summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-09-17ath10k: snoc: skip regulator operationsBjorn Andersson
The regulator operations is trying to set a voltage to a fixed value, by giving some wiggle room. But some board designs specifies regulator voltages outside this limited range. One such example is the Lenovo Yoga C630, with vdd-3.3-ch0 in particular specified at 3.1V. But consumers with fixed voltage requirements should just rely on the board configuration to provide the power at the required level, so this code should be removed. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: Fix HOST capability QMI incompatibilityBjorn Andersson
The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI message") served the purpose of supporting the new and extended HOST capability QMI message. But while the new message adds a slew of optional members it changes the data type of the "daemon_support" member, which means that older versions of the firmware will fail to decode the incoming request message. There is no way to detect this breakage from Linux and there's no way to recover from sending the wrong message (i.e. we can't just try one format and then fallback to the other), so a quirk is introduced in DeviceTree to indicate to the driver that the firmware requires the 8bit version of this message. Cc: stable@vger.kernel.org Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-17ath10k: Check if station exists before forwarding tx airtime reportHauke Mehrtens
It looks like the FW on QCA9984 already reports the tx airtimes before the station is added to the peer entry. The peer entry is created in ath10k_peer_map_event() just with the vdev_id and the ethaddr, but not with a station entry, this is added later in ath10k_peer_create() in callbacks from mac80211. When there is no sta added to the peer entry, this function fails because it calls ieee80211_sta_register_airtime() with NULL. This was reported in OpenWrt some time ago: https://bugs.openwrt.org/index.php?do=details&task_id=2414 This commit should fix this crash: [ 75.991714] Unable to handle kernel paging request at virtual address fffff9e8 [ 75.991756] pgd = c0204000 [ 75.997955] [fffff9e8] *pgd=5fdfd861, *pte=00000000, *ppte=00000000 [ 76.000537] Internal error: Oops: 37 [#1] SMP ARM [ 76.006686] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat chaoskey fuse sch_cake sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 [ 76.059974] cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ip_gre gre ifb sit tunnel4 ip_tunnel tun vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha1_generic md5 md4 [ 76.130634] usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat crc32c_generic [ 76.154772] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.132 #0 [ 76.177001] Hardware name: Generic DT based system [ 76.182990] task: c0b06d80 task.stack: c0b00000 [ 76.187832] PC is at ieee80211_sta_register_airtime+0x24/0x148 [mac80211] [ 76.192211] LR is at ath10k_htt_t2h_msg_handler+0x678/0x10f4 [ath10k_core] [ 76.199052] pc : [<bf75bfac>] lr : [<bf83e8b0>] psr: a0000113 [ 76.205820] sp : c0b01d54 ip : 00000002 fp : bf869c0c [ 76.211981] r10: 0000003c r9 : dbdca138 r8 : 00060002 [ 76.217192] r7 : 00000000 r6 : dabe1150 r5 : 00000000 r4 : dbdc95c0 [ 76.222401] r3 : 00000000 r2 : 00060002 r1 : 00000000 r0 : 00000000 [ 76.229003] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 76.235509] Control: 10c5787d Table: 5c94006a DAC: 00000051 [ 76.242716] Process swapper/0 (pid: 0, stack limit = 0xc0b00210) [ 76.248446] Stack: (0xc0b01d54 to 0xc0b02000) [ 76.254532] 1d40: dbdc95c0 00000000 dabe1150 [ 76.258808] 1d60: 00000001 dabe1150 dbdca138 0000003c bf869c0c bf83e8b0 00000002 c0314b10 [ 76.266969] 1d80: dbdc9c70 00000001 00000001 dabe114c 00010000 00000000 dbdcd724 bf88f3d8 [ 76.275126] 1da0: c0310d28 db393c00 dbdc95c0 00000000 c0b01dd0 c07fb4c4 dbdcd724 00000001 [ 76.283286] 1dc0: 00000022 bf88b09c db393c00 00000022 c0b01dd0 c0b01dd0 00000000 dbdcc5c0 [ 76.291445] 1de0: bf88f04c dbdcd654 dbdcd71c dbdc95c0 00000014 dbdcd724 dbdcc5c0 00000005 [ 76.299605] 1e00: 0004b400 bf85c360 00000000 bf87101c c0b01e24 00000006 00000000 dbdc95c0 [ 76.307764] 1e20: 00000001 00000040 0000012c c0b01e80 1cf51000 bf85c448 dbdcd440 dbdc95c0 [ 76.315925] 1e40: dbdca440 ffffa880 00000040 bf88cb68 dbdcd440 00000001 00000040 ffffa880 [ 76.324084] 1e60: c0b02d00 c06d72e0 dd990080 c0a3f080 c0b255dc c0b047e4 c090afac c090e80c [ 76.332244] 1e80: c0b01e80 c0b01e80 c0b01e88 c0b01e88 dd4cc200 00000000 00000003 c0b0208c [ 76.340405] 1ea0: c0b02080 40000003 ffffe000 00000100 c0b02080 c03015c8 00000000 00000001 [ 76.348564] 1ec0: dd408000 c0a38210 c0b2c7c0 0000000a ffffa880 c0b02d00 c07fb764 00200102 [ 76.356723] 1ee0: dd4cc268 c0a3e414 00000000 00000000 00000001 dd408000 de803000 00000000 [ 76.364883] 1f00: 00000000 c03247cc c0a3e414 c0368f1c c0b03f60 c0b153cc de80200c de802000 [ 76.373042] 1f20: c0b01f48 c0301488 c0308630 60000013 ffffffff c0b01f7c 00000000 c0b00000 [ 76.381204] 1f40: 00000000 c030c08c 00000001 00000000 00000000 c0315180 ffffe000 c0b03cc0 [ 76.389363] 1f60: c0b03c70 00000000 00000000 c0a2da28 00000000 00000000 c0b01f90 c0b01f98 [ 76.397522] 1f80: c030862c c0308630 60000013 ffffffff 00000051 00000000 ffffe000 c035dd18 [ 76.405681] 1fa0: 000000bf c0b03c40 00000000 c0b2c000 dddfce80 c035e060 c0b2c040 c0a00cf4 [ 76.413842] 1fc0: ffffffff ffffffff 00000000 c0a0067c c0a2da28 00000000 00000000 c0b2c1d4 [ 76.422001] 1fe0: c0b03c5c c0a2da24 c0b07ee0 4220406a 512f04d0 4220807c 00000000 00000000 [ 76.430335] [<bf75bfac>] (ieee80211_sta_register_airtime [mac80211]) from [<00000002>] (0x2) [ 76.438314] Code: e1cd81f0 e1a08002 e1cda1f8 e58de020 (e5102618) [ 76.446965] ---[ end trace 227a38ade964d642 ]--- Fixes: bb31b7cb106c ("ath10k: report tx airtime provided by fw") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...
2019-09-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-09-16mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared bufferShalom Toledo
While debugging packet loss towards the CPU, it is useful to be able to query the CPU port's shared buffer quotas and occupancy. Since the CPU port has no ingress buffers, all the shared buffers ingress information will be cleared. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16mlxsw: spectrum: Register CPU port with devlinkShalom Toledo
Register CPU port with devlink. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16mlxsw: spectrum_buffers: Prevent changing CPU port's configurationShalom Toledo
Next patch is going to register the CPU port with devlink, but only so that the CPU port's shared buffer configuration and occupancy could be queried. Prevent changing CPU port's shared buffer threshold and binding configuration. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: fix incorrect update of intr_delay_resolutionArthur Kiyanovski
ena_dev->intr_moder_rx/tx_interval save the intervals received from the user after dividing them by ena_dev->intr_delay_resolution. Therefore when intr_delay_resolution changes, the code needs to first mutiply intr_moder_rx/tx_interval by the previous intr_delay_resolution to get the value originally given by the user, and only then divide it by the new intr_delay_resolution. Current code does not first multiply intr_moder_rx/tx_interval by the old intr_delay_resolution. This commit fixes it. Also initialize ena_dev->intr_delay_resolution to be 1. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: fix retrieval of nonadaptive interrupt moderation intervalsArthur Kiyanovski
Nonadaptive interrupt moderation intervals are assigned the value set by the user in ethtool -C divided by ena_dev->intr_delay_resolution. Therefore when the user tries to get the nonadaptive interrupt moderation intervals with ethtool -c the code needs to multiply the saved value by ena_dev->intr_delay_resolution. The current code erroneously divides instead of multiplying in ethtool -c. This patch fixes this. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: fix update of interrupt moderation registerArthur Kiyanovski
Current implementation always updates the interrupt register with the smoothed_interval of the rx_ring. However this should be done only in case of adaptive interrupt moderation. If non-adaptive interrupt moderation is used, the non-adaptive interrupt moderation interval should be used. This commit fixes that. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: remove all old adaptive rx interrupt moderation code from ena_comArthur Kiyanovski
Remove previous implementation of adaptive rx interrupt moderation from ena_com files. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: remove ena_restore_ethtool_params() and relevant fieldsArthur Kiyanovski
Deleted unused 4 fields from struct ena_adapter and their only user ena_restore_ethtool_params(). Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: remove old adaptive interrupt moderation code from ena_netdevArthur Kiyanovski
1. Out of the fields {per_napi_bytes, per_napi_packets} in struct ena_ring, only rx_ring->per_napi_packets are used to determine if napi did work for dim. This commit removes all other uses of these fields. 2. Remove ena_ring->moder_tbl_idx, which is not used by dim. 3. Remove all calls to ena_com_destroy_interrupt_moderation(), since all it did was to destroy the interrupt moderation table, which is removed as part of removing old interrupt moderation code. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: remove code duplication in ↵Arthur Kiyanovski
ena_com_update_nonadaptive_moderation_interval _*() Remove code duplication in: ena_com_update_nonadaptive_moderation_interval_tx() ena_com_update_nonadaptive_moderation_interval_rx() functions. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: enable the interrupt_moderation in driver_supported_featuresArthur Kiyanovski
Add driver_supported_features to host_host info which is a new API used to communicate to the device which features are supported by the driver. Add the interrupt_moderation bit to host_info->driver_supported_features and enable it to signal the device that this driver supports interrupt moderation properly. Reserved bits are for features implemented in the future Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: reimplement set/get_coalesce()Arthur Kiyanovski
1. Remove old adaptive interrupt moderation code from set/get_coalesce() 2. Add ena_update_rx_rings_intr_moderation() function for updating nonadaptive interrupt moderation intervals similarly to ena_update_tx_rings_intr_moderation(). 3. Remove checks of multiple unsupported received interrupt coalescing parameters. This makes code cleaner and cancels the need to update it every time a new coalescing parameter is invented. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: switch to dim algorithm for rx adaptive interrupt moderationArthur Kiyanovski
Use the dim library for the rx adaptive interrupt moderation implementation Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: add intr_moder_rx_interval to struct ena_com_dev and use itArthur Kiyanovski
Add intr_moder_rx_interval to struct ena_com_dev and use it as the location where the interrupt moderation rx interval is saved, instead of the interrupt moderation table. This is done as a first step before removing the old interrupt moderation code. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: phy: adin: implement Energy Detect Powerdown mode via phy-tunableAlexandru Ardelean
This driver becomes the first user of the kernel's `ETHTOOL_PHY_EDPD` phy-tunable feature. EDPD is also enabled by default on PHY config_init, but can be disabled via the phy-tunable control. When enabling EDPD, it's also a good idea (for the ADIN PHYs) to enable TX periodic pulses, so that in case the other PHY is also on EDPD mode, there is no lock-up situation where both sides are waiting for the other to transmit. Via the phy-tunable control, TX pulses can be disabled if specifying 0 `tx-interval` via ethtool. The ADIN PHY supports only fixed 1 second intervals; they cannot be configured. That is why the acceptable values are 1, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS and ETHTOOL_PHY_EDPD_NO_TX (which disables TX pulses). Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16xen-netfront: do not assume sk_buff_head list is empty in error handlingDongli Zhang
When skb_shinfo(skb) is not able to cache extra fragment (that is, skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS), xennet_fill_frags() assumes the sk_buff_head list is already empty. As a result, cons is increased only by 1 and returns to error handling path in xennet_poll(). However, if the sk_buff_head list is not empty, queue->rx.rsp_cons may be set incorrectly. That is, queue->rx.rsp_cons would point to the rx ring buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL. This leads to NULL pointer access in the next iteration to process rx ring buffer entries. Below is how xennet_poll() does error handling. All remaining entries in tmpq are accounted to queue->rx.rsp_cons without assuming how many outstanding skbs are remained in the list. 985 static int xennet_poll(struct napi_struct *napi, int budget) ... ... 1032 if (unlikely(xennet_set_skb_gso(skb, gso))) { 1033 __skb_queue_head(&tmpq, skb); 1034 queue->rx.rsp_cons += skb_queue_len(&tmpq); 1035 goto err; 1036 } It is better to always have the error handling in the same way. Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: ena: don't wake up tx queue when downSameeh Jubran
There is a race condition that can occur when calling ena_down(). The ena_clean_tx_irq() - which is a part of the napi handler - function might wake up the tx queue when the queue is supposed to be down (during recovery or changing the size of the queues for example) This causes the ena_start_xmit() function to trigger and possibly try to access the destroyed queues. The race is illustrated below: Flow A: Flow B(napi handler) ena_down() netif_carrier_off() netif_tx_disable() ena_clean_tx_irq() netif_tx_wake_queue() ena_napi_disable_all() ena_destroy_all_io_queues() After these flows the tx queue is active and ena_start_xmit() accesses the destroyed queue which leads to a kernel panic. fixes: 1738cd3ed342 (net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)) Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16netdevsim: Set offsets to various protocol layersIdo Schimmel
The driver periodically generates "trapped" UDP packets that it then passes on to devlink. Set the offsets to the various protocol layers. This is a prerequisite to the next patch, where drop monitor is taught to check that the offset to the MAC header was set. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offloadVladimir Oltean
This qdisc offload is the closest thing to what the SJA1105 supports in hardware for time-based egress shaping. The switch core really is built around SAE AS6802/TTEthernet (a TTTech standard) but can be made to operate similarly to IEEE 802.1Qbv with some constraints: - The gate control list is a global list for all ports. There are 8 execution threads that iterate through this global list in parallel. I don't know why 8, there are only 4 front-panel ports. - Care must be taken by the user to make sure that two execution threads never get to execute a GCL entry simultaneously. I created a O(n^4) checker for this hardware limitation, prior to accepting a taprio offload configuration as valid. - The spec says that if a GCL entry's interval is shorter than the frame length, you shouldn't send it (and end up in head-of-line blocking). Well, this switch does anyway. - The switch has no concept of ADMIN and OPER configurations. Because it's so simple, the TAS settings are loaded through the static config tables interface, so there isn't even place for any discussion about 'graceful switchover between ADMIN and OPER'. You just reset the switch and upload a new OPER config. - The switch accepts multiple time sources for the gate events. Right now I am using the standalone clock source as opposed to PTP. So the base time parameter doesn't really do much. Support for the PTP clock source will be added in a future series. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: dsa: sja1105: Advertise the 8 TX queuesVladimir Oltean
This is a preparation patch for the tc-taprio offload (and potentially for other future offloads such as tc-mqprio). Instead of looking directly at skb->priority during xmit, let's get the netdev queue and the queue-to-traffic-class mapping, and put the resulting traffic class into the dsa_8021q PCP field. The switch is configured with a 1-to-1 PCP-to-ingress-queue-to-egress-queue mapping (see vlan_pmap in sja1105_main.c), so the effect is that we can inject into a front-panel's egress traffic class through VLAN tagging from Linux, completely transparently. Unfortunately the switch doesn't look at the VLAN PCP in the case of management traffic to/from the CPU (link-local frames at 01-80-C2-xx-xx-xx or 01-1B-19-xx-xx-xx) so we can't alter the transmission queue of this type of traffic on a frame-by-frame basis. It is only selected through the "hostprio" setting which ATM is harcoded in the driver to 7. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: dsa: sja1105: Add static config tables for schedulingVladimir Oltean
In order to support tc-taprio offload, the TTEthernet egress scheduling core registers must be made visible through the static interface. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16bnxt_en: Add a new BNXT_FW_RESET_STATE_POLL_FW_DOWN state.Vasundhara Volam
This new state is required when firmware indicates that the error recovery process requires polling for firmware state to be completely down before initiating reset. For example, firmware may take some time to collect the crash dump before it is down and ready to be reset. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16bnxt_en: Update firmware interface spec. to 1.10.0.100.Michael Chan
Some error recovery updates to the spec., among other minor changes. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16bnxt_en: Increase timeout for HWRM_DBG_COREDUMP_XX commandsVasundhara Volam
Firmware coredump messages take much longer than standard messages, so increase the timeout accordingly. Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16bnxt_en: Don't proceed in .ndo_set_rx_mode() when device is not in open state.Michael Chan
Check the BNXT_STATE_OPEN flag instead of netif_running() in bnxt_set_rx_mode(). If the driver is going through any reset, such as firmware reset or even TX timeout, it may not be ready to set the RX mode and may crash. The new rx mode settings will be picked up when the device is opened again later. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: mdio: switch to using gpiod_get_optional()Dmitry Torokhov
The MDIO device reset line is optional and now that gpiod_get_optional() returns proper value when GPIO support is compiled out, there is no reason to use fwnode_get_named_gpiod() that I plan to hide away. Let's switch to using more standard gpiod_get_optional() and gpiod_set_consumer_name() to keep the nice "PHY reset" label. Also there is no reason to only try to fetch the reset GPIO when we have OF node, gpiolib can fetch GPIO data from firmwares as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-09-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Now that initial BPF backend for gcc has been merged upstream, enable BPF kselftest suite for bpf-gcc. Also fix a BE issue with access to bpf_sysctl.file_pos, from Ilya. 2) Follow-up fix for link-vmlinux.sh to remove bash-specific extensions related to recent work on exposing BTF info through sysfs, from Andrii. 3) AF_XDP zero copy fixes for i40e and ixgbe driver which caused umem headroom to be added twice, from Ciara. 4) Refactoring work to convert sock opt tests into test_progs framework in BPF kselftests, from Stanislav. 5) Fix a general protection fault in dev_map_hash_update_elem(), from Toke. 6) Cleanup to use BPF_PROG_RUN() macro in KCM, from Sami. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16ixgbe: fix xdp handle calculationsCiara Loftus
Commit 7cbbf9f1fa23 ("ixgbe: fix xdp handle calculations") reintroduced the addition of the umem headroom to the xdp handle in the ixgbe_zca_free, ixgbe_alloc_buffer_slow_zc and ixgbe_alloc_buffer_zc functions. However, the headroom is already added to the handle in the function ixgbe_run_xdp_zc. This commit removes the latter addition and fixes the case where the headroom is non-zero. Fixes: 7cbbf9f1fa23 ("ixgbe: fix xdp handle calculations") Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-16i40e: fix xdp handle calculationsCiara Loftus
Commit 4c5d9a7fa149 ("i40e: fix xdp handle calculations") reintroduced the addition of the umem headroom to the xdp handle in the i40e_zca_free, i40e_alloc_buffer_slow_zc and i40e_alloc_buffer_zc functions. However, the headroom is already added to the handle in the function i40_run_xdp_zc. This commit removes the latter addition and fixes the case where the headroom is non-zero. Fixes: 4c5d9a7fa149 ("i40e: fix xdp handle calculations") Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-16net: stmmac: socfpga: re-use the `interface` parameter from platform dataAlexandru Ardelean
The socfpga sub-driver defines an `interface` field in the `socfpga_dwmac` struct and parses it on init. The shared `stmmac_probe_config_dt()` function also parses this from the device-tree and makes it available on the returned `plat_data` (which is the same data available via `netdev_priv()`). All that's needed now is to dig that information out, via some `dev_get_drvdata()` && `netdev_priv()` calls and re-use it. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net/wan: dscc4: remove broken dscc4 driverDan Carpenter
Using static analysis, I discovered that the "dpriv->pci_priv->pdev" pointer is always NULL. This pointer was supposed to be initialized during probe and is essential for the driver to work. It would be easy to add a "ppriv->pdev = pdev;" to dscc4_found1() but this driver has been broken since before we started using git and no one has complained so probably we should just remove it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: stmmac: Hold rtnl lock in suspend/resume callbacksJose Abreu
We need to hold rnl lock in suspend and resume callbacks because phylink requires it. Otherwise we will get a WARN() in suspend and resume. Also, move phylink start and stop callbacks to inside device's internal lock so that we prevent concurrent HW accesses. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Reported-by: Christophe ROULLIER <christophe.roullier@st.com> Tested-by: Christophe ROULLIER <christophe.roullier@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16qed: fix spelling mistake "fullill" -> "fulfill"Colin Ian King
There is a spelling mistake in a DP_VERBOSE debug message. Fix it. (Using American English spelling as this is the most common way to spell this in the kernel). Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16net: dsa: b53: Add support for port_egress_floods callbackFlorian Fainelli
Add support for configuring the per-port egress flooding control for both Unicast and Multicast traffic. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't corrupt xfrm_interface parms before validation, from Nicolas Dichtel. 2) Revert use of usb-wakeup in btusb, from Mario Limonciello. 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from Leonardo Bras. 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso. 5) Missing ULP check in sock_map, from John Fastabend. 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun. 7) Fix length of SKB allocated in 6pack driver, from Christophe JAILLET. 8) ip6_route_info_create() returns an error pointer, not NULL. From Maciej Żenczykowski. 9) Only add RDS sock to the hashes after rs_transport is set, from Ka-Cheong Poon. 10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets. 11) Presence of transmit IPSEC offload in an SKB is not tested for correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff Kirsher. 12) Need rcu_barrier() when register_netdevice() takes one of the notifier based failure paths, from Subash Abhinov Kasiviswanathan. 13) Fix leak in sctp_do_bind(), from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) cdc_ether: fix rndis support for Mediatek based smartphones sctp: destroy bucket if failed to bind addr sctp: remove redundant assignment when call sctp_get_port_local sctp: change return type of sctp_get_port_local ixgbevf: Fix secpath usage for IPsec Tx offload sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' ixgbe: Fix secpath usage for IPsec TX offload. net: qrtr: fix memort leak in qrtr_tun_write_iter net: Fix null de-reference of device refcount ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' tun: fix use-after-free when register netdev failed tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR ixgbe: fix double clean of Tx descriptors with xdp ixgbe: Prevent u8 wrapping of ITR value to something less than 10us mlx4: fix spelling mistake "veify" -> "verify" net: hns3: fix spelling mistake "undeflow" -> "underflow" net: lmc: fix spelling mistake "runnin" -> "running" NFC: st95hf: fix spelling mistake "receieve" -> "receive" net/rds: An rds_sock is added too early to the hash table mac80211: Do not send Layer 2 Update frame before authorization ...
2019-09-14Merge tag 'wireless-drivers-next-for-davem-2019-09-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.4 Last set of patches for 5.4. wil6210 and rtw88 being most active this time, but ath9k also having a new module to load devices without EEPROM. Major changes: wil6210 * add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11 * add debugfs file to show PCM ring content * report boottime_ns in scan results ath9k * add a separate loader for AR92XX (and older) pci(e) without eeprom brcmfmac * use the same wiphy after PCIe reset to not confuse the user space rtw88 * enable interrupt migration * enable AMSDU in AMPDU aggregation * report RX power for each antenna * enable to DPK and IQK calibration methods to improve performance ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13net: devlink: move reload fail indication to devlink core and expose to userJiri Pirko
Currently the fact that devlink reload failed is stored in drivers. Move this flag into devlink core. Also, expose it to the user. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13net: devlink: split reload op into twoJiri Pirko
In order to properly implement failure indication during reload, split the reload op into two ops, one for down phase and one for up phase. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13mlx4: Split restart_one into two functionsJiri Pirko
Split the function restart_one into two functions and separate teardown and buildup. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13cdc_ether: fix rndis support for Mediatek based smartphonesBjørn Mork
A Mediatek based smartphone owner reports problems with USB tethering in Linux. The verbose USB listing shows a rndis_host interface pair (e0/01/03 + 10/00/00), but the driver fails to bind with [ 355.960428] usb 1-4: bad CDC descriptors The problem is a failsafe test intended to filter out ACM serial functions using the same 02/02/ff class/subclass/protocol as RNDIS. The serial functions are recognized by their non-zero bmCapabilities. No RNDIS function with non-zero bmCapabilities were known at the time this failsafe was added. But it turns out that some Wireless class RNDIS functions are using the bmCapabilities field. These functions are uniquely identified as RNDIS by their class/subclass/protocol, so the failing test can safely be disabled. The same applies to the two types of Misc class RNDIS functions. Applying the failsafe to Communication class functions only retains the original functionality, and fixes the problem for the Mediatek based smartphone. Tow examples of CDC functional descriptors with non-zero bmCapabilities from Wireless class RNDIS functions are: 0e8d:000a Mediatek Crosscall Spider X5 3G Phone CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x0f connection notifications sends break line coding and serial state get/set/clear comm features CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 and 19d2:1023 ZTE K4201-z CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 The Mediatek example is believed to apply to most smartphones with Mediatek firmware. The ZTE example is most likely also part of a larger family of devices/firmwares. Suggested-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13Merge tag 'v5.3-rc8' into rdma.git for-nextJason Gunthorpe
To resolve dependencies in following patches mlx5_ib.h conflict resolved by keeing both hunks Linux 5.3-rc8 Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.4. Major changes: wil6210 * add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11 * add debugfs file to show PCM ring content * report boottime_ns in scan results ath9k * add a separate loader for AR92XX (and older) pci(e) without eeprom, enabled with the new ATH9K_PCI_NO_EEPROM Kconfig option
2019-09-13rtw88: report RX power for each antennaYan-Hsuan Chuang
Report chains and chain_signal in ieee80211_rx_status. It is useful for program such as tcpdump to see if the antennas are well connected/placed. 8822C is able to receive CCK rates with 2 antennas, while 8822B can only use 1 antenna path to receive CCK rates. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: fix wrong rx power calculationTsang-Shian Lin
Fix the wrong RF path for CCK rx power calculation. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-15 20:51:01 +0000