summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2023-12-07wifi: mt76: mt7915: also MT7981 is 3T3R but nss2 on 5 GHz bandStanleyYP Wang
Just like MT7916 also MT7981 can handle 3T3R DBDC frontend and should hence be included in the corresponding conditional expression in the driver. Add it. Fixes: 6bad146d162e ("wifi: mt76: mt7915: add support for MT7981") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7915: fix EEPROM offset of TSSI flag on MT7981StanleyYP Wang
The offset of the TSSI flag on the EEPROM of MT7981 devices was wrong. Set the correct offset instead. Fixes: 6bad146d162e ("wifi: mt76: mt7915: add support for MT7981") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: fix EHT phy mode checkMeiChia Chiu
Add a BSS eht_support check before returning EHT phy mode. Without this patch, there might be an inconsistency where the softmac layer thinks the BSS is in HE mode, while the FW thinks it is in EHT mode. Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add beacon protection support for mt7996Allen Ye
Implement beacon protection feature for mt7996 chipsets, and also do some cleanup on the set key routine. Co-developed-by: Rudra Shahi <rudra.shahi@mediatek.com> Signed-off-by: Rudra Shahi <rudra.shahi@mediatek.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: rework ampdu params settingPeter Chiu
Add sta_rec_ht_uni struct to pass HT ampdu params to firmware. For VHT, HE, and EHT mode, firmware will get the ampdu params by parsing the corresponding capability. Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix alignment of sta info eventStanleyYP Wang
Fix the alignment of struct mt7996_mcu_all_sta_info_event. Fixes: adde3eed4a75 ("wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: switch to mcu command for TX GI reportBenjamin Lin
During runtime, the GI value in the WTBL is not updated in real-time. To obtain the latest results for the TX GI, switch to use an MCU command. Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: use chainmask for power delta calculationAllen Ye
The power gain value is related to total TX path, so change the calculation to use per-phy chainmask. Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add txpower setting supportShayne Chen
Add support for setting txpower from upper layer and configuring per-rate txpower limit table. Co-developed-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: change txpower init to per-phyShayne Chen
Use per-phy structure for maximum txpower value initializing, since each phy may have a different chainmask, which can impact the calculation of power gain. Co-developed-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix rate usage of inband discovery framesMeiChia Chiu
For UBPR and FILS frames, the BSS_CHANGED_BEACON flag will also be set, which causes those frames to use the beacon rate in TX descriptors. Adjust the statement to fix this issue. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: align the format of fixed rate commandPeter Chiu
Use the new fixed rate command format to let the fixed field function work normally. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: handle IEEE80211_RC_SMPS_CHANGEDPeter Chiu
Make mt7996_mcu_set_fixed_field() non-static in order to handle IEEE80211_RC_SMPS_CHANGED in mt7996_mac_sta_rc_work(). Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: set fixed_bw bit in TX descriptor for fixed rate framesHoward Hsu
Always set the fixed_bw bitfield for fixed rate frames to keep it being sent with specific bandwidth. Without this change, the bw of fixed rate frames will still be decided by hardware. Reported-by: Chank Chen <chank.chen@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: adjust WFDMA settings to improve performancePeter Chiu
Refactor and update dma prefetch parts and also split band 1 traffic to PCIe 1 to enhance throughput. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix the size of struct bss_rate_tlvSujuan Chen
Align the format of struct bss_rate_tlv to the firmware. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add beacon duplicate TX mode support for mt7996StanleyYP Wang
For connac3 chipsets, setting of spe_idx is moved from TX descriptor to the fixed rate table. This patch implements the setting to support duplicate TX mode for beacon. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add thermal sensor device supportHoward Hsu
This patch adds support for thermal sensor device, including the following features: - Support to read current chip temperature. - Support to set/get the trigger/restore temperature for thermal service. - Support to read current chip tx cycle. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: connac: add thermal protection support for mt7996Howard Hsu
Implement thermal protection commands and support Linux cooling device control for mt7996 chipsets. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add TX statistics for EHT mode in debugfsHoward Hsu
Add EHT statistics of beamforming feedback and BW320 in debugfs tx_stats command. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add support for variants with auxiliary RX pathShayne Chen
Add support to correctly configure the rx chainmask of variants that have additional auxiliary RX path. e.g., 4T5R. The auxiliary RX path is transparent to driver, but driver needs to correctly configure it in the set channel fw command. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7915: fallback to non-wed mode if platform_get_resource fails ↵Lorenzo Bianconi
in mt7915_mmio_wed_init() mt76 assumes mt7915_mmio_wed_init can fail just after wed driver has been attached running mtk_wed_device_attach(). Fall back to non-wed mode if platform_get_resource fails in mt7915_mmio_wed_init routines. Fixes: eebb70976be5 ("wifi: mt76: mt7915: enable wed for mt7986-wmac chipset") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed rro delete session garbage collectorLorenzo Bianconi
Introduce the capability to clear WED rro session configured in the hw according to the event reported by the MCU firmware Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed reset supportLorenzo Bianconi
Introduce the capability to reset mt7996 chipset if requested by wed driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: move wed reset common code in mt76 moduleLorenzo Bianconi
Move WED reset code shared between mt7915 and mt7996 in common module. This is a preliminary patch to introduce WED reset support for mt7996. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed rx supportBo Jiao
Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996 to offload traffic received from the WLAN nic and transmitted on the LAN one Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: use u16 for val field in mt7996_mcu_set_rro signatureLorenzo Bianconi
This is a preliminary patch to introduce WED rx support for mt7996 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: dma: introduce __mt76_dma_queue_reset utility routineLorenzo Bianconi
This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: add wed tx supportSujuan Chen
Similar to MT7915, enable Wireless Ethernet Ditpatcher for MT7996 to offload traffic received from the LAN nic and transmitted on the WLAN one Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: increase MT_QFLAG_WED_TYPE sizeLorenzo Bianconi
This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: introduce wed pointer in mt76_queueLorenzo Bianconi
Introduce mtk_wed_device pointer in mt76_queue structure in order to configure WED chip. Get rid of dev parameter in Q_READ and Q_WRITE macros. Introduce wed parameter to the following routine signatures: - mt76_init_queue - mt76_init_tx_queue This is a preliminary patch to introduce WED support for mt7996 since mt7996 runs two separate WED chips. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: introduce mt76_queue_is_wed_tx_free utility routineLorenzo Bianconi
This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: move mt76_net_setup_tc in common codeLorenzo Bianconi
This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: move mt76_mmio_wed_offload_{enable,disable} in common codeLorenzo Bianconi
mt76_mmio_wed_offload_enable and mt76_mmio_wed_offload_disable routines will be reused by mt7996 driver for wed support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mmio: move mt76_mmio_wed_{init,release}_rx_buf in common codeLorenzo Bianconi
Move mt76_mmio_wed_init_rx_buf and mt76_mmio_wed_release_rx_buf routines in common code. This is a preliminary patch to introduce WED support for mt7996 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: Remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void *) to (struct mt7615_phy *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: permit to load precal from NVMEM cell for mt7915Christian Marangi
Permit to load precal from NVMEM cell for mt7915. The NVMEM cell must be named "precal" to be correctly loaded. NVMEM cell must already account the correct offset and be placed after the EEPROM as the function expect the data right from the start. Tested-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: permit to use alternative cell name to eeprom NVMEM loadChristian Marangi
Generilize mt76_get_of_eeprom_from_nvmem to use alternative cell name by passing the cell name as an arg and expose it. Rename it to mt76_get_of_data_from_nvmem to better reflect the now more generic usage. This is to permit driver to load additional cell, like precal cell. Tested-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: make mt76_get_of_eeprom static againChristian Marangi
Since mt76_get_of_eeprom is not used by mt7915 anymore, unexport it and make it static again. Also drop offset arg as it's only supported for MTD and was always set to 0, hardcode the MTD functio instead. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: limit support of precal loading for mt7915 to MTD onlyChristian Marangi
Limit support for precal loading for mt7915 only to MTD. Passing data from DT doesn't support offset and NVMEM require a different cell name and doesn't support offset hence only MTD way is actually supported. Rename mt76_get_of_eeprom_from_mtd to mt76_get_of_data_from_mtd as it is now used for a more generic purpose and export it. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: fix typo in mt76_get_of_eeprom_from_nvmem functionChristian Marangi
Fix typo in mt76_get_of_eeprom_from_nvmem where eeprom was misspelled as epprom. Fixes: 5bef3a406c6e ("wifi: mt76: add support for providing eeprom in nvmem cells") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: fix broken precal loading from MTD for mt7915Christian Marangi
Commit 495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data") was fundamentally broken and never worked. The idea (before NVMEM support) was to expand the MTD function and pass an additional offset. For normal EEPROM load the offset would always be 0. For the purpose of precal loading, an offset was passed that was internally the size of EEPROM, since precal data is right after the EEPROM. Problem is that the offset value passed is never handled and is actually overwrite by offset = be32_to_cpup(list); ret = mtd_read(mtd, offset, len, &retlen, eep); resulting in the passed offset value always ingnored. (and even passing garbage data as precal as the start of the EEPROM is getting read) Fix this by adding to the current offset value, the offset from DT to correctly read the piece of data at the requested location. Cc: stable@vger.kernel.org Fixes: 495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7996: fix uninitialized variable in parsing txfreeYi-Chia Hsieh
Fix the uninitialized variable warning in mt7996_mac_tx_free. Fixes: 2461599f835e ("wifi: mt76: mt7996: get tx_retries and tx_failed from txfree") Signed-off-by: Yi-Chia Hsieh <yi-chia.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: mt7921: support 5.9/6GHz channel config in acpiRong Yan
The mtcl table, configured by platform vendor, provides regulatory information for 5.9/6 GHz channels. mt792x should work on corresponding channels supported by mtcl. This patch would parse the settings in mtcl table and apply the result into chip side. Signed-off-by: Rong Yan <rong.yan@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: mt76: add ability to explicitly forbid LED registration with DTRyder Lee
Add ability to explicitly forbid LED registration using DT led\status = "disabled". Tested-by: Alexey D. Filimonov <alexey@filimonic.net> Signed-off-by: Alexey D. Filimonov <alexey@filimonic.net> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-12-07wifi: rtw89: mac: refine SER setting during WiFi CPU power onPing-Ke Shih
Don't enable firmware debug mode to prevent SER flow stuck due to fail to reset payload buffer, and clear HALT_C2H_INT to avoid handling unexpected interrupt at beginning. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231204080751.15354-6-pkshih@realtek.com
2023-12-07wifi: rtw89: 8922a: dump MAC registers when SER occursChia-Yuan Li
To diagnose the reason why firmware or hardware get abnormal, add to dump MAC registers related to counters and interrupt masks. With these values, people can classify problems and check if registers values are unexpected, and then correct them. However, it could possible false alarm because firmware triggers this SER event by wrong conditions that we should correct it at firmware or register settings. In field, SER might happen under special conditions, and very hard to happen again, so dump lots of registers to provide rich information to catch the problem. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231204080751.15354-5-pkshih@realtek.com
2023-12-07wifi: rtw89: 8922a: add SER IMR tablesPing-Ke Shih
To activate SER (system error recovery) in firmware, we have to configure IMR to trigger interrupts, and then SER can check registers to know if it need to reset hardware or notify driver to re-configure whole settings. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231204080751.15354-4-pkshih@realtek.com
2023-12-07wifi: rtw89: fw: extend program counter dump for Wi-Fi 7 chipZong-Zhe Yang
Extend FW program counter dump for Wi-Fi 7 chip. They poll different addresses. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231204080751.15354-3-pkshih@realtek.com
2023-12-07wifi: rtw89: 8922a: configure CRASH_TRIGGER FW featureZong-Zhe Yang
RTL8922A FW supports CRASH_TRIGGER feature from v0.34.30.0. After it, debugfs fw_crash can accept type 1 on RTL8922A to trigger firmware crash and verify L2 recovery. Besides, RTL8922A sync address offset of reserved payload engine. And, SER (system error recovery) tweaks conversion from WCPU address to indirect access address for RTL8922A. The new conversion works for all supported chips. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231204080751.15354-2-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-09-21 23:22:07 +0000