summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-11-11net: ethernet: bgmac: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1397972 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11ibmvnic: Add vnic client data to login bufferNathan Fontenot
Update the login buffer to include client data for the vnic driver, this includes the OS name, LPAR name, and device name. This update allows this information to be available in the VIOS. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: macb: add of_node_put to error pathsMichael Grzeschik
We add the call of_node_put(bp->phy_node) to all associated error paths for memory clean up. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: macb: add of_phy_deregister_fixed_link to error pathsMichael Grzeschik
We add the call of_phy_deregister_fixed_link to all associated error paths for memory clean up. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: mvpp2: fix GOP statistics loop start and stop conditionsMiquel Raynal
GOP statistics from all ports of one instance of the driver are gathered with one work recalled in loop in a workqueue. The loop is started when a port is up, and stopped when a port is down. This last condition is obviously wrong. Fix this by having a work per port. This way, starting and stoping it when the port is up or down will be fine, while minimizing unnecessary CPU usage. Fixes: 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics") Reported-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: hns3: cleanup mac auto-negotiation state query in hclge_update_speed_duplexFuyun Liang
When checking whether auto-negotiation is on, driver only needs to check the value of mac.autoneg(SW) directly, and does not need to query it from hardware. Because this value is always synchronized with the auto-negotiation state of hardware. This patch removes mac auto-negotiation state query in hclge_update_speed_duplex(). Fixes: 46a3df9f9718 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support) Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: hns3: fix a bug when getting phy address from NCL_config fileFuyun Liang
Driver gets phy address from NCL_config file and uses the phy address to initialize phydev. There are 5 bits for phy address. And C22 phy address has 5 bits. So 0-31 are all valid address for phy. If there is no phy, it will crash. Because driver always get a valid phy address. This patch fixes the phy address to 8 bits, and use 0xff to indicate invalid phy address. Fixes: 46a3df9f9718 (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support) Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11brcmfmac: add CLM download supportChung-Hsien Hsu
The firmware for brcmfmac devices includes information regarding regulatory constraints. For certain devices this information is kept separately in a binary form that needs to be downloaded to the device. This patch adds support to download this so-called CLM blob file. It uses the same naming scheme as the other firmware files with extension of .clm_blob. The CLM blob file is optional. If the file does not exist, the download process will be bypassed. It will not affect the driver loading. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10can: ifi: Fix transmitter delay calculationMarek Vasut
The CANFD transmitter delay calculation formula was updated in the latest software drop from IFI and improves the behavior of the IFI CANFD core during bitrate switching. Use the new formula to improve stability of the CANFD operation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Markus Marb <markus@marb.org> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10can: peak: Add support for new PCIe/M2 CAN FD interfacesStephane Grosjean
This adds support for the following PEAK-System CAN FD interfaces: PCAN-cPCIe FD CAN FD Interface for cPCI Serial (2 or 4 channels) PCAN-PCIe/104-Express CAN FD Interface for PCIe/104-Express (1, 2 or 4 ch.) PCAN-miniPCIe FD CAN FD Interface for PCIe Mini (1, 2 or 4 channels) PCAN-PCIe FD OEM CAN FD Interface for PCIe OEM version (1, 2 or 4 ch.) PCAN-M.2 CAN FD Interface for M.2 (1 or 2 channels) Like the PCAN-PCIe FD interface, all of these boards run the same IP Core that is able to handle CAN FD (see also http://www.peak-system.com). Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10can: sun4i: handle overrun in RX FIFOGerhard Bertelsmann
SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10can: c_can: don't indicate triple sampling support for D_CANRichard Schütz
The D_CAN controller doesn't provide a triple sampling mode, so don't set the CAN_CTRLMODE_3_SAMPLES flag in ctrlmode_supported. Currently enabling triple sampling is a no-op. Signed-off-by: Richard Schütz <rschuetz@uni-koblenz.de> Cc: linux-stable <stable@vger.kernel.org> # >= v3.6 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEsEugenia Emantayev
This is to prevent the case of working with a single MPWQE (1 WQE is always reserved as RQ is linked-list). When the WQE is fully consumed, HW should still have available buffer in order not to drop packets. Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5e: Set page to null in case dma mapping failsInbar Karmy
Currently, when dma mapping fails, put_page is called, but the page is not set to null. Later, in the page_reuse treatment in mlx5e_free_rx_descs(), mlx5e_page_release() is called for the second time, improperly doing dma_unmap (for a non-mapped address) and an extra put_page. Prevent this by nullifying the page pointer when dma_map fails. Fixes: accd58833237 ("net/mlx5e: Introduce RX Page-Reuse") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5e: Fix napi poll with zero budgetSaeed Mahameed
napi->poll can be called with budget 0, e.g. in netpoll scenarios where the caller only wants to poll TX rings (poll_one_napi@net/core/netpoll.c). The below commit changed RX polling from "while" loop to "do {} while", which caused to ignore the initial budget and handle at least one RX packet. This fixes the following warning: [ 2852.049194] mlx5e_napi_poll+0x0/0x260 [mlx5_core] exceeded budget in poll [ 2852.049195] ------------[ cut here ]------------ [ 2852.049195] WARNING: CPU: 0 PID: 25691 at net/core/netpoll.c:171 netpoll_poll_dev+0x18a/0x1a0 Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Martin KaFai Lau <kafai@fb.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5: Cancel health poll before sending panic teardown commandHuy Nguyen
After the panic teardown firmware command, health_care detects the error in PCI bus and calls the mlx5_pci_err_detected. This health_care flow is no longer needed because the panic teardown firmware command will bring down the PCI bus communication with the HCA. The solution is to cancel the health care timer and its pending workqueue request before sending panic teardown firmware command. Kernel trace: mlx5_core 0033:01:00.0: Shutdown was called mlx5_core 0033:01:00.0: health_care:154:(pid 9304): handling bad device here mlx5_core 0033:01:00.0: mlx5_handle_bad_state:114:(pid 9304): NIC state 1 mlx5_core 0033:01:00.0: mlx5_pci_err_detected was called mlx5_core 0033:01:00.0: mlx5_enter_error_state:96:(pid 9304): start mlx5_3:mlx5_ib_event:3061:(pid 9304): warning: event on port 0 mlx5_core 0033:01:00.0: mlx5_enter_error_state:104:(pid 9304): end Unable to handle kernel paging request for data at address 0x0000003f Faulting instruction address: 0xc0080000434b8c80 Fixes: 8812c24d28f4 ('net/mlx5: Add fast unload support in shutdown flow') Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10net/mlx5: Loop over temp list to release delay eventsHuy Nguyen
list_splice_init initializing waiting_events_list after splicing it to temp list, therefore we should loop over temp list to fire the events. Fixes: 4ca637a20a52 ("net/mlx5: Delay events till mlx5 interface's add complete for pci resume") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-10nfp flower action: Modified to use VLAN helper functionsManish Kurup
Modified netronome nfp flower action to use VLAN helper functions instead of accessing/referencing TC act_vlan private structures directly. Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: Manish Kurup <manish.kurup@verizon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10sfc: don't warn on successful change of MACRobert Stonehouse
Fixes: 535a61777f44e ("sfc: suppress handled MCDI failures when changing the MAC address") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: vxge: remove redundant assignments and pointersColin Ian King
There are several pointers that are being assigned but never read so remove these as they are redundant. Also remove an assignment to function_mode that is never read. Cleans up several clang warnings: vxge-main.c:1139:2: warning: Value stored to 'hldev' is never read vxge-main.c:1294:2: warning: Value stored to 'hldev' is never read vxge-main.c:2188:2: warning: Value stored to 'dev' is never read vxge-main.c:2188:2: warning: Value stored to 'dev' is never read vxge-main.c:2723:2: warning: Value stored to 'function_mode' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10Merge tag 'mlx5-updates-2017-11-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2017-11-09 This series introduces vlan offloads related improvements for mlx5 ethernet netdev driver, from Gal Pressman. - Add support for 802.1ad vlan filter - Add support for 802.1ad vlan insertion - Add vlan offloads statistics to ethtool (inserted/stripped vlans) - CHECKSUM_COMPLETE support for vlan traffic when vlan stripping is off! (Finally) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10rsi: rsi_91x_ps: remove redundant code in str_psstateGustavo A. R. Silva
"INVALID_STATE" is already being returned in the default case and this code cannot be reached. Addresses-Coverity-ID: 1398384 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10rt2x00: use monotonic timestamps for frame dumpArnd Bergmann
rt2x00 uses the deprecated do_gettimeofday() function to get a timestamp for its debugfs "dump" file interface. The timestamp is using an unsigned 32-bit value, so we could make it work until 2106 by using ktime_get_real_ts64(), but it seems better to use monotonic times, as we normally want for timestamps. Since this is an interface change, I'm incrementing the DUMP_HEADER_VERSION number, so user space can figure out whether the timestamps are monotonic or not. Most likely the tools won't care either way. Generally speaking, ABI version numbers and in particular changing them is a bad idea. However since this is in debugfs, we don't put any API stability rules on the interface according to Documentation/filesystems/debugfs.txt, and we can take the easy way out here; anyone using the frame dump feature can probably work out the differences here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10rt2x00usb: mark device removed when get ENOENT usb errorStanislaw Gruszka
ENOENT usb error mean "specified interface or endpoint does not exist or is not enabled". Mark device not present when we encounter this error similar like we do with ENODEV error. Otherwise we can have infinite loop in rt2x00usb_work_rxdone(), because we remove and put again RX entries to the queue infinitely. We can have similar situation when submit urb will fail all the time with other error, so we need consider to limit number of entries processed by rxdone work. But for now, since the patch fixes reproducible soft lockup issue on single processor systems and taken ENOENT error meaning, let apply this fix. Patch adds additional ENOENT check not only in rx kick routine, but also on other places where we check for ENODEV error. Reported-by: Richard Genoud <richard.genoud@gmail.com> Debugged-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: pass all CONNECT cmd params to wireless card for processingIgor Mitsyanko
Specifically, following parameters are needed for wireless device configuration but were not available to it before: - HT/VHT capabilities and capabilities masks. - full channel info (not just IEEE number) - BSSID hint - previous BSSID for reassoc request Move Management Frame Protection setting from common encr info structure into STA-specific .connect command parameters. Make sure that all new qlink structure definitions are alignment-safe. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: include HTCAP and VHTCAP into config AP commandIgor Mitsyanko
Include HT/VHT caps directly into command so that they won't have to be searched for in IEs. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: configure and start AP interface with a single commandIgor Mitsyanko
Current logic artificially divides "start AP" procedure into three stages: - generic interface configuration (security, channel etc) - IE's processing - enable AP mode on interface This separation would not allow to do a proper device configuration as first stage needs to use information from IEs that are processed on a second stage. Which means first and second stages have to be meged. In that case there is no point anymore to keep third stage either, so merge all three into a single command. This new command carries all the same info as contained in "struct cfg80211_ap_settings". Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: convert "Append IEs" command to QTN_TLV_ID_IE_SET usageIgor Mitsyanko
Data contained within "Append IEs" command (QLINK_CMD_MGMT_SET_APPIE) duplicates QTN_TLV_ID_IE_SET TLV. Convert the command to use that TLV instead. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: SCAN results: retreive frame type information from "IE set" TLVIgor Mitsyanko
"IE set" TLV carries the same information as qlink_event_scan_result::frame_type. Convert the event to make use of TLV and drop frame_type member. While at it, make qlink_event_scan_result structure alignement-safe. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: extend "IE set" TLV to include frame type infoIgor Mitsyanko
Specifying frame type for "IE set" TLV will allow to use several TLVs in a single message. Modify users accordingly. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: get rid of PHYMODE capabilities flagsIgor Mitsyanko
Supported WiFi operation modes are now identified per-band based on HT/VHT capabilities of each band. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: initialize HT/VHT caps "can override" masksIgor Mitsyanko
Information on which HT/VHT capabilities can be overridden is reported per-MAC by wireless device. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10qtnfmac: use per-band HT/VHT info from wireless deviceIgor Mitsyanko
HT/VHT capabilities must be reported per each band supported by a radio, not for all bands on a radio. Furthermore, driver better not assume any capabilities and just use whetever is reported by device itself. To support this, convert "get channels" command into "get band info" command. Difference is that it may also carry HT/VHT capabilities along with channels information. While at it, also add "num_bitrates" field to "get band info" command, for future use. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: move configuration of probe request IEsArend Van Spriel
The configuration of the IEs for probe requests was done in a P2P related function, which is not very obvious. Moving it to .scan callback function, ie. brcmf_cfg80211_scan(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: get rid of struct brcmf_cfg80211_info::active_scan fieldArend Van Spriel
The field struct brcmf_cfg80211_info::active_scan is set to true upon initializing the driver instance, but it is never changed so simply get rid of it. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: get rid of brcmf_cfg80211_escan() functionArend Van Spriel
The function brcmf_cfg80211_escan() is only called by brcmf_cfg80211_scan() so there is no reason to split in two function especially since the latter does not do an awful lot. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: use msecs_to_jiffies() instead of calculation using HZArend Van Spriel
Minor cleanup using provided macro to convert milliseconds interval to jiffies in brcmf_cfg80211_escan(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: cleanup brcmf_cfg80211_escan() functionArend Van Spriel
The function brcmf_cfg80211_escan() was always called with a non-null request parameter and null pointer for this_ssid parameter. Clean up the function removing the dead code path. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: disable packet filtering in promiscuous modeFranky Lin
Disable arp and nd offload to allow all packets sending to host. Reported-by: Phil Elwell <phil@raspberrypi.org> Tested-by: Phil Elwell <phil@raspberrypi.org> Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10brcmfmac: handle FWHALT mailbox indicationArend Van Spriel
The firmware uses a mailbox to communicate to the host what is going on. In the driver we validate the bit received. Various people seen the following message: brcmfmac: brcmf_sdio_hostmail: Unknown mailbox data content: 0x40012 Bit 4 is cause of this message, but this actually indicates the firmware has halted. Handle this bit by giving a more meaningful error message. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Simple cases of overlapping changes in the packet scheduler. Must easier to resolve this time. Which probably means that I screwed it up somehow. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net/mlx5e: CHECKSUM_COMPLETE offload for VLAN/QinQ packetsGal Pressman
When the VLAN tag is present in the packet buffer (i.e VLAN stripping disabled, QinQ) the driver will currently report CHECKSUM_UNNECESSARY. Instead of using CHECKSUM_COMPLETE offload for packets with first ethertype of IPv4/6, use it for packets with last ethertype of IPv4/6 to cover the former cases as well. The checksum field present in the CQE is calculated from the IP header until the end of the packet. When the first ethertype is different than IPv4/6 (for ex. 802.1Q VLAN) a checksum of the VLAN header/s should be added. The small header/s checksum calculation will allow us to use CHECKSUM_COMPLETE instead of CHECKSUM_UNNECESSARY. Testing bandwidth of one and 8 TCP streams to a single RQ, LRO and VLAN stripping offloads disabled: CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz NIC: Mellanox Technologies MT27710 Family [ConnectX-4 Lx] Before: +--------------+--------------------+---------------------+----------------------+ | Traffic type | 1 Stream BW [Mbps] | 8 Streams BW [Mbps] | Checksum offload | +--------------+--------------------+---------------------+----------------------+ | Untagged | 28,247.35 | 24,716.88 | CHECKSUM_COMPLETE | | VLAN | 27,516.69 | 23,752.26 | CHECKSUM_UNNECESSARY | | QinQ | 6,961.30 | 20,667.04 | CHECKSUM_UNNECESSARY | +--------------+--------------------+---------------------+----------------------+ Now: +--------------+--------------------+---------------------+-------------------+ | Traffic type | 1 Stream BW [Mbps] | 8 Streams BW [Mbps] | Checksum offload | +--------------+--------------------+---------------------+-------------------+ | Untagged | 28,521.28 | 24,926.32 | CHECKSUM_COMPLETE | | VLAN | 27,389.37 | 23,715.34 | CHECKSUM_COMPLETE | | QinQ | 6,901.77 | 20,845.73 | CHECKSUM_COMPLETE | +--------------+--------------------+---------------------+-------------------+ No performance degradation observed. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-09net/mlx5e: Add VLAN offloads statisticsGal Pressman
The following counters are now exposed through ethtool -S: rx[i]_removed_vlan_packets (per channel) rx_removed_vlan_packets tx[i]_added_vlan_packets (per channel) tx_added_vlan_packets rx_removed_vlan_packets: The number of packets that had their outer VLAN header stripped to the CQE by the hardware. tx_added_vlan_packets: The number of packets that had their outer VLAN header inserted by the hardware. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-09net/mlx5e: Add 802.1ad VLAN insertion supportGal Pressman
Report VLAN insertion support for S-tagged packets and add support by choosing the correct VLAN type in the WQE. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-09net/mlx5e: Add 802.1ad VLAN filter steering rulesGal Pressman
When a user chooses to use 802.1ad VLAN the proper steering rules will be added to the VLAN flow table (matching the specific S-tag VID). Due to current hardware limitation, when using 802.1ad, we must disable C-tag VLAN stripping on the RQs. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-09net/mlx5e: Declare bitmap using kernel macroGal Pressman
Replace explicit declaration of bitmap with DECLARE_BITMAP kernel macro. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-09net/mlx5e: Add rollback on add VLAN failureGal Pressman
When add VLAN rule fails the active vlan bit should be cleared. Fixes: afb736e9330a ("net/mlx5: Ethernet resource handling files") Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-09net/mlx5e: Rename VLAN related variables and functionsGal Pressman
Rename VLAN related symbols to better reflect the fact that they are associated to C-tag VLAN. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-11-09net: usb: asix: fill null-ptr-deref in asix_suspendAndrey Konovalov
When asix_suspend() is called dev->driver_priv might not have been assigned a value, so we need to check that it's not NULL. Similar issue is present in asix_resume(), this patch fixes it as well. Found by syzkaller. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Modules linked in: CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.14.0-rc4-43422-geccacdd69a8c #400 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bb36300 task.stack: ffff88006bba8000 RIP: 0010:asix_suspend+0x76/0xc0 drivers/net/usb/asix_devices.c:629 RSP: 0018:ffff88006bbae718 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff880061ba3b80 RCX: 1ffff1000c34d644 RDX: 0000000000000001 RSI: 0000000000000402 RDI: 0000000000000008 RBP: ffff88006bbae738 R08: 1ffff1000d775cad R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800630a8b40 R13: 0000000000000000 R14: 0000000000000402 R15: ffff880061ba3b80 FS: 0000000000000000(0000) GS:ffff88006c600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff33cf89000 CR3: 0000000061c0a000 CR4: 00000000000006f0 Call Trace: usb_suspend_interface drivers/usb/core/driver.c:1209 usb_suspend_both+0x27f/0x7e0 drivers/usb/core/driver.c:1314 usb_runtime_suspend+0x41/0x120 drivers/usb/core/driver.c:1852 __rpm_callback+0x339/0xb60 drivers/base/power/runtime.c:334 rpm_callback+0x106/0x220 drivers/base/power/runtime.c:461 rpm_suspend+0x465/0x1980 drivers/base/power/runtime.c:596 __pm_runtime_suspend+0x11e/0x230 drivers/base/power/runtime.c:1009 pm_runtime_put_sync_autosuspend ./include/linux/pm_runtime.h:251 usb_new_device+0xa37/0x1020 drivers/usb/core/hub.c:2487 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: 8d 7c 24 20 48 89 fa 48 c1 ea 03 80 3c 02 00 75 5b 48 b8 00 00 00 00 00 fc ff df 4d 8b 6c 24 20 49 8d 7d 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 34 4d 8b 6d 08 4d 85 ed 74 0b e8 26 2b 51 fd 4c RIP: asix_suspend+0x76/0xc0 RSP: ffff88006bbae718 ---[ end trace dfc4f5649284342c ]--- Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09Revert "net: usb: asix: fill null-ptr-deref in asix_suspend"David S. Miller
This reverts commit baedf68a068ca29624f241426843635920f16e1d. There is an updated version of this fix which covers the problem more thoroughly. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 20:40:13 +0000