| Age | Commit message (Collapse) | Author |
|---|
|
Energy Efficient Ethernet should always be negotiated with the link
peer. Don't include SUPPORTED_Autoneg in the results of get_eee() for
supported, advertised or lp_advertised, since it is
assumed. Additionally, ethtool(1) ignores the set bit, and no other
driver sets this.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the tables to make use of ETHTOOL link mode bits, rather than
the old u32 SUPPORTED speeds. Make use of the linkmode helps to set
bits and compare linkmodes. As a result, the _u32 members of keee are
no longer used, a step towards removing them.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for bit manipulation of EEE
advertise, support and link partner support. The aim is to drop the
restricted _u32 variants in the near future.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Rework determining if EEE is active to make is similar as to how
phylib decides, and make use of a phylib helper to validate if EEE is
valid in for the current link mode. This then requires that PHYLIB is
selected.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Moving struct ieee80211_sta *sta variable definition to the front
of the code to fix the ISO C90 forbids mixed declarations and code
warning.
Fixes: 43532c050f8e ("wifi: rtl8xxxu: support multiple interfaces in set_aifs()")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/TYAP286MB03157A408E0D69F2F6FBD88ABC552@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
This code wants to compare the obtained value, but as it also
has a special type for register addresses to find places doing
such compares and calculations wrong, we need explicit casts
here to silence sparse.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.976fcd59e97a.I0bba4ef7dc2847ce8ab5ec229149e1a09413b8b9@changeid
|
|
Clearly writing __le32 was intended here, so just put the
right casts into the code to silence sparse about it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.ce0c714124e9.I2b5710b761f63522574fbe7654d37151c31e0b77@changeid
|
|
sparse complains on this code about casts that lose bits
due to the usage of bitwise not, but really we do want
16 bits only, so clarify that by using masks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.06e5ade90bcd.I41a0cbae1fa259cfbf5fa117ddfce908877475a2@changeid
|
|
sparse complains on this code about casts that lose bits
due to the usage of bitwise not, but really we do want
16 bits only, so clarify that by using masks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240223114023.c64e2d348453.Iccc4ace1116721a044e5f31f40ea7709e72145f3@changeid
|
|
Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.
This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.
To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.
Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
<Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
Fixes: 5a5586112b929 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Updating link clock rate for different speeds is only needed when
using RGMII, as that mode requires changing clock speed when the link
speed changes. Let's restrict updating the link clock speed in
ethqos_update_link_clk() to just RGMII. Other modes such as SGMII
only need to enable the link clock (which is already done in probe).
Signed-off-by: Sarosh Hasan <quic_sarohasa@quicinc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a previous patch I added "select PHYLIB" at the wrong place for the
ADIN1110 driver symbol, so move it to its correct place under the
ADIN1110 kconfig symbol.
Fixes: a9f80df4f514 ("net: ethernet: adi: requires PHYLIB support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/lkml/77012b38-4b49-47f4-9a88-d773d52909ad@infradead.org/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3
Cc: Lennart Franzen <lennart@lfdomain.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: Nuno Sa <nuno.sa@analog.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for resetting the device using a reset controller,
complementing the existing GPIO reset functionality (reset-gpios).
Although the reset is optional and the driver performs a soft reset
during setup, if the initial reset pin state was asserted, the driver
will not detect the device until the reset is deasserted.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.8-rc7
Few remaining fixes, hopefully the last wireless pull request to v6.8.
Two fixes to the stack and two to iwlwifi but no high priority fixes
this time.
* tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: only call drv_sta_rc_update for uploaded stations
MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files
MAINTAINERS: wifi: update Jeff Johnson e-mail address
wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
wifi: iwlwifi: mvm: ensure offloading TID queue exists
wifi: nl80211: reject iftype change with mesh ID change
====================
Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Disable BH around the call to napi_schedule() to avoid following
error:
NOHZ tick-stop error: local softirq work is pending, handler #08!!!
Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace macro MAC_ADDRESS_EQUAL() for null_mac_addr checking with inline
function__agg_has_partner(). When MAC_ADDRESS_EQUAL() is verifiying
aggregator's partner mac addr with null_mac_addr, means that seeing if
aggregator has a valid partner or not. Using __agg_has_partner() makes it
more clear to understand.
In ad_port_selection_logic(), since aggregator->partner_system and
port->partner_oper.system has been compared first as a prerequisite, it is
safe to replace the upcoming MAC_ADDRESS_EQUAL() for null_mac_addr checking
with __agg_has_partner().
Delete null_mac_addr, which is not required anymore in bond_3ad.c, since
all references to it are gone.
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/SI2PR04MB5097BCA8FF2A2F03D9A5A3EEDC5A2@SI2PR04MB5097.apcprd04.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently using plain XDP/ZC sockets on stmmac results in a kernel crash:
|[ 255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
|[...]
|[ 255.822764] Call trace:
|[ 255.822766] stmmac_tx_clean.constprop.0+0x848/0xc38
The program counter indicates xsk_tx_metadata_complete(). It works on
compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to
missing meta data. Therefore, call xsk_tx_metadata_complete() only when
meta data is actually used.
Tested on imx93 without XDP, with XDP and with XDP/ZC.
Fixes: 1347b419318d ("net: stmmac: Add Tx HWTS support to XDP ZC")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/netdev/87r0h7wg8u.fsf@kurt.kurt.home/
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240222-stmmac_xdp-v2-1-4beee3a037e4@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MII code does not check the return value of mdio_read (among
others), and therefore no error code should be sent. A previous fix to
the use of an uninitialized variable propagates negative error codes,
that might lead to wrong operations by the MII library.
An example of such issues is the use of mii_nway_restart by the dm9601
driver. The mii_nway_restart function does not check the value returned
by mdio_read, which in this case might be a negative number which could
contain the exact bit the function checks (BMCR_ANENABLE = 0x1000).
Return zero in case of error, as it is common practice in users of
mdio_read to avoid wrong uses of the return value.
Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "port_prox" variable is a pointer to "struct port_proxy" and
this structure ends in a flexible array:
struct port_proxy {
[...]
struct t7xx_port ports[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + size * count" in the
devm_kzalloc() function.
This way, the code is more readable and safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240224181932.2720-1-erick.archer@gmx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration
block, but allocates it much later. As a result, the following crash
happens on my setup:
BUG: kernel NULL pointer dereference, address: 0000000000000090
fbcon: Taking over console
#PF: supervisor write access in kernel mode
#PF: error_code (0x0002) - not-present page
PGD 12f382067 P4D 0
Oops: 8002 [#1] PREEMPT SMP NOPTI
CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ #49
Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023
RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en]
Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74
RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000
RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540
FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033
CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x68/0xb0
? page_fault_oops+0x3a6/0x400
? exc_page_fault+0x7a/0x1b0
? asm_exc_page_fault+0x26/8x30
? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en]
? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en]
_bnxt_open_nic+0x198/0xa50 [bnxt_en]
? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en]
bnxt_open+0xeb/0x1b0 [bnxt_en]
_dev_open+0x12e/0x1f0
_dev_change_flags+0xb0/0x200
dev_change_flags+0x25/0x60
do_setlink+0x463/0x1260
? sock_def_readable+0x14/0xc0
? rtnl_getlink+0x4b9/0x590
? _nla_validate_parse+0x91/0xfa0
rtnl_newlink+0xbac/0xe40
<...>
Don't create a variable and dereference the first array member directly
since it's used only once in the code.
Fixes: ef4ee64e9990 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240226144911.1297336-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mt76 patches for 6.9
* fixes
* support for newer chips in the mt7915 driver
* mt7996 improvements
* page pool performance improvement
|
|
In brcmf_cfg80211_start_ap() do not assume that NL80211_HIDDEN_SSID_NOT_IN_USE
is zero but prefer an explicit check instead. Use local variable 'closednet'
to pass in function call and use for error message.
Compile tested only. Addition for the commit f20073f50dfd1 ("wifi: brcmfmac: do
not cast hidden SSID attribute value to boolean").
Signed-off-by: Alexey Berezhok <a@bayrepo.ru>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222122923.46691-1-a@bayrepo.ru
|
|
PCI CLK/ASPM/L1SS is power management mechanism used to reduce power
consumption of PCI chip. The registers for setting of these features
in WiFi 7 Chip are different from WiFi 6 chip, so separate them
in generation information.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222064258.59782-4-pkshih@realtek.com
|
|
Adjust beamforming capabilities to accurately reflect the supported
EHT features by WiFi 7 chip 8922A. It includes 1) Unset EHT CQI
feedback and 16-subcarrier grouping. 2) Correct Beamformee SS value.
3) Enable partial and full bandwidth SU/MU feedback.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222064258.59782-3-pkshih@realtek.com
|
|
Add support for random serial number in probe request and
configure channel dwell time. Advertise corresponding feature flag
NL80211_EXT_FEATURE_SCAN_RANDOM_SN and NL80211_EXT_FEATURE_SET_SCAN_DWELL.
Use the scan request duration as channel dwell time when it is
non-zero, otherwise use the default value.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240222064258.59782-2-pkshih@realtek.com
|
|
Fix boot crash on Raspberry Pi by moving the update to `event->datalen`
before data is copied into flexible-array member `data` via `memcpy()`.
Flexible-array member `data` was annotated with `__counted_by(datalen)`
in commit 62d19b358088 ("wifi: brcmfmac: fweh: Add __counted_by for
struct brcmf_fweh_queue_item and use struct_size()"). The intention of
this is to gain visibility into the size of `data` at run-time through
its _counter_ (in this case `datalen`), and with this have its accesses
bounds-checked at run-time via CONFIG_FORTIFY_SOURCE and
CONFIG_UBSAN_BOUNDS.
To effectively accomplish the above, we shall update the counter
(`datalen`), before the first access to the flexible array (`data`),
which was also done in the mentioned commit.
However, commit edec42821911 ("wifi: brcmfmac: allow per-vendor event
handling") inadvertently caused a buffer overflow, detected by
FORTIFY_SOURCE. It moved the `event->datalen = datalen;` update to after
the first `data` access, at which point `event->datalen` was not yet
updated from zero (after calling `kzalloc()`), leading to the overflow
issue.
This fix repositions the `event->datalen = datalen;` update before
accessing `data`, restoring the intended buffer overflow protection. :)
Fixes: edec42821911 ("wifi: brcmfmac: allow per-vendor event handling")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://gist.github.com/nathanchance/e22f681f3bfc467f15cdf6605021aaa6
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/Zc+3PFCUvLoVlpg8@neat
|
|
struct veth_rq is pretty large, 832B total without debug
options enabled. Since commit under Fixes we try to pre-allocate
enough queues for every possible CPU. Miao Wang reports that
this may lead to order-5 allocations which will fail in production.
Let the allocation fallback to vmalloc() and try harder.
These are the same flags we pass to netdev queue allocation.
Reported-and-tested-by: Miao Wang <shankerwangmiao@gmail.com>
Fixes: 9d3684c24a52 ("veth: create by default nr_possible_cpus queues")
Link: https://lore.kernel.org/all/5F52CAE2-2FB7-4712-95F1-3312FBBFA8DD@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240223235908.693010-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When rebuilding the lif after an FLR, be sure to restore the
current netdev features, not do the usual first time feature
init. This prevents losing user changes to things like TSO
or vlan tagging states.
Fixes: 45b84188a0a4 ("ionic: keep filters across FLR")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since we now have potential cases of NULL cmd_regs and info_regs
during a reset recovery, and left NULL if a reset recovery has
failed, we need to check that they exist before we use them.
Most of the cases were covered in the original patch where we
verify before doing the ioreadb() for health or cmd status.
However, we need to protect a few uses of io mem that could
be hit in error recovery or asynchronous threads calls as well
(e.g. ethtool or devlink handlers).
Fixes: 219e183272b4 ("ionic: no fw read when PCI reset failed")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AER recovery handler can trigger a PCI Reset after tearing
down the device setup in the error detection handler. The PCI
Reset handler will also attempt to tear down the device setup,
and this second tear down needs to know that it doesn't need
to call pci_release_regions() a second time. We can clear
num_bars on tear down and use that to decide later if we need
to clear the resources. This prevents a harmless but disturbing
warning message
resource: Trying to free nonexistent resource <0xXXXXXXXXXX-0xXXXXXXXXXX>
Fixes: c3a910e1c47a ("ionic: fill out pci error handlers")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All of the thermal_zone_device_register_with_trips() callers pass zero
writable trip points masks to it, so drop the mask argument from that
function and update all of its callers accordingly.
This also removes the artificial trip points per zone limit of 32,
related to using writable trip points masks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
It is now possible to flag trip points with THERMAL_TRIP_FLAG_RW_TEMP
to allow their temperature to be set from user space via sysfs instead
of using a nonzero writable trips mask during thermal zone registration,
so make the iwlwifi code do that.
No intentional functional impact.
Note that this change is requisite for dropping the mask argument from
thermal_zone_device_register_with_trips() going forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
It is now possible to flag trip points with THERMAL_TRIP_FLAG_RW_TEMP
to allow their temperature to be set from user space via sysfs instead
of using a nonzero writable trips mask during thermal zone registration,
so make the mlxsw code do that.
No intentional functional impact.
Note that this change is requisite for dropping the mask argument from
thermal_zone_device_register_with_trips() going forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The MMC IPC interrupt status and interrupt mask registers are
of little use as Ethernet statistics, but incrementing counters
based on the current interrupt and interrupt mask registers
makes them actively misleading.
For example, if the interrupt mask is set to 0x08420842,
the current code will increment by that amount each iteration,
leading to the following sequence of nonsense:
mmc_rx_ipc_intr_mask: 969816526
mmc_rx_ipc_intr_mask: 1108361744
These registers have been included in the Ethernet statistics
since the first version of MMC back in 2011 (commit 1c901a46d57).
That commit also mentions the MMC interrupts as
"something to add later (if actually useful)".
If the registers are actually useful, they should probably
be part of the Ethernet register dump instead of statistics,
but for now, drop the counters for mmc_rx_ipc_intr and
mmc_rx_ipc_intr_mask completely.
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223-stmmac_stats-v3-1-5d483c2a071a@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to do a clause 22 access to the PHY registers of the ADIN1110,
we have to write the MDIO frame to the ADIN1110_MDIOACC register, and
then poll the MDIO_TRDONE bit (for a 1) in the same register. The
device will set this bit to 1 once the internal MDIO transaction is
done. In practice, this bit takes ~50 - 60 us to be set.
The first attempt to poll the bit is right after the ADIN1110_MDIOACC
register is written, so it will always be read as 0. The next check will
only be done after 10 ms, which will result in the MDIO transactions
taking a long time to complete. Reduce this polling interval to 100 us.
Since this interval is short enough, switch the poll function to
readx_poll_timeout_atomic() instead.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240223162129.154114-1-ciprian.regus@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In ipa_interrupt_suspend_clear_all(), if the SUSPEND_INFO register
read contains no set bits, there's no interrupt condition to clear.
Skip the write to the clear register in that case.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that ipa_power_suspend_handler() is a trivial wrapper around
ipa_interrupt_suspend_clear_all(), we can open-code it in the one
place it's used, and get rid of the function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The next patch makes ipa_interrupt_suspend_clear_all() static,
calling it only within "ipa_interrupt.c". Move its definition
higher in the file so no declaration is needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The IPA_POWER_FLAG_RESUMED was originally used to avoid calling
pm_wakeup_dev_event() more than once when handling a SUSPEND
interrupt. This call is no longer made, so there' no need for the
flag, so get rid of it.
That leaves no more IPA power flags usefully defined, so just get
rid of the bitmap in the IPA power structure and the definition of
the ipa_power_flag enumerated type.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The SYSTEM IPA power flag is set, cleared, and tested. But nothing
happens based on its value when tested, so it serves no purpose.
Get rid of this flag.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The IPA interrupt can fire if there is data to be delivered to a GSI
channel that is suspended. This condition occurs in three scenarios.
First, runtime power management automatically suspends the IPA
hardware after half a second of inactivity. This has nothing
to do with system suspend, so a SYSTEM IPA power flag is used to
avoid calling pm_wakeup_dev_event() when runtime suspended.
Second, if the system is suspended, the receipt of an IPA interrupt
should trigger a system resume. Configuring the IPA interrupt for
wakeup accomplishes this.
Finally, if system suspend is underway and the IPA interrupt fires,
we currently call pm_wakeup_dev_event() to abort the system suspend.
The IPA driver correctly handles quiescing the hardware before
suspending it, so there's really no need to abort a suspend in
progress in the third case. We can simply quiesce and suspend
things, and be done.
Incoming data can still wake the system after it's suspended.
The IPA interrupt has wakeup mode enabled, so if it fires *after*
we've suspended, it will trigger a wakeup (if not disabled via
sysfs).
Stop calling pm_wakeup_dev_event() to abort a system suspend in
progress in ipa_power_suspend_handler().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Simplify the function, no functional change intended.
- Remove not needed variable unsupp, I think code is even better
readable now.
- Move setting phydev->eee_enabled out of the if clause
- Simplify return value handling
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/442277c7-7431-4542-80b5-1d3d691714d7@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Do not set rtnl_link_stats64 fields to zero, since they are zeroed
before ops->ndo_get_stats64 is called in core dev_get_stats() function.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240223115839.3572852-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the vsockmon driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20240223115839.3572852-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not
present or not flashed, LAN7850 will fail to sync the speed detected by the PHY
with the MAC. In case link speed is 100Mbit, it will accidentally work,
otherwise no data can be transferred.
Better way would be to implement link_up callback, or set auto speed
configuration unconditionally. But this changes would be more intrusive.
So, for now, set it only if no EEPROM is found.
Fixes: e69647a19c87 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Workqueue is in the process of cleaning up the distinction between unbound
workqueues w/ @nr_active==1 and ordered workqueues. Explicit WQ_UNBOUND
isn't needed for alloc_ordered_workqueue() and will trigger a warning in the
future. Let's remove it. This doesn't cause any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Message-ID: <ZcF1El7fn5xkeoB1@slm.duckdns.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-ID: <20240202064659.39434-1-liubo03@inspur.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Message-ID: <20240202064611.39346-1-liubo03@inspur.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
