summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-01-04bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.Michael Chan
Add logic to calculate how many shared or non shared rings can be supported. Default is to use shared rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Re-structure ring indexing and mapping.Michael Chan
In order to support dedicated or shared completion rings, the ring indexing and mapping are re-structured as below: 1. bp->grp_info[] array index is 1:1 with bp->bnapi[] array index and completion ring index. 2. rx rings 0 to n will be mapped to completion rings 0 to n. 3. If tx and rx rings share completion rings, then tx rings 0 to m will be mapped to completion rings 0 to m. 4. If tx and rx rings use dedicated completion rings, then tx rings 0 to m will be mapped to completion rings n + 1 to n + m. 5. Each tx or rx ring will use the corresponding completion ring index for doorbell mapping and MSIX mapping. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Check for NULL rx or tx ring.Michael Chan
Each bnxt_napi structure may no longer be having both an rx ring and a tx ring. Check for a valid ring before using it. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Separate bnxt_{rx|tx}_ring_info structs from bnxt_napi struct.Michael Chan
Currently, an rx and a tx ring are always paired with a completion ring. We want to restructure it so that it is possible to have a dedicated completion ring for tx or rx only. The bnxt hardware uses a completion ring for rx and tx events. The driver has to process the completion ring entries sequentially for the rx and tx events. Using a dedicated completion ring for rx only or tx only has these benefits: 1. A burst of rx packets can cause delay in processing tx events if the completion ring is shared. If tx queue is stopped by BQL, this can cause delay in re-starting the tx queue. 2. A completion ring is sized according to the rx and tx ring size rounded up to the nearest power of 2. When the completion ring is shared, it is sized by adding the rx and tx ring sizes and then rounded to the next power of 2, often with a lot of wasted space. 3. Using dedicated completion ring, we can adjust the tx and rx coalescing parameters independently for rx and tx. The first step is to separate the rx and tx ring structures from the bnxt_napi struct. In this patch, an rx ring and a tx ring will point to the same bnxt_napi struct to share the same completion ring. No change in ring assignment and mapping yet. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Refactor bnxt_dbg_dump_states().Michael Chan
By adding 3 separate functions to dump the different ring states. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04switch wireless debugfs ->write() instances to memdup_user_nul()Al Viro
again, it only parses the contents of the copied buffer, so get_zeroed_page() might as well had been kmalloc(), which makes it open-coded memdup_user_nul() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04convert a bunch of open-coded instances of memdup_user_nul()Al Viro
A _lot_ of ->write() instances were open-coding it; some are converted to memdup_user_nul(), a lot more remain... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04Merge branch 'memdup_user_nul' into work.miscAl Viro
2016-01-03ieee802154: cc2520: Check CRC & add promiscuousBrad Campbell
This patch adds checking the "CRC_OK" bit at the end of packets coming from the CC2520 radio. It also adds support for putting the radio in promiscuous mode (in which packets are not dropped if the CRC fails). In promiscuous mode the AUTOCRC flag is cleared so that the driver can pass the received CRC to the monitors. The radio now defaults to frame filtering (checking that the destination and PANID in the incoming packet matches the local node). This matches the other 15.4 radios and is what a user would expect to be the default. Other changes: 1. Adds LQI calculation 2. Makes #defines for relevant bit fields in CC2520 registers Signed-off-by: Brad Campbell <bradjc5@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Prevent XFRM per-cpu counter updates for one namespace from being applied to another namespace. Fix from DanS treetman. 2) Fix RCU de-reference in iwl_mvm_get_key_sta_id(), from Johannes Berg. 3) Remove ethernet header assumption in nft_do_chain_netdev(), from Pablo Neira Ayuso. 4) Fix cpsw PHY ident with multiple slaves and fixed-phy, from Pascal Speck. 5) Fix use after free in sixpack_close and mkiss_close. 6) Fix VXLAN fw assertion on bnx2x, from Yuval Mintz. 7) natsemi doesn't check for DMA mapping errors, from Alexey Khoroshilov. 8) Fix inverted test in ip6addrlbl_get(), from ANdrey Ryabinin. 9) Missing initialization of needed_headroom in geneve tunnel driver, from Paolo Abeni. 10) Fix conntrack template leak in openvswitch, from Joe Stringer. 11) Mission initialization of wq->flags in sock_alloc_inode(), from Nicolai Stange. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close net, socket, socket_wq: fix missing initialization of flags drivers: net: cpsw: fix error return code openvswitch: Fix template leak in error cases. sctp: label accepted/peeled off sockets sctp: use GFP_USER for user-controlled kmalloc qlcnic: fix a loop exit condition better net: cdc_ncm: avoid changing RX/TX buffers on MTU changes geneve: initialize needed_headroom ipv6: honor ifindex in case we receive ll addresses in router advertisements addrconf: always initialize sysctl table data ipv6/addrlabel: fix ip6addrlbl_get() switchdev: bridge: Pass ageing time as clock_t instead of jiffies sh_eth: fix 16-bit descriptor field access endianness too veth: don’t modify ip_summed; doing so treats packets with bad checksums as good. net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card natsemi: add checks for dma mapping errors rhashtable: Kill harmless RCU warning in rhashtable_walk_init openvswitch: correct encoding of set tunnel action attributes ...
2015-12-31wil6210: fix a warning message conditionDan Carpenter
"iter" is -1 at the end of the loop and not zero. It means we don't print a warning message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-12-31ath9k_htc: fix handling return value of ath9k_hw_calibrateAndrzej Hajda
The function can return negative values in case of error. Its result should be then tested for such case. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-12-31ath10k: reduce indentation by moving powersave check within functionRajkumar Manoharan
For devices that does not support PCI power save, force wake up API is used. So move powersave check inside force wakeup to reduce one level indentation. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-12-31ath10k: wake up device before accessing registersRajkumar Manoharan
commit 1aaf8efba0ae ("ath10k: disable PCI PS for QCA988X and QCA99X0") partially reverts pci soc powersave support added by commit 77258d409ce4 ("ath10k: enable pci soc powersaving"). While reverting the change, pci wake up function is called after accessing pci registers instead of prior to access. The assumption is that chip is woken up before accessing its registers.Though this change does not fix any known issues, this might help to avoid unknown or low power platform specific issues. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-12-31prism54: fix checks for dma mapping errorsAlexey Khoroshilov
prism54 checks for dma mapping errors by comparison returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-31wlcore/wl12xx: spi: fix NULL pointer dereference (Oops)Uri Mashiach
Fix the below Oops when trying to modprobe wlcore_spi. The oops occurs because the wl1271_power_{off,on}() function doesn't check the power() function pointer. [ 23.401447] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 23.409954] pgd = c0004000 [ 23.412922] [00000000] *pgd=00000000 [ 23.416693] Internal error: Oops: 80000007 [#1] SMP ARM [ 23.422168] Modules linked in: wl12xx wlcore mac80211 cfg80211 musb_dsps musb_hdrc usbcore usb_common snd_soc_simple_card evdev joydev omap_rng wlcore_spi snd_soc_tlv320aic23_i2c rng_core snd_soc_tlv320aic23 c_can_platform c_can can_dev snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap omap_wdt musb_am335x cpufreq_dt thermal_sys hwmon [ 23.453253] CPU: 0 PID: 36 Comm: kworker/0:2 Not tainted 4.2.0-00002-g951efee-dirty #233 [ 23.461720] Hardware name: Generic AM33XX (Flattened Device Tree) [ 23.468123] Workqueue: events request_firmware_work_func [ 23.473690] task: de32efc0 ti: de4ee000 task.ti: de4ee000 [ 23.479341] PC is at 0x0 [ 23.482112] LR is at wl12xx_set_power_on+0x28/0x124 [wlcore] [ 23.488074] pc : [<00000000>] lr : [<bf2581f0>] psr: 60000013 [ 23.488074] sp : de4efe50 ip : 00000002 fp : 00000000 [ 23.500162] r10: de7cdd00 r9 : dc848800 r8 : bf27af00 [ 23.505663] r7 : bf27a1a8 r6 : dcbd8a80 r5 : dce0e2e0 r4 : dce0d2e0 [ 23.512536] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : dc848810 [ 23.519412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 23.527109] Control: 10c5387d Table: 9cb78019 DAC: 00000015 [ 23.533160] Process kworker/0:2 (pid: 36, stack limit = 0xde4ee218) [ 23.539760] Stack: (0xde4efe50 to 0xde4f0000) [...] [ 23.665030] [<bf2581f0>] (wl12xx_set_power_on [wlcore]) from [<bf25f7ac>] (wlcore_nvs_cb+0x118/0xa4c [wlcore]) [ 23.675604] [<bf25f7ac>] (wlcore_nvs_cb [wlcore]) from [<c04387ec>] (request_firmware_work_func+0x30/0x58) [ 23.685784] [<c04387ec>] (request_firmware_work_func) from [<c0058e2c>] (process_one_work+0x1b4/0x4b4) [ 23.695591] [<c0058e2c>] (process_one_work) from [<c0059168>] (worker_thread+0x3c/0x4a4) [ 23.704124] [<c0059168>] (worker_thread) from [<c005ee68>] (kthread+0xd4/0xf0) [ 23.711747] [<c005ee68>] (kthread) from [<c000f598>] (ret_from_fork+0x14/0x3c) [ 23.719357] Code: bad PC value [ 23.722760] ---[ end trace 981be8510db9b3a9 ]--- Prevent oops by validationg power() pointer value before calling the function. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Cc: stable@vger.kernel.org Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-31wlcore/wl18xx: fw logger over sdioShahar Patury
Enable the FW Logger to work over the SDIO interface in addition to over UART interface. In the new design we use fw internal memory instead of packet ram that was used in older (wl12xx) design. This change reduces the impact on TP and stability. A new event was added to notify fw logger is ready for reading. Dynamic configuration to debugfs was added as well. Signed-off-by: Shahar Patury <shaharp@ti.com> Signed-off-by: Guy Mishol <guym@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-31phy: micrel: Add ethtool statistics countersAndrew Lunn
The PHY counters receiver errors and errors while idle. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-31phy: marvell: Add ethtool statistics countersAndrew Lunn
The PHY counters receiver errors and errors while idle. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30Merge tag 'wireless-drivers-for-davem-2015-12-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi * don't load firmware that won't exist for 7260 * fix RCU splat ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2015-12-29 This series contains updates to ixgbe and ixgbevf. William Dauchy provides a fix for ixgbevf that was implemented for ixgbe, commit 5d6002b7b822c7 ("ixgbe: Fix handling of NAPI budget when multiple queues are enabled per vector"). The issue was that the polling routine would increase the budget for receive to at least 1 per queue if multiple queues were present, which resulted in receive packets being processed when the budget was 0. Emil provides minor cleanups for ixgbevf, one being that we need to check rx_itr_setting with == and not &, since it is not a mask. Added QSFP PHY support in ixgbe to allow for more accurate reporting of port settings. Fixed the max RSS limit for X550 which is 63, not 64. Veola fixes ixgbe ethtool reporting of backplane type interfaces as 1000/10000baseT link modes, instead, report the media as KR, KX or KX4 based on the backplane interface present. Mark cleans up redundancy in the setting of hw_enc_features that makes it appear that X550 has more encapsulation features than other devices. Also do not set NETIF_F_SG any longer since that is set by the register_netdev() call. Also fixed the X550EM_x revision check, which needs to check a value, not just a bit. Alex Duyck fixes additional bugs in ixgbe_clear_vf_vlans(), one being that the mask was using a divide instead of a modulus, which resulted in the mask bit being incorrectly set to 0 or 1 based on the value of the VF being tested. Alex also found that he was not consistent in using the "word" argument as an offset or as a register offset, so made the code consistently use word as the offset in the array. v2: dropped patch 8 of the original series, as it was undoing a part of the fix Alex Duyck was doing in patch 9 of the original series. Dropped based on feedback from Emil (the author). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: bump up the driver version to 11.0.0.0Suresh Reddy
Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: support ethtool get-dump optionVenkat Duvvuru
This patch adds support for ethtool's --get-dump option in be2net, to retrieve FW dump. In the past when this option was not yet available, this feature was supported via the --register-dump option as a workaround. This patch removes support for FW-dump via --register-dump option as it is now available via --get-dump option. Even though the "ethtool --register-dump" cmd which used to work earlier, will now fail with ENOTSUPP error, we feel it is not an issue as this is used only for diagnostics purpose. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: fix port-res desc query of GET_PROFILE_CONFIG FW cmdSuresh Reddy
Commit 72ef3a88fa8e ("be2net: set pci_func_num while issuing GET_PROFILE_CONFIG cmd") passed a specific pf_num while issuing a GET_PROFILE_CONFIG cmd as FW returns descriptors for all functions when pf_num is zero. But, when pf_num is set to a non-zero value, FW does not return the Port resource descriptor. This patch fixes this by setting pf_num to 0 while issuing the query cmd and adds code to pick the correct NIC resource descriptor from the list of descriptors returned by FW. Fixes: 72ef3a88fa8e ("be2net: set pci_func_num while issuing GET_PROFILE_CONFIG cmd") Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: remove unused error variablesVenkat Duvvuru
eeh_error, fw_timeout, hw_error variables in the be_adapter structure are not used anymore. An earlier patch that introduced adapter->err_flags to store this information missed removing these variables. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: remove a line of code that has no effectSathya Perla
This patch removes a line of code that changes adapter->recommended_prio value followed by yet another assignment. Also, the variable is used to store the vlan priority value that is already shifted to the PCP bits position in the vlan tag format. Hence, the name of this variable is changed to recommended_prio_bits. Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: log digital signature errors while flashing FW imageSuresh Reddy
(based on a jumper setting on the adapter.) In this mode, the FW image when flashed is authenticated with a digital signature. This patch logs appropriate error messages and return a status to ethtool when errors relating to FW image authentication occur. Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: move FW flash cmd code to be_cmds.cSuresh Reddy
All code relating to FW cmds is in be_cmds.[ch] excepting FW flash cmd related code. This patch moves these routines from be_main.c to be_cmds.c Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: cleanup FW flash image related macro definesSuresh Reddy
Many constant definitions relating to the FW-image layout (such as section offset values) were defined in decimal format rather than hexa-decimal. This makes this part of the code un-readable. Also some defines related to BE2 are labeld "g2" and defines related to BE3 are labeled "g3". This patch cleans up all of this to make this code more readable. Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: avoid configuring VEPA mode on BE3Suresh Reddy
BE3 chip doesn't support VEPA mode. Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30be2net: fix VF link state transition from disabled to autoSuresh Reddy
The VF link state setting transition from "disable" to "auto" does not work due to a bug in SET_LOGICAL_LINK_CONFIG_V1 cmd in FW. This issue could not be fixed in FW due to some backward compatibility issues it causes with some released drivers. The issue has been fixed by introducing a new version (v2) of the cmd from 10.6 FW onwards. In v2, to set the VF link state to auto, both PLINK_ENABLE and PLINK_TRACK bits have to be set to 1. The VF link state setting feature now works on Lancer chips too from FW ver 10.6.315.0 onwards. Signed-off-by: Suresh Reddy <suresh.reddy@avagotech.com> Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-30rtlwifi: rtl_pci: Fix kernel panicLarry Finger
In commit 38506ecefab9 (rtlwifi: rtl_pci: Start modification for new drivers), a bug was introduced that causes a NULL pointer dereference. As this bug only affects the infrequently used RTL8192EE and only under low-memory conditions, it has taken a long time for the bug to show up. The bug was reported on the linux-wireless mailing list and also at https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/ as bug #1527603 (kernel crashes due to rtl8192ee driver on ubuntu 15.10). Fixes: 38506ecefab9 ("rtlwifi: rtl_pci: Start modification for new drivers") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rsi: bool tests do not need comparisonNicholas Mc Guire
This is an API consolidation only. Bool initializations should use true and false thus bool tests don't need an explicit comparison. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rsi: consolidate kmalloc/memset 0 calls to kzallocNicholas Mc Guire
This is an API consolidation only. The use of kmalloc + memset to 0 is equivalent to kzalloc. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: enable MSI interrupt support in pcieAvinash Patil
Newer pcie devices (8897 onwards) support MSI. This patch enables it. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: add missing check for PCIe8997 chipsetAmitkumar Karwar
This patch ensures mwifiex_pcie_txbd_empty() does take care of 8997 chipset. Fixes: 6d85ef00d9dfe ("mwifiex: add support for 8997 chipset") Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: fix PCIe register information for 8997 chipsetAmitkumar Karwar
This patch corrects some information in mwifiex_pcie_card_reg() structure for 8997 chipset Fixes: 6d85ef00d9dfe ("mwifiex: add support for 8997 chipset") Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: fix potential integer truncationchunfan chen
At some places, ie length is truncated from u16 to u8 while storing it to driver's internal variable. This patch fixes the problem. Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8192cu: Add missing parameter setupLarry Finger
This driver fails to copy the module parameter for software encryption to the locations used by the main code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8192ce: Fix handling of module parametersLarry Finger
The module parameter for software encryption was never transferred to the location used by the driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8192se: Fix module parameter initializationLarry Finger
Two of the module parameter descriptions show incorrect default values. In addition the value for software encryption is not transferred to the locations used by the driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8192de: Fix incorrect module parameter descriptionsLarry Finger
Two of the module parameters are listed with incorrect default values. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8188ee: Fix module parameter initializationLarry Finger
In this driver, parameters disable_watchdog and sw_crypto are never copied into the locations used in the main code. While modifying the parameter handling, the copying of parameter msi_support is moved to be with the rest. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8821ae: Fix errors in parameter initializationLarry Finger
This driver failed to copy parameters sw_crypto and disable_watchdog into the locations actually used by the driver. In addition, msi_support was initialized three times and one of them used the wrong variable. The initialization of parameter int_clear was moved so that it is near that of the rest of the parameters. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8723ae: Fix initialization of module parametersLarry Finger
This driver has some errors in the handling of module parameters. These include missing initialization for parameters msi_support and disable_watchdog. In addition, neither of these parameters nor sw_crypto are transferred into the locations used by the driver. A final fix is adding parameter msi to the module named and description macros. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30rtlwifi: rtl8723be: Fix module parameter initializationLarry Finger
This driver has a number of errors in the module initialization. These include the following: Parameter msi_support is stored in two places - one is removed. Paramters sw_crypto and disable_watchdog were never stored in the final locations, nor were they initialized properly. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: fix WPA connection problemchunfan chen
Device fails to connect to some AP's configured in WPA security mode. Currently IE buffer parsing logic in driver expects WPA IE to be present at the beginning of IE buffer. Otherwise connection is failed with 'incompatible network setting' error. This patch fixes the problem by improving IE buffer parsing logic. Signed-off-by: chunfan chen <jeffc@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: use world for unidentified region codeAmitkumar Karwar
It's better to use world if region code from EEPROM is unidentied instead of forcing it to FCC Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-30mwifiex: update region_code_index arrayAmitkumar Karwar
This array contains list of supported region codes. It is changed to make it aligned with region code to country mapping table in driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-14 11:50:08 +0000