| Age | Commit message (Collapse) | Author |
|---|
|
The WoL feature should be disabled when config_init is called and the
feature should turned on or off when set_wol is called.
In addition updated the calls to modify the registers to use the set_bit
and clear_bit function calls.
Fixes: 6d749428788b ("net: phy: DP83TC811: Introduce support for the
DP83TC811 phy")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The WoL feature should be disabled when config_init is called and the
feature should turned on or off when set_wol is called.
In addition updated the calls to modify the registers to use the set_bit
and clear_bit function calls.
Fixes: 3b427751a9d0 ("net: phy: DP83822 initial driver submission")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Under heavy load, the EOTID termination FLOWC request fails to get
enqueued to the end of the Tx ring due to lack of credits. This
results in EOTID leak.
When disabling TC-MQPRIO offload, the link is already brought down
to cleanup EOTIDs. So, flush any pending enqueued skbs that can't be
sent outside the wire, to make room for FLOWC request. Also, move the
FLOWC descriptor consumption logic closer to when the FLOWC request is
actually posted to hardware.
Fixes: 0e395b3cb1fb ("cxgb4: add FLOWC based QoS offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unfortunately sometimes ->probe() may fail. The commit b9663b7ca6ff
("net: stmmac: Enable SERDES power up/down sequence")
messed up with error handling and thus:
[ 12.811311] ------------[ cut here ]------------
[ 12.811993] kernel BUG at net/core/dev.c:9937!
Fix this by properly crafted error path.
Fixes: b9663b7ca6ff ("net: stmmac: Enable SERDES power up/down sequence")
Cc: Voon Weifeng <weifeng.voon@intel.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vregion helpers to get min and max priority depend on the correct
ordering of vchunks in the vregion list. However, the current code
always adds new chunk to the end of the list, no matter what the
priority is. Fix this by finding the correct place in the list and put
vchunk there.
Fixes: 22a677661f56 ("mlxsw: spectrum: Introduce ACL core with simple TCAM implementation")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit e6a41c23df0d, while trying to fix an issue,
("net: macb: ensure interface is not suspended on at91rm9200")
introduced a refcounting regression, because in error case refcounter
must be balanced. Fix it by calling pm_runtime_put_noidle() in error case.
While here, fix the same mistake in other couple of places.
Fixes: e6a41c23df0d ("net: macb: ensure interface is not suspended on at91rm9200")
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Should an irq requested with 'devm_request_irq' be released explicitly,
it should be done by 'devm_free_irq()', not 'free_irq()'.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MACsec decryption always occurs in a softirq context. Since
the FPU may not be usable in the softirq context, the call to
decrypt may be scheduled on the cryptd work queue. The cryptd
work queue does not provide ordering guarantees. Therefore,
preserving order requires masking out ASYNC implementations
of gcm(aes).
For instance, an Intel CPU with AES-NI makes available the
generic-gcm-aesni driver from the aesni_intel module to
implement gcm(aes). However, this implementation requires
the FPU, so it is not always available to use from a softirq
context, and will fallback to the cryptd work queue, which
does not preserve frame ordering. With this change, such a
system would select gcm_base(ctr(aes-aesni),ghash-generic).
While the aes-aesni implementation prefers to use the FPU, it
will fallback to the aes-asm implementation if unavailable.
By using a synchronous version of gcm(aes), the decryption
will complete before returning from crypto_aead_decrypt().
Therefore, the macsec_decrypt_done() callback will be called
before returning from macsec_decrypt(). Thus, the order of
calls to macsec_post_decrypt() for the frames is preserved.
While it's presumable that the pure AES-NI version of gcm(aes)
is more performant, the hybrid solution is capable of gigabit
speeds on modest hardware. Regardless, preserving the order
of frames is paramount for many network protocols (e.g.,
triggering TCP retries). Within the MACsec driver itself, the
replay protection is tripped by the out-of-order frames, and
can cause frames to be dropped.
This bug has been present in this code since it was added in
v4.6, however it may not have been noticed since not all CPUs
have FPU offload available. Additionally, the bug manifests
as occasional out-of-order packets that are easily
misattributed to other network phenomena.
When this code was added in v4.6, the crypto/gcm.c code did
not restrict selection of the ghash function based on the
ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would
select the ghash-clmulni driver instead of ghash-generic,
which submits to the cryptd work queue if the FPU is busy.
However, this bug was was corrected in v4.8 by commit
b30bdfa86431afbafe15284a3ad5ac19b49b88e3, and was backported
all the way back to the v3.14 stable branch, so this patch
should be applicable back to the v4.6 stable branch.
Signed-off-by: Scott Dial <scott@scottdial.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Zero the result code stored in a field of the scratch 0 register
before issuing a generic EE command. This just guarantees that
the value we read later was actually written as a result of the
command.
Also add the definitions of two more possible result codes that can
be returned when issuing flow control enable or disable commands:
INCORRECT_CHANNEL_STATE: - channel must be in started state
INCORRECT_DIRECTION - flow control is only valid for TX channels
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An error message about limiting the number of TREs used prints the
wrong value. Fix this bug.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ipa_endpoint_stop(), for TX endpoints we set the number of retries
to 0. When we break out of the loop, retries being 0 means we return
EIO rather than the value of ret (which should be 0).
Fix this by using a non-zero retry count for both RX and TX
channels, and just break out of the loop after calling
gsi_channel_stop() for TX channels. This way only RX channels
will retry, and the retry count will be non-zero at the end
for TX channels (so the proper value gets returned).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Doing a device reset addresses an obscure FW timing issue in
the FW upgrade process.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure we can report the new FW version after a
fw-upgrade has finished by re-reading the device's
fw version information.
Fixes: c672412f6172 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't bother with the link check during probe, let
the watchdog notice the first link-up. This allows
probe to finish cleanly without any interruptions
from over excited user programs opening the device
as soon as it is registered.
Fixes: c672412f6172 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In this code, it appears that phyter_clocks is a list head, based on
the previous list_for_each, and that clock->list is intended to be a
list element, given that it has just been initialized in
dp83640_clock_init. Accordingly, switch the arguments to
list_add_tail, which takes the list head as the second argument.
Fixes: cb646e2b02b27 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During MTU change, the following events may happen.
Client-driven CRQ initialization fails due to partner’s CRQ closed,
causing client to enqueue a reset task for FATAL_ERROR. Then passive
(server-driven) CRQ initialization succeeds, causing client to
release CRQ and enqueue a reset task for failover. If the passive
CRQ initialization occurs before the FATAL reset task is processed,
the FATAL error reset task would try to access a CRQ message queue
that was freed, causing an oops. The problem may be most likely to
occur during DLPAR add vNIC with a non-default MTU, because the DLPAR
process will automatically issue a change MTU request.
Fix this by not processing fatal error reset if CRQ is passively
initialized after client-driven CRQ initialization fails.
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Need to allocate the q counters before init_rx which needs them
when creating the rq.
Fixes: 8520fa57a4e9 ("net/mlx5e: Create q counters on uplink representors")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Processing commands by cmd_work_handler() while already in Internal
Error State will result in entry leak, since the handler process force
completion without doorbell. Forced completion doesn't release the entry
and event completion will never arrive, so entry should be released.
Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
mlx5_cmd_flush() will trigger forced completions to all valid command
entries. Triggered by an asynch event such as fast teardown it can
happen at any stage of the command, including command initialization.
It will trigger forced completion and that can lead to completion on an
uninitialized command entry.
Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is
initialized will ensure force completion is treated only if command
entry is initialized.
Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In polling mode, set arm_db member to a value that will avoid CQ
event recovery by the HW.
Otherwise we might get event without completion function.
In addition,empty completion function to was added to protect from
unexpected events.
Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In cited patch mutex is initialized after its used.
Below call trace is observed.
Fix the order to initialize the mutex early enough.
Similarly follow mirror sequence during cleanup.
kernel: DEBUG_LOCKS_WARN_ON(lock->magic != lock)
kernel: WARNING: CPU: 5 PID: 45916 at kernel/locking/mutex.c:938
__mutex_lock+0x7d6/0x8a0
kernel: Call Trace:
kernel: ? esw_vport_tbl_get+0x3b/0x250 [mlx5_core]
kernel: ? mark_held_locks+0x55/0x70
kernel: ? __slab_free+0x274/0x400
kernel: ? lockdep_hardirqs_on+0x140/0x1d0
kernel: esw_vport_tbl_get+0x3b/0x250 [mlx5_core]
kernel: ? mlx5_esw_chains_create_fdb_prio+0xa57/0xc20 [mlx5_core]
kernel: mlx5_esw_vport_tbl_get+0x88/0xf0 [mlx5_core]
kernel: mlx5_esw_chains_create+0x2f3/0x3e0 [mlx5_core]
kernel: esw_create_offloads_fdb_tables+0x11d/0x580 [mlx5_core]
kernel: esw_offloads_enable+0x26d/0x540 [mlx5_core]
kernel: mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core]
kernel: mlx5_devlink_eswitch_mode_set+0x1af/0x320 [mlx5_core]
kernel: devlink_nl_cmd_eswitch_set_doit+0x41/0xb0
Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When mlx5_modify_header_alloc() fails, instead of printing the error
value returned, current error log prints 0.
Fix by printing correct error value returned by
mlx5_modify_header_alloc().
Fixes: 6724e66b90ee ("net/mlx5: E-Switch, Get reg_c1 value on miss")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Error unwinding is done incorrectly in the cited commit.
When steering init fails, there is no need to perform steering cleanup.
When vport error exists, error cleanup should be mirror of the setup
routine, i.e. to perform steering cleanup before metadata cleanup.
This avoids the call trace in accessing uninitialized objects which are
skipped during steering_init() due to failure in steering_init().
Call trace:
mlx5_cmd_modify_header_alloc:805:(pid 21128): too many modify header
actions 1, max supported 0
E-Switch: Failed to create restore mod header
BUG: kernel NULL pointer dereference, address: 00000000000000d0
[ 677.263079] mlx5_destroy_flow_group+0x13/0x80 [mlx5_core]
[ 677.268921] esw_offloads_steering_cleanup+0x51/0xf0 [mlx5_core]
[ 677.275281] esw_offloads_enable+0x1a5/0x800 [mlx5_core]
[ 677.280949] mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core]
[ 677.287227] mlx5_devlink_eswitch_mode_set+0x1af/0x320
[ 677.293741] devlink_nl_cmd_eswitch_set_doit+0x41/0xb0
[ 677.299217] genl_rcv_msg+0x1eb/0x430
Fixes: 7983a675ba65 ("net/mlx5: E-Switch, Enable chains only if regs loopback is enabled")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
WireGuard currently only propagates ECN markings on tunnel decap according
to the old RFC3168 specification. However, the spec has since been updated
in RFC6040 to recommend slightly different decapsulation semantics. This
was implemented in the kernel as a set of common helpers for ECN
decapsulation, so let's just switch over WireGuard to using those, so it
can benefit from this enhancement and any future tweaks. We do not drop
packets with invalid ECN marking combinations, because WireGuard is
frequently used to work around broken ISPs, which could be doing that.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Reported-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com>
Cc: Dave Taht <dave.taht@gmail.com>
Cc: Rodney W. Grimes <ietf@gndrsh.dnsmgr.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior, if the alloc_percpu of packet_percpu_multicore_worker_alloc
failed, the previously allocated ptr_ring wouldn't be freed. This commit
adds the missing call to ptr_ring_cleanup in the error case.
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit removes a useless newline at the end of a scope, which
doesn't add anything in the way of organization or readability.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These struct members named 'phylink_validate' was assigned twice:
static const struct mv88e6xxx_ops mv88e6190_ops = {
......
.phylink_validate = mv88e6390_phylink_validate,
......
.phylink_validate = mv88e6390_phylink_validate,
};
static const struct mv88e6xxx_ops mv88e6190x_ops = {
......
.phylink_validate = mv88e6390_phylink_validate,
......
.phylink_validate = mv88e6390x_phylink_validate,
};
static const struct mv88e6xxx_ops mv88e6191_ops = {
......
.phylink_validate = mv88e6390_phylink_validate,
......
.phylink_validate = mv88e6390_phylink_validate,
};
static const struct mv88e6xxx_ops mv88e6290_ops = {
......
.phylink_validate = mv88e6390_phylink_validate,
......
.phylink_validate = mv88e6390_phylink_validate,
};
Remove all the first one and leave the second one which are been used in
fact. Be aware that for 'mv88e6190x_ops' the assignment functions is
different while the others are all the same. This fixes the following
coccicheck warning:
drivers/net/dsa/mv88e6xxx/chip.c:3911:48-49: phylink_validate: first
occurrence line 3965, second occurrence line 3967
drivers/net/dsa/mv88e6xxx/chip.c:3970:49-50: phylink_validate: first
occurrence line 4024, second occurrence line 4026
drivers/net/dsa/mv88e6xxx/chip.c:4029:48-49: phylink_validate: first
occurrence line 4082, second occurrence line 4085
drivers/net/dsa/mv88e6xxx/chip.c:4184:48-49: phylink_validate: first
occurrence line 4238, second occurrence line 4242
Fixes: 4262c38dc42e ("net: dsa: mv88e6xxx: Add SERDES stats counters to all 6390 family members")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes the following build warning in ena_xdp_set(), which is
observed on aarch64 with 64KB page size.
In file included from ./include/net/inet_sock.h:19,
from ./include/net/ip.h:27,
from drivers/net/ethernet/amazon/ena/ena_netdev.c:46:
drivers/net/ethernet/amazon/ena/ena_netdev.c: In function \
‘ena_xdp_set’: \
drivers/net/ethernet/amazon/ena/ena_netdev.c:557:6: warning: \
format ‘%lu’ \
expects argument of type ‘long unsigned int’, but argument 4 \
has type ‘int’ \
[-Wformat=] "Failed to set xdp program, the current MTU (%d) is \
larger than the maximum allowed MTU (%lu) while xdp is on",
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A call to 'dma_alloc_coherent()' is hidden in 'sonic_alloc_descriptors()',
called from 'sonic_probe1()'.
This is correctly freed in the remove function, but not in the error
handling path of the probe function.
Fix it and add the missing 'dma_free_coherent()' call.
While at it, rename a label in order to be slightly more informative.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and
supported from u32 to link mode") updated ethernet drivers to use a
linkmode bitmap. It mistakenly dropped a bitwise negation in the
tc35815 ethernet driver on a bitmask to set the supported/advertising
flags.
Found by Anthony via code inspection, not tested as I do not have the
required hardware.
Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode")
Signed-off-by: Anthony Felice <tony.felice@timesys.com>
Reviewed-by: Akshay Bhat <akshay.bhat@timesys.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current logic in bnxt_fix_features() will inadvertently turn on both
CTAG and STAG VLAN offload if the user tries to disable both. Fix it
by checking that the user is trying to enable CTAG or STAG before
enabling both. The logic is supposed to enable or disable both CTAG and
STAG together.
Fixes: 5a9f6b238e59 ("bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bnxt_alloc_ctx_pg_tbls() should return error when the memory size of the
context memory to set up is zero. By returning success (0), the caller
may proceed normally and may crash later when it tries to set up the
memory.
Fixes: 08fe9d181606 ("bnxt_en: Add Level 2 context memory paging support.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Improve the slot reset sequence by disabling the device to prevent bad
DMAs if slot reset fails. Return the proper result instead of always
PCI_ERS_RESULT_RECOVERED to the caller.
Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Broadcom adapters support only maximum of 512 CQs per PF. If user sets
MSIx vectors more than supported CQs, firmware is setting incorrect value
for msix_vec_per_pf_max parameter. Fix it by reducing the BNXT_MSIX_VEC_MAX
value to 512, even though the maximum # of MSIx vectors supported by adapter
are 1280.
Fixes: f399e8497826 ("bnxt_en: Use msix_vec_per_pf_max and msix_vec_per_pf_min devlink params.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the logic that sets the enable/disable flag for the source MAC
filter according to firmware spec 1.7.1.
In the original firmware spec. before 1.7.1, the VF spoof check flags
were not latched after making the HWRM_FUNC_CFG call, so there was a
need to keep the func_flags so that subsequent calls would perserve
the VF spoof check setting. A change was made in the 1.7.1 spec
so that the flags became latched. So we now set or clear the anti-
spoof setting directly without retrieving the old settings in the
stored vf->func_flags which are no longer valid. We also remove the
unneeded vf->func_flags.
Fixes: 8eb992e876a8 ("bnxt_en: Update firmware interface spec to 1.7.6.2.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Read the temperature sensor register from the correct location for the
88E2110 PHY. There is no enable/disable bit on 2110, so make
mv3310_hwmon_config() run on 88X3310 only.
Fixes: 62d01535474b61 ("net: phy: marvell10g: add support for the 88x2110 PHY")
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Aquantia AQC100 controller enables a SFP+ port, so the driver should
configure the media type as '_TYPE_FIBRE' instead of '_TYPE_TP'.
Signed-off-by: Richard Clark <richard.xnu.clark@gmail.com>
Cc: Igor Russkikh <irusskikh@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix memory leak in netfilter flowtable, from Roi Dayan.
2) Ref-count leaks in netrom and tipc, from Xiyu Yang.
3) Fix warning when mptcp socket is never accepted before close, from
Florian Westphal.
4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.
5) Fix large delays during PTP synchornization in cxgb4, from Rahul
Lakkireddy.
6) team_mode_get() can hang, from Taehee Yoo.
7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
from Niklas Schnelle.
8) Fix handling of bpf XADD on BTF memory, from Jann Horn.
9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.
10) Missing queue memory release in iwlwifi pcie code, from Johannes
Berg.
11) Fix NULL deref in macvlan device event, from Taehee Yoo.
12) Initialize lan87xx phy correctly, from Yuiko Oshino.
13) Fix looping between VRF and XFRM lookups, from David Ahern.
14) etf packet scheduler assumes all sockets are full sockets, which is
not necessarily true. From Eric Dumazet.
15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.
16) fib_select_default() needs to handle nexthop objects, from David
Ahern.
17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.
18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.
19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.
20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
from Luke Nelson.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
selftests/bpf: Fix a couple of broken test_btf cases
tools/runqslower: Ensure own vmlinux.h is picked up first
bpf: Make bpf_link_fops static
bpftool: Respect the -d option in struct_ops cmd
selftests/bpf: Add test for freplace program with expected_attach_type
bpf: Propagate expected_attach_type when verifying freplace programs
bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
bpf, x86_32: Fix logic error in BPF_LDX zero-extension
bpf, x86_32: Fix clobbering of dst for BPF_JSET
bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
bpf: Fix reStructuredText markup
net: systemport: suppress warnings on failed Rx SKB allocations
net: bcmgenet: suppress warnings on failed Rx SKB allocations
macsec: avoid to set wrong mtu
mac80211: sta_info: Add lockdep condition for RCU list usage
mac80211: populate debugfs only after cfg80211 init
net: bcmgenet: correct per TX/RX ring statistics
net: meth: remove spurious copyright text
net: phy: bcm84881: clear settings on link down
chcr: Fix CPU hard lockup
...
|
|
The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.
However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.
This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.
However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.
This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a macsec interface is created, the mtu is calculated with the lower
interface's mtu value.
If the mtu of lower interface is lower than the length, which is needed
by macsec interface, macsec's mtu value will be overflowed.
So, if the lower interface's mtu is too low, macsec interface's mtu
should be set to 0.
Test commands:
ip link add dummy0 mtu 10 type dummy
ip link add macsec0 link dummy0 type macsec
ip link show macsec0
Before:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274
After:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just three changes:
* fix a wrong GFP_KERNEL in hwsim
* fix the debugfs mess after the mac80211 registration race fix
* suppress false-positive RCU list lockdep warnings
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.7
Second set of fixes for v5.7. Quite a few iwlwifi fixes and some
maintainers file updates.
iwlwifi
* fix a bug with kmemdup() error handling
* fix a DMA pool warning about unfreed memory
* fix beacon statistics
* fix a theoritical bug in device initialisation
* fix queue limit handling and inactive TID removal
* disable ACK Enabled Aggregation which was enabled by accident
* fix transmit power setting reading from BIOS with certain versions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When fixing the initialization race, we neglected to account for
the fact that debugfs is initialized in wiphy_register(), and
some debugfs things went missing (or rather were rerooted to the
global debugfs root).
Fix this by adding debugfs entries only after wiphy_register().
This requires some changes in the rate control code since it
currently adds debugfs at alloc time, which can no longer be
done after the reordering.
Reported-by: Jouni Malinen <j@w1.fi>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Felix Fietkau <nbd@nbd.name>
Cc: stable@vger.kernel.org
Fixes: 52e04b4ce5d0 ("mac80211: fix race in ieee80211_register_hw()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20200423111344.0e00d3346f12.Iadc76a03a55093d94391fc672e996a458702875d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The change to track net_device_stats per ring to better support SMP
missed updating the rx_dropped member.
The ndo_get_stats method is also needed to combine the results for
ethtool statistics (-S) before filling in the ethtool structure.
Fixes: 37a30b435b92 ("net: bcmgenet: Track per TX/RX rings statistics")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Evidently, at some point in the pre-githistorious past,
drivers/net/ethernet/sgi/meth.h somehow contained some code from the
"snull" driver from the Linux Device Drivers book. A comment crediting
that source, asserting copyright ownership by the LDD authors, and imposing
the LDD2 license terms was duly added to the file.
Any code that may have been derived from snull is long gone, and the
distribution terms are not GPL-compatible. Since the copyright claim is
not based in fact (if it ever was), simply remove it and the distribution
terms as well.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: "Fendt, Oliver" <oliver.fendt@siemens.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clear the link partner advertisement, speed, duplex and pause when
the link goes down, as other phylib drivers do. This avoids the
stale link partner, speed and duplex settings being reported via
ethtool.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function ixp4xx_eth_probe() does not perform sufficient error
checking after executing devm_ioremap_resource(), which can result
in crashes if a critical error path is encountered.
Fixes: f458ac479777 ("ARM/net: ixp4xx: Pass ethernet physical base as resource")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the absence of MC1, the size calculation function
cudbg_mem_region_size() was returing wrong MC size and
resulted in adapter crash. This patch adds new argument
to cudbg_mem_region_size() which will have actual size
and returns error to caller in the absence of MC1.
Fixes: a1c69520f785 ("cxgb4: collect MC memory dump")
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>"
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IFLA_GENEVE_* attributes are in the data array, which is correctly
used when fetching the value, but not when setting the extended
ack. Because IFLA_GENEVE_MAX < IFLA_MAX, we avoid out of bounds
array accesses, but we don't provide a pointer to the invalid
attribute to userspace.
Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
