| Age | Commit message (Collapse) | Author |
|---|
|
When connected with 802.11ax AP, MU-EDCA parameters are given, so enable
this hardware function by registers according to chip generation.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231012021455.19816-3-pkshih@realtek.com
|
|
When TX size or time of packet over RTS threshold set by this register,
hardware will use RTS protection automatically. Since WiFi 6 and 7 chips
have different register address for this, separate the address according
to chip gen.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231012021455.19816-2-pkshih@realtek.com
|
|
Since 'rtlpriv->cfg->ops->fill_tx_cmddesc()' is always called
with 'firstseg' and 'lastseg' set to 1 (and the latter is
never actually used), all of the relevant chip-specific
routines may be simplified. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011154442.52457-2-dmantipov@yandex.ru
|
|
The ioctl handler has no actual callers in the kernel and is useless.
All the functionality should be reachable through the regualar interfaces.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011140225.253106-9-arnd@kernel.org
|
|
This function has no callers, and for the past 20 years, the request_firmware
interface has been in place instead of the custom firmware loader.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011140225.253106-8-arnd@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-10-12
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix VF representors reporting zero counters to "ip -s" command
net/mlx5e: Don't offload internal port if filter device is out device
net/mlx5e: Take RTNL lock before triggering netdev notifiers
net/mlx5e: XDP, Fix XDP_REDIRECT mpwqe page fragment leaks on shutdown
net/mlx5e: RX, Fix page_pool allocation failure recovery for legacy rq
net/mlx5e: RX, Fix page_pool allocation failure recovery for striding rq
net/mlx5: Handle fw tracer change ownership event based on MTRC
net/mlx5: Bridge, fix peer entry ageing in LAG mode
net/mlx5: E-switch, register event handler before arming the event
net/mlx5: Perform DMA operations in the right locations
====================
Link: https://lore.kernel.org/r/20231012195127.129585-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One thing is broken in the safe mode, that is
ice_deinit_features() is being executed even
that ice_init_features() was not causing stack
trace during pci_unregister_driver().
Add check on the top of the function.
Fixes: 5b246e533d01 ("ice: split probe into smaller functions")
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-4-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the system boots into the crash dump kernel after a panic, the ice
networking device may still have pending transactions that can cause errors
or machine checks when the device is re-enabled. This can prevent the crash
dump kernel from loading the driver or collecting the crash data.
To avoid this issue, perform a function level reset (FLR) on the ice device
via PCIe config space before enabling it on the crash kernel. This will
clear any outstanding transactions and stop all queues and interrupts.
Restore the config space after the FLR, otherwise it was found in testing
that the driver wouldn't load successfully.
The following sequence causes the original issue:
- Load the ice driver with modprobe ice
- Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs
- Trigger a crash with echo c > /proc/sysrq-trigger
- Load the ice driver again (or let it load automatically) with modprobe ice
- The system crashes again during pcim_enable_device()
Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Reported-by: Vishal Agrawal <vagrawal@redhat.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hardware provides the indexes of the first and the last available
queue and VF. From the indexes, the driver calculates the numbers of
queues and VFs. In theory, a faulty device might say the last index is
smaller than the first index. In that case, the driver's calculation
would underflow, it would attempt to write to non-existent registers
outside of the ioremapped range and crash.
I ran into this not by having a faulty device, but by an operator error.
I accidentally ran a QE test meant for i40e devices on an ice device.
The test used 'echo i40e > /sys/...ice PCI device.../driver_override',
bound the driver to the device and crashed in one of the wr32 calls in
i40e_clear_hw.
Add checks to prevent underflows in the calculations of num_queues and
num_vfs. With this fix, the wrong device probing reports errors and
returns a failure without crashing.
Fixes: 838d41d92a90 ("i40e: clear all queues and interrupts")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/20231011233334.336092-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
This patch eliminates three uses of strncpy():
Firstly, `dest` is expected to be NUL-terminated which is evident by the
manual setting of a NUL-byte at size - 1. For this use specifically,
strscpy() is a viable replacement due to the fact that it guarantees
NUL-termination on the destination buffer.
The next two cases should simply be memcpy() as the size of the src
string is always 3 and the destination string just wants the first 3
bytes changed.
To be clear, there are no buffer overread bugs in the current code as
the sizes and offsets are carefully managed such that buffers are
NUL-terminated. However, with these changes, the code is now more robust
and less ambiguous (and hopefully easier to read).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-ethernet-qlogic-qed-qed_debug-c-v2-1-16d2c0162b80@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In very rare cases (I've seen two reports so far about different
RTL8125 chip versions) it seems the MAC locks up when link goes down
and requires a software reset to get revived.
Realtek doesn't publish hw errata information, therefore the root cause
is unknown. Realtek vendor drivers do a full hw re-initialization on
each link-up event, the slimmed-down variant here was reported to fix
the issue for the reporting user.
It's not fully clear which parts of the NIC are reset as part of the
software reset, therefore I can't rule out side effects.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Martin Kjær Jørgensen <me@lagy.org>
Link: https://lore.kernel.org/netdev/97ec2232-3257-316c-c3e7-a08192ce16a6@gmail.com/T/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9edde757-9c3b-4730-be3b-0ef3a374ff71@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ICSSG HW stats on TX side considers 8 preamble bytes as data bytes. Due
to this the tx_bytes of ICSSG interface doesn't match the rx_bytes of the
link partner. There is no public errata available yet.
As a workaround to fix this, decrease tx_bytes by 8 bytes for every tx
frame.
Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20231012064626.977466-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable the attachment of a dynamic target to the target created during
boot time. The boot-time targets are named as "cmdline\d", where "\d" is
a number starting at 0.
If the user creates a dynamic target named "cmdline0", it will attach to
the first target created at boot time (as defined in the
`netconsole=...` command line argument). `cmdline1` will attach to the
second target and so forth.
If there is no netconsole target created at boot time, then, the target
name could be reused.
Relevant design discussion:
https://lore.kernel.org/all/ZRWRal5bW93px4km@gmail.com/
Suggested-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231012111401.333798-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For netconsole targets allocated during the boot time (passing
netconsole=... argument), netconsole_target->item is not initialized.
That is not a problem because it is not used inside configfs.
An upcoming patch will be using it, thus, initialize the targets with
the name 'cmdline' plus a counter starting from 0. This name will match
entries in the configfs later.
Suggested-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231012111401.333798-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move alloc_param_target() and its counterpart (free_param_target())
to the bottom of the file. These functions are called mostly at
initialization/cleanup of the module, and they should be just above the
callers, at the bottom of the file.
From a practical perspective, having alloc_param_target() at the bottom
of the file will avoid forward declaration later (in the following
patch).
Nothing changed other than the functions location.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20231012111401.333798-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
`desc` is expected to be NUL-terminated as evident by the manual
NUL-byte assignment. Moreover, NUL-padding does not seem to be
necessary.
The only caller of efx_mcdi_nvram_metadata() is
efx_devlink_info_nvram_partition() which provides a NULL for `desc`:
| rc = efx_mcdi_nvram_metadata(efx, partition_type, NULL, version, NULL, 0);
Due to this, I am not sure this code is even reached but we should still
favor something other than strncpy.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-ethernet-sfc-mcdi-c-v1-1-478c8de1039d@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this dedicated helper function.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-phy-nxp-tja11xx-c-v1-1-5ad6c9dff5c4@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
NUL-padding is not needed due to `ident` being memset'd to 0 just before
the copy.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-pensando-ionic-ionic_main-c-v1-1-23c62a16ff58@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy() in favor of this more robust and easier to
understand interface.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-microchip-sparx5-sparx5_ethtool-c-v1-1-410953d07f42@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect `dst` to be NUL-terminated based on its use with format
strings:
| mlx4_dbg(dev, "Reporting Driver Version to FW: %s\n", dst);
Moreover, NUL-padding is not required.
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-mellanox-mlx4-fw-c-v1-1-4d7b5d34c933@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect res->name to be NUL-terminated based on its usage with format
strings:
| dev_err(cpp->dev.parent, "Dangling area: %d:%d:%d:0x%0llx-0x%0llx%s%s\n",
| NFP_CPP_ID_TARGET_of(res->cpp_id),
| NFP_CPP_ID_ACTION_of(res->cpp_id),
| NFP_CPP_ID_TOKEN_of(res->cpp_id),
| res->start, res->end,
| res->name ? " " : "",
| res->name ? res->name : "");
... and with strcmp()
| if (!strcmp(res->name, NFP_RESOURCE_TBL_NAME)) {
Moreover, NUL-padding is not required as `res` is already
zero-allocated:
| res = kzalloc(sizeof(*res), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy() usage of (dest, src,
sizeof(dest)) rather than (dest, src, SOME_LEN).
Typically the pattern of 1) allocate memory for string, 2) copy string
into freshly-allocated memory is a candidate for kmemdup_nul() but in
this case we are allocating the entirety of the `res` struct and that
should stay as is. As mentioned above, simple 1:1 replacement of strncpy
-> strscpy :)
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20231011-strncpy-drivers-net-ethernet-netronome-nfp-nfpcore-nfp_resource-c-v1-1-7d1c984f0eba@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver allocates skbs during initialization and during Rx
processing. Take advantage of the fact that the former happens in
process context and allocate the skbs using GFP_KERNEL to decrease the
probability of allocation failure.
Tested with CONFIG_DEBUG_ATOMIC_SLEEP=y.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/dfa6ed0926e045fe7c14f0894cc0c37fee81bf9d.1697034729.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently for VFs, mailbox returns ENODEV error when hardware timestamping
enable is requested. This patch fixes this issue. Modified this patch to
return EPERM error for the PF/VFs which are not attached to CGX/RPM.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231011121551.1205211-1-saikrishnag@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support to show ethtool statistics.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20231011091906.70486-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support to show ethtool statistics.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20231011091906.70486-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement update and clear Rx/Tx statistics.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20231011091906.70486-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the introduction of the ice driver the code has been
double-shifting the RSS enabling field, because the define already has
shifts in it and can't have the regular pattern of "a << shiftval &
mask" applied.
Most places in the code got it right, but one line was still wrong. Fix
this one location for easy backports to stable. An in-progress patch
fixes the defines to "standard" and will be applied as part of the
regular -next process sometime after this one.
Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231010203101.406248-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bcm_sf2_mdio_register(), the class_find_device() will call get_device()
to increment reference count for priv->master_mii_bus->dev if
of_mdio_find_bus() succeeds. If mdiobus_alloc() or mdiobus_register()
fails, it will call get_device() twice without decrement reference count
for the device. And it is the same if bcm_sf2_mdio_register() succeeds but
fails in bcm_sf2_sw_probe(), or if bcm_sf2_sw_probe() succeeds. If the
reference count has not decremented to zero, the dev related resource will
not be freed.
So remove the get_device() in bcm_sf2_mdio_register(), and call
put_device() if mdiobus_alloc() or mdiobus_register() fails and in
bcm_sf2_mdio_unregister() to solve the issue.
And as Simon suggested, unwind from errors for bcm_sf2_mdio_register() and
just return 0 if it succeeds to make it cleaner.
Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231011032419.2423290-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.
This change could result in misaligned strings when if(cnt) fails. To
combat this, use ternary to place empty string in buffer and properly
increment pointer to next string slot.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231010-strncpy-drivers-net-dsa-vitesse-vsc73xx-core-c-v2-1-ba4416a9ff23@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
This PR is collected from
https://lore.kernel.org/all/cover.1695296682.git.leon@kernel.org
This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).
These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.
[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Handle IPsec steering upon master unbind/bind
net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
net/mlx5: Add create alias flow table function to ipsec roce
net/mlx5: Implement alias object allow and create functions
net/mlx5: Add alias flow table bits
net/mlx5: Store devcom pointer inside IPsec RoCE
net/mlx5: Register mlx5e priv to devcom in MPV mode
RDMA/mlx5: Send events from IB driver about device affiliation state
net/mlx5: Introduce ifc bits for migration in a chunk mode
====================
Link: https://lore.kernel.org/r/20231002083832.19746-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
chcr_ktls uses the space reserved in driver_state by
tls_set_device_offload, but makes up into own wrapper around
tls_offload_context_tx instead of accessing driver_state via the
__tls_driver_ctx helper.
In this driver, driver_state is only used to store a pointer to a
larger context struct allocated by the driver.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is just a trivial fix for a typo in a comment, no functional
changes.
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since 429e3d123d9a ("bonding: Fix extraction of ports from the packet
headers"), header offsets used to compute a hash in bond_xmit_hash() are
relative to skb->data and not skb->head. If the tail of the header buffer
of an skb really needs to be advanced and the operation is successful, the
pointer to the data must be returned (and not a pointer to the head of the
buffer).
Fixes: 429e3d123d9a ("bonding: Fix extraction of ports from the packet headers")
Signed-off-by: Jiri Wiesner <jwiesner@suse.de>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add software timestamp capabilities to the xen-netback driver
by advertising it on the struct ethtool_ops and calling
skb_tx_timestamp before passing the buffer to the queue.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
NUL-padding is not required as the buffer is already memset to 0:
| memset(adapter->fw_version, 0, 32);
Note that another usage of strscpy exists on the same buffer:
| strscpy((char *)adapter->fw_version, "N/A", sizeof(adapter->fw_version));
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
ethtool_sprintf() is designed specifically for get_strings() usage.
Let's replace strncpy in favor of this more robust and easier to
understand interface.
Also, while we're here, let's change memcpy() over to ethtool_sprintf()
for consistency.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use preferred device_get_match_data() instead of of_match_device() and
acpi_match_device() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct_size()
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use preferred spi_get_device_match_data() instead of of_match_device() and
spi_get_device_id() to get the driver match data. With this, adjust the
includes to explicitly include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, clock configuration is spread throughout the driver and
partially duplicated for the STM32MP1 and STM32 MCU variants. This makes
it difficult to keep track of which clocks need to be enabled or disabled
in various scenarios.
This patch adds symmetric stm32_dwmac_clk_enable/disable() functions
that handle all clock configuration, including quirks required while
suspending or resuming. syscfg_clk and clk_eth_ck are not present on
STM32 MCUs, but it is fine to try to configure them anyway since NULL
clocks are ignored.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by destination IP. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination IP is an attribute of
the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.
In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination IP', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.
For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.1 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 1000 self permanent
When user flush by destination IP x, only the relevant remotes will be
flushed:
$ bridge fdb flush dev vx10 dst 192.1.1.1
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.3 self permanent
00:00:00:00:00:00 dst 192.1.1.2 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by destination port. FDB entry
is stored as {MAC, SRC_VNI} + remote. The destination port is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.
In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination port', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.
For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 1111 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
When user flush by port x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 port 1111
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 port 2222 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by destination VNI. FDB entry is
stored as {MAC, SRC_VNI} + remote. The destination VNI is an attribute
of the remote. For multicast entries, the VXLAN driver stores a linked list
of remotes for a given key.
In user space, each remote is represented as a separate entry, so when
flush is sent with filter of 'destination VNI', flush only the match
remotes. In case that there are no additional remotes, destroy the entry.
For example, the following are stored as one entry with several remotes:
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 2000 self permanent
00:00:00:00:00:00 dst 192.1.1.2 vni 2000 self permanent
When user flush by VNI x, only the relevant remotes will be flushed:
$ bridge fdb flush dev vx10 vni 2000
$ bridge fdb show dev vx10
00:00:00:00:00:00 dst 192.1.1.1 vni 3000 self permanent
00:00:00:00:00:00 dst 192.1.1.1 vni 4000 self permanent
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by nexthop ID.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for flush VXLAN FDB entries by source VNI.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The merge commit 92716869375b ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver only, the VXLAN driver does
not support such flushing. Extend VXLAN driver to support FDB flushing.
In this commit, add support for flushing with state and flags, which are
the fields that supported in the bridge driver.
Note that bridge driver supports 'NTF_USE' flag, but there is no point to
support this flag for flushing as it is ignored when flags are stored.
'NTF_STICKY' is not relevant for VXLAN driver.
'NTF_ROUTER' is not supported in bridge driver for flush as it is not
relevant for bridge, add it for VXLAN.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the function vxlan_flush() does not flush the default FDB entry
(an entry with all_zeros_mac and default VNI), as it is deleted at
vxlan_uninit(). When this function will be used for flushing FDB entries
from user space, it will have to flush also the default entry in case that
other parameters match (e.g., VNI, flags).
Extend 'struct vxlan_fdb_flush_desc' to include an indication whether
the default entry should be flushed or not. The default value (false)
indicates to flush it, adjust all the existing callers to set
'.ignore_default_entry' to true, so the current behavior will not be
changed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function vxlan_flush() gets a boolean called 'do_all' and in case
that it is false, it does not flush entries with state 'NUD_PERMANENT'
or 'NUD_NOARP'. The following patches will add support for FDB flush
with parameters from user space. Make the function more generic, so it
can be used later.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
