summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-12-21igc: Remove obsolete nvm typeSasha Neftin
i225 devices use only spi nvm type. This patch comes to tidy up obsolete nvm types. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove unused phy typeSasha Neftin
_phy_none type not in use. Clean up the code accordingly, and get rid of the unused enum line Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21igc: Remove unused _I_PHY_ID defineSasha Neftin
_I_PHY_ID not in use. Clean up the code accordingly, and get rid of the unused define Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: support crosstimestamping on E822 devices if supportedJacob Keller
E822 devices on supported platforms can generate a cross timestamp between the platform ART and the device time. This process allows for very precise measurement of the difference between the PTP hardware clock and the platform time. This is only supported if we know the TSC frequency relative to ART, so we do not enable this unless the boot CPU has a known TSC frequency (as required by convert_art_ns_to_tsc). Because PCIe PTM support is not available on all platforms, introduce CONFIG_ICE_HWTS and make it depend on X86 where we know the support exists. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: exit bypass mode once hardware finishes timestamp calibrationJacob Keller
Once the E822 device has sent and received one packet, the hardware computes the internal delay of the PHY using a process known as Vernier calibration. This calibration calculates a more accurate offset for the Tx and Rx timestamps. To make use of this offset, we need to exit the bypass mode. This cannot be done until the PHY has completed offset calibration, as indicated by the offset valid bits. To handle this, introduce a kthread work item which will poll the offset valid bits every few milliseconds seeing if it is safe to exit bypass mode. Once we have finished calibrating the offsets, we can program the total Tx and Rx offset registers and turn off the bypass bit. This allows the hardware to include the more precise vernier calibration offset, and improves the timestamp precision. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: ensure the hardware Clock Generation Unit is configuredJacob Keller
The E822 device has a Clock Generation Unit (CGU) responsible for determining the clock frequency that drives the timers. Ensure this function is initialized when bringing up the PTP support, so that the clock has a known frequency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: implement basic E822 PTP supportJacob Keller
Implement support for the basic operations needed to enable the PTP hardware clock on E822 devices. This includes implementations for the various PHY access functions, as well as the ability to start and stop the PHY timers. This is different from the E810 device because the configuration depends on link speed, so we cannot just start the PHYs immediately. We must wait until the link is up to get proper values for the speed based initialization. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: convert clk_freq capability into time_refJacob Keller
Convert the clk_freq value into the associated time_ref frequency value for E822 devices. This simplifies determining the time reference value for the clock. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: introduce ice_ptp_init_phc functionJacob Keller
When we enable support for E822 devices, there are some additional steps required to initialize the PTP hardware clock. To make this easier to implement as device-specific behavior, refactor the register setups in ice_ptp_init_owner to a new ice_ptp_init_phc function defined in ice_ptp_hw.c This function will have a common section, and an e810 specific sub-implementation. This will enable easily extending the functionality to cover the E822 specific setup required to initialize the hardware clock generation unit. It also makes it clear which steps are E810 specific vs which ones are necessary for all ice devices. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: use 'int err' instead of 'int status' in ice_ptp_hw.cJacob Keller
The ice_ptp_hw.c file introduced a bunch of uses of "int status" instead of the more traditional "int err" or "int ret". These are actually traditional Linux error codes (as opposed to the recently removed ice_status enumeration values). We're about to add a bunch of new functions to ice_ptp_hw.c. It's normally preferred in the ice driver to use "int ret" or "int err" when dealing with error code values. Instead of making the new functions use "int status" lets just fix all of ice_ptp_hw.c to use "int err". This will match the new functions and ensures a consistent style across at least the PTP related files. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: PTP: move setting of tstamp_configJacob Keller
The tstamp_config structure is being set inside of ice_ptp_cfg_timestamp, which is the function used to set Tx and Rx timestamping during initialization. This function is also used in order to set the PHY port timestamping status. However, it makes sense to always set the tstamp_config directly whenever the ice_set_tx_tstamp or ice_set_rx_tstamp functions are called. Move assignment of tstamp_config into the related functions and out of ice_ptp_cfg_timestamp. Now that we assign the timestamp mode in the relevant functions, we no longer modify the config value in ice_set_timestamp_mode. In turn, we no longer want to copy that config value into the PF cached structure. Instead, this is now the source of truth for actual configuration. On success of ice_set_timestamp_mode, copy the real configured mode back to report it out to userspace. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: introduce ice_base_incval functionJacob Keller
A future change will add additional possible increment values for the E822 device support. To handle this, we want to look up the increment value to use instead of hard coding it to the nominal value for E810 devices. Introduce ice_base_incval as a function to get the best nominal increment value to use. For now, it just returns the E810 value, but will be refactored in the future to look up the value based on the device type and configured clock frequency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21ice: Fix E810 PTP reset flowKarol Kolacinski
The PF reset does not reset PHC and PHY clocks so it's unnecessary to stop them and reinitialize after the reset. Configuring timestamping changes the VSI fields so it needs to be performed after VSIs are initialized, which was not done in case of a reset. Suggested-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pasi Vaananen <pvaanane@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-21Merge tag 'mac80211-next-for-net-next-2021-12-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have: * ndo_fill_forward_path support in mac80211, to let drivers use it * association comeback notification for userspace, to be able to react more sensibly to long delays * support for background radar detection hardware in some chipsets * SA Query Procedures offload on the AP side * more logging if we find problems with HT/VHT/HE * various cleanups and minor fixes Conflicts: net/wireless/reg.c: e08ebd6d7b90 ("cfg80211: Acquire wiphy mutex on regulatory work") 701fdfe348f7 ("cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface") https://lore.kernel.org/r/20211221111950.57ecc6a7@canb.auug.org.au drivers/net/wireless/ath/ath10k/wmi.c: 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel") 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel") https://lore.kernel.org/r/20211221115004.1cd6b262@canb.auug.org.au * tag 'mac80211-next-for-net-next-2021-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (32 commits) cfg80211: Enable regulatory enforcement checks for drivers supporting mesh iface rfkill: allow to get the software rfkill state cfg80211: refactor cfg80211_get_ies_channel_number() nl82011: clarify interface combinations wrt. channels nl80211: Add support to offload SA Query procedures for AP SME device nl80211: Add support to set AP settings flags with single attribute mac80211: add more HT/VHT/HE state logging cfg80211: Use the HE operation IE to determine a 6GHz BSS channel cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard mac80211: Notify cfg80211 about association comeback cfg80211: Add support for notifying association comeback mac80211: introduce channel switch disconnect function cfg80211: Fix order of enum nl80211_band_iftype_attr documentation cfg80211: simplify cfg80211_chandef_valid() mac80211: Remove a couple of obsolete TODO mac80211: fix FEC flag in radio tap header mac80211: use coarse boottime for airtime fairness code ieee80211: change HE nominal packet padding value defines cfg80211: use ieee80211_bss_get_elem() instead of _get_ie() mac80211: Use memset_after() to clear tx status ... ==================== Link: https://lore.kernel.org/r/20211221112532.28708-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-21iwlwifi: mei: wait before mapping the shared areaEmmanuel Grumbach
The shared area is a DMA memory allocated in the host and mapped so that the host and the CSME firmware can exchange data. It is mapped through a dedicated PCI device that is driven by the mei bus driver. The bus driver is in charge of allocating and mapping this memory. It also needs to configure the CSME firmware with a specific set of commands, so that the CSME firmware will know that this memory is meant to be used by its internal WLAN module. For this, the CSME firmware first needs to completely initialize its WLAN module and only then get the mapping request. The problem is that the mei bus enumeration completes before the WLAN is completely ready. This means that the WLAN module's initialization is racing with iwlmei's allocation and mapping flow. Testing showed a problem in resume flows where iwlmei was too fast and the DMA mapping failed. Add a delay to avoid this. This is still racy, but our measurements showed that we have a good margin and we should now be safe. Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211220142940.8b6279e3d0be.I6fe128b0b86149a85535104822c8355b367887c8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mei: clear the ownership when the driver goes downEmmanuel Grumbach
When the driver is unregistered, CSME will take ownership on the device. Reflect this in the iwlmei object so that we will remember to re-ask for ownership when the driver will register again. Not doing so will cause CSME not to give the host ownership and we will see the following error message when trying to bring up the interface: iwlwifi 0000:a9:00.0: iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter iwlwifi 0000:a9:00.0: iwl_pcie_set_hw_ready hardware not ready iwlwifi 0000:a9:00.0: iwl_pcie_set_hw_ready hardware not ready iwlwifi 0000:a9:00.0: iwl_pcie_prepare_card_hw Couldn't prepare the card but SAP is connected iwlwifi 0000:a9:00.0: Error while preparing HW: -16 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211220142940.c7bb5b7644df.I48498d9fd6e3959562205af67aa5f1a822eb762d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: yoyo: fix issue with new DBGI_SRAM region read.Mukesh Sisodiya
NIC has been grabbed for reading twice which is leading to NIC hang. Code correction are done for reading data with no grab function. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.55527214f8c9.I1748215ccb3fa20a3491a46a49b12e04eb560ac6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: fw: fix some scan kernel-docJohannes Berg
Some devices also use iwl_scan_config_v2 struct, so link it in the documentation for SCAN_CFG_CMD. Fix a bunch of kernel-doc as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.3331df94b106.If6c96b0d386e1c5988c8da6b69257e8f2e737f07@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQLuca Coelho
In some rare cases when the HW is in a bad state, we may get this interrupt when prph_info is not set yet. Then we will try to dereference it to check the sleep_notif element, which will cause an oops. Fix that by ignoring the interrupt if prph_info is not set yet. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: remove card state notification codeJohannes Berg
This notification ID was actually used for something else we never implemented, but luckily we only had some debug code here. Just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.a67b5b9db259.Ic55b306fcd2a3525b3993f4b7e00622dd95053ba@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: drop too short packets silentlyJohannes Berg
There's little value in this warning, we get a warning here if firmware passes us a short packet, particularly in monitor mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.305d12cf51ac.I2e4e6874113b1e5d8ee467b8a2d90820cc6ddde9@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: fix AUX ROC removalAvraham Stern
When IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD is set, removing a time event always tries to cancel session protection. However, AUX ROC does not use session protection so it was never removed. As a result, if the driver tries to allocate another AUX ROC event right after cancelling the first one, it will fail with a warning. In addition, the time event data passed to iwl_mvm_remove_aux_roc_te() is incorrect. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.915e1f69f062.Id837e917f1c2beaca7c1eb33333d622548918a76@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: return op_mode only in case the failure is from MEIMordechay Goodstein
Currently we always return the op_mode with valid pointer in case getting NVM failed, while it's only relevant for cases that CSME is the owner of the nic. Fix this by checking also who's the owner of the nic. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.b1e96021b616.Id0164855f2dd01ecdecf79b239d6ee5974882245@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: support Bz TX checksum offloadJohannes Berg
Support TX checksum offload for Bz devices, where we have full checksum offload (NETIF_F_HW_CSUM) and the hardware doesn't need to parse the IP headers or anything. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.c0f44c98b36d.I75a688f3ac80cbe824c459ece4bb67843b9fce76@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: add US/CA to TAS block list if OEM isn't allowedMiri Korenblit
If OEM isn't in the allowed list, TAS should be disabled in US/CA. Currently, if the OEM isn't allowed - we're sending the TAS only if we are not in US or CA. But this country check is done before we even know the country (usually the configuration is ZZ in that stage). So do the following instead: 1. Check if the current OEM is in the allowed list 2. If not - add US and CA to tas_block_list_array 3. Send the TAS table to FW. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: correctly set schedule scan profilesAyala Beker
Set scan offload profiles auth algorithms with valid algorithms only. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.525f2d468d22.I4d497d6a0a14ffb833f7edc7e980d26bbf8d7527@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: set protected flag only for NDP rangingAvraham Stern
Don't use protected ranging negotiation for FTM ranging as responders that support only FTM ranging don't expect the FTM request to be protected. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Fixes: 517a5eb9fab2 ("iwlwifi: mvm: when associated with PMF, use protected NDP ranging negotiation") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.f50ed0e3c6b3.Ibff247ee9d4e6e0a1a2d08a3c8a4bbb37e6829dd@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: pcie: add killer devices to the driverYaara Baruch
add killer subsystem devices from the 1675i and 1675s family to the driver. Signed-off-by: Yaara Baruch <yaara.baruch@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.2d5bec2d7b68.Icffb4e27390e6a5c76a0cbe7abf7472558f323d6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: perform 6GHz passive scan after suspendAvraham Stern
The 6GHz passive scan is performed only once every 50 minutes. However, in case of suspend/resume, the regulatory information is reset, so 6GHz channels may become disabled. Fix it by performing a 6GHz passive scan within 60 seconds after suspend/resume even if the 50 minutes timeout did not expire yet. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Fixes: e8fe3b41c3a3 ("iwlwifi: mvm: Add support for 6GHz passive scan") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.6d5c043372cf.I251dd5618a3f0b8febbcca788eb861f1cd6039bc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: correctly set channel flagsAyala Beker
In case of forced passive scan on a UHB channel, don't set the direct probe option for this channel. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0ede76a9ca92.Ie64a4df79ea9c485ae3d2fc043319e8f79cefa8e@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: always store the PPAG table as the latest version.Miri Korenblit
In case of a conflict between BIOS version and FW version of the PPAG table - the values arrive in the FW in the wrong places. This happens because we're storing the table in different structures depending on the BIOS version, not on the FW version, and so the FW doesn't get what it expect to. Always store the table in a v2 structure (which is a superset of v1 and v0). Also store the table in a structured way and in it's own structure, rather then storing it in the ppag command structure, similarly to the WRDS, EWRD and WGDS tables. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.793a509da7bd.Ia176746a28b816b5f788cce9a281139735909e2a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: bump FW API to 69 for AX devicesLuca Coelho
Start supporting API version 69 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.7d8fe0dffaea.I2de65c1efd9ab464d4158a3d852f73efe63024f8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: Fix calculation of frame lengthIlan Peer
The RADA might include in the Rx frame the MIC and CRC bytes. These bytes should be removed for non monitor interfaces and should not be passed to mac80211. Fix the Rx processing to remove the extra bytes on non monitor cases. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: test roc running status bits before removing the staNathan Errera
In some cases the sta is being removed twice since we do not test the roc aux running before removing it. Start looking at the bit before removing the sta. Signed-off-by: Nathan Errera <nathan.errera@intel.com> Fixes: 2c2c3647cde4 ("iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d5376ac6bcb0.Ic5f8470ea60c072bde9d1503e5f528b65e301e20@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: don't pass actual WGDS revision number in table_revisionLuca Coelho
The FW API for PER_CHAIN_LIMIT_OFFSET_CMD is misleading. The element name is table_rev, but it shouldn't actually contain the table revision number, but whether we should use the South Korea scheme or not. Fix the driver so that we only set this value to either 0 or 1. It will only be 1 (meaning South Korea) if the ACPI WGDS table revision is 1. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: 664c011b763e ("iwlwifi: acpi: support reading and storing WGDS revision 2") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.abed3b8119c7.I1fdc2c14577523fcffdfe8fb5902c2d8efde7e09@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: yoyo: support TLV-based firmware resetMukesh Sisodiya
Support resetting the firmware via TLV-based debugging. When applied, this will cause the driver to reset the firmware when the debugging is triggered. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d59b29653a1e.I7b3be4a1ad1a9d5d0e86259740e89ac113c9348b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: change old-SN drop thresholdJohannes Berg
Increment the threshold to avoid dropping too eagerly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0e947ed458c4.Ia376cbea5f59df4b4474f0bd33ab033e84535cce@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: don't trust hardware queue numberJohannes Berg
We don't really have much reason to mistrust the hardware queue number, but if it gets mixed up we still don't want to access some data out of bounds, so drop such frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.539aecb91247.I6e555a5185bad30d7d1a4659f9c0b99325425f18@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: handle RX checksum on Bz devicesJohannes Berg
On Bz devices, the hardware checksums including the SNAP header, starting directly after the MAC header, so we don't need the extra checks and can just pass the checksum to mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.8ef59da4e05e.Ide87c2dc8fa08eae55c013a625f4ece5184b1b63@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: use a define for checksum flags maskJohannes Berg
For the upcoming Bz devices, we will set NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. However, we still need to be able to remove all the checksum bits, so add a mask for the removal, and keep the old define for the feature advertisement. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.f05488ce8b83.I65bb83721498d8433e4ee2b09415eb74ab579445@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: remove module loading failure messageJohannes Berg
When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes when the opmode module cannot be loaded, due to completing the completion before using drv->dev, which can then already be freed. Fix this by removing the (fairly useless) message. Moving the completion later causes a deadlock instead, so that's not an option. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: isolate offload assist (checksum) calculationJohannes Berg
Isolate the entire calculation of the offload_assist field used for HW checksumming to the iwl_mvm_tx_csum function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.796ae29c90d9.Icb2f07905bebd9ed4537ca4c453069211ea71799@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: add support for OCE scanAvraham Stern
In case the fw supports OCE scan and one of the OCE feature flags are set in the scan request, set the corresponding flag in the firmware scan request. Note that new firmware that indicates OCE support does not support the probe deferral and suppression feature (which is optional). Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.3dd63c381839.Id79b39f650103bb9b851e31ed6a0178e81988587@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: fix leaks/bad data after failed firmware loadJohannes Berg
If firmware load fails after having loaded some parts of the firmware, e.g. the IML image, then this would leak. For the host command list we'd end up running into a WARN on the next attempt to load another firmware image. Fix this by calling iwl_dealloc_ucode() on failures, and make that also clear the data so we start fresh on the next round. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: fix debug TLV parsingJohannes Berg
Debug TLV parsing was missing size checks, so if a valid but too short TLV was encountered, it would attempt to read it. If the firmware file was arranged to be a multiple of pages long with this happening just before the end, it could crash reading out-of-bounds of a vmalloc area. Fix this by adding the relevant size check. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.84848da8067f.Ifb4f80c95d283ec62e495a7928069af711b5fee2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: mvm: fix 32-bit build in FTMJohannes Berg
On a 32-bit build, the division here needs to be done using do_div(), otherwise the compiler will try to call a function that doesn't exist, thus failing to build. Fixes: b68bd2e3143a ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219111352.e56cbf614a4d.Ib98004ccd2c7a55fd883a8ea7eebd810f406dec6@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: dump RCM error tablesJohannes Berg
There's another set of error tables on newer (Bz) hardware, support finding and dumping those error tables if present. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.c727a975b434.Ie5ad3fd974b700f1b90867b2b52ef7607799e8fe@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: dump both TCM error tables if presentJohannes Berg
There can be two TCMs in a given device, dump both of the error tables if present. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.887cba319301.Ifdc3f617f7e0e3e39c90e8c208e60f11b3bb9404@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: dump CSR scratch from outer functionJohannes Berg
We shouldn't dump this twice if we have two TCMs, and it really doesn't belong to the TCM dump anyway, so move this out. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.b58a02f27512.Idbfbc430776a7abda0eb086215fb64f2c9307ac0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-12-21iwlwifi: parse error tables from debug TLVsJohannes Berg
With more things being added, we're no longer going to duplicate the error tables from the debug TLVs nor send them at runtime. Use the debug TLVs to find the locations of the error tables. As we've never released firmware using IWL_UCODE_TLV_TCM_DEBUG_ADDRS just remove that entirely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.779d68490f68.I472c7d9cbaca46000a10ec18808ef54836b33a8a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 16:56:21 +0000