summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2024-02-22Merge tag 'wireless-next-2024-02-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.9 The third "new features" pull request for v6.9. This is a quick followup to send commit 04edb5dc68f4 ("wifi: ath12k: Fix uninitialized use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning introduced in the previous pull request. We also have support for QCA2066 in ath11k, several new features in ath12k and few other changes in drivers. In stack it's mostly cleanup and refactoring. Major changes: ath12k * firmware-2.bin support * support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) * QCN9274: support split-PHY devices * WCN7850: enable Power Save Mode in station mode * WCN7850: P2P support ath11k: * QCA6390 & WCN6855: support 2 concurrent station interfaces * QCA2066 support iwlwifi * mvm: support wider-bandwidth OFDMA * bump firmware API to 90 for BZ/SC devices brcmfmac * DMI nvram filename quirk for ACEPC W5 Pro * tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (75 commits) wifi: wilc1000: revert reset line logic flip wifi: brcmfmac: Add DMI nvram filename quirk for ACEPC W5 Pro wifi: rtlwifi: set initial values for unexpected cases of USB endpoint priority wifi: rtl8xxxu: check vif before using in rtl8xxxu_tx() wifi: rtlwifi: rtl8192cu: Fix TX aggregation wifi: wilc1000: remove AKM suite be32 conversion for external auth request wifi: nl80211: refactor parsing CSA offsets wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in NL80211_CMD_EXTERNAL_AUTH wifi: iwlwifi: load b0 version of ucode for HR1/HR2 wifi: iwlwifi: handle per-phy statistics from fw wifi: iwlwifi: iwl-fh.h: fix kernel-doc issues wifi: iwlwifi: api: fix kernel-doc reference wifi: iwlwifi: mvm: unlock mvm if there is no primary link wifi: iwlwifi: bump FW API to 90 for BZ/SC devices wifi: iwlwifi: mvm: support PHY context version 6 wifi: iwlwifi: mvm: partially support PHY context version 6 wifi: iwlwifi: mvm: support wider-bandwidth OFDMA wifi: cfg80211: use ML element parsing helpers wifi: mac80211: align ieee80211_mle_get_bss_param_ch_cnt() wifi: cfg80211: refactor RNR parsing ... ==================== Link: https://lore.kernel.org/r/20240222105205.CEC54C433F1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22bnxt_en: Use the new VNIC to create ntuple filtersPavan Chebbi
The newly created vnic (BNXT_VNIC_NTUPLE) is ready to be used to create ntuple filters when supported by firmware. All RX rings can be used regardless of the RSS indirection setting on the default VNIC. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Create and setup the additional VNIC for adding ntuple filtersPavan Chebbi
Allocate and setup the additional VNIC for ntuple filters if this new method is supported by the firmware. Even though this VNIC is only used for ntuple filters with direct ring destinations, we still setup the RSS hash to be identical to the default VNIC so that each RX packet will have the correct hash in the RX completion. This VNIC is always at VNIC index BNXT_VNIC_NTUPLE. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Provision for an additional VNIC for ntuple filtersPavan Chebbi
On newer chips that support the ring table index method for ntuple filters, the current scheme of using the same VNIC for both RSS and ntuple filters will not work in all cases. An ntuple filter can only be directed to a destination ring if that destination ring is also in the RSS indirection table. To support ntuple filters with any arbitratry RSS indirection table that may only include a subset of the rings, we need to use a separate VNIC for ntuple filters. This patch provisions the additional VNIC. The next patch will allocate additional VNIC from firmware and set it up. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic indexPavan Chebbi
Replace hard coded 0 index with more meaningful BNXT_VNIC_DEFAULT. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Refactor bnxt_set_features()Pavan Chebbi
Refactor bnxt_set_features() function to have a common function to re-init. We'll need this to reinitialize when ntuple configuration changes. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Add bnxt_get_total_vnics() to calculate number of VNICsVenkat Duvvuru
Refactor the code by adding a new function to calculate the number of required VNICs. This is used in multiple places when reserving or checking resources. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Check additional resources in bnxt_check_rings()Michael Chan
bnxt_check_rings() is called to check if we have enough resource assets to satisfy the new number of ethtool channels. If the asset test fails, the ethtool operation will fail gracefully. Otherwise we will proceed and commit to use the new number of channels. If it fails to allocate any resources, the chip will fail to come up. For completeness, check all possible resources before committing to the new settings. Add the missing ring group and RSS context asset tests in bnxt_check_rings(). Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Improve RSS context reservation infrastructurePavan Chebbi
Add RSS context fields to struct bnxt_hw_rings and struct bnxt_hw_resc. With these, we can now specific the exact number of RSS contexts to reserve and store the reserved value. The original code relies on other resources to infer the number of RSS contexts to reserve and the reserved value is not stored. This improved infrastructure will make the RSS context accounting more complete and is needed by later patches. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Explicitly specify P5 completion rings to reserveMichael Chan
The current code assumes that every RX ring group and every TX ring requires a completion ring on P5_PLUS chips. Now that we have the bnxt_hw_rings structure, add the cp_p5 field so that it can be explicitly specified. This makes the logic more clear. Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22bnxt_en: Refactor ring reservation functionsMichael Chan
The current functions to reserve hardware rings pass in 6 different ring or resource types as parameters. Add a structure bnxt_hw_rings to consolidate all these parameters and pass the structure pointer instead to these functions. Add 2 related helper functions also. This makes the code cleaner and makes it easier to add new resources to be reserved. Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-22Merge tag 'ath-next-20240222' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 We have support for QCA2066 now and also several new features in ath12k. Major changes: ath12k * firmware-2.bin support * support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) * QCN9274: support split-PHY devices * WCN7850: enable Power Save Mode in station mode * WCN7850: P2P support ath11k: * QCA6390 & WCN6855: support 2 concurrent station interfaces * QCA2066 support
2024-02-21net: phy: marvell-88q2xxx: move interrupt configurationDimitri Fedrau
Move interrupt configuration from mv88q222x_revb0_config_init to mv88q2xxx_config_init. Same register and bits are used for the 88q2xxx devices. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Stefan Eichenberger <eichest@gmail.com> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-15-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: remove duplicated assignment of pma_extableDimitri Fedrau
Remove assignment of phydev->pma_extable in mv88q222x_revb0_config_init. It is already done in mv88q2xxx_config_init, just call mv88q2xxx_config_init. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-14-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: cleanup mv88q2xxx_config_initDimitri Fedrau
mv88q2xxx_config_init calls genphy_c45_read_pma which is done by mv88q2xxx_read_status, it calls also mv88q2xxx_config_aneg which is also called by the PHY state machine. Let the PHY state machine handle the phydriver ops in their intendend way. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Stefan Eichenberger <eichest@gmail.com> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-13-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: switch to mv88q2xxx_config_anegDimitri Fedrau
Switch to mv88q2xxx_config_aneg for Marvell 88Q2220 devices and remove the mv88q222x_config_aneg function which is basically a copy of the mv88q2xxx_config_aneg function. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-12-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: make mv88q2xxx_config_aneg genericDimitri Fedrau
Marvell 88Q2xxx devices follow the same scheme, after configuration they need a soft reset. Soft resets differ between devices, so we use the .soft_reset callback instead of creating .config_aneg callbacks for each device. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-11-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: add cable test supportDimitri Fedrau
Add cable test support for Marvell 88Q222x devices. Reported distance granularity is 1m. 1m cable, open: Cable test started for device eth0. Cable test completed for device eth0. Pair A code Open Circuit Pair A, fault length: 1.00m 1m cable, shorted: Cable test started for device eth0. Cable test completed for device eth0. Pair A code Short within Pair Pair A, fault length: 1.00m 6m cable, open: Cable test started for device eth0. Cable test completed for device eth0. Pair A code Open Circuit Pair A, fault length: 6.00m 6m cable, shorted: Cable test started for device eth0. Cable test completed for device eth0. Pair A code Short within Pair Pair A, fault length: 6.00m Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240218075753.18067-10-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: add support for temperature sensorDimitri Fedrau
Marvell 88q2xxx devices have an inbuilt temperature sensor. Add hwmon support for this sensor. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-9-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: add suspend / resume opsDimitri Fedrau
Add suspend/resume ops for Marvell 88Q2xxx devices. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-8-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: add interrupt support for link detectionDimitri Fedrau
Added .config_intr and .handle_interrupt callbacks. Whenever the link goes up or down an interrupt will be triggered. Interrupts are configured separately for 100/1000BASET1. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-7-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHYDimitri Fedrau
Add a driver for the Marvell 88Q2220. This driver allows to detect the link, switch between 100BASE-T1 and 1000BASE-T1 and switch between master and slave mode. Autonegotiation is supported. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-6-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: marvell-88q2xxx: fix typosDimitri Fedrau
Rename mv88q2xxxx_get_sqi to mv88q2xxx_get_sqi and mv88q2xxxx_get_sqi_max to mv88q2xxx_get_sqi_max. Fix linebreaks and use everywhere hexadecimal numbers written with lowercase letters instead of mixing it up. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-5-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: c45: detect 100/1000BASE-T1 linkmode advertisementsDimitri Fedrau
Set 100BT1 and 1000BT1 linkmode advertisement bits to adv_l_mask to enable detection. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> Link: https://lore.kernel.org/r/20240218075753.18067-4-dima.fedrau@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: phy: mxl-gpy: fill in possible_interfaces for GPY21x chipsetRaju Lakkaraju
Fill in the possible_interfaces member. GPY21x phys support the SGMII and 2500base-X interfaces Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Link: https://lore.kernel.org/r/20240216054435.22380-1-Raju.Lakkaraju@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21wifi: wilc1000: revert reset line logic flipAlexis Lothoré
This reverts commit fcf690b0b47494df51d214db5c5a714a400b0257. When using a wilc1000 chip over a spi bus, users can optionally define a reset gpio and a chip enable gpio. The reset line of wilc1000 is active low, so to hold the chip in reset, a low (physical) value must be applied. The corresponding device tree binding documentation was introduced by commit f31ee3c0a555 ("wilc1000: Document enable-gpios and reset-gpios properties") and correctly indicates that the reset line is an active-low signal. The corresponding driver part, brought by commit ec031ac4792c ("wilc1000: Add reset/enable GPIO support to SPI driver") was applying the correct logic. But commit fcf690b0b474 ("wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down") eventually flipped this logic and started misusing the gpiod APIs, applying an inverted logic when powering up/down the chip (for example, setting the reset line to a logic "1" during power up, which in fact asserts the reset line when device tree describes the reset line as GPIO_ACTIVE_LOW). As a consequence, any platform currently using the driver in SPI mode must use a faulty reset line description in device tree, or else chip will be maintained in reset and will not even allow to bring up the chip. Fix reset line usage by inverting back the gpiod APIs usage, setting the reset line to the logic value "0" when powering the chip, and the logic value "1" when powering off the chip. Fixes: fcf690b0b474 ("wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240217-wilc_1000_reset_line-v2-1-b216f433d7d5@bootlin.com
2024-02-21wifi: brcmfmac: Add DMI nvram filename quirk for ACEPC W5 ProHans de Goede
The ACEPC W5 Pro HDMI stick contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: "brcmfmac43455-sdio.$(DEFAULT_STRING)-$(DEFAULT_STRING).txt" as nvram file which is both too generic and messy with the $ symbols in the name. The ACEPC W5 Pro uses the same Ampak AP6255 module as the ACEPC T8 and the nvram for the T8 is already in linux-firmware, so point the new DMI nvram filename quirk to the T8 nvram file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240216213649.251718-1-hdegoede@redhat.com
2024-02-21wifi: rtlwifi: set initial values for unexpected cases of USB endpoint priorityPing-Ke Shih
Map USB endpoints to hardware and AC queues according to number of USB endpoints. However, original only give a warning for unexpected cases but initial values are not given. Then, smatch warns: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:642 _rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuelow'. drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:644 _rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuehi'. drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:649 _rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuehi'. drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:650 _rtl92cu_init_chipn_two_out_ep_priority() error: uninitialized symbol 'valuelow'. The regular selection is high and low queues, so move default (unexpected) case along with that. Compile tested only. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240216033949.34765-1-pkshih@realtek.com
2024-02-21wifi: rtl8xxxu: check vif before using in rtl8xxxu_tx()Ping-Ke Shih
The 'vif' is from tx_info of SKB, and other codes check 'vif' before using, which raises smatch warnings: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5656 rtl8xxxu_tx() warn: variable dereferenced before check 'vif' (see line 5553) Compile tested only. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240216033923.34683-1-pkshih@realtek.com
2024-02-21wifi: rtlwifi: rtl8192cu: Fix TX aggregationBitterblue Smith
rtl8192cu is checking rtl_mac.tids when deciding if it should enable aggregation. This is wrong because rtl_mac.tids is not initialised anywhere. Check rtl_sta_info.tids instead, which is initialised. Also, when enabling aggregation also enable RTS. The vendor driver does this, my router does this. It seems like the thing to do. Also also, it seems right to set the AMPDU density only when enabling aggregation. Also also also, delete the unused member rtl_mac.tids and the unused macros RTL_AGG_ON and RTL_AGG_OFF. Naturally, with working AMPDU the download/upload speeds are better. Before: 59/32 Mbps. After: 68/46 Mbps. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/4e936334-5f81-403f-a495-0628ebfb6903@gmail.com
2024-02-21wifi: wilc1000: remove AKM suite be32 conversion for external auth requestAlexis Lothoré
The driver currently raises the following sparse warning: [...] cfg80211.c:360:42: warning: incorrect type in assignment (different base types) [...] cfg80211.c:360:42: expected unsigned int key_mgmt_suite [...] cfg80211.c:360:42: got restricted __be32 [usertype] CHECK drivers/net/wireless/microchip/wilc1000/netdev.c This conversion was needed because historically the external supplicant (observed with wpa_supplicant) expects AKM suite as big endian in NL80211_CMD_EXTERNAL_AUTH message when the AKM suite is WLAN_AKM_SUITE_SAE. This is not needed anymore: - new (to be released) versions of wpa_supplicant now reads it in host endian _while_ keeping compatibility for older drivers - for new drivers used with current/old wpa_supplicant, this conversion has been added to nl80211 to force big endian when the AKM suite is WLAN_AKM_SUITE_SAE Remove this not-needed-anymore conversion to fix the sparse warning. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308290615.lUTIgqUl-lkp@intel.com/ Tested-on: WILC1000 hwB SPI WILC_WIFI_FW_REL_16_1-13452 Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240215-nl80211_fix_akm_suites_endianness-v1-2-57e902632f9d@bootlin.com
2024-02-21wifi: iwlwifi: load b0 version of ucode for HR1/HR2Mukesh Sisodiya
load b0 version of ucode for both a0 and b0 step of HR RF. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.0166f5d2d5d2.I34c1d46aefd70b34c1c75cea67792bc5ec8bc285@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: handle per-phy statistics from fwMiri Korenblit
In the operational statistics notifications (both old and new API) the driver receives the statistics per phy. currently this statistics wasn't handled because they wasn't needed. Now the channel_load_by_us parameter in these statistics will be used for the link grading calculation (implemented in another patch), so store its value in phy_ctxt. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240218194912.e84f975b69ee.Ibbc7817135827e45adaaa47b796be165f9f1ca48@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: iwl-fh.h: fix kernel-doc issuesJohannes Berg
Clean up kernel-doc in iwl-fh.h. In one case, rename the (otherwise unused) struct member to have the correct name. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.4a342ac06f0b.I604ea964a094b43df0ab29b06231c2f42d6bd79b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: api: fix kernel-doc referenceJohannes Berg
This is for iwl_tas_config_cmd_v4, not iwl_tas_config_cmd_v3. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.5475d49bce86.I640a12bc799612e82c3e7a4d628bbb7760511297@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: mvm: unlock mvm if there is no primary linkBenjamin Berg
At that point in the code mvm->mutex has already been taken, so jump to out_noreset in order to unlock before returning the error. Fixes: 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.21de6e68d9e5.I3c0ebe577dec6b26ab6b4eac48035d6f35a8b0f8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: bump FW API to 90 for BZ/SC devicesMiri Korenblit
Start supporting API version 90 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.21cf0b641f12.I2f9196191f1ea78e96e92f9db8ecb3cc9bbfd9b3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: mvm: support PHY context version 6Johannes Berg
Fill the new puncture mask in the PHY context command if supported. In this case, also don't send it in the link context command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.16d9f5fc41df.I9eeb55787d8483f820f5790e8874761f598da314@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: mvm: partially support PHY context version 6Johannes Berg
The version 6 command adds the puncture mask to the PHY context and is otherwise the same. Support that in the API definitions, but don't fill it yet. While at it, also mark the field as removed from the link context command since it moved from there to PHY context. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.2156fca5b1a5.I57f47f26ec0d96ecfb1192039f72b1c6d4e8a357@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: mvm: support wider-bandwidth OFDMAJohannes Berg
To support wider-bandwidth OFDMA we need to configure the PHY context in the firmware, which will in turn configure the DSP accordingly. Pass the relevant information down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.ca666ede5dd6.I357972823d20e9045e2c97dbb7ac24fe9f5a6e41@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: mac80211_hwsim: add support for switch_vif_chanctx callbackAditya Kumar Singh
Currently switch_vif_chanctx mac80211 callback is not supported for MLO. Add it. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240216144621.514385-3-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: mac80211: check beacon countdown is complete on per link basisAditya Kumar Singh
Currently, function to check if beacon countdown is complete uses deflink to fetch the beacon and check the counter. However, with MLO, there is a need to check the counter for the beacon in a particular link. Add support to use link_id in order to fetch the beacon from a particular link data. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21Revert "net: bcmgenet: Ensure MDIO unregistration has clocks enabled"Florian Fainelli
This reverts commit 1b5ea7ffb7a3bdfffb4b7f40ce0d20a3372ee405 ("net: bcmgenet: Ensure MDIO unregistration has clocks enabled"). This is no longer necessary now that the MDIO bus controller has a clock that it can manage around the I/O accesses. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21net: bcmgenet: Pass "main" clock down to the MDIO driverFlorian Fainelli
GENET has historically had to create a MDIO platform device for its controller and pass some auxiliary data to it, like a MDIO completion callback. Now we also pass the "main" clock to allow for the MDIO bus controller to manage that clock adequately around I/O accesses. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21net: mdio: mdio-bcm-unimac: Manage clock around I/O accessesFlorian Fainelli
Up until now we have managed not to have the mdio-bcm-unimac manage its clock except during probe and suspend/resume. This works most of the time, except where it does not. With a fully modular build, we can get into a situation whereby the GENET driver is fully registered, and so is the mdio-bcm-unimac driver, however the Ethernet PHY driver is not yet, because it depends on a resource that is not yet available (e.g.: GPIO provider). In that state, the network device is not usable yet, and so to conserve power, the GENET driver will have turned off its "main" clock which feeds its MDIO controller. When the PHY driver finally probes however, we make an access to the PHY registers to e.g.: disable interrupts, and this causes a bus error within the MDIO controller space because the MDIO controller clock(s) are turned off. To remedy that, we manage the clock around all of the I/O accesses to the hardware which are done exclusively during read, write and clock divider configuration. This ensures that the register space is accessible, and this also ensures that there are not unnecessarily elevated reference counts keeping the clocks active when the network device is administratively turned off. It would be the case with the previous way of managing the clock. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21Merge tag 'wireless-next-2024-02-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.9 The second "new features" pull request for v6.9. Lots of iwlwifi and stack changes this time. And naturally smaller changes to other drivers. We also twice merged wireless into wireless-next to avoid conflicts between the trees. Major changes: stack * mac80211: negotiated TTLM request support * SPP A-MSDU support * mac80211: wider bandwidth OFDMA config support iwlwifi * kunit tests * bump FW API to 89 for AX/BZ/SC devices * enable SPP A-MSDUs * support for new devices ath12k * refactoring in preparation for Multi-Link Operation (MLO) support * 1024 Block Ack window size support * provide firmware wmi logs via a trace event ath11k * 36 bit DMA mask support * support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP) rtl8xxxu * TP-Link TL-WN823N V2 support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21net/dummy: Move stats allocation to coreBreno Leitao
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Move dummy driver to leverage the core allocation. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21tg3: simplify tg3_phy_autoneg_cfgHeiner Kallweit
Make use of ethtool_adv_to_mmd_eee_adv_t() to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21tg3: copy only needed fields from userspace-provided EEE dataHeiner Kallweit
The current code overwrites fields in tp->eee with unchecked data from edata, e.g. the bitmap with supported modes. ethtool properly returns the received data from get_eee() call, but we have no guarantee that other users of the ioctl set_eee() interface behave properly too. Therefore copy only fields which are actually needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21net: hso: constify the struct device_type usageRicardo B. Marliere
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the hso_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-10 13:08:19 +0000