summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-10-31net: hns3: cleanup some magic numbersGuojia Liao
To make the code more readable, this patch replaces some magic numbers with macro or sizeof operation. Also uses macro lower_32_bits and upper_32_bits to get bits 0-31 and 32-63 of a number, instead of using type conversion and '>>' operation. No functional change. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: add struct netdev_queue debug info for TX timeoutYunsheng Lin
When there is a TX timeout, we can tell if the driver or stack has stopped the queue by looking at state field, and when has the last packet transmited by looking at trans_start field. So this patch prints these two field in the hns3_get_tx_timeo_queue_info(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: dump some debug information when reset failHuazhong Tan
When reset fails, there is some information that will help for finding out why does reset fail. and removes an unused core_rst_cnt field in struct hclge_rst_stats. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31bnxt_en: Add support to collect crash dump via ethtoolVasundhara Volam
Driver supports 2 types of core dumps. 1. Live dump - Firmware dump when system is up and running. 2. Crash dump - Dump which is collected during firmware crash that can be retrieved after recovery. Crash dump is currently supported only on specific 58800 chips which can be retrieved using OP-TEE API only, as firmware cannot access this region directly. User needs to set the dump flag using following command before initiating the dump collection: $ ethtool -W|--set-dump eth0 N Where N is "0" for live dump and "1" for crash dump Command to collect the dump after setting the flag: $ ethtool -w eth0 data Filename v3: Modify set_dump to support even when CONFIG_TEE_BNXT_FW=n. Also change log message to netdev_info(). Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31bnxt_en: Add support to invoke OP-TEE API to reset firmwareVasundhara Volam
In error recovery process when firmware indicates that it is completely down, initiate a firmware reset by calling OP-TEE API. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Generalize split count checkJiri Pirko
Make the check generic for any possible value, not only 2 and 4. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Iterate over all ports in gap during unsplit createJiri Pirko
During recreation of original unsplit ports, just simply iterate over the whole gap and recreate whatever originally existed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Fix base port get for split count 4 and 8Jiri Pirko
The current code considers only split by 2 or 4. Make the base port getting generic and allow split by 8 to be handled correctly. Generalize the used port checks as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use port_module_max_width to compute base port indexJiri Pirko
Instead of using constant value, use port_module_max_width which is aligned with the cluster size. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Remember split base local port and use it in unsplitJiri Pirko
Don't compute the original base local port during unsplit, rather remember it in mlxsw_sp_port structure during split port creation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Introduce resource for getting offset of 4 lanes split portJiri Pirko
In Spectrum-3 the modules have 8 lanes, so split by count 2 results in two split ports each of 4 lanes. Add a resource that can be used to obtain local port offset in that case. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Push getting offsets of split ports into a helperJiri Pirko
Get local port offsets of split port in a separate helper function and use it in both split and unsplit function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Add sanity checks into module info getJiri Pirko
Driver assumes certain values in the PMLP register. Add checks that verify that PMLP register provides fitting values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Pass mapping values in port mapping structureJiri Pirko
Pass the port mapping structure down to create, module_map and other function instead of individual values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use mapping of port being split for creating split portsJiri Pirko
Don't use constant max width value and instead of that, use the actual width of the port. Also don't pass module value and use the value stored in the same structure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Replace port_to_module array with array of structsJiri Pirko
Store the initial PMLP register configuration into array of structures instead of just simple array of module numbers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Distinguish between unsplittable and split portJiri Pirko
Currently when user does split, he is not able to distinguish if the port cannot be split because it is already split, or because it cannot be split at all. Add another check for split flag to distinguish this. Also add check forbidding split when maximal width is 1. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Move max_width check up before count checkJiri Pirko
The fact that the port cannot be split further should be checked before checking the count, so move it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use PMTM register to get max module widthJiri Pirko
Currently the max module width is hard-coded according to ASIC type. That is not entirely correct, as the max module width might differ per-board. Use PMTM register to query FW for maximal width of a module. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: reg: Add Port Module Type Mapping RegisterJiri Pirko
The PMTM allows query or configuration of module types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: reg: Extend PMLP tx/rx lane value size to 4 bitsJiri Pirko
The tx/rx lane fields got extended to 4 bits, update the reg field description accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31cxgb4/l2t: Simplify 't4_l2e_free()' and '_t4_l2e_free()'Christophe JAILLET
Use '__skb_queue_purge()' instead of re-implementing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mt7601u: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fopszhong jiang
It is more clear to use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs file operation rather than DEFINE_SIMPLE_ATTRIBUTE. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtlwifi: rtl8821ae: Drop condition with no effectSaurav Girepunje
As the "else if" and "else" branch body are identical the condition has no effect. So drop the "else if" condition. Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31b43: dma: Fix use true/false for bool type variableSaurav Girepunje
use true/false for bool type variables assignment. Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31b43: main: Fix use true/false for bool typeSaurav Girepunje
use true/false on bool type variable assignment. Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtlwifi: rtl8192c: Drop condition with no effectSaurav Girepunje
As the "else if" and "else" branch body are identical the condition has no effect. So drop the "else if" condition. Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtw88: remove redundant null pointer check on arraysColin Ian King
The checks to see if swing_table->n or swing_table->p are null are redundant since n and p are arrays and can never be null if swing_table is non-null. I believe these are redundant checks and can be safely removed, especially the checks implies that these are not arrays which can lead to confusion. Addresses-Coverity: ("Array compared against 0") Fixes: c97ee3e0bea2 ("rtw88: add power tracking support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtw88: avoid FW info floodYan-Hsuan Chuang
The FW info was printed everytime driver is powered on, such as leaving IDLE state. It will flood the kernel log. Move the FW info printing to callback when FW is loaded, so that will only be printed once when device is probed. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtw88: fix potential read outside array boundaryTzu-En Huang
The level of cckpd is from 0 to 4, and it is the index of array pd_lvl[] and cs_lvl[]. However, the length of both arrays are 4, which is smaller than the possible maximum input index. Enumerate cck level to make sure the max level will not be wrong if new level is added in future. Fixes: 479c4ee931a6 ("rtw88: add dynamic cck pd mechanism") Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtw88: rearrange if..else statements for rx rate indexesYan-Hsuan Chuang
Driver just memset() rx_status to 0 before assigning rate indexes. And driver could never hit the 'else' because the driver checks if 'pkt_stat->rate >= DESC_RATEMCS0', so the 'else' statement can be removed. Also rearrange the if..else statements because DESC_RATEMCS0 is actually larger than DESC_RATE1M ~ DESC_RATE54M, move the check of 'pkt_stat->rate >= DESC_RATEMCS0' to the last to keep an increasing order. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtw88: use rtw_phy_pg_cfg_pair struct, not arraysYan-Hsuan Chuang
Use proper struct for BB PG tables. TODO: we need to find a way to store the tables that have condition values. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtw88: 8822b: add RFE type 3 supportYan-Hsuan Chuang
Some of the modules use RFE type 3, add corresponding tables for them. Tested-by: G.schlmm <g.schlmm@googlemail.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtw88: fix sparse warnings for power trackingYan-Hsuan Chuang
sparse warnings: drivers/net/wireless/realtek/rtw88/rtw8822b.c:1440:6: sparse: sparse: symbol 'rtw8822b_pwr_track' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/rtw8822c.c:1008:6: sparse: sparse: symbol 'rtw8822c_pwrtrack_init' was not declared. Should it be static? Fixes: c97ee3e0bea2 ("rtw88: add power tracking support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-31rtw88: fix sparse warnings for DPKYan-Hsuan Chuang
sparse warnings: drivers/net/wireless/realtek/rtw88/rtw8822c.c:2871:6: sparse: sparse: symbol 'rtw8822c_dpk_cal_coef1' was not declared. Should it be static? drivers/net/wireless/realtek/rtw88/rtw8822c.c:3112:6: sparse: sparse: symbol 'rtw8822c_dpk_track' was not declared. Should it be static? Fixes: 5227c2ee453d ("rtw88: 8822c: add SW DPK support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-30hv_netvsc: Fix error handling in netvsc_attach()Haiyang Zhang
If rndis_filter_open() fails, we need to remove the rndis device created in earlier steps, before returning an error code. Otherwise, the retry of netvsc_attach() from its callers will fail and hang. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30hv_netvsc: Fix error handling in netvsc_set_features()Haiyang Zhang
When an error is returned by rndis_filter_set_offload_params(), we should still assign the unaffected features to ndev->features. Otherwise, these features will be missing. Fixes: d6792a5a0747 ("hv_netvsc: Add handler for LRO setting change") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30cxgb4: fix panic when attaching to ULD failVishal Kulkarni
Release resources when attaching to ULD fail. Otherwise, data mismatch is seen between LLD and ULD later on, which lead to kernel panic when accessing resources that should not even exist in the first place. Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2019-10-29 This series contains updates to e1000e, igb, ixgbe and i40e drivers. Sasha adds support for Intel client platforms Comet Lake and Tiger Lake to the e1000e driver. Also adds a fix for a compiler warning that was recently introduced, when CONFIG_PM_SLEEP is not defined, so wrap the code that requires this kernel configuration to be defined. Alex fixes a potential race condition between network configuration and power management for e1000e, which is similar to a past issue in the igb driver. Also provided a bit of code cleanup since the driver no longer checks for __E1000_DOWN. Josh Hunt adds UDP segmentation offload support for igb, ixgbe and i40e. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30wimax: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fopszhong jiang
It is more clear to use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs file operation rather than DEFINE_SIMPLE_ATTRIBUTE. It is detected with the help of coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30vxlan: drop "vxlan" parameter in vxlan_fdb_alloc()Guillaume Nault
This parameter has never been used. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30net: phy: marvell: add downshift support for 88E1145Heiner Kallweit
Add downshift support for 88E1145, it uses the same downshift configuration registers as 88E1111. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30bonding: balance ICMP echoes in layer3+4 modeMatteo Croce
The bonding uses the L4 ports to balance flows between slaves. As the ICMP protocol has no ports, those packets are sent all to the same device: # tcpdump -qltnni veth0 ip |sed 's/^/0: /' & # tcpdump -qltnni veth1 ip |sed 's/^/1: /' & # ping -qc1 192.168.0.2 1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 315, seq 1, length 64 1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 315, seq 1, length 64 # ping -qc1 192.168.0.2 1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 316, seq 1, length 64 1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 316, seq 1, length 64 # ping -qc1 192.168.0.2 1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 317, seq 1, length 64 1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 317, seq 1, length 64 But some ICMP packets have an Identifier field which is used to match packets within sessions, let's use this value in the hash function to balance these packets between bond slaves: # ping -qc1 192.168.0.2 0: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 303, seq 1, length 64 0: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 303, seq 1, length 64 # ping -qc1 192.168.0.2 1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 304, seq 1, length 64 1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 304, seq 1, length 64 Aso, let's use a flow_dissector_key which defines FLOW_DISSECTOR_KEY_ICMP, so we can balance pings encapsulated in a tunnel when using mode encap3+4: # ping -q 192.168.1.2 -c1 0: IP 192.168.0.1 > 192.168.0.2: GREv0, length 102: IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 585, seq 1, length 64 0: IP 192.168.0.2 > 192.168.0.1: GREv0, length 102: IP 192.168.1.2 > 192.168.1.1: ICMP echo reply, id 585, seq 1, length 64 # ping -q 192.168.1.2 -c1 1: IP 192.168.0.1 > 192.168.0.2: GREv0, length 102: IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 586, seq 1, length 64 1: IP 192.168.0.2 > 192.168.0.1: GREv0, length 102: IP 192.168.1.2 > 192.168.1.1: ICMP echo reply, id 586, seq 1, length 64 Signed-off-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: Enforce firmware version for Spectrum-2Ido Schimmel
In a similar fashion to Spectrum-1, enforce a specific firmware version for Spectrum-2 so that the driver and firmware are always in sync with regards to new features. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: Bump firmware version to 13.2000.2308Ido Schimmel
The version adds support for querying port module type. It will be used by a followup patch set from Jiri to make port split code more generic. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: pci: Increase PCI reset timeout for SN3800 systemsIdo Schimmel
SN3800 Spectrum-2 based systems have gearboxes that need to be initialized by the firmware during its initialization flow. In certain cases, the firmware might need to flash these gearboxes, which is currently a time-consuming process. In newer firmware versions, the firmware will not signal to the driver that it is ready until the gearboxes are flashed. Increase the PCI reset timeout for these situations. In normal cases, the driver will need to wait no longer than 5 seconds. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: reg: Increase size of MPAR registerIdo Schimmel
In new firmware versions this register is extended with a sampling rate for Spectrum-2 and future ASICs. Increase the size of the register to ensure the field is initialized to 0 which means every packet is mirrored. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: core: Unpublish devlink parameters during reloadJiri Pirko
The devlink parameter "acl_region_rehash_interval" is a runtime parameter whose value is stored in a dynamically allocated memory. While reloading the driver, this memory is freed and then allocated again. A use-after-free might happen if during this time frame someone tries to retrieve its value. Since commit 070c63f20f6c ("net: devlink: allow to change namespaces during reload") the use-after-free can be reliably triggered when reloading the driver into a namespace, as after freeing the memory (via reload_down() callback) all the parameters are notified. Fix this by unpublishing and then re-publishing the parameters during reload. Fixes: 98bbf70c1c41 ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param") Fixes: 7c62cfb8c574 ("devlink: publish params only after driver init is done") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30qed: Optimize execution time for nvm attributes configuration.Sudarsana Reddy Kalluru
Current implementation for nvm_attr configuration instructs the management FW to load/unload the nvm-cfg image for each user-provided attribute in the input file. This consumes lot of cycles even for few tens of attributes. This patch updates the implementation to perform load/commit of the config for every 50 attributes. After loading the nvm-image, MFW expects that config should be committed in a predefined timer value (5 sec), hence it's not possible to write large number of attributes in a single load/commit window. Hence performing the commits in chunks. Fixes: 0dabbe1bb3a4 ("qed: Add driver API for flashing the config attributes.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30vxlan: fix unexpected failure of vxlan_changelink()Taehee Yoo
After commit 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level"), vxlan_changelink() could fail because of netdev_adjacent_change_prepare(). netdev_adjacent_change_prepare() returns -EEXIST when old lower device and new lower device are same. (old lower device is "dst->remote_dev" and new lower device is "lowerdev") So, before calling it, lowerdev should be NULL if these devices are same. Test command1: ip link add dummy0 type dummy ip link add vxlan0 type vxlan dev dummy0 dstport 4789 vni 1 ip link set vxlan0 type vxlan ttl 5 RTNETLINK answers: File exists Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 20:12:13 +0000