summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-08-03net: hns3: Refine the MSIX allocation for PFJian Shen
The offset of msix number for roce is different between different revision id. We should get it from firmware, instead of a fix value. This patch refines the msix allocation, make it compatible. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: hns3: Fix MSIX allocation issue for VFJian Shen
The msix number for vf is different, depends on the max vf number. Futherly if the vf supports roce, the offset of msix is not fixed. It's incorrect to fix the msix number to 33. This patch fixes it by querying the msix number from firmware, and adjusting it with roce support. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03bnxt_en: combine 'else if' and 'else' into single branchYueHaibing
The else-if branch and else branch set mac_ok to true similarly, so combine the two into single else branch. Also add comments to explain the two conditions, which from Michael Chan and Vasundhara Volam. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxHerbert Xu
Merge mainline to pick up c7513c2a2714 ("crypto/arm64: aes-ce-gcm - add missing kernel_neon_begin/end pair").
2018-08-02RDMA/netdev: Use priv_destructor for netdev cleanupJason Gunthorpe
Now that the unregister_netdev flow for IPoIB no longer relies on external code we can now introduce the use of priv_destructor and needs_free_netdev. The rdma_netdev flow is switched to use the netdev common priv_destructor instead of the special free_rdma_netdev and the IPOIB ULP adjusted: - priv_destructor needs to switch to point to the ULP's destructor which will then call the rdma_ndev's in the right order - We need to be careful around the error unwind of register_netdev as it sometimes calls priv_destructor on failure - ULPs need to use ndo_init/uninit to ensure proper ordering of failures around register_netdev Switching to priv_destructor is a necessary pre-requisite to using the rtnl new_link mechanism. The VNIC user for rdma_netdev should also be revised, but that is left for another patch. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Denis Drozdov <denisd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-08-02xen-netback: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02drivers: net: lmc: fix case value for target abort errorColin Ian King
Current value for a target abort error is 0x010, however, this value should in fact be 0x002. As it stands, the range of error is 0..7 so it is currently never being detected. This bug has been in the driver since the early 2.6.12 days (or before). Detected by CoverityScan, CID#744290 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: hns: remove redundant variables 'max_frm' and 'tmp_mac_key'YueHaibing
Variables 'max_frm' and 'tmp_mac_key' are being assigned, but are never used,hence they are redundant and can be removed. fix fllowing warning: drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:461:6: warning: variable 'max_frm' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:1685:31: warning: variable 'tmp_mac_key' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:1855:41: warning: variable 'tmp_mac_key' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Add pm support to Broadcom iProc mdio mux driverArun Parameswaran
Add support for suspend and resume to the Broadcom iProc mdio mux driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Add support to configure clock in Broadcom iProc mdio muxArun Parameswaran
Add support to configure the internal rate adjust register based on the core clock supplied through device tree in the Broadcom iProc mdio mux. The operating frequency of the mdio mux block is 11MHz. This is derrived by dividing the clock to the mdio mux with the rate adjust register. In some SoC's the default values of the rate adjust register do not yield 11MHz. These SoC's are required to specify the clock via the device tree for proper operation. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Use devm api for mdio bus allocation in bcm iproc mdio muxArun Parameswaran
Use devm_mdiobus_alloc() instead of mdiobus_alloc() in the Broadcom iProc mdio mux driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Disable external master access in bcm mdio mux driverArun Parameswaran
Configure the scan control register in the Broadcom iProc mdio mux driver to disable access to external master. In some SoC's, the scan control register defaults to an incorrect value. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Fix the register offsets in Broadcom iProc mdio mux driverArun Parameswaran
Modify the register offsets in the Broadcom iProc mdio mux to start from the top of the register address space. Earlier, the base address pointed to the end of the block's register space. The base address will now point to the start of the mdio's address space. The offsets have been fixed to match this. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02qtnfmac: implement basic WoWLAN supportSergey Matyukevich
This patch implements basic WoWLAN support in qtnfmac driver, including processing of WoWLAN features reported by firmware and implementation of cfg80211 suspend/resume/wakeup callbacks. Currently the following WoWLAN triggers are supported: disconnect, magic packet, custom pattern packet. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: load firmware from mediatek subdirStanislaw Gruszka
Firmware blob will be located in mediatek subdirectory. Add "u" suffix to indicate this is USB device firmware. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: disable HW before probeStanislaw Gruszka
Disable HW before probe, otherwise after reboot we will fail to initialize MCU. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: Kconfig and Makefile for mt76x0 driverStanislaw Gruszka
Add Kconfig and Makefiles for mt76x0 driver. Now the driver can be build. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add more statesStanislaw Gruszka
Add states needed for mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: main fileStanislaw Gruszka
Add main file of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: dma and tx filesStanislaw Gruszka
Add dma and tx files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: trace and debugfs filesStanislaw Gruszka
Add trace and debugfs files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: eeprom filesStanislaw Gruszka
Add eeprom files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: init filesStanislaw Gruszka
Add init files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: phy filesStanislaw Gruszka
Add phy files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: mcu filesStanislaw Gruszka
Add mcu files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: usb filesStanislaw Gruszka
Add usb files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: mac filesStanislaw Gruszka
Add mac files of mt76x0 driver. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x0: core filesStanislaw Gruszka
Core files of mt76x0 driver. mt76x0 driver adds support for Mediatek MT7610U based USB Wi-Fi dongles. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add driver code for MT76x2u based devicesLorenzo Bianconi
MT76x2u is a 2x2 USB 802.11ac chipset by MediaTek. This driver currently support station mode Tested-by: <cug_yangyuancong@hotmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add usb support to mt76 layerLorenzo Bianconi
This will be used by drivers for MT76x2u based devices Tested-by: <cug_yangyuancong@hotmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: move mt76x2_debugfs in mt76-common moduleLorenzo Bianconi
Move mt76x2_debugfs code in mt76-common module since it is shared between mt76x2 and mt76x2u Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_phy_common to mt76x2-common moduleLorenzo Bianconi
Move phy related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_common to mt76x2-common moduleLorenzo Bianconi
Move core related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_init_common to mt76x2-common moduleLorenzo Bianconi
Move init related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_mac_common to mt76x2-common moduleLorenzo Bianconi
Move mac related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: add mt76x2_tx_common to mt76x2-common moduleLorenzo Bianconi
Move tx related code shared between mt76x2 and mt76x2u in mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: introduce mt76x2-common moduleLorenzo Bianconi
In order to remove usb dependency from pcie code, add mt76x2-common as a container of shared code between mt76x2 and mt76x2u. Add eeprom code to mt76x2-common module Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: introduce tx_queue_skb function pointer in mt76_bus_opsLorenzo Bianconi
Add tx_queue_skb function pointer in mt76_bus_ops since mt76x2u based devices do not map mt76x2_txwi on dma buffers and it is not possible to reuse mt76_dma_tx_queue_skb() routine to enqueue tx frames to hw buffers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: rename mt76_tx_queue_skb in mt76_dma_tx_queue_skbLorenzo Bianconi
Move mt76_dma_tx_queue_skb routine in dma.c. Remove static qualifier from mt76_get_txwi definition Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: add buffer len to mt76x2_mac_write_txwi signatureLorenzo Bianconi
Add frame length to mt76x2_mac_write_txwi routine signature and do not fetch it from skb since txwi data structure is added at the beginning of the skb for usb based devices and mt76x2_mac_write_txwi will be shared between pci and usb related code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signaturesLorenzo Bianconi
in order to reuse mt76_rx_complete routine supporting mt76x2u based devices add napi struct to mt76_rx_poll_complete and mt76_rx_complete routine signatures and do not fetch it according to the rx queue index Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: introduce mt76x2_mac_load_tx_status routineLorenzo Bianconi
Add mt76x2_mac_load_tx_status routine since tx stats register map is shared between usb and pci based devices but usb devices do not have a tx stat irq line as pcie ones and it is necessary to load tx statistics using a workqueue Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: move interface_modes definition in mt76x2_initLorenzo Bianconi
Move wiphy interface_modes definition in mt76x2_init in order to reuse mt76_register_device routine supporting mt76x2u based chipsets since mt76x2u currently supports just sta mode Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: introduce mt76x2_init_device routineLorenzo Bianconi
Add mt76x2_init_device routine in order to reuse common pcie/usb mac80211 initialization code supporting mt76x2u based device Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: move utility routines in mt76x2.hLorenzo Bianconi
In order to reuse them supporting mt76x2u based devices, move mt76x2_wait_for_mac, wait_for_wpdma and mt76x2_channel_silent in mt76x2.h Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76x2: move mt76x2_fw_header and mt76x2_patch_header definitions in mcu.hLorenzo Bianconi
move mt76x2_fw_header and mt76x2_patch_header definitions in mcu.h in order to reuse them in mt76x2u mcu related code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02mt76: move MT_TXD_INFO, MT_MCU_MSG and MT_RX_FCE_INFO defs in dma.hLorenzo Bianconi
Since MT_TXD_INFO, MT_MCU_MSG and MT_RX_FCE_INFO definitions are in common between mt76x2u, mt76x2 and mt76x0u move them in dma.h in order to reuse usb code supporting mt76x2u and mt76x0u based devices Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02be2net: fix spelling mistake "seqence" -> "sequence"Colin Ian King
Trivial fix to spelling mistake in dev_info message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: fec: check DMA addressing limitationsStefan Agner
Check DMA addressing limitations as suggested by the DMA API how-to. This does not fix a particular issue seen but is considered good style. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 08:19:13 +0000