summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2023-12-01hv_netvsc: rndis_filter needs to select NLSRandy Dunlap
rndis_filter uses utf8s_to_utf16s() which is provided by setting NLS, so select NLS to fix the build error: ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined! Fixes: 1ce09e899d28 ("hyperv: Add support for setting MAC from within guests") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-01octeontx2-af: debugfs: update CQ context fieldsNithin Dabilpuram
This patch update the CQ structure fields to support the feature added in new silicons and also dump these fields in debugfs. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Link: https://lore.kernel.org/r/20231130060703.16769-1-gakula@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-01net/tg3: fix race condition in tg3_reset_task()Thinh Tran
When an EEH error is encountered by a PCI adapter, the EEH driver modifies the PCI channel's state as shown below: enum { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1, /* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2, /* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, }; If the same EEH error then causes the tg3 driver's transmit timeout logic to execute, the tg3_tx_timeout() function schedules a reset task via tg3_reset_task_schedule(), which may cause a race condition between the tg3 and EEH driver as both attempt to recover the HW via a reset action. EEH driver gets error event --> eeh_set_channel_state() and set device to one of error state above scheduler: tg3_reset_task() get returned error from tg3_init_hw() --> dev_close() shuts down the interface tg3_io_slot_reset() and tg3_io_resume() fail to reset/resume the device To resolve this issue, we avoid the race condition by checking the PCI channel state in the tg3_reset_task() function and skip the tg3 driver initiated reset when the PCI channel is not in the normal state. (The driver has no access to tg3 device registers at this point and cannot even complete the reset task successfully without external assistance.) We'll leave the reset procedure to be managed by the EEH driver which calls the tg3_io_error_detected(), tg3_io_slot_reset() and tg3_io_resume() functions as appropriate. Adding the same checking in tg3_dump_state() to avoid dumping all device registers when the PCI channel is not in the normal state. Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com> Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com> Reviewed-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-01wifi: wcn36xx: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231117093056.873834-12-u.kleine-koenig@pengutronix.de
2023-12-01wifi: ath5k: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231117093056.873834-10-u.kleine-koenig@pengutronix.de
2023-12-01wifi: ath12k: avoid repeated hw access from arKarthikeyan Periyasamy
Currently, the helper functions are accessing mac80211 hw data from the radio (ar) structure repeatedly. So optimize these helper functions by storing mac80211 hw data locally and accessing it directly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231120235812.2602198-3-quic_periyasa@quicinc.com
2023-12-01wifi: ath12k: Optimize the mac80211 hw data accessKarthikeyan Periyasamy
Currently mac80211 hw data is accessed by convert the hw to radio (ar) structure and then radio to hw structure which is not necessary in some places where mac80211 hw data is already present. So in that kind of places avoid the conversion and directly access the mac80211 hw data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231120235812.2602198-2-quic_periyasa@quicinc.com
2023-12-01wifi: ath12k: add 320 MHz bandwidth enumsMuna Sinada
Add 320 MHz bandwidth as a new bandwidth enum for ATH12k driver. This is extending existing bandwidth related enums to include 320 MHz. This is a precursor to supporting 320 MHz in the future. Sanity test performed to confirm that there was no impact in existing bandwidths. Additionally update QuIC copyright to include 2023 in hal_rx.h. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231116221839.1303170-1-quic_msinada@quicinc.com
2023-12-01wifi: rtw89: fix misbehavior of TX beacon in concurrent modeChih-Kang Chang
In concurrent mode, when STA interface is scanning, it causes AP interface TX beacon on wrong channel. We modified it to scan with the operating channel when one of the interfaces is already connected. Additionally, STA interface need to stop scan when AP interface is starting to avoid TX beacon on wrong channel. Finally, AP interface need to stop TX beacon when STA interface is scanning and switching to non-OP channel,This prevent other device to get beacons on wrong channel. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231129070046.18443-5-pkshih@realtek.com
2023-12-01wifi: rtw89: refine remain on channel flow to improve P2P connectionChih-Kang Chang
We add a scanning check to avoid entering IPS after ROC (remain on channel) during scanning. Additionally, When P2P scanning, the flow is `1. p2p_listen step` and `2. configure filter` and `3. p2p_scan starts` in wpas, but in kernel, cfg80211 uses another workqueue to notify driver the filter change, so sometimes we see (1 > 3 > 2), that will cause Rx filter related to scan to be cleared. Therefore, we add a scanning check when configure filter to avoid scan results to be filtered. Finally, we cancel the ROC delayed workqueue before entering ROC to avoid entering twice, which might cause leaving ROC too early. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231129070046.18443-4-pkshih@realtek.com
2023-12-01wifi: rtw89: Refine active scan behavior in 6 GHzPo-Hao Huang
The interval between sending each probe request is regulated. Before this patch, some packets are not sent out properly because of our HW limit. Extend the 6 GHz channel dwell time to cope with this. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231129070046.18443-3-pkshih@realtek.com
2023-12-01wifi: rtw89: fix not entering PS mode after AP stopsPo-Hao Huang
The attempt to enter power save mode might fail if there are still beacons pending in the queue. This sometimes happens after stopping P2P GO or AP mode. Extend stop AP function and flush all beacons to resolve this. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231129070046.18443-2-pkshih@realtek.com
2023-12-01wifi: rt2x00: make watchdog param per deviceStanislaw Gruszka
We can run PCI/MMIO devices together with USB devices in the system. Make watchdog parameter per device to avoid situation when plugin USB device change modparam_watchdog for PCI/MMIO device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Shiji Yang <yangshiji66@outlook.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231126195358.500259-1-stf_xl@wp.pl
2023-12-01wifi: rtlwifi: Remove bridge vendor/device idsIlpo Järvinen
Neither vendorid nor deviceid in the struct mp_adapter is used so remove them. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-11-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: Remove unused PCI related defines and structIlpo Järvinen
The rtlwifi driver comes with a number of PCI related defines that are unused and many would be provided by PCI core anyway if they'd be needed again. Similarly, the struct rtl_pci_capabilities_header is unused and no driver should come up their own way to access PCI Capabilities anyway. Remove the unused/duplicated PCI related defines and struct. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-10-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: rtl8821ae: Access full PMCS reg and use pci_regs.hIlpo Järvinen
_rtl8821ae_clear_pci_pme_status() accesses the upper byte of the Power Management Control/Status register (PMCS) with literal 5 offset. Access the entire PMCS register using defines from pci_regs.h to improve code readability. While at it, remove the obvious comment and tweak debug prints slightly to not sound misleading. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-9-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: rtl8821ae: Add pdev into _rtl8821ae_clear_pci_pme_status()Ilpo Järvinen
Add local variable pdev to shorten rtlpci->pdev. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-8-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: rtl8821ae: Use pci_find_capability()Ilpo Järvinen
Instead of open coding the capability structure search, find the PM Capability using pci_find_capability(). While at it, rename the generic 'cap_pointer' to 'pm_cap' which makes the intent of the code more obvious. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-7-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: rtl8821ae: Reverse PM Capability exists checkIlpo Järvinen
Check if PM Capability does not exists and return early which follows the usual error handling pattern. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-6-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: rtl8821ae: Remove unnecessary PME_Status bit setIlpo Järvinen
BIT(7) (PME_Status) is first checked and then set unnecessarily. Remove the unnecessary setting for the bit that is already on and adjust the comment related to it. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-5-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: Convert to use PCIe capability accessorsIlpo Järvinen
The rtlwifi driver accesses PCIe capabilities through custom config offsets. Convert the accesses to use the normal PCIe capability accessors. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-4-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: Convert LNKCTL change to PCIe cap RMW accessorsIlpo Järvinen
The rtlwifi driver comes with custom code to write into PCIe Link Control register. RMW access for the Link Control register requires locking that is already provided by the standard PCIe capability accessors. Convert the custom RMW code writing into LNKCTL register to standard RMW capability accessors. The accesses are changed to cover the full LNKCTL register instead of touching just a single byte of the register. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-3-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtlwifi: Remove bogus and dangerous ASPM disable/enable codeIlpo Järvinen
Ever since introduction in the commit 0c8173385e54 ("rtl8192ce: Add new driver") the rtlwifi code has, according to comments, attempted to disable/enable ASPM of the upstream bridge by writing into its LNKCTL register. However, the code has never been correct because it performs the writes to the device instead of the upstream bridge. Worse yet, the offset where the PCIe capabilities reside is derived from the offset of the upstream bridge. As a result, the write will use an offset on the device that does not relate to the LNKCTL register making the ASPM disable/enable code outright dangerous. Because of those problems, there is no indication that the driver needs disable/enable ASPM on the upstream bridge. As the Capabilities offset is not correctly calculated for the write to target device's LNKCTL register, the code is not disabling/enabling device's ASPM either. Therefore, just remove the upstream bridge related ASPM disable/enable code entirely. The upstream bridge related ASPM code was the only user of the struct mp_adapter members num4bytes, pcibridge_pciehdr_offset, and pcibridge_linkctrlreg so those are removed as well. Note: This change does not remove the code related to changing the device's ASPM on purpose (which is independent of this flawed code related to upstream bridge's ASPM). Suggested-by: Bjorn Helgaas <bhelgaas@kernel.org> Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Fixes: 886e14b65a8f ("rtlwifi: Eliminate raw reads and writes from PCIe portion") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124084725.12738-2-ilpo.jarvinen@linux.intel.com
2023-12-01wifi: rtw88: sdio: Honor the host max_req_size in the RX pathMartin Blumenstingl
Lukas reports skb_over_panic errors on his Banana Pi BPI-CM4 which comes with an Amlogic A311D (G12B) SoC and a RTL8822CS SDIO wifi/Bluetooth combo card. The error he observed is identical to what has been fixed in commit e967229ead0e ("wifi: rtw88: sdio: Check the HISR RX_REQUEST bit in rtw_sdio_rx_isr()") but that commit didn't fix Lukas' problem. Lukas found that disabling or limiting RX aggregation works around the problem for some time (but does not fully fix it). In the following discussion a few key topics have been discussed which have an impact on this problem: - The Amlogic A311D (G12B) SoC has a hardware bug in the SDIO controller which prevents DMA transfers. Instead all transfers need to go through the controller SRAM which limits transfers to 1536 bytes - rtw88 chips don't split incoming (RX) packets, so if a big packet is received this is forwarded to the host in it's original form - rtw88 chips can do RX aggregation, meaning more multiple incoming packets can be pulled by the host from the card with one MMC/SDIO transfer. This Depends on settings in the REG_RXDMA_AGG_PG_TH register (BIT_RXDMA_AGG_PG_TH limits the number of packets that will be aggregated, BIT_DMA_AGG_TO_V1 configures a timeout for aggregation and BIT_EN_PRE_CALC makes the chip honor the limits more effectively) Use multiple consecutive reads in rtw_sdio_read_port() and limit the number of bytes which are copied by the host from the card in one MMC/SDIO transfer. This allows receiving a buffer that's larger than the hosts max_req_size (number of bytes which can be transferred in one MMC/SDIO transfer). As a result of this the skb_over_panic error is gone as the rtw88 driver is now able to receive more than 1536 bytes from the card (either because the incoming packet is larger than that or because multiple packets have been aggregated). In case of an receive errors (-EILSEQ has been observed by Lukas) we need to drain the remaining data from the card's buffer, otherwise the card will return corrupt data for the next rtw_sdio_read_port() call. Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets") Reported-by: Lukas F. Hartmann <lukas@mntre.com> Closes: https://lore.kernel.org/linux-wireless/CAFBinCBaXtebixKbjkWKW_WXc5k=NdGNaGUjVE8NCPNxOhsb2g@mail.gmail.com/ Suggested-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Lukas F. Hartmann <lukas@mntre.com> Reported-by: Lukas F. Hartmann <lukas@mntre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Lukas F. Hartmann <lukas@mntre.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231120115726.1569323-1-martin.blumenstingl@googlemail.com
2023-12-01wifi: rtw89: mac: functions to configure hardware engine and quota for WiFi ↵Ping-Ke Shih
7 chips Add functions to configure HCI, DMAC (data MAC), DLE (data link engine), HFC (HCI flow control), PLE (payload engine) and etc for WiFi 7 chips. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124071703.132549-9-pkshih@realtek.com
2023-12-01wifi: rtw89: mac: use pointer to access functions of hardware engine and quotaPing-Ke Shih
To share flow with WiFi 7 chips, abstract functions related hardware engines and their quota, so use pointer to access them. This doesn't change logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124071703.132549-8-pkshih@realtek.com
2023-12-01wifi: rtw89: mac: move code related to hardware engine to individual functionsPing-Ke Shih
WiFi 7 chips will use the same functionalities but different registers to control hardware components, so move these stuff into functions, and then we can implement these for WiFi 7 chips later. This patch doesn't change logic. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124071703.132549-7-pkshih@realtek.com
2023-12-01wifi: rtw89: mac: check queue empty according to chip genZong-Zhe Yang
This function, currently called by WoWLAN flow, polls until specific HW queues are empty. The polling bit definitions are not totally the same between WiFi 6 and 7 chips. In addition, the check conditions are also a little different. So, we differentiate the implementations according to chip gen. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124071703.132549-6-pkshih@realtek.com
2023-12-01wifi: rtw89: refine element naming used by queue empty checkZong-Zhe Yang
In queue empty check, one group contains 32 queues. And, the two elements, wde_qempty_acq_num and wde_qempty_mgq_sel, are number of group and select of group. To avoid confusing them with queue number and queue selection, we refine their naming. (don't change logic at all) Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124071703.132549-5-pkshih@realtek.com
2023-12-01wifi: rtw89: add reserved size as factor of DLE used sizePing-Ke Shih
DLE stands for Double Link Engine that is used to maintain buffer page. To avoid linking to wrong pages, we check the used page size during initialization and stop driver probe if the used size is unexpected. Currently, we check the page size used by PLE (payload engine) and WDE (WiFi descriptor engine). For coming WiFi 7 chips, additional reserved size is added for BB as buffer to run LA mode, so add and check the reserved size as well. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124071703.132549-4-pkshih@realtek.com
2023-12-01wifi: rtw89: mac: add to get DLE reserved quotaPing-Ke Shih
The reserved quota of DLE (data link engine) is used for processing next packet. Add this to get quota number, and then WiFi 7 chips can use them. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124071703.132549-3-pkshih@realtek.com
2023-12-01wifi: rtw89: 8922a: extend and add quota numberPing-Ke Shih
Define 8922A buffer quota that are used by HCI control flow, payload engine, descriptor engine and etc for operation modes, such as SCC (single channel concurrence) and download firmware. Since WiFi 7 chips has more buffer classifications, add fields and struct according to design. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231124071703.132549-2-pkshih@realtek.com
2023-12-01wifi: iwlwifi: fw: replace deprecated strncpy with strscpy_padJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. Based on the deliberate `sizeof(dest) ... - 1` pattern we can see that both dump_info->dev_human_readable and dump_info->bus_human_readable are intended to be NUL-terminated. Moreover, since this seems to cross the file boundary let's NUL-pad to ensure no behavior change. strscpy_pad() covers both the NUL-termination and NUL-padding, let's use it. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231019-strncpy-drivers-net-wireless-intel-iwlwifi-fw-dbg-c-v2-1-179b211a374b@google.com
2023-12-01octeontx2-af: Check return value of nix_get_nixlf before using nixlfSubbaraya Sundeep
If a NIXLF is not attached to a PF/VF device then nix_get_nixlf function fails and returns proper error code. But npc_get_default_entry_action does not check it and uses garbage value in subsequent calls. Fix this by cheking the return value of nix_get_nixlf. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-01octeon_ep: set backpressure watermark for RX queuesShinas Rasheed
Set backpressure watermark for hardware RX queues. Backpressure gets triggered when the available buffers of a hardware RX queue falls below the set watermark. This backpressure will propagate to packet processing pipeline in the OCTEON card, so that the host receives fewer packets and prevents packet dropping at host. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-01octeontx2-pf: Add missing mutex lock in otx2_get_pauseparamSubbaraya Sundeep
All the mailbox messages sent to AF needs to be guarded by mutex lock. Add the missing lock in otx2_get_pauseparam function. Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-01octeon_ep: Fix error code in probe()Dan Carpenter
Set the error code if octep_ctrl_net_get_mtu() fails. Currently the code returns success. Fixes: 0a5f8534e398 ("octeon_ep: get max rx packet length from firmware") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sathesh B Edara <sedara@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-30octeon_ep: support OCTEON CN98 devicesShinas Rasheed
Add PCI Endpoint NIC support for Octeon CN98 devices. CN98 devices are part of Octeon 9 family products with similar PCI NIC characteristics to CN93, already supported driver. Add CN98 card to the device id table, as well as support differences in the register fields and certain usage scenarios such as unload. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231129045348.2538843-3-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30octeon_ep: implement device unload control net APIShinas Rasheed
Device unload control net function should inform firmware of driver unload to let it take necessary actions to cleanup. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20231129045348.2538843-2-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30net: phy: mdio_device: Reset device only when necessaryAndrew Halaney
Currently the phy reset sequence is as shown below for a devicetree described mdio phy on boot: 1. Assert the phy_device's reset as part of registering 2. Deassert the phy_device's reset as part of registering 3. Deassert the phy_device's reset as part of phy_probe 4. Deassert the phy_device's reset as part of phy_hw_init The extra two deasserts include waiting the deassert delay afterwards, which is adding unnecessary delay. This applies to both possible types of resets (reset controller reference and a reset gpio) that can be used. Here's some snipped tracing output using the following command line params "trace_event=gpio:* trace_options=stacktrace" illustrating the reset handling and where its coming from: /* Assert */ systemd-udevd-283 [002] ..... 6.780434: gpio_value: 544 set 0 systemd-udevd-283 [002] ..... 6.783849: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => mdiobus_register_device => phy_device_register => fwnode_mdiobus_phy_device_register => fwnode_mdiobus_register_phy => __of_mdiobus_register => stmmac_mdio_register => stmmac_dvr_probe => stmmac_pltfr_probe => devm_stmmac_pltfr_probe => qcom_ethqos_probe => platform_probe /* Deassert */ systemd-udevd-283 [002] ..... 6.802480: gpio_value: 544 set 1 systemd-udevd-283 [002] ..... 6.805886: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => phy_device_register => fwnode_mdiobus_phy_device_register => fwnode_mdiobus_register_phy => __of_mdiobus_register => stmmac_mdio_register => stmmac_dvr_probe => stmmac_pltfr_probe => devm_stmmac_pltfr_probe => qcom_ethqos_probe => platform_probe /* Deassert */ systemd-udevd-283 [002] ..... 6.882601: gpio_value: 544 set 1 systemd-udevd-283 [002] ..... 6.886014: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => phy_probe => really_probe => __driver_probe_device => driver_probe_device => __device_attach_driver => bus_for_each_drv => __device_attach => device_initial_probe => bus_probe_device => device_add => phy_device_register => fwnode_mdiobus_phy_device_register => fwnode_mdiobus_register_phy => __of_mdiobus_register => stmmac_mdio_register => stmmac_dvr_probe => stmmac_pltfr_probe => devm_stmmac_pltfr_probe => qcom_ethqos_probe => platform_probe /* Deassert */ NetworkManager-477 [000] ..... 7.023144: gpio_value: 544 set 1 NetworkManager-477 [000] ..... 7.026596: <stack trace> => gpiod_set_raw_value_commit => gpiod_set_value_nocheck => gpiod_set_value_cansleep => mdio_device_reset => phy_init_hw => phy_attach_direct => phylink_fwnode_phy_connect => __stmmac_open => stmmac_open There's a lot of paths where the device is getting its reset asserted and deasserted. Let's track the state and only actually do the assert/deassert when it changes. Reported-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231127-net-phy-reset-once-v2-1-448e8658779e@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-11-30 We've added 30 non-merge commits during the last 7 day(s) which contain a total of 58 files changed, 1598 insertions(+), 154 deletions(-). The main changes are: 1) Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload, from Stanislav Fomichev with stmmac implementation from Song Yoong Siang. 2) Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques, from Andrii Nakryiko. 3) Add BPF link_info support for uprobe multi link along with bpftool integration for the latter, from Jiri Olsa. 4) Use pkg-config in BPF selftests to determine ld flags which is in particular needed for linking statically, from Akihiko Odaki. 5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits) bpf/tests: Remove duplicate JSGT tests selftests/bpf: Add TX side to xdp_hw_metadata selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP selftests/bpf: Add TX side to xdp_metadata selftests/bpf: Add csum helpers selftests/xsk: Support tx_metadata_len xsk: Add option to calculate TX checksum in SW xsk: Validate xsk_tx_metadata flags xsk: Document tx_metadata_len layout net: stmmac: Add Tx HWTS support to XDP ZC net/mlx5e: Implement AF_XDP TX timestamp and checksum offload tools: ynl: Print xsk-features from the sample xsk: Add TX timestamp and TX checksum offload support xsk: Support tx_metadata_len selftests/bpf: Use pkg-config for libelf selftests/bpf: Override PKG_CONFIG for static builds selftests/bpf: Choose pkg-config for the target bpftool: Add support to display uprobe_multi links selftests/bpf: Add link_info test for uprobe_multi link selftests/bpf: Use bpf_link__destroy in fill_link_info tests ... ==================== Conflicts: Documentation/netlink/specs/netdev.yaml: 839ff60df3ab ("net: page_pool: add nlspec for basic access to page pools") 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support") https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/ While at it also regen, tree is dirty after: 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support") looks like code wasn't re-rendered after "render-max" was removed. Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30wifi: rtw89: debug: remove wrapper of rtw89_debug()Ping-Ke Shih
The wrapper of rtw89_debug() is unnecessary, so just remove it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231122060458.30878-5-pkshih@realtek.com
2023-11-30wifi: rtw89: debug: add debugfs entry to disable dynamic mechanismPing-Ke Shih
A dynamic mechanism is usually an algorithm to adjust registers to adapt to different environment every two seconds. In field, it could get unexpected result, so we need to stop it and adjust registers manually, and then fine tune the algorithm. To stop mechanisms to assist debugging, add a debugfs entry shown as Disabled DM: 0x1 [0] DYNAMIC_EDCCA: X Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231122060458.30878-4-pkshih@realtek.com
2023-11-30wifi: rtw89: phy: dynamically adjust EDCCA thresholdYi-Chen Chen
Add dynamic mechanism EDCCA (Energy Detection Clear Channel Assessment) in track work. Using a fixed-value threshold will make EDCCA particularly sensitive and cause failure to transmit under certain circumstances. Therefore, the threshold is dynamically adjusted to make EDCCA suitable for any situation. However, in some cases, we will adjust the EDCCA threshold to the highest level so that urgent transmissions can be performed successfully, such as scanning. Finally, in order to observe the EDCCA report in time, add the EDCCA perIC register macro and EDCCA HW report analysis. EDCCA logs can be displayed by using the EDCCA debug mask. Signed-off-by: Yi-Chen Chen <jamie_chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231122060458.30878-3-pkshih@realtek.com
2023-11-30wifi: rtw89: debug: add to check if debug mask is enabledPing-Ke Shih
The coming dynamic mechanism of EDCCA adjustment will add a function to dump registers to reflect status. However, if we are not debugging the mechanism, we don't print anything, so avoid reading registers by checking debug mask to reduce IO. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231122060458.30878-2-pkshih@realtek.com
2023-11-30wifi: rtlwifi: rtl8821ae: phy: fix an undefined bitwise shift behaviorSu Hui
Clang static checker warns: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:184:49: The result of the left shift is undefined due to shifting by '32', which is greater or equal to the width of type 'u32'. [core.UndefinedBinaryOperatorResult] If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined.[1][2] For example, when using different gcc's compilation optimization options (-O0 or -O2), the result of '(u32)data << 32' is different. One is 0, the other is old value of data. Let _rtl8821ae_phy_calculate_bit_shift()'s return value less than 32 to fix this problem. Warn if bitmask is zero. [1] https://stackoverflow.com/questions/11270492/what-does-the-c-standard-say-about-bitshifting-more-bits-than-the-width-of-type [2] https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf Fixes: 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree") Signed-off-by: Su Hui <suhui@nfschina.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231127013511.26694-2-suhui@nfschina.com
2023-11-30wifi: rtlwifi: rtl8821ae: phy: remove some useless codeSu Hui
Clang static checker warns: Value stored to 'v1' is never read [deadcode.DeadStores] Value stored to 'channel' is never read [deadcode.DeadStores] Remove them to save some place. Signed-off-by: Su Hui <suhui@nfschina.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231127013511.26694-1-suhui@nfschina.com
2023-11-30wifi: libertas: fix config name in dependency for SDIO supportLukas Bulwahn
Commit 4b478bf6bdd8 ("wifi: libertas: drop 16-bit PCMCIA support") reworks the dependencies for config LIBERTAS, and adds alternative dependencies for USB, SDIO and SPI. The config option SDIO however does not exist in the kernel tree. It was probably intended to refer to the config option MMC, which represents "MMC/SD/SDIO card support" and is used as dependency by various other drivers that use SDIO. Fix the dependency to the config option MMC for declaring the requirement on provision of SDIO support. Fixes: 4b478bf6bdd8 ("wifi: libertas: drop 16-bit PCMCIA support") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231122083047.12774-1-lukas.bulwahn@gmail.com
2023-11-30wifi: rtw88: debug: remove wrapper of rtw_dbg()Ping-Ke Shih
Remove unnecessary wrapper of rtw_dbg(), and just call it directly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231122061429.34487-1-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-09-15 14:57:09 +0000