| Age | Commit message (Collapse) | Author |
|---|
|
Add support to ethtool phylink functions:
- get/set settings like speed, duplex etc
- get/set the wake-on-lan (WOL)
- get/set the energy-efficient ethernet (EEE)
- get/set the pause
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Migrate phy support from phylib to phylink.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create separate Link Speed Duplex (LSD) update state function from
lan743x_sgmii_config () to use as subroutine.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create separate PCS power reset function from lan743x_sgmii_config () to use
as subroutine.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phylink
The function allows for the configuration of a fixed link state for a given
phylink instance. This addition is particularly useful for network devices that
operate with a fixed link configuration, where the link parameters do not change
dynamically. By using `phylink_set_fixed_link()`, drivers can easily set up
the fixed link state during initialization or configuration changes.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
error code register
Probably due to a copy/paste error rkcanfd_handle_error_int_reg_ec()
checks twice if the RKCANFD_REG_ERROR_CODE_TX_ACK_EOF bit is set in
reg_ec.
Keep the correct check for RKCANFD_REG_ERROR_CODE_TX_ACK_EOF and
remove the superfluous one.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://patch.msgid.link/9a46d10d-e4e3-40a5-8fb6-f4637959f124@stanley.mountain
Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller")
Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-2-5ce385b5ab10@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Rework the delay calculation to only require a single 64-bit division.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[mkl: port to on-top of existing 32-bit division fix]
Link: https://patch.msgid.link/20240911-can-rockchip_canfd-fixes-v1-1-5ce385b5ab10@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
On the Microchip SAMA7G54 MPU the IR_TSW (timestamp wraparound) fires
at about 1 Hz, but the driver doesn't care about it. Add it to the
list of interrupts to disable in m_can_chip_config to reduce unneeded
wakeups.
Link: https://patch.msgid.link/DM8PR14MB5221D9DD3A7F2130EF161AF7EF9E2@DM8PR14MB5221.namprd14.prod.outlook.com
Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com>
Link: https://patch.msgid.link/20240911-can-m_can-mask-timestamp-wraparound-irq-v1-1-0155b70dc827@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The CAN-USB/3-FD was missing on the list of supported devices.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20240910170236.2287637-1-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all can drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909072742.381003-2-u.kleine-koenig@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-09-09 (ice, igb)
This series contains updates to ice and igb drivers.
Martyna moves LLDP rule removal to the proper uninitialization function
for ice.
Jake corrects accounting logic for FWD_TO_VSI_LIST switch filters on
ice.
Przemek removes incorrect, explicit calls to pci_disable_device() for
ice.
Michal Schmidt stops incorrect use of VSI list for VLAN use on ice.
Sriram Yagnaraman adjusts igb_xdp_ring_update_tail() to be called under
Tx lock on igb.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Always call igb_xdp_ring_update_tail() under Tx lock
ice: fix VSI lists confusion when adding VLANs
ice: stop calling pci_disable_device() as we use pcim
ice: fix accounting for filters shared by multiple VSIs
ice: Fix lldp packets dropping after changing the number of channels
====================
Link: https://patch.msgid.link/20240909203842.3109822-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2024-09-09
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2024-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix bridge mode operations when there are no VFs
net/mlx5: Verify support for scheduling element and TSAR type
net/mlx5: Add missing masks and QoS bit masks for scheduling elements
net/mlx5: Explicitly set scheduling element and TSAR type
net/mlx5e: Add missing link mode to ptys2ext_ethtool_map
net/mlx5e: Add missing link modes to ptys2ethtool_map
net/mlx5: Update the list of the PCI supported devices
====================
Link: https://patch.msgid.link/20240909194505.69715-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice: support devlink subfunction
Michal Swiatkowski says:
Currently ice driver does not allow creating more than one networking
device per physical function. The only way to have more hardware backed
netdev is to use SR-IOV.
Following patchset adds support for devlink port API. For each new
pcisf type port, driver allocates new VSI, configures all resources
needed, including dynamically MSIX vectors, program rules and registers
new netdev.
This series supports only one Tx/Rx queue pair per subfunction.
Example commands:
devlink port add pci/0000:31:00.1 flavour pcisf pfnum 1 sfnum 1000
devlink port function set pci/0000:31:00.1/1 hw_addr 00:00:00:00:03:14
devlink port function set pci/0000:31:00.1/1 state active
devlink port function del pci/0000:31:00.1/1
Make the port representor and eswitch code generic to support
subfunction representor type.
VSI configuration is slightly different between VF and SF. It needs to
be reflected in the code.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: subfunction activation and base devlink ops
ice: basic support for VLAN in subfunctions
ice: support subfunction devlink Tx topology
ice: implement netdevice ops for SF representor
ice: check if SF is ready in ethtool ops
ice: don't set target VSI for subfunction
ice: create port representor for SF
ice: make representor code generic
ice: implement netdev for subfunction
ice: base subfunction aux driver
ice: allocate devlink for subfunction
ice: treat subfunction VSI the same as PF VSI
ice: add basic devlink subfunctions support
ice: export ice ndo_ops functions
ice: add new VSI type for subfunctions
====================
Link: https://patch.msgid.link/20240906223010.2194591-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2024-08-29
HW-Managed Flow Steering in mlx5 driver
Yevgeny Kliteynik says:
=======================
1. Overview
-----------
ConnectX devices support packet matching, modification, and redirection.
This functionality is referred as Flow Steering.
To configure a steering rule, the rule is written to the device-owned
memory. This memory is accessed and cached by the device when processing
a packet.
The first implementation of Flow Steering was done in FW, and it is
referred in the mlx5 driver as Device-Managed Flow Steering (DMFS).
Later we introduced SW-managed Flow Steering (SWS or SMFS), where the
driver is writing directly to the device's configuration memory (ICM)
through RC QP using RDMA operations (RDMA-read and RDAM-write), thus
achieving higher rates of rule insertion/deletion.
Now we introduce a new flow steering implementation: HW-Managed Flow
Steering (HWS or HMFS).
In this new approach, the driver is configuring steering rules directly
to the HW using the WQs with a special new type of WQE. This way we can
reach higher rule insertion/deletion rate with much lower CPU utilization
compared to SWS.
The key benefits of HWS as opposed to SWS:
+ HW manages the steering decision tree
- HW calculates CRC for each entry
- HW handles tree hash collisions
- HW & FW manage objects refcount
+ HW keeps cache coherency:
- HW provides tree access locking and synchronization
- HW provides notification on completion
+ Insertion rate isn’t affected by background traffic
- Dedicated HW components that handle insertion
2. Performance
--------------
Measuring Connection Tracking with simple IPv4 flows w/o NAT, we
are able to get ~5 times more flows offloaded per second using HWS.
3. Configuration
----------------
The enablement of HWS mode in eswitch manager is done using the same
devlink param that is already used for switching between FW-managed
steering and SW-managed steering modes:
# devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs
4. Upstream Submission
----------------------
HWS support consists of 3 main components:
+ Steering:
- The lower layer that exposes HWS API to upper layers and implements
all the management of flow steering building blocks
+ FS-Core
- Implementation of fs_hws layer to enable fs_core to use HWS instead
of FW or SW steering
- Create HW steering action pools to utilize the ability of HWS to
share steering actions among different rules
- Add support for configuring HWS mode through devlink command,
similar to configuring SWS mode
+ Connection Tracking
- Implementation of CT support for HW steering
- Hooks up the CT ops for the new steering mode and uses the HWS API
to implement connection tracking.
Because of the large number of patches, we need to perform the submission
in several separate patch series. This series is the first submission that
lays the ground work for the next submissions, where an actual user of HWS
will be added.
5. Patches in this series
-------------------------
This patch series contains implementation of the first bullet from above.
=======================
* tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: HWS, added API and enabled HWS support
net/mlx5: HWS, added send engine and context handling
net/mlx5: HWS, added debug dump and internal headers
net/mlx5: HWS, added backward-compatible API handling
net/mlx5: HWS, added memory management handling
net/mlx5: HWS, added vport handling
net/mlx5: HWS, added modify header pattern and args handling
net/mlx5: HWS, added FW commands handling
net/mlx5: HWS, added matchers functionality
net/mlx5: HWS, added definers handling
net/mlx5: HWS, added rules handling
net/mlx5: HWS, added tables handling
net/mlx5: HWS, added actions handling
net/mlx5: Added missing definitions in preparation for HW Steering
net/mlx5: Added missing mlx5_ifc definition for HW Steering
====================
Link: https://patch.msgid.link/20240909181250.41596-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The name field of struct bnxt_irq is written using snprintf in
bnxt_setup_msix(). Make the field large enough to fit the maximal
formatted string to prevent truncation. Truncated IRQ names are
less meaningful to the user. For example, "enp4s0f0np0-TxRx-0"
gets truncated to "enp4s0f0np0-TxRx-" with the existing code.
Make sure we have space for the extra characters added to the IRQ
names:
- the characters introduced by the static format string: hyphens
- the maximal static substituted ring type string: "TxRx"
- the maximum length of an integer formatted as a string, even
though reasonable ring numbers would never be as long as this.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909202737.93852-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_check_rings() is called to ensure that we have the hardware ring
resources before committing to reinitialize with the new number of
rings. MSIX vectors are never checked at this point, because up
until recently we must first disable MSIX before we can allocate the
new set of MSIX vectors.
Now that we support dynamic MSIX allocation, check to make sure we
can dynamically allocate the new MSIX vectors as the last step in
bnxt_check_rings() if dynamic MSIX is supported.
For example, the IOMMU group may limit the number of MSIX vectors
for the device. With this patch, the ring change will fail more
gracefully when there is not enough MSIX vectors.
It is also better to move bnxt_check_rings() to be called as the last
step when changing ethtool rings.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909202737.93852-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If RocE is supported on the device, set the number of RoCE MSIX vectors
to the number of online CPUs + 1 and capped at these maximums:
VF: 2
NPAR: 5
PF: 64
For the PF, the maximum is now increased from the previous value
of 9 to get better performance for kernel applications.
Remove the unnecessary check for BNXT_FLAG_ROCE_CAP.
bnxt_set_dflt_ulp_msix() will only be called if the flag is set.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909202737.93852-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The partial rx checksum feature computes a checksum over the entire
packet, regardless of the L3 protocol. Remove the check for IPv4.
Additionally, testing with csum.py (from kselftests) shows no anomalies
with 64-byte packets, so we can remove that check as well.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909161016.1149119-5-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When it is supported by hardware, we enable receive checksum offload
unconditionally. Update features to reflect this.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240909161016.1149119-4-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Partial tx chechsumming is completely generic and does not depend on the
L3/L4 protocol. Signal this to the net subsystem by enabling the
more-generic offload feature (instead of restricting ourselves to
TCP/UDP over IPv4 checksumming only like is necessary with full
checksumming).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909161016.1149119-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These variables are set but never used. Remove them.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20240909161016.1149119-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in the struct field tx_underun, rename
it to tx_underrun.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909134612.63912-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in the struct field tx_underun, rename
it to tx_underrun.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20240909140021.64884-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethtool --show-mm can get real-time state of FPE.
fpe_irq_status logs should keep quiet.
tc-taprio can always query driver state, delete unbalanced logs.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/39943d7967f291674a97ef0572878aca273087e9.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tc-taprio can select whether traffic classes are express or preemptible.
0) tc qdisc add dev eth1 parent root handle 100 taprio \
num_tc 4 \
map 0 1 2 3 2 2 2 2 2 2 2 2 2 2 2 3 \
queues 1@0 1@1 1@2 1@3 \
base-time 1000000000 \
sched-entry S 03 10000000 \
sched-entry S 0e 10000000 \
flags 0x2 fp P E E E
1) After some traffic tests, MAC merge layer statistics are all good.
Local device:
[ {
"ifname": "eth1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 0,
"MACMergeFragCountRx": 0,
"MACMergeFragCountTx": 17837,
"MACMergeHoldCount": 18639
}
} ]
Remote device:
[ {
"ifname": "end1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 17189,
"MACMergeFragCountRx": 17837,
"MACMergeFragCountTx": 0,
"MACMergeHoldCount": 0
}
} ]
Tested on DWMAC CORE 5.10a
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/0d21ae356fb3cab77337527e87d46748a4852055.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tc-mqprio can select whether traffic classes are express or preemptible.
After some traffic tests, MAC merge layer statistics are all good.
Local device:
ethtool --include-statistics --json --show-mm eth1
[ {
"ifname": "eth1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 0,
"MACMergeFragCountRx": 0,
"MACMergeFragCountTx": 35105,
"MACMergeHoldCount": 0
}
} ]
Remote device:
ethtool --include-statistics --json --show-mm end1
[ {
"ifname": "end1",
"pmac-enabled": true,
"tx-enabled": true,
"tx-active": true,
"tx-min-frag-size": 60,
"rx-min-frag-size": 60,
"verify-enabled": true,
"verify-time": 100,
"max-verify-time": 128,
"verify-status": "SUCCEEDED",
"statistics": {
"MACMergeFrameAssErrorCount": 0,
"MACMergeFrameSmdErrorCount": 0,
"MACMergeFrameAssOkCount": 35105,
"MACMergeFragCountRx": 35105,
"MACMergeFragCountTx": 0,
"MACMergeHoldCount": 0
}
} ]
Tested on DWMAC CORE 5.10a
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/592965ea93ed8240f0a1b8f6f8ebb8914f69419b.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement ethtool --show-mm and --set-mm callbacks.
NIC up/down, link up/down, suspend/resume, kselftest-ethtool_mm,
all tested okay.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/06ed409314fe0ee37b78b800922f2c0cce762532.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop driver defined stmmac_fpe_state, and switch to common
ethtool_mm_verify_status for local TX verification status.
Local side and remote side verification processes are completely
independent. There is no reason at all to keep a local state and
a remote state.
Add a spinlock to avoid races among ISR, timer, link update
and register configuration.
This patch is based on Vladimir Oltean's proposal.
Vladimir Oltean says:
====================
In the INITIAL state, the timer sends MPACKET_VERIFY. Eventually the
stmmac_fpe_event_status() IRQ fires and advances the state to VERIFYING,
then rearms the timer after verify_time ms. If a subsequent IRQ comes in
and modifies the state to SUCCEEDED after getting MPACKET_RESPONSE, the
timer sees this. It must enable the EFPE bit now. Otherwise, it
decrements the verify_limit counter and tries again. Eventually it
moves the status to FAILED, from which the IRQ cannot move it anywhere
else, except for another stmmac_fpe_apply() call.
====================
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/151f86c8428eba967039718c6bf90a7d841e703b.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethtool --set-mm can trigger FPE verification process by calling
stmmac_fpe_send_mpacket, stmmac_fpe_handshake should be gone.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/42018b1a15eb3ced567fd6a73798c7cd4e08799a.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By moving the fpe_cfg field to the stmmac_priv data, stmmac_fpe_cfg
becomes platform-data eventually, instead of a run-time config.
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://patch.msgid.link/d9b3d7ecb308c5e39778a4c8ae9df288a2754379.1725631883.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe() function is only used for DP83822 and DP83826 PHY,
leaving the private data pointer uninitialized for the DP83825 models
which causes a NULL pointer dereference in the recently introduced/changed
functions dp8382x_config_init() and dp83822_set_wol().
Add the dp8382x_probe() function, so all PHY models will have a valid
private data pointer to fix this issue and also prevent similar issues
in the future.
Fixes: 9ef9ecfa9e9f ("net: phy: dp8382x: keep WOL settings across suspends")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/66w.ZbGt.65Ljx42yHo5.1csjxu@seznam.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now, the premapped mode encounters some problem.
http://lore.kernel.org/all/8b20cc28-45a9-4643-8e87-ba164a540c0a@oracle.com
So we disable the premapped mode by default.
We can re-enable it in the future.
Fixes: f9dac92ba908 ("virtio_ring: enable premapped mode whatever use_dma_api")
Reported-by: "Si-Wei Liu" <si-wei.liu@oracle.com>
Closes: http://lore.kernel.org/all/8b20cc28-45a9-4643-8e87-ba164a540c0a@oracle.com
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Takero Funaki <flintglass@gmail.com>
Link: https://patch.msgid.link/20240906123137.108741-4-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit a377ae542d8d0a20a3173da3bbba72e045bea7a9.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Takero Funaki <flintglass@gmail.com>
Link: https://patch.msgid.link/20240906123137.108741-3-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit defd28aa5acb0fd7c15adc6bc40a8ac277d04dea.
Recover the code to disable premapped mode.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Takero Funaki <flintglass@gmail.com>
Link: https://patch.msgid.link/20240906123137.108741-2-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To update with the latest fixes.
|
|
Currently, the driver only enables RX interrupt to handle RX
packets and TX resources. Sometimes there is not RX traffic,
so the TX resource needs to wait for RX interrupt to free.
This situation will toggle the TX timeout watchdog when the MAC
TX ring has no more resources to transmit packets.
Therefore, enable TX interrupt to release TX resources at any time.
When I am verifying iperf3 over UDP, the network hangs.
Like the log below.
root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0
Connecting to host 192.168.100.100, port 5201
[ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201
[ ID] Interval Transfer Bandwidth Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%)
[ 4] Sent 20 datagrams
iperf3: error - the server has terminated
The network topology is FTGMAC connects directly to a PC.
UDP does not need to wait for ACK, unlike TCP.
Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead
of waiting for the RX interrupt.
Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Was slightly misleading before, because printed is pointer to fwnode,
not to phy device, as placement in message suggested. Include header
for dev_dbg() declaration while at it.
Output before:
[ +0.001247] mdio_bus f802c000.ethernet-ffffffff: registered phy 2612f00a fwnode at address 3
Output after:
[ +0.001229] mdio_bus f802c000.ethernet-ffffffff: registered phy fwnode /ahb/apb/ethernet@f802c000/ethernet-phy@3 at address 3
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://patch.msgid.link/20240906062256.11289-1-ada@thorsis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.
Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds support to show firmware version information for both stored and
running firmware versions. The version and commit is displayed separately
to aid monitoring tools which only care about the version.
Example output:
# devlink dev info
pci/0000:01:00.0:
driver fbnic
serial_number 88-25-08-ff-ff-01-50-92
versions:
running:
fw 24.07.15-017
fw.commit h999784ae9df0
fw.bootloader 24.07.10-000
fw.bootloader.commit hfef3ac835ce7
stored:
fw 24.07.24-002
fw.commit hc9d14a68b3f2
fw.bootloader 24.07.22-000
fw.bootloader.commit h922f8493eb96
fw.undi 01.00.03-000
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240905233820.1713043-1-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that we store everything in the fdma structs, refactor
lan966x_fdma_reload() to store and restore the entire struct.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The library provides helpers for a number of DCB and DB operations. Use
these throughout the code and remove the old ones.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This variable is used in the tx path to determine the last used DCB. The
library has the variable last_dcb for the exact same purpose. Ditch the
last_in_use variable throughout.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the fdma_dcb_add() function to add DCB's in the tx path. This gets
rid of the open-coding of nextptr and dataptr handling and leaves it to
the library.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: tx->dma, tx->dcbs and tx->curr_entry
with the equivalents from the FDMA struct.
- add lan966x_fdma_tx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the fdma_dcb_add() function to add DCB's in the rx path. This gets
rid of the open-coding of nextptr and dataptr handling and the functions
for adding DCB's.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: rx->dma, rx->dcbs and rx->last_entry
with the equivalents from the FDMA struct.
- make use of fdma->db_size for rx buffer size.
- add lan966x_fdma_rx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace the old rx and tx variables: channel_id, FDMA_DCB_MAX,
FDMA_RX_DCB_MAX_DBS, FDMA_TX_DCB_MAX_DBS, dcb_index and db_index with
the equivalents from the FDMA rx and tx structs. These variables are not
entangled in any buffer allocation and can therefore be replaced in
advance.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Include and use the new FDMA header, which now provides the required
masks and bit offsets for operating on the DCB's and DB's.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
