summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-03-20virt_wifi: implement ndo_get_iflinkTaehee Yoo
->ndo_get_iflink() is useful for finding lower interface. Test commands: ip link add dummy0 type dummy ip link add vw1 link dummy0 type virt_wifi ip link show vw1 Before: 9: vw1: <BROADCAST,MULTICAST> ... After: 9: vw1@dummy0: <BROADCAST,MULTICAST> ... Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20200305090636.28221-1-ap420073@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-20mac80211_hwsim: add frame transmission support over virtioErel Geron
This allows communication with external entities. It also required fixing up the netlink policy, since NLA_UNSPEC attributes are no longer accepted. Signed-off-by: Erel Geron <erelx.geron@intel.com> [port to backports, inline the ID, use 29 as the ID as requested, drop != NULL checks, reduce ifdefs] Link: https://lore.kernel.org/r/20200305143212.c6e4c87d225b.I7ce60bf143e863dcdf0fb8040aab7168ba549b99@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-03-19net: dsa: sja1105: Avoid error message for unknown PHY mode on disabled portsVladimir Oltean
When sja1105_init_mii_settings iterates over the port list, it prints this message for disabled ports, because they don't have a valid phy-mode: [ 4.778702] sja1105 spi2.0: Unsupported PHY mode unknown! Suggested-by: Andrew Lunn <andrew@lunn.ch> Suggested-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19cxgb4: fix Txq restart check during backpressureRahul Lakkireddy
Driver reclaims descriptors in much smaller batches, even if hardware indicates more to reclaim, during backpressure. So, fix the check to restart the Txq during backpressure, by looking at how many descriptors hardware had indicated to reclaim, and not on how many descriptors that driver had actually reclaimed. Once the Txq is restarted, driver will reclaim even more descriptors when Tx path is entered again. Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19cxgb4: fix throughput drop during Tx backpressureRahul Lakkireddy
commit 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") reverted back to getting Tx CIDX updates via DMA, instead of interrupts, introduced by commit d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") However, it missed reverting back several code changes where Tx CIDX updates are not explicitly requested during backpressure when using interrupt mode. These missed changes cause slow recovery during backpressure because the corresponding interrupt no longer comes and hence results in Tx throughput drop. So, revert back these missed code changes, as well, which will allow explicitly requesting Tx CIDX updates when backpressure happens. This enables the corresponding interrupt with Tx CIDX update message to get generated and hence speed up recovery and restore back throughput. Fixes: 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: remove atomic64_add from veth_xdp_xmit hotpathLorenzo Bianconi
Remove atomic64_add from veth_xdp_xmit hotpath and rely on xdp_xmit_err/xdp_tx_err counters Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: introduce more xdp countersLorenzo Bianconi
Introduce xdp_xmit counter in order to distinguish between XDP_TX and ndo_xdp_xmit stats. Introduce the following ethtool counters: - rx_xdp_tx - rx_xdp_tx_errors - tx_xdp_xmit - tx_xdp_xmit_errors - rx_xdp_redirect Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: distinguish between rx_drops and xdp_dropsLorenzo Bianconi
Distinguish between rx_drops and xdp_drops since the latter is already reported in rx_packets. Report xdp_drops in ethtool statistics Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: introduce more specialized counters in veth_statsLorenzo Bianconi
Introduce xdp_tx, xdp_redirect and rx_drops counters in veth_stats data structure. Move stats accounting in veth_poll. Remove xdp_xmit variable in veth_xdp_rcv_one/veth_xdp_rcv_skb and rely on veth_stats counters. This is a preliminary patch to align veth xdp statistics to mlx, intel and marvell xdp implementation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19veth: move xdp stats in a dedicated structureLorenzo Bianconi
Move xdp stats in veth_stats data structure. This is a preliminary patch to align xdp statistics to mlx5, ixgbe and mvneta drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: RGMII skew delay configurationAntoine Tenart
This patch adds support for configuring the RGMII skew delays in Rx and Tx. The Rx and Tx skews are set based on the interface mode. By default their configuration is set to the default value in hardware (0.2ns); this means the driver do not rely anymore on the bootloader configuration. Then based on the interface mode being used, a 2ns delay is added: - RGMII_ID adds it for both Rx and Tx. - RGMII_RXID adds it for Rx. - RGMII_TXID adds it for Tx. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add support for RGMII MAC modeAntoine Tenart
This patch adds support for connecting VSC8584 PHYs to the MAC using RGMII. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: dsa: mt7530: Change the LINK bit to reflect the link statusRené van Dorst
Andrew reported: After a number of network port link up/down changes, sometimes the switch port gets stuck in a state where it thinks it is still transmitting packets but the cpu port is not actually transmitting anymore. In this state you will see a message on the console "mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter in ifconfig will be incrementing on virtual port, but not incrementing on cpu port. The issue is that MAC TX/RX status has no impact on the link status or queue manager of the switch. So the queue manager just queues up packets of a disabled port and sends out pause frames when the queue is full. Change the LINK bit to reflect the link status. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reported-by: Andrew Smith <andrew.smith@digi.com> Signed-off-by: René van Dorst <opensource@vdorst.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: spectrum_flower: Offload FLOW_ACTION_PRIORITYPetr Machata
Offload action skbedit priority when keyed to a flower classifier. The skb->priority field in Linux is very generic, so only allow setting the bottom 8 priorities and bounce anything else. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: core: Add QOS_ACTIONPetr Machata
The QOS_ACTION is used for manipulating the QoS attributes of a packet. Add the corresponding defines and helpers, in particular for the switch_priority override. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: stmmac: dwmac_lib: remove unnecessary checks in dwmac_dma_reset()Dejin Zheng
it will check the return value of dwmac_dma_reset() in the stmmac_init_dma_engine() function and report an error if the return value is not zero. so don't need check here. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: phy: mscc: add missing check on a phy_write return valueAntoine Tenart
Commit a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") introduced a call to 'phy_write' storing its return value to a variable called 'ret'. But 'ret' never was checked for a possible error being returned, and hence was not used at all. Fix this by checking the return value and exiting the function if an error was returned. As this does not fix a known bug, this commit is mostly cosmetic and not sent as a fix. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: ipa: Remove unused including <linux/version.h>YueHaibing
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: ipa: fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19liquidio: remove set but not used variable 's'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'octeon_chip_specific_setup': drivers/net/ethernet/cavium/liquidio/lio_main.c:1378:8: warning: variable 's' set but not used [-Wunused-but-set-variable] It's not used since commit b6334be64d6f ("net/liquidio: Delete driver version assignment") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19mlxsw: pci: Only issue reset when system is readyIdo Schimmel
During initialization the driver issues a software reset command and then waits for the system status to change back to "ready" state. However, before issuing the reset command the driver does not check that the system is actually in "ready" state. On Spectrum-{1,2} systems this was always the case as the hardware initialization time is very short. On Spectrum-3 systems this is no longer the case. This results in the software reset command timing-out and the driver failing to load: [ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0) [ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write) [ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device [ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110 Fix this by waiting for the system to become ready both before issuing the reset command and afterwards. In case of failure, print the last system status to aid in debugging. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18Merge tag 'mlx5-updates-2020-03-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-03-17 1) Compiler warnings and cleanup for the connection tracking series 2) Bug fixes for the connection tracking series 3) Fix devlink port register sequence 4) Last five patches in the series, By Eli cohen Add the support for forwarding traffic between two eswitch uplink representors (Hairpin for eswitch), using mlx5 termination tables to change the direction of a packet in hw from RX to TX pipeline. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18wireguard: noise: error out precomputed DH during handshake rather than configJason A. Donenfeld
We precompute the static-static ECDH during configuration time, in order to save an expensive computation later when receiving network packets. However, not all ECDH computations yield a contributory result. Prior, we were just not letting those peers be added to the interface. However, this creates a strange inconsistency, since it was still possible to add other weird points, like a valid public key plus a low-order point, and, like points that result in zeros, a handshake would not complete. In order to make the behavior more uniform and less surprising, simply allow all peers to be added. Then, we'll error out later when doing the crypto if there's an issue. This also adds more separation between the crypto layer and the configuration layer. Discussed-with: Mathias Hall-Andersen <mathias@hall-andersen.dk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18wireguard: receive: remove dead code from default packet type caseJason A. Donenfeld
The situation in which we wind up hitting the default case here indicates a major bug in earlier parsing code. It is not a usual thing that should ever happen, which means a "friendly" message for it doesn't make sense. Rather, replace this with a WARN_ON, just like we do earlier in the file for a similar situation, so that somebody sends us a bug report and we can fix it. Reported-by: Fabian Freyer <fabianfreyer@radicallyopensecurity.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18wireguard: queueing: account for skb->protocol==0Jason A. Donenfeld
We carry out checks to the effect of: if (skb->protocol != wg_examine_packet_protocol(skb)) goto err; By having wg_skb_examine_untrusted_ip_hdr return 0 on failure, this means that the check above still passes in the case where skb->protocol is zero, which is possible to hit with AF_PACKET: struct sockaddr_pkt saddr = { .spkt_device = "wg0" }; unsigned char buffer[5] = { 0 }; sendto(socket(AF_PACKET, SOCK_PACKET, /* skb->protocol = */ 0), buffer, sizeof(buffer), 0, (const struct sockaddr *)&saddr, sizeof(saddr)); Additional checks mean that this isn't actually a problem in the code base, but I could imagine it becoming a problem later if the function is used more liberally. I would prefer to fix this by having wg_examine_packet_protocol return a 32-bit ~0 value on failure, which will never match any value of skb->protocol, which would simply change the generated code from a mov to a movzx. However, sparse complains, and adding __force casts doesn't seem like a good idea, so instead we just add a simple helper function to check for the zero return value. Since wg_examine_packet_protocol itself gets inlined, this winds up not adding an additional branch to the generated code, since the 0 return value already happens in a mergable branch. Reported-by: Fabian Freyer <fabianfreyer@radicallyopensecurity.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18net: phy: realtek: read actual speed to detect downshiftHeiner Kallweit
At least some integrated PHY's in RTL8168/RTL8125 chip versions support downshift, and the actual link speed can be read from a vendor-specific register. Info about this register was provided by Realtek. More details about downshift configuration (e.g. number of attempts) aren't available, therefore the downshift tunable is not implemented. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Expose devlink resource occupancy for countersJiri Pirko
Implement occupancy counting for counters and expose over devlink resource API. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Consolidate subpools initializationJiri Pirko
Put all init operations related to subpools into mlxsw_sp_counter_sub_pools_init(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Move config validation along with resource registerJiri Pirko
Move the validation of subpools configuration, to avoid possible over commitment to resource registration. Add WARN_ON to indicate bug in the code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Expose subpool sizes over devlink resourcesJiri Pirko
Implement devlink resources support for counter pools. Move the subpool sizes calculations into the new resources register function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Add entry_size_res_id for each subpool and use it to ↵Jiri Pirko
query entry size Add new field to subpool struct that would indicate which resource id should be used to query the entry size for the subpool from the device. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Move sub_pools under per-instance pool structJiri Pirko
Currently, the global static array of subpools is used. Make it per-instance as multiple instances of the mlxsw driver can have different values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18mlxsw: spectrum_cnt: Query bank size from FW resourcesJiri Pirko
The bank size is different between Spectrum versions. Also it is a resource that can be queried. So instead of hard coding the value in code, query it from the firmware. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18vxlan: check return value of gro_cells_init()Taehee Yoo
gro_cells_init() returns error if memory allocation is failed. But the vxlan module doesn't check the return value of gro_cells_init(). Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer")` Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18cxgb4: rework TC filter rule insertion across regionsRahul Lakkireddy
Chelsio NICs have 3 filter regions, in following order of priority: 1. High Priority (HPFILTER) region (Highest Priority). 2. HASH region. 3. Normal FILTER region (Lowest Priority). Currently, there's a 1-to-1 mapping between the prio value passed by TC and the filter region index. However, it's possible to have multiple TC rules with the same prio value. In this case, if a region is exhausted, no attempt is made to try inserting the rule in the next available region. So, rework and remove the 1-to-1 mapping. Instead, dynamically select the region to insert the filter rule, as long as the new rule's prio value doesn't conflict with existing rules across all the 3 regions. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18Merge tag 'iwlwifi-next-for-kalle-2020-03-17' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First set of iwlwifi patches intended for v5.7 * Refactoring of the device selection algorithms;
2020-03-18ath11k: Perform per-msdu rx processingSriram R
As Hash based reo destination selection is configured, the decapped packets reach different reo destintion rings based on the destintaion ring selected for the computed hash (based on the 5-tuple {ip src/ip dst/src port/dst port/protocol}) by hw and as configured by driver. Hence the current implementation of amsdu list based processing after all the subframes of amsdu are received (since all msdu's for a pdev are received in same reo dest ring), is not applicable here and hence is replaced with per msdu based handling as these subframes can be received in different reo dest rings. Also, as some of the rx descriptor fields might be valid only for the first msdu (for ex. received 80211 header, encryption type, etc), it might not be useful now as we cannot sync between different subframes received in different rings. Hence do not rely on those fields and replace them with fieds valid only on per msdu descriptors. Also cache other details such as encryption type for a peer so that it can be reused when a packet is received from it. Co-developed-by: Tamizh Chelvam Raja <tamizhr@codeaurora.org> Signed-off-by: Tamizh Chelvam Raja <tamizhr@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-18ath11k: Configure hash based reo destination ring selectionSriram R
Current implementation of pdev based reo destination ring selection is replaced by hash based ring selection so as to ensure all the available rings are utilized for better performance. The 4 reo destination rings are selected by the HW based on the hash value computed from the received packet based on the 5 tuple {ip src/ip dst/src port/dst port/protocol}. Out of the 32 hash values used by the hw, the driver assigns 8 values per reo destination ring to each of the 4 reo destination rings. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-18ath11k: Adding proper validation before accessing tx_statsPravas Kumar Panda
Before dumping tx_stats proper validation was not been taken care of. Due to which we were encountering null pointer dereference(kernel panic). This scenario will arise when a station is getting disconnected and we are changing the STA state by ath11k_mac_op_sta_state and assigning tx_stats as NULL and after this the mac80211 will destroy the debugfs entry from where we are trying to read the stats. If anyone tries to dump tx_stats for that STA in between setting tx_stats to NULL and debugfs file removal without checking the NULL value it will run into a NULL pointer exception. Proceeding with the analysis of "ARM Kernel Panic". The APSS crash happened due to OOPS on CPU 3. Crash Signature : Unable to handle kernel NULL pointer dereference at virtual address 00000360 During the crash, PC points to "ath11k_debug_htt_stats_init+0x16ac/0x1acc [ath11k]" LR points to "ath11k_debug_htt_stats_init+0x1688/0x1acc [ath11k]". The Backtrace obtained is as follows: [<ffffffbffcfd8590>] ath11k_debug_htt_stats_init+0x16ac/0x1acc [ath11k] [<ffffffc000156320>] do_loop_readv_writev+0x60/0xa4 [<ffffffc000156a5c>] do_readv_writev+0xd8/0x19c [<ffffffc000156b54>] vfs_readv+0x34/0x48 [<ffffffc00017d6f4>] default_file_splice_read+0x1a8/0x2e4 [<ffffffc00017c56c>] do_splice_to+0x78/0x98 [<ffffffc00017c63c>] splice_direct_to_actor+0xb0/0x1a4 [<ffffffc00017c7b4>] do_splice_direct+0x84/0xa8 [<ffffffc000156f40>] do_sendfile+0x160/0x2a4 [<ffffffc000157980>] SyS_sendfile64+0xb4/0xc8 Signed-off-by: Pravas Kumar Panda <kumarpan@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-18ath11k: dump SRNG stats during FW assertManikanta Pubbisetty
Dumping the SRNG stats during FW assert, this would help in debugging ring stuck issues. Co-developed-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-18ath11k: fill channel info from rx channelVenkateswara Naralasetty
Fill the channel information from rx channel for the packet which has invalid channel info from meta data. Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-18ath11k: Supporting RX ring backpressure HTT event and stats handlingSriram R
The Firmware sends HTT event to host whenever there is a backpressure on RX rings, Handling such event and dumping info on the console under the "ATH11K_DBG_DP_HTT" debug level. Fetching RX ring backpressure histogram from FW via htt_stats debugfs. #echo "24" > /sys/kernel/debug/ath11k/ipq8074/macX/htt_stats_type #cat /sys/kernel/debug/ath11k/ipq8074/macX/htt_stats Signed-off-by: Vikas Patel <vikpatel@codeaurora.org> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2020-03-17net: phy: sfp-bus.c: get rid of docs warningsMauro Carvalho Chehab
The indentation for the returned values are weird, causing those warnings: ./drivers/net/phy/sfp-bus.c:579: WARNING: Unexpected indentation. ./drivers/net/phy/sfp-bus.c:619: WARNING: Unexpected indentation. Use a list and change the identation for it to be properly parsed by the documentation toolchain. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: phylink: pcs: add 802.3 clause 45 helpersRussell King
Implement helpers for PCS accessed via the MII bus using 802.3 clause 45 cycles for 10GBASE-R. Only link up/down is supported, 10G full duplex is assumed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: phylink: pcs: add 802.3 clause 22 helpersRussell King
Implement helpers for PCS accessed via the MII bus using 802.3 clause 22 cycles, conforming to 802.3 clause 37 and Cisco SGMII specifications for the advertisement word. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: mdiobus: add APIs for modifying a MDIO device registerRussell King
Add APIs for modifying a MDIO device register, similar to the existing phy_modify() group of functions, but at mdiobus level instead. Adapt __phy_modify_changed() to use the new mdiobus level helper. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: mdiobus: avoid BUG_ON() in mdiobus accessorsRussell King
Avoid using BUG_ON() in the mdiobus accessors, prefering instead to use WARN_ON_ONCE() and returning an error. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: stmmac: Add support for Enterprise MAC versionJose Abreu
Adds the support for Enterprise MAC IP version which is very similar to XGMAC. It's so similar that we just need to check the device id and add new speeds definitions and some minor callbacks. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: stmmac: Add XLGMII supportJose Abreu
Add XLGMII support for stmmac including the list of speeds and defines for them. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: phy: xpcs: Add XLGMII supportJose Abreu
Add XLGMII support for XPCS. This does not include Autoneg feature. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-02 18:48:21 +0000