-byte long, we should configure the device to write to buffer_size - 256. This fixes a situation were the device would write to memory it is not allowed to access. CC: <stable@vger.kernel.org> [4.1+] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: fix memory leaks in error paths upon fw error dumpEmmanuel Grumbach
When iwl_mvm_fw_error_dump fails, it needs to clear the state in mvm, which includes: * clear IWL_MVM_STATUS_DUMPING_FW_LOG * set mvm->fw_dump_trig to NULL * free the description While at it, remove a NULL check in iwl_mvm_free_fw_dump_desc since kfree is NULL safe. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: constify the parameters of a few functions in fw-dbg.cEmmanuel Grumbach
The debug functions of fw-dbg.c don't really need to modify the trigger and the description they receive as a parameter. Constify the pointers. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: check minimum temperature notification lengthJohannes Berg
This notification will be extended with extra data, so just check that it has a minimum length, not the exact length; we might later add handling for the extra fields added and have more code to handle both versions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: initialize gtkdata->mvm correctlyEliad Peller
gtkdata->mvm wasn't set in iwl_mvm_d0i3_update_keys, resulting in kernel panic in some flows (when mvm is actually used...) Fixes: a3f7ba5c8825 ("iwlwifi: update key params on d0i3 entrance/exit") Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: check PN for CCMP/GCMP in the driverJohannes Berg
As we're working on multi-queue RX, we want to parallelise checking the PN in order to avoid having to serialise the RX processing. It may seem that doing parallel PN checking is insecure, but it turns out to be OK because queue assignment is done based on the data in the frame (IP/TCP) and thus cannot be manipulated by an attacker, since the data is encrypted and must first have been decrypted successfully. There are some corner cases, in particular when the peer starts using fragmentation which redirects the packet to the default queue. However this redirection is remembered (for the STA, per TID) and thus cannot be exploited by an attacker either. Leave checking on the default queue (queue 0) to mac80211, since we get fragmented packets there and those are subject to stricter checks during reassembly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: don't ask beacons when P2P GO vif and no assoc staAyala Beker
The commit below called iwl_mvm_mac_ctxt_changed() to handle a case that the vif is a P2P GO. However iwl_mvm_mac_ctxt_cmd_go() ignores the number of associated stations and asks the FW to pass beacons anyways. Fix this by checking ap_assoc_sta_count parameter, in iwl_mvm_mac_ctxt_cmd_go() as well, and ask the FW to pass beacons only when there's at least one associated station. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: prevent multiple stations with the same addressJohannes Berg
As the device (and parts of the driver) cannot deal with having the same MAC address for two stations (on two virtual interfaces), add some explicit code to prevent this case. Note that in practice this cannot happen since the device doesn't support operating with two AP/GO interfaces at the same time either, and other scenarios for this are, while not impossible, not going to happen in practice. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: remove useless WARN_ON and rely on cfg80211's combinationEmmanuel Grumbach
We advertise one STATION vif only, so this just can't happen. Remove this useless WARN_ON. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: support A-MSDU in A-MPDUJohannes Berg
Since A-MPDU deaggregation is done in hardware, and A-MSDU deaggregation is done in software, there's no reason not to support A-MSDU in A-MPDU; set the flag to support it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: add a non-trigger window to fw dbg triggersGolan Ben-Ami
Allow the user to configure a non-trigger session - a window between triggers in which the driver won't collect fw debug data. This can be useful when the frequent collection of fw data has an impact on the performance, such as debugging tx flows. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: dump the radio registers when the firmware crashesEmmanuel Grumbach
Dumping the content of the radio registers greatly helps to debug PHY issues, which can lead to TFD queue hang. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: fix extended dwell timeDavid Spinadel
FW adds 10 msec for every dwell time in low band, so we need to set 10 msec less. Don't use extended dwell time when fragmented scan is needed because FW adds 3 msec per probe and it can easily exceed max out of channel time. Fixes: c3e230b167a9 ("iwlwifi: mvm: add extended dwell time") Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: nvm: fix loading default NVM fileOren Givon
Fix loading the default NVM file, in the case where the requested NVM file isn't found in the file system. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: bump max API to 20Emmanuel Grumbach
7265D and up are now able to handle -20.ucode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: set max firmware version of 7265 to 17Emmanuel Grumbach
Just like 7260, 7265 will not have firmware releases newer than iwlwifi-7265-17.ucode. 7265D is still supported in latest firmware releases. Fixes: 628a2918afe4 ("iwlwifi: separate firmware version for 7260 devices") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: reset mvm->scan_type when firmware is startedEmmanuel Grumbach
If we don't reset the scan type when the firmware is started, we will think the firmware is still configured after the interface has been brought down. When we will bring it up again, we will not configure the scan type in firmware and it will crash with the following assert: 0x0000100A | ADVANCED_SYSASSERT Fixes: 355346ba3050 ("iwlwifi: mvm: configure scheduled scan according to traffic conditions") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: change mcc update APIMatti Gottlieb
New functionality for testing that is not relevant for this driver has been added. This required an API change. Add new cmd & response versions for the MCC update cmd & response. Add new TLV indicating that the FW is using the new API. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: mvm: let the firmware choose the antenna for beaconsEmmanuel Grumbach
The firmware knows better what antenna to choose. Old firmware still need the setting, so use a flag to know if the driver should choose the antenna or if the firmware can do it iself. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: update and fix 7265 series PCI IDsOren Givon
Update and fix some 7265 PCI IDs entries. CC: <stable@vger.kernel.org> [3.13+] Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07iwlwifi: dvm: fix WoWLANEmmanuel Grumbach
My commit below introduced a mutex in the transport to prevent concurrent operations. To do so, it added a flag (is_down) to make sure the transport is in the right state. This uncoverred an bug that didn't cause any harm until now: iwldvm calls stop_device and then starts the firmware without calling start_hw in between. While this flow is fine from the device configuration point of view (register, etc...), it is now forbidden by the new is_down flag. This led to this error to appear: iwlwifi 0000:05:00.0: Can't start_fw since the HW hasn't been started and the suspend would fail. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=109591 CC: <stable@vger.kernel.org> [4.3+] Reported-by: Bogdan Bogush <bogdan.s.bogush@gmail.com> Fixes=fa9f3281cbb1 ("iwlwifi: pcie: lock start_hw / start_fw / stop_device") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-01-07wcn36xx: split DMA mask register writing.Fengwei Yin
Per comments from Bjorn Andersson <bjorn.andersson@sonymobile.com>, split DMA mask register writing as seperate patch in case we need bi-sect in the furture. Signed-off-by: Fengwei Yin <fengwei.yin@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07wcn36xx: handle rx skb allocation failure to avoid system crashFengwei Yin
Lawrence reported that git clone could make system crash on a Qualcomm ARM soc based device (DragonBoard, 1G memory without swap) running 64bit Debian. It's turned out the crash is related with rx skb allocation failure. git could consume more than 600MB anonymous memory. And system is in extremely memory shortage case. But driver didn't handle the rx allocation failure case. This patch doesn't submit skb to upper layer if rx skb allocation fails. Instead, it reuse the old skb for rx DMA again. It's more like drop the packets if system is in memory shortage case. With this change, git clone is OOMed instead of system crash. Reported-by: King, Lawrence <lking@qti.qualcomm.com> Signed-off-by: Fengwei Yin <fengwei.yin@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07ath9k: fix ath9k_hw_nvram_check_version()Dan Carpenter
There is a type bug so it always returns success. Fixes: 6fa658fd5ab2 ('ath9k: Simplify and fix eeprom endianness swapping') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07ath9k: Enable support for cloned SKBSPawel Kulakowski
Ath9k driver does not modify tx skbs, so SUPPORTS_CLONED_SKBS flag can be set. Enabling this flag significant reduce number of copy operation during TCP Tx. This is especially noticeable on platforms with slower CPU (lower CPU usage brings profits in better TCP Tx troughput results). Tested on MIPS with 560 MHz clock Without CLONED_SKBS flag: TCP Tx 145 Mb/s (iperf result) __copy_user_common consumes 12.9% of CPU (result from perf tool) 0% CPU Idle With CLONED_SKBS flag: TCP Tx 170 Mb/s (iperf result) __copy_user_common consumes 1.8% of CPU (result from perf tool) 12% CPU Idle Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07wil6210: support for platform specific crash recoveryLior David
Added a simple interface for platform to perform crash recovery. When firmware crashes, wil driver can notify the platform which can trigger a crash recovery process. During the process the platform can request a ram dump from the wil driver as well as control when firmware recovery will start. This interface allows the platform to implement a more advanced crash recovery, for example to reset dependent subsystems in proper order, or to provide its own notifications during the recovery process. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07wil6210: fix kernel OOPS when stopping interface during Rx trafficHamad Kadmany
When network interface is stopping, some resources may be already released by the network stack, and Rx frames cause kernel OOPS (observed one is in netfilter code) Proper solution is to drop packets pending in reorder buffer. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07ath10k: set SM power save disabled to default valuePeter Oh
Use SMPS disabled as default because FW does not indicate any support of SMPS. This change will help STAs out that don’t support SMPS from sticking on 1SS, since they don’t have method to change it back to multiple chains. This change also should not affect power consumption of STAs supporting SMPS, because they are capable to switch the mode to dynamic or static either at the end of frame sequence or by using SMPS action frame. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-01-07rt2x00pci: Disable memory-write-invalidate when the driver exitsJia-Ju Bai
The driver calls pci_set_mwi to enable memory-write-invalidate when it is initialized, but does not call pci_clear_mwi when it is removed. Many other drivers calls pci_clear_mwi when pci_set_mwi is called, such as r8169, 8139cp and e1000. This patch adds pci_clear_mwi in error handling and removal procedure, which can fix the problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-01-07brcmfmac: introduce module parameter to force successful probeArend van Spriel
The module parameter can be used to ensure the probe succeeds thus claiming the device and allowing post-mortem debugging in case of firmware crash. It is only available when select CONFIG_BRCMDBG. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-13 23:26:31 +0000