summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-09-29i40e/i40evf: rename bytes_per_int to bytes_per_usecJacob Keller
This value is not calculating bytes_per_int, which would actually just be bytes/ITR_COUNTDOWN_START, but rather it's calculating bytes/usecs. Rename the variable for clarity so that future developers understand what the value is actually calculating. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-29Merge tag 'mlx5-fixes-2017-09-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2017-09-28 Misc. fixes for mlx5 drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Add DCB support when interacting with network stackYunsheng Lin
When using lldptool to configure DCB parameter, hclge_dcb module call the client_ops->setup_tc to tell network stack which queue and priority is using for specific tc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Setting for fc_mode and dcb enable flag in TM moduleYunsheng Lin
After the DCB feature is supported, fc_mode and dcb enable flag must be set according to the DCB parameter. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Add dcb netlink interface for the support of DCB featureYunsheng Lin
This patch add dcb netlink interface by calling the interface from hclge_dcb module. This patch also update Makefile in order to build hns3_dcbnl module. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Add hclge_dcb module for the support of DCB featureYunsheng Lin
The hclge_dcb module calls the interface from hclge_main/tm and provide interface for the dcb netlink interface. This patch also update Makefiles required to build the DCB supported code in HNS3 Ethernet driver and update the existing Kconfig file in the hisilicon folder. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Add some interface for the support of DCB featureYunsheng Lin
This patch add some interface and export some interface from hclge_tm and hclgc_main to support the upcoming DCB feature. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Add tc-based TM support for sriov enabled portYunsheng Lin
When sriov is enabled and TM is in tc-based mode, vf's TM parameters is not set in TM initialization process. This patch add the tc_based TM support for sriov enabled using the information in vport struct. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Add support for port shaper setting in TM moduleYunsheng Lin
This patch add a tm_port_shaper cmd and set port shaper to HCLGE_ETHER_MAX_RATE on TM initialization process. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Add support for PFC setting in TM moduleYunsheng Lin
This patch add a pfc_pause_en cmd, and use it to configure PFC option according to fc_mode in hdev->tm_info. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Add support for dynamically buffer reallocationYunsheng Lin
Current buffer allocation can only happen at init, when doing buffer reallocation after init, care must be taken care of memory which priv_buf points to. This patch fixes it by using a dynamic allocated temporary memory. Because we only do buffer reallocation at init or when setting up the DCB parameter, and priv_buf is only used at buffer allocation process, so it is ok to use a dynamic allocated temporary memory. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: hns3: Support for dynamically assigning tx buffer to TCYunsheng Lin
This patch add support of dynamically assigning tx buffer to TC when the TC is enabled. It will save buffer for rx direction to avoid packet loss. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28arp: make arp_hdr_len() return unsigned intAlexey Dobriyan
Negative ARP header length are not a thing. Constify arguments while I'm at it. Space savings: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3) function old new delta arpt_do_table 1163 1160 -3 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: dsa: mv88e6xxx: lock mutex when freeing IRQsVivien Didelot
mv88e6xxx_g2_irq_free locks the registers mutex, but not mv88e6xxx_g1_irq_free, which results in a stack trace from assert_reg_lock when unloading the mv88e6xxx module. Fix this. Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net-next/hinic: Fix a case of Tx Queue is Stopped foreverAviad Krawczyk
Fix the following scenario: 1. tx_free_poll is running on cpu X 2. xmit function is running on cpu Y and fails to get sq wqe 3. tx_free_poll frees wqes on cpu X and checks the queue is not stopped 4. xmit function stops the queue after failed to get sq wqe 5. The queue is stopped forever Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net-next/hinic: Set Rxq irq to specific cpu for NUMAAviad Krawczyk
Set Rxq irq to specific cpu for allocating and receiving the skb from the same node. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28cxgb4: make function ch_flower_stats_cb, fixes warningColin Ian King
The function ch_flower_stats_cb is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warnings: symbol 'ch_flower_stats_cb' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: stmmac: dwmac4: Re-enable MAC Rx before powering downEd Blake
Re-enable the MAC receiver by setting CONFIG_RE before powering down, as instructed in section 6.3.5.1 of [1]. Without this the MAC fails to receive WoL packets and never wakes up. [1] DWC Ethernet QoS Databook 4.10a October 2014 Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: stmmac: dwc-qos: Add suspend / resume supportEd Blake
Add hook to stmmac_pltfr_pm_ops for suspend / resume handling. Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: dsa: mv88e6xxx: Allow dsa and cpu ports in multiple vlansAndrew Lunn
Ports with the same VLAN must all be in the same bridge. However the CPU and DSA ports need to be in multiple VLANs spread over multiple bridges. So exclude them when performing this test. Fixes: b2f81d304cee ("net: dsa: add CPU and DSA ports as VLAN members") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: mvpp2: do not select the internal source clockAntoine Tenart
This patch stops the internal MAC Tx clock from being enabled as the internal clock isn't used. The definition used for the bit controlling this behaviour is renamed as well as it was wrongly named (bit 4 of GMAC_CTRL_2_REG). Fixes: 3919357fb0bb ("net: mvpp2: initialize the GMAC when using a port") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: mvpp2: fix port list indexingYan Markman
The private port_list array has a list of pointers to mvpp2_port instances. This list is allocated given the number of ports enabled in the device tree, but the pointers are set using the port-id property. If on a single port is enabled, the port_list array will be of size 1, but when registering the port, if its id is not 0 the driver will crash. Other crashes were encountered in various situations. This fixes the issue by using an index not equal to the value of the port-id property. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Yan Markman <ymarkman@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: mvpp2: fix parsing fragmentation detectionStefan Chulski
Parsing fragmentation detection failed due to wrong configured parser TCAM entry's. Some traffic was marked as fragmented in RX descriptor, even it wasn't IP fragmented. The hardware also failed to calculate checksums which lead to use software checksum and caused performance degradation. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28tun: bail out from tun_get_user() if the skb is emptyAlexander Potapenko
KMSAN (https://github.com/google/kmsan) reported accessing uninitialized skb->data[0] in the case the skb is empty (i.e. skb->len is 0): ================================================ BUG: KMSAN: use of uninitialized memory in tun_get_user+0x19ba/0x3770 CPU: 0 PID: 3051 Comm: probe Not tainted 4.13.0+ #3140 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: ... __msan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:477 tun_get_user+0x19ba/0x3770 drivers/net/tun.c:1301 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:245 ... origin: ... kmsan_poison_shadow+0x6e/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2732 __kmalloc_node_track_caller+0x351/0x370 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26a/0x810 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:903 alloc_skb_with_frags+0x1d7/0xc80 net/core/skbuff.c:4756 sock_alloc_send_pskb+0xabf/0xfe0 net/core/sock.c:2037 tun_alloc_skb drivers/net/tun.c:1144 tun_get_user+0x9a8/0x3770 drivers/net/tun.c:1274 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:245 ================================================ Make sure tun_get_user() doesn't touch skb->data[0] unless there is actual data. C reproducer below: ========================== // autogenerated by syzkaller (http://github.com/google/syzkaller) #define _GNU_SOURCE #include <fcntl.h> #include <linux/if_tun.h> #include <netinet/ip.h> #include <net/if.h> #include <string.h> #include <sys/ioctl.h> int main() { int sock = socket(PF_INET, SOCK_STREAM, IPPROTO_IP); int tun_fd = open("/dev/net/tun", O_RDWR); struct ifreq req; memset(&req, 0, sizeof(struct ifreq)); strcpy((char*)&req.ifr_name, "gre0"); req.ifr_flags = IFF_UP | IFF_MULTICAST; ioctl(tun_fd, TUNSETIFF, &req); ioctl(sock, SIOCSIFFLAGS, "gre0"); write(tun_fd, "hi", 0); return 0; } ========================== Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net/mlx5: Fix wrong indentation in enable SRIOV codeOr Gerlitz
Smatch is screaming: drivers/net/ethernet/mellanox/mlx5/core/sriov.c:112 mlx5_device_enable_sriov() warn: inconsistent indenting fix that. Fixes: 7ecf6d8ff154 ('IB/mlx5: Restore IB guid/policy for virtual functions') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5: Fix static checker warning on steering tracepoints codeMatan Barak
Fix this sparse complaint: drivers/net/ethernet/mellanox/mlx5/core/./diag/fs_tracepoint.h:172:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1) Fixes: d9fea79171ee ('net/mlx5: Add tracepoints') Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Fix calculated checksum offloads countersGal Pressman
Instead of calculating the offloads counters, count them explicitly. The calculations done for these counters would result in bugs in some cases, for example: When running TCP traffic over a VXLAN tunnel with TSO enabled the following counters would increase: tx_csum_partial: 1,333,284 tx_csum_partial_inner: 29,286 tx4_csum_partial_inner: 384 tx7_csum_partial_inner: 8 tx9_csum_partial_inner: 34 tx10_csum_partial_inner: 26,807 tx11_csum_partial_inner: 287 tx12_csum_partial_inner: 27 tx16_csum_partial_inner: 6 tx25_csum_partial_inner: 1,733 Seems like tx_csum_partial increased out of nowhere. The issue is in the following calculation in mlx5e_update_sw_counters: s->tx_csum_partial = s->tx_packets - tx_offload_none - s->tx_csum_partial_inner; While tx_packets increases by the number of GSO segments for each SKB, tx_csum_partial_inner will only increase by one, resulting in wrong tx_csum_partial counter. Fixes: bfe6d8d1d433 ("net/mlx5e: Reorganize ethtool statistics") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Don't add/remove 802.1ad rules when changing 802.1Q VLAN filterGal Pressman
Toggling of C-tag VLAN filter should not affect the "any S-tag" steering rule. Fixes: 8a271746a264 ("net/mlx5e: Receive s-tagged packets in promiscuous mode") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Print netdev features correctly in error messageGal Pressman
Use the correct formatting for netdev features. Fixes: 0e405443e803 ("net/mlx5e: Improve set features ndo resiliency") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Check encap entry state when offloading tunneled flowsVlad Buslov
Encap entries cached by the driver could be invalidated due to tunnel destination neighbour state changes. When attempting to offload a flow that uses a cached encap entry, we must check the entry validity and defer the offloading if the entry exists but not valid. When EAGAIN is returned, the flow offloading to hardware takes place by the neigh update code when the tunnel destination neighbour becomes connected. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Disallow TC offloading of unsupported match/action combinationsOr Gerlitz
When offloading header re-write, the HW may need to adjust checksums along the packet. For IP traffic, and a case where we are asked to modify fields in the IP header, current HW supports that only for TCP and UDP. Enforce it, in this case fail the offloading attempt for non TCP/UDP packets. Fixes: d7e75a325cb2 ('net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions') Fixes: 2f4fe4cab073 ('net/mlx5e: Add offloading of NIC TC pedit (header re-write) actions') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: Fix erroneous freeing of encap header bufferPaul Blakey
In case the neighbour for the tunnel destination isn't valid, we send a neighbour update request but we free the encap header buffer. This is wrong, because we still need it for allocating a HW encap entry once the neighbour is available. Fix that by skipping freeing it if we wait for neighbour. Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5: Check device capability for maximum flow countersRaed Salem
Added check for the maximal number of flow counters attached to rule (FTE). Fixes: bd5251dbf156b ('net/mlx5_core: Introduce flow steering destination of type counter') Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5: Fix FPGA capability locationInbar Karmy
Currently, FPGA capability is located in (mdev)->caps.hca_cur, change the location to be (mdev)->caps.fpga, since hca_cur is reserved for HCA device capabilities. Fixes: e29341fb3a5b ("net/mlx5: FPGA, Add basic support for Innova") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-28net/mlx5e: IPoIB, Fix access to invalid memory addressRoi Dayan
When cleaning rdma netdevice we need to save the mdev pointer because priv is released when we release netdev. This bug was found using the kernel address sanitizer (KASAN). use-after-free in mlx5_rdma_netdev_free+0xe3/0x100 [mlx5_core] Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-09-27mlxsw: spectrum: router: Don't ignore IPMR notificationsYotam Gigi
Make the Spectrum router logic not ignore the RTNL_FAMILY_IPMR FIB notifications. Past commits added the IPMR VIF and MFC add/del notifications via the fib_notifier chain. In addition, a code for handling these notifications in the Spectrum router logic was added. Make the Spectrum router logic not ignore these notifications and forward the requests to the Spectrum multicast router offloading logic. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27mlxsw: spectrum: Notify multicast router on RIF MTU changesYotam Gigi
Due to the fact that multicast routes hold the minimum MTU of all the egress RIFs and trap packets that don't meet it, notify the mulitcast router code on RIF MTU changes. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27mlxsw: spectrum_router: Add multicast routes notification handling functionalityYotam Gigi
Add functionality for calling the multicast routing offloading logic upon MFC and VIF add and delete notifications. In addition, call the multicast routing upon RIF addition and deletion events. As the multicast routing offload logic may sleep, the actual calls are done in a deferred work. To ensure the MFC object is not freed in that interval, a reference is held to it. In case of a failure, the abort mechanism is used, which ejects all the routes from the hardware and triggers the traffic to flow through the kernel. Note: At that stage, the FIB notifications are still ignored, and will be enabled in a further patch. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27mlxsw: spectrum: router: Squash the default route table to mainYotam Gigi
Currently, the mlxsw Spectrum driver offloads only either the RT_TABLE_MAIN FIB table or the VRF tables, so the RT_TABLE_LOCAL table is squashed to the RT_TABLE_MAIN table to allow local routes to be offloaded too. By default, multicast MFC routes which are not assigned to any user requested table are put in the RT_TABLE_DEFAULT table. Due to the fact that offloading multicast MFC routes support in Spectrum router logic is going to be introduced soon, squash the default table to MAIN too. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27mlxsw: spectrum: Add the multicast routing hardware logicYotam Gigi
Implement the multicast routing hardware API introduced in previous patch for the specific spectrum hardware. The spectrum hardware multicast routes are written using the RMFT2 register and point to an ACL flexible action set. The actions used for multicast routes are: - Counter action, which allows counting bytes and packets on multicast routes. - Multicast route action, which provide RPF check and do the actual packet duplication to a list of RIFs. - Trap action, in the case the route action specified by the called is trap. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-27mlxsw: spectrum: Add the multicast routing offloading logicYotam Gigi
Add the multicast router offloading logic, which is in charge of handling the VIF and MFC notifications and translating it to the hardware logic API. The offloading logic has to overcome several obstacles in order to safely comply with the kernel multicast router user API: - It must keep track of the mapping between VIFs to netdevices. The user can add an MFC cache entry pointing to a VIF, delete the VIF and add re-add it with a different netdevice. The offloading logic has to handle this in order to be compatible with the kernel logic. - It must keep track of the mapping between netdevices to spectrum RIFs, as the current hardware implementation assume having a RIF for every port in a multicast router. - It must handle routes pointing to pimreg device to be trapped to the kernel, as the packet should be delivered to userspace. - It must handle routes pointing tunnel VIFs. The current implementation does not support multicast forwarding to tunnels, thus routes that point to a tunnel should be trapped to the kernel. - It must be aware of proxy multicast routes, which include both (*,*) routes and duplicate routes. Currently proxy routes are not offloaded and trigger the abort mechanism: removal of all routes from hardware and triggering the traffic to go through the kernel. The multicast routing offloading logic also updates the counters of the offloaded MFC routes in a periodic work. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26nfp: flower vxlan neighbour keep-aliveJohn Hurley
Periodically receive messages containing the destination IPs of tunnels that have recently forwarded traffic. Update the neighbour entries 'used' value for these IPs next hop. This prevents the neighbour entry from expiring on timeout but rather signals an ARP to verify the connection. From an NFP perspective, packets will not fall back mid-flow unless the link is verified to be down. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26nfp: flower vxlan neighbour offloadJohn Hurley
Receive a request when the NFP does not know the next hop for a packet that is to be encapsulated in a VXLAN tunnel. Do a route lookup, determine the next hop entry and update neighbour table on NFP. Monitor the kernel neighbour table for link changes and update NFP with relevant information. Overwrite routes with zero values on the NFP when they expire. Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26nfp: offload vxlan IPv4 endpoints of flower rulesJohn Hurley
Maintain a list of IPv4 addresses used as the tunnel destination IP match fields in currently active flower rules. Offload the entire list of NFP_FL_IPV4_ADDRS_MAX (even if some are unused) when new IPs are added or removed. The NFP should only be aware of tunnel end points that are currently used by rules on the device Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26nfp: offload flower vxlan endpoint MAC addressesJohn Hurley
Generate a list of MAC addresses of netdevs that could be used as VXLAN tunnel end points. Give offloaded MACs an index for storage on the NFP in the ranges: 0x100-0x1ff physical port representors 0x200-0x2ff VF port representors 0x300-0x3ff other offloads (e.g. vxlan netdevs, ovs bridges) Assign phys and vf indexes based on unique 8 bit values in the port num. Maintain list of other netdevs to ensure same netdev is not offloaded twice and each gets a unique ID without exhausting the entries. Because the IDs are unique but constant for a netdev, any changes are implemented by overwriting the index on NFP. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26nfp: compile flower vxlan tunnel set actionsJohn Hurley
Compile set tunnel actions for tc flower. Only support VXLAN and ensure a tunnel destination port of 4789 is used. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26nfp: compile flower vxlan tunnel metadata match fieldsJohn Hurley
Compile ovs-tc flower vxlan metadata match fields for offloading. Only support offload of tunnel data when the VXLAN port specifically matches well known port 4789. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26nfp: add helper to get flower cmsg lengthJohn Hurley
Add a helper function that returns the length of the cmsg data when given the cmsg skb Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26mlxsw: spectrum_flower: Offload "ok" termination actionJiri Pirko
If action is "gact_ok", offload it to HW. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26mlxsw: spectrum_acl: Propagate errors from mlxsw_afa_block_jump/continueJiri Pirko
Propagate error instead of doing WARN_ON right away. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-17 00:36:03 +0000