summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2024-05-30wifi: rtlwifi: Add rtl8192du/dm.{c,h}Bitterblue Smith
These contain functions related to the dynamic mechanism, which runs every two seconds to adjust to changes in the environment. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/a010ed6d-efb0-456d-bd4a-dfc6da23e7aa@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}Bitterblue Smith
fw.c contains a function for loading the firmware. led.c contains a function for controlling the LED. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/a52b8907-267c-4811-90ca-5eb852a2aa09@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/rf.{c,h}Bitterblue Smith
These contain one RF configuration function and some functions related to dual MAC operation. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/36258d72-11fd-4f70-84c6-782972f706ed@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/trx.{c,h}Bitterblue Smith
These contain routines related to sending frames to the chip. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/bd2c24a0-a1fe-493a-8079-d83fda81a0d5@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/phy.{c,h}Bitterblue Smith
These contain mostly the calibration and channel switching routines for RTL8192DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/299a5ab7-46bf-410b-bbeb-e252eeeeb34c@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/hw.{c,h}Bitterblue Smith
These contain mostly hardware init/deinit routines for RTL8192DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/282afe18-f37d-45f7-9275-68c39d1fde09@gmail.com
2024-05-30wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DUBitterblue Smith
These are needed for the dual MAC version of RTL8192DU. The two mutexes are used to avoid concurrent access to the hardware from the two USB interfaces. The two arrays are filled by one interface during LC calibration and accessed by the other interface during channel switching. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/d1bf581b-de41-4d09-bf56-768c2fc29dd3@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/table.{c,h}Bitterblue Smith
These contain the MAC, BB, RF, and AGC initialisation tables for RTL8192DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/5ea548b9-5ec6-4358-aa5d-94071f2341cb@gmail.com
2024-05-30wifi: rtlwifi: rtl8192d: Use "rtl92d" prefixBitterblue Smith
Some functions moved from rtl8192de still use the "rtl92de" prefix. Rename them. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/abe3624d-f986-4a24-966c-67defa962e3f@gmail.com
2024-05-29net: ena: Fix redundant device NUMA node overrideShay Agroskin
The driver overrides the NUMA node id of the device regardless of whether it knows its correct value (often setting it to -1 even though the node id is advertised in 'struct device'). This can lead to suboptimal configurations. This patch fixes this behavior and makes the shared memory allocation functions use the NUMA node id advertised by the underlying device. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20240528170912.1204417-1-shayagr@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29ice: check for unregistering correct number of devlink paramsDave Ertman
On module load, the ice driver checks for the lack of a specific PF capability to determine if it should reduce the number of devlink params to register. One situation when this test returns true is when the driver loads in safe mode. The same check is not present on the unload path when devlink params are unregistered. This results in the driver triggering a WARN_ON in the kernel devlink code. The current check and code path uses a reduction in the number of elements reported in the list of params. This is fragile and not good for future maintaining. Change the parameters to be held in two lists, one always registered and one dependent on the check. Add a symmetrical check in the unload path so that the correct parameters are unregistered as well. Fixes: 109eb2917284 ("ice: Add tx_scheduling_layers devlink param") CC: Lukasz Czapnik <lukasz.czapnik@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29ice: fix 200G PHY types to link speed mappingPaul Greenwalt
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support for 200G PHY speeds, but did not include the mapping of 200G PHY types to link speed. As a result the driver is returning UNKNOWN link speed when setting 200G ethtool advertised link modes. To fix this add 200G PHY types to link speed mapping to ice_get_link_speed_based_on_phy_type(). Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29i40e: Fully suspend and resume IO operations in EEH caseThinh Tran
When EEH events occurs, the callback functions in the i40e, which are managed by the EEH driver, will completely suspend and resume all IO operations. - In the PCI error detected callback, replaced i40e_prep_for_reset() with i40e_io_suspend(). The change is to fully suspend all I/O operations - In the PCI error slot reset callback, replaced pci_enable_device_mem() with pci_enable_device(). This change enables both I/O and memory of the device. - In the PCI error resume callback, replaced i40e_handle_reset_warning() with i40e_io_resume(). This change allows the system to resume I/O operations Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Robert Thomas <rob.thomas@ibm.com> Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29i40e: factoring out i40e_suspend/i40e_resumeThinh Tran
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been introduced. These functions were factored out from the existing i40e_suspend() and i40e_resume() respectively. This factoring was done due to concerns about the logic of the I40E_SUSPENSED state, which caused the device to be unable to recover. The functions are now used in the EEH handling for device suspend/resume callbacks. The function i40e_enable_mc_magic_wake() has been moved ahead of i40e_io_suspend() to ensure it is declared before being used. Tested-by: Robert Thomas <rob.thomas@ibm.com> Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29e1000e: move force SMBUS near the end of enable_ulp functionHui Wang
The commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") introduces a regression on PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the ethernet works well after suspend and resume, but after applying the commit, the ethernet couldn't work anymore after the resume and the dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally): [ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx Without the commit, the force SMBUS code will not be executed if "return 0" or "goto out" is executed in the enable_ulp(), and in my case, the "goto out" is executed since FWSM_FW_VALID is set. But after applying the commit, the force SMBUS code will be ran unconditionally. Here move the force SMBUS code back to enable_ulp() and put it immediately ahead of hw->phy.ops.release(hw), this could allow the longest settling time as possible for interface in this function and doesn't change the original code logic. The issue was found on a Lenovo laptop with the ethernet hw as below: 00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a] (rev 20). And this patch is verified (cable plug and unplug, system suspend and resume) on Lenovo laptops with ethernet hw: [8086:550a], [8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and [8086:0dc7]. Fixes: 861e8086029e ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue") Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29net: dsa: microchip: fix RGMII error in KSZ DSA driverTristram Ha
The driver should return RMII interface when XMII is running in RMII mode. Fixes: 0ab7f6bf1675 ("net: dsa: microchip: ksz9477: use common xmii function") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Acked-by: Jerry Ray <jerry.ray@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29net: smc91x: Remove commented out codeThorsten Blum
Remove commented out code Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Link: https://lore.kernel.org/r/20240528160036.404946-2-thorsten.blum@toblux.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29net: dsa: felix: provide own phylink MAC operationsRussell King (Oracle)
Convert felix to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/E1sByYA-00EM0y-Jn@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29net: ethernet: ti: am65-cpsw-nuss: populate netdev of_nodeAlexander Sverdlin
So that of_find_net_device_by_node() can find cpsw-nuss ports and other DSA switches can be stacked downstream. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20240528075954.3608118-3-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29net: ethernet: ti: am65-cpsw-nuss: rename phy_node -> port_npAlexander Sverdlin
Rename phy_node to port_np to better reflect what it actually is, because the new phylink API takes netdev node (or DSA port node), and resolves the phandle internally. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20240528075954.3608118-2-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29netconsole: Do not shutdown dynamic configuration if cmdline is invalidBreno Leitao
If a user provides an invalid netconsole configuration during boot time (e.g., specifying an invalid ethX interface), netconsole will be entirely disabled. Consequently, the user won't be able to create new entries in /sys/kernel/config/netconsole/ as that directory does not exist. Apart from misconfiguration, another issue arises when ethX is loaded as a module and the netconsole= line in the command line points to ethX, resulting in an obvious failure. This renders netconsole unusable, as /sys/kernel/config/netconsole/ will never appear. This is more annoying since users reconfigure (or just toggle) the configuratin later (see commit 5fbd6cdbe304b ("netconsole: Attach cmdline target to dynamic target")) Create /sys/kernel/config/netconsole/ even if the command line arguments are invalid, so, users can create dynamic entries in netconsole. Reported-by: Aijay Adams <aijay@meta.com> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240528084225.3215853-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29net: dsa: lan9303: imply SMSC_PHYAlexander Sverdlin
Both LAN9303 and LAN9354 have internal PHYs on both external ports. Therefore a configuration without SMSC PHY support is non-practical at least and leads to: LAN9303_MDIO 8000f00.mdio:00: Found LAN9303 rev. 1 mdio_bus 8000f00.mdio:00: deferred probe pending: (reason unknown) Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240528073147.3604083-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-29wifi: iwlwifi: mvm: don't read past the mfuart notifcationEmmanuel Grumbach
In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkillIlan Peer
When HW rfkill is toggled to disable the RF, the flow to stop scan is called. When trying to send the command to abort the scan, since HW rfkill is toggled, the command is not sent due to rfkill being asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow continues to wait for scan complete notification and fails. Since it fails, the UID to type mapping is not cleared, and thus a warning is later fired when trying to stop the interface. To fix this, modify the UMAC scan abort flow to force sending the scan abort command even when in rfkill, so stop the FW from accessing the radio etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb1f7bae2c5bdb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: check n_ssids before accessing the ssidsMiri Korenblit
In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe optionAyala Beker
Ensure that the 6 GHz channel is configured with a valid direct BSSID, avoiding any invalid or multicast BSSID addresses. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: handle BA session teardown in RF-killJohannes Berg
When entering RF-kill, mac80211 tears down BA sessions, but due to RF-kill the commands aren't sent to the device. As a result, there can be frames pending on the reorder buffer or perhaps even received while doing so, leading to warnings. Avoid the warnings by doing the BA session teardown normally even in RF-kill, which also requires queue sync. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmdYedidya Benshimol
The BIGTK cipher field was added to the kek_kck_material_cmd but wasn't assigned. Fix that by differentiating between the IGTK/BIGTK keys and assign the ciphers fields accordingly. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: remove stale STA link data during restartBenjamin Berg
If pre-recovery mac80211 tried to disable a link but this disablement failed, then there might be a mismatch between mac80211 assuming the link has been disabled and the driver still having the data around. During recover itself, that is not a problem, but should the link be activated again at a later point, iwlwifi will refuse the activation as it detects the inconsistent state. Solve this corner-case by iterating the station in the restart cleanup handler. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdefShahar S Matityahu
The driver should call iwl_dbg_tlv_free even if debugfs is not defined since ini mode does not depend on debugfs ifdef. Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: set properly mac headerMordechay Goodstein
In the driver we only use skb_put* for adding data to the skb, hence data never moves and skb_reset_mac_haeder would set mac_header to the first time data was added and not to mac80211 header, fix this my using the actual len of bytes added for setting the mac header. Fixes: 3f7a9d577d47 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64Johannes Berg
We don't actually support >64 even for HE devices, so revert back to 64. This fixes an issue where the session is refused because the queue is configured differently from the actual session later. Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookupYedidya Benshimol
After moving from commands to notificaitons in the d3 resume flow, removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes the return of the default value when looking up their version. Returning zero here results in the driver sending the not supported NON_QOS_TX_COUNTER_CMD. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: fix a crash on 7265Emmanuel Grumbach
Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't advertise the command version at all. This made us send a command with a bad size and because of that, the firmware hit a BAD_COMMAND immediately after handling the REDUCE_TX_POWER_CMD command. Fixes: 8f892e225f41 ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512072733.eb20ff5050d3.Ie4fc6f5496cd296fd6ff20d15e98676f28a3cccd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: always set the TWT IE offsetShaul Triebitz
In beacon template version 14, make sure to always set the TWT IE offset before sending the beacon template command, also in the debugfs inject_beacon_ie path. If the TWT IE does not exist, the offset will be set to zero. Fixes: bf0212fd8faa ("wifi: iwlwifi: mvm: add beacon template version 14") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: don't initialize csa_work twiceMiri Korenblit
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif but we removed only from the pre-MLD version of the add_interface callback. Remove it also from the MLD version. Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29net: phy: xilinx-gmii2rgmii: Adopt clock supportVineeth Karumanchi
Add clock support to the gmii_to_rgmii IP. Make clk optional to keep DTB backward compatibility. Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-29net: ethernet: cortina: Restore TSO supportLinus Walleij
An earlier commit deleted the TSO support in the Cortina Gemini driver because the driver was confusing gso_size and MTU, probably because what the Linux kernel calls "gso_size" was called "MTU" in the datasheet. Restore the functionality properly reading the gso_size from the skbuff. Tested with iperf3, running a server on a different machine and client on the device with the cortina gemini ethernet: Connecting to host 192.168.1.2, port 5201 60008000.ethernet-port eth0: segment offloading mss = 05ea len=1c8a 60008000.ethernet-port eth0: segment offloading mss = 05ea len=1c8a 60008000.ethernet-port eth0: segment offloading mss = 05ea len=27da 60008000.ethernet-port eth0: segment offloading mss = 05ea len=0b92 60008000.ethernet-port eth0: segment offloading mss = 05ea len=2bda (...) (The hardware MSS 0x05ea here includes the ethernet headers.) If I disable all segment offloading on the receiving host and dump packets using tcpdump -xx like this: ethtool -K enp2s0 gro off gso off tso off tcpdump -xx -i enp2s0 host 192.168.1.136 I get segmented packages such as this when running iperf3: 23:16:54.024139 IP OpenWrt.lan.59168 > Fecusia.targus-getdata1: Flags [.], seq 1486:2934, ack 1, win 4198, options [nop,nop,TS val 3886192908 ecr 3601341877], length 1448 0x0000: fc34 9701 a0c6 14d6 4da8 3c4f 0800 4500 0x0010: 05dc 16a0 4000 4006 9aa1 c0a8 0188 c0a8 0x0020: 0102 e720 1451 ff25 9822 4c52 29cf 8010 0x0030: 1066 ac8c 0000 0101 080a e7a2 990c d6a8 (...) 0x05c0: 5e49 e109 fe8c 4617 5e18 7a82 7eae d647 0x05d0: e8ee ae64 dc88 c897 3f8a 07a4 3a33 6b1b 0x05e0: 3501 a30f 2758 cc44 4b4a Several such packets often follow after each other verifying the segmentation into 0x05a8 (1448) byte packages also on the reveiving end. As can be seen, the ethernet frames are 0x05ea (1514) in size. Performance with iperf3 before this patch: ~15.5 Mbit/s Performance with iperf3 after this patch: ~175 Mbit/s This was running a 60 second test (twice) the best measurement was 179 Mbit/s. For comparison if I run iperf3 with UDP I get around 1.05 Mbit/s both before and after this patch. While this is a gigabit ethernet interface, the CPU is a cheap D-Link DIR-685 router (based on the ARMv5 Faraday FA526 at ~50 MHz), and the software is not supposed to drive traffic, as the device has a DSA chip, so this kind of numbers can be expected. Fixes: ac631873c9e7 ("net: ethernet: cortina: Drop TSO support") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-29wifi: iwlwifi: move Bz and Gl iwl_dev_info entriesMiri Korenblit
The iwl_dev_info entries for these devices were incorrectly positioned within the array, out of chronological order. Move them arround. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://msgid.link/20240527190228.a75e9a1eb86c.I003980f8ca60a96019657e396e848a07df6b92a4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: move amsdu_size parsing to iwlwifiMiri Korenblit
The code that is parsing the amsdu_size module parameter and mapping it to the corresponding Rx buffer size is common to all opmodes. Move it into a function in iwlwifi, as preparation to a new op mode we are working on. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.a3430d32923d.Iab3c22ef0df685f72f22dafc47021f0dc7bd6fa5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: remove redundant printsMiri Korenblit
Upon start, the different opmodes are currently printing: 1. HW rev, which is already print by iwlwifi 2. The HW name (e.g. "Intel(R) Wi-Fi 7 BE201 320MHz") cleanup things such as the hw rev won't be printed again, the HW name will be printed by iwlwifi instead of each opmode. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://msgid.link/20240527190228.5c589c7abed0.I3590c4ee0ee99d1b207852c32d25d326afb327dd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: fix a wrong commentMiri Korenblit
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.2105ffcf747d.Ic838959b812b6cb4cbb856e8c0bcaad2f46ac71b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: declare band variable in the scopeMiri Korenblit
band is not used outside of the for loop, declare it inside it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.b634d184980a.I9d9e71125f9a77ba4f9a33a7a2ff1e8e78e17767@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: show full firmware ID in debugfsJohannes Berg
The firmware prefix is unused today, but it might still be useful to have some information. Since the prefix will get the intel/ directory in some cases, replace the prefix by the full FW id which has all the information. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.527a1c72996d.If7588b854149d51605031fc9a70a650534351ef4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: add debug data for MPDU countingMiri Korenblit
It is hard to debug issues of EMLSR entry/exit due to low throughput. Add debug data. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.77ef3c2654dc.I1796a3995da2a49dd5102d33766af1ad416dd60b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: use only beacon BSS load for active linksJohannes Berg
For active links, don't take information that may have been received in probe responses, as those are not protected. For inactive links, there may not be a choice. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.6947dc462fa9.I2076961211d6785c8a15b4308e0e87a413148222@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: add support for version 10 of the responder config commandAvraham Stern
This version adds the band to the responder config command. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.af09129ebd74.I9356e2504a4c19961d4856494416ae49b36bfe62@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: add support for version 14 of the range request commandAvraham Stern
This version adds a testing option to send an incorrect SAC in the first NDPA. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.8f36ccb1cc74.I9b76461634f308e75dc3cd016d0b0bce812c6e9d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: modify iwl_mvm_ftm_set_secured_ranging() parametersAvraham Stern
Modify iwl_mvm_ftm_set_secured_ranging() parameters to support multiple versions of the target struct. This is done as preparation for moving to the new range request version. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.56d6aee320b3.I5a52fa93cd791d0229b392a20f076b7cebb110cd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: initiator: move setting the sta_id into a functionAvraham Stern
Move setting the target's sta_id (and related flags) into a function to support different versions of the target struct. This is done as preparation for moving to the new range request version. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.18e3a6a6f1cb.I85e3ee607b3947448532bc16730f8898a11c92b8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-15 11:23:55 +0000