summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-07-16net/mlx5e: Do not request completion on every single UMR WQETariq Toukan
UMR WQEs are posted in bulks, and HW is notified once per a bulk. Reduce the number of completions by requesting such only for the last WQE of the bulk. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5e: RX, Avoid indirect call in representor CQE handlingTariq Toukan
Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call when/if CONFIG_RETPOLINE=y. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5e: XDP, Avoid indirect call in TX flowTariq Toukan
Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call when/if CONFIG_RETPOLINE=y. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5e: IPsec: Add Connect-X IPsec ESN update offload supportRaed Salem
Synchronize offloading device ESN with xfrm received SN by updating an existing IPsec HW context with the new SN. Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offloadRaed Salem
On receive flow inspect received packets for IPsec offload indication using the cqe, for IPsec offloaded packets propagate offload status and stack handle to stack for further processing. Supported statuses: - Offload ok. - Authentication failure. - Bad trailer indication. Connect-X IPsec does not use mlx5e_ipsec_handle_rx_cqe. For RX only offload, we see the BW gain. Below is the iperf3 performance report on two server of 24 cores Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz with ConnectX6-DX. We use one thread per IPsec tunnel. --------------------------------------------------------------------- Mode | Num tunnel | BW | Send CPU util | Recv CPU util | | (Gbps) | (Average %) | (Average %) --------------------------------------------------------------------- Cryto offload | 1 | 4.6 | 4.2 | 14.5 --------------------------------------------------------------------- Cryto offload | 24 | 38 | 73 | 63 --------------------------------------------------------------------- Non-offload | 1 | 4 | 4 | 13 --------------------------------------------------------------------- Non-offload | 24 | 23 | 52 | 67 Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5e: IPsec: Add IPsec steering in local NIC RXHuy Nguyen
Introduce decrypt FT, the RX error FT and the default rules. The IPsec RX decrypt flow table is pointed by the TTC (Traffic Type Classifier) ESP steering rules. The decrypt flow table has two flow groups. The first flow group keeps the decrypt steering rule programmed via the "ip xfrm s" interface. The second flow group has a default rule to forward all non-offloaded ESP packet to the TTC ESP default RSS TIR. The RX error flow table is the destination of the decrypt steering rules in the IPsec RX decrypt flow table. It has a fixed rule with single copy action that copies ipsec_syndrome to metadata_regB[0:6]. The IPsec syndrome is used to filter out non-ipsec packet and to return the IPsec crypto offload status in Rx flow. The destination of RX error flow table is the TTC ESP default RSS TIR. All the FTs (decrypt FT and error FT) are created only when IPsec SAs are added. If there is no IPsec SAs, the FTs are removed. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5: IPsec: Add HW crypto offload supportRaed Salem
This patch adds support for Connect-X IPsec crypto offload by implementing the IPsec acceleration layer needed routines, which delegates IPsec offloads to Connect-X routines. In Connect-X IPsec, a Security Association (SA) is added or deleted via allocating a HW context of an encryption/decryption key and a HW context of a matching SA (IPsec object). The Security Policy (SP) is added or deleted by creating matching Tx/Rx steering rules whith an action of encryption/decryption respectively, executed using the previously allocated SA HW context. When new xfrm state (SA) is added: - Use a separate crypto key HW context. - Create a separate IPsec context in HW to inlcude the SA properties: - aes-gcm salt. - ICV properties (ICV length, implicit IV). - on supported devices also update ESN. - associate the allocated crypto key with this IPsec context. Introduce a new compilation flag MLX5_IPSEC for it. Downstream patches will implement the Rx,Tx steering and will add the update esn. Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5: Accel, Add core IPsec support for the Connect-X familyRaed Salem
This to set the base for downstream patches to support the new IPsec implementation of the Connect-X family. Following modifications made: - Remove accel layer dependency from MLX5_FPGA_IPSEC. - Introduce accel_ipsec_ops, each IPsec device will have to support these ops. Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5: E-switch, Reduce dependency on num_vfs during mode setParav Pandit
Currently only ECPF allows enabling eswitch when SR-IOV is disabled. Enable PF also to enable eswitch when SR-IOV is disabled. Load VF vports when eswitch is already enabled. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5: E-switch, Avoid function change handler for non ECPFParav Pandit
for non ECPF eswitch manager function, vports are already enabled/disabled when eswitch is enabled/disabled respectively. Simplify function change handler for such eswitch manager function. Therefore, ECPF is the only one which remains PF/VF function change handler. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5: Make MLX5_EN_TLS non-promptTariq Toukan
TLS runs only over Eth, and the Eth driver is the only user of the core TLS functionality. There is no meaning of having the core functionality without the usage in Eth driver. Hence, let both TLS core implementations depend on MLX5_CORE_EN, and select MLX5_EN_TLS. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-16net/mlx5e: Fix build break when CONFIG_XPS is not setSaeed Mahameed
mlx5e_accel_sk_get_rxq is only used in ktls_rx.c file which already depends on XPS to be compiled, move it from the generic en_accel.h header to be local in ktls_rx.c, to fix the below build break In file included from ../drivers/net/ethernet/mellanox/mlx5/core/en_main.c:49:0: ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h: In function ‘mlx5e_accel_sk_get_rxq’: ../drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h:153:12: error: implicit declaration of function ‘sk_rx_queue_get’ ... int rxq = sk_rx_queue_get(sk); ^~~~~~~~~~~~~~~ Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reported-by: Randy Dunlap <rdunlap@infradead.org>
2020-07-16net/mlx5e: Fix missing switch_id for representorsParav Pandit
Cited commit in fixes tag missed to set the switch id of the PF and VF ports. Due to this flow cannot be offloaded, a simple command like below fails to offload with below error. tc filter add dev ens2f0np0 parent ffff: prio 1 flower \ dst_mac 00:00:00:00:00:00/00:00:00:00:00:00 skip_sw \ action mirred egress redirect dev ens2f0np0pf0vf0 Error: mlx5_core: devices are not on same switch HW, can't offload forwarding. Hence, fix it by setting switch id for each PF and VF representors port as before the cited commit. Fixes: 71ad8d55f8e5 ("devlink: Replace devlink_port_attrs_set parameters with a struct") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com>
2020-07-16net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configurationSergey Organov
From Documentation/networking/timestamping.txt: A driver which supports hardware time stamping shall update the struct with the actual, possibly more permissive configuration. Do update the struct passed when we upscale the requested time stamping mode. Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by: Sergey Organov <sorganov@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-16net: mscc: ocelot: rethink Kconfig dependencies againVladimir Oltean
Having the users of MSCC_OCELOT_SWITCH_LIB depend on REGMAP_MMIO was a bad idea, since that symbol is not user-selectable. So we should have kept a 'select REGMAP_MMIO'. When we do that, we run into 2 more problems: - By depending on GENERIC_PHY, we are causing a recursive dependency. But it looks like GENERIC_PHY has no other dependencies, and other drivers select it, so we can select it too: drivers/of/Kconfig:69:error: recursive dependency detected! drivers/of/Kconfig:69: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:68: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by MSCC_OCELOT_SWITCH_LIB drivers/net/ethernet/mscc/Kconfig:15: symbol MSCC_OCELOT_SWITCH_LIB is selected by MSCC_OCELOT_SWITCH drivers/net/ethernet/mscc/Kconfig:22: symbol MSCC_OCELOT_SWITCH depends on GENERIC_PHY drivers/phy/Kconfig:8: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3 drivers/phy/broadcom/Kconfig:41: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS drivers/net/phy/Kconfig:13: symbol MDIO_BUS depends on MDIO_DEVICE drivers/net/phy/Kconfig:6: symbol MDIO_DEVICE is selected by PHYLIB drivers/net/phy/Kconfig:254: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:19: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:25: symbol ARC_EMAC depends on OF_IRQ - By depending on PHYLIB, we are causing a recursive dependency. PHYLIB only has a single dependency, "depends on NETDEVICES", which we are already depending on, so we can again hack our way into conformance by turning the PHYLIB dependency into a select. drivers/of/Kconfig:69:error: recursive dependency detected! drivers/of/Kconfig:69: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:68: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by MSCC_OCELOT_SWITCH_LIB drivers/net/ethernet/mscc/Kconfig:15: symbol MSCC_OCELOT_SWITCH_LIB is selected by MSCC_OCELOT_SWITCH drivers/net/ethernet/mscc/Kconfig:22: symbol MSCC_OCELOT_SWITCH depends on PHYLIB drivers/net/phy/Kconfig:254: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:19: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:25: symbol ARC_EMAC depends on OF_IRQ Fixes: f4d0323bae4e ("net: mscc: ocelot: convert MSCC_OCELOT_SWITCH into a library") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16rtlwifi: rtl8192cu: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], just initialize this variable to NULL, and avoid sending garbage by returning. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: dc0313f46664 ("rtlwifi: rtl8192cu: Add routine hw") Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16b43: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. As a precursor to removing[2] this[3] macro[4], just initialize this variable to NULL. No later NULL deref is possible due to the early returns outside of the (phy->rev >= 7 && phy->rev < 19) case, which explicitly tests for NULL. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Fixes: 58619b14d106 ("b43: move under broadcom vendor directory") Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16net: fec: replace snprintf() with strlcpy() in fec_ptp_init()Sergey Organov
No need to use snprintf() on a constant string, nor using magic constant in the fixed code was a good idea. Signed-off-by: Sergey Organov <sorganov@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-16net: fec: get rid of redundant code in fec_ptp_set()Sergey Organov
Code of the form "if(x) x = 0" replaced with "x = 0". Code of the form "if(x == a) x = a" removed. Signed-off-by: Sergey Organov <sorganov@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-16net: fec: initialize clock with 0 rather than current kernel timeSergey Organov
Initializing with 0 makes it much easier to identify time stamps from otherwise uninitialized clock. Initialization of PTP clock with current kernel time makes little sense as PTP time scale differs from UTC time scale that kernel time represents. It only leads to confusion when no actual PTP initialization happens, as these time scales differ in a small integer number of seconds (37 at the time of writing.) Signed-off-by: Sergey Organov <sorganov@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-16net: fec: enable to use PPS feature without time stampingSergey Organov
PPS feature could be useful even when hardware time stamping of network packets is not in use, so remove offending check for this condition from fec_ptp_enable_pps(). Signed-off-by: Sergey Organov <sorganov@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-16net: fec: fix hardware time stamping by external devicesSergey Organov
Fix support for external PTP-aware devices such as DSA or PTP PHY: Make sure we never time stamp tx packets when hardware time stamping is disabled. Check for PTP PHY being in use and then pass ioctls related to time stamping of Ethernet packets to the PTP PHY rather than handle them ourselves. In addition, disable our own hardware time stamping in this case. Fixes: 6605b730c061 ("FEC: Add time stamping code and a PTP hardware clock") Signed-off-by: Sergey Organov <sorganov@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15net/mlx5: Enable count action for rules with allow actionMichael Guralnik
Enable the creation of rules with allow and count actions. This enables using counters on egress flow tables. Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-15net/mlx5: Support setting access rights of dma addressesEli Cohen
mlx5_fill_page_frag_array() is used to populate dma addresses to resources that require it, such as QPs, RQs etc. When the resource is used, PA list permissions are ignored. For resources that use MTT list, the user is required to provide the access rights. Subsequent patches use resources that require MTT lists, so modify API and implementation to support that. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-15ax88172a: fix ax88172a_unbind() failuresGeorge Kennedy
If ax88172a_unbind() fails, make sure that the return code is less than zero so that cleanup is done properly and avoid UAF. Fixes: a9a51bd727d1 ("ax88172a: fix information leak on short answers") Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15drivers: net: wan: Fix trivial spellingKieran Bingham
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptor -> descriptor Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: spectrum_acl: Offload FLOW_ACTION_POLICEIdo Schimmel
Offload action police when used with a flower classifier. The number of dropped packets is read from the policer and reported to tc. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: core_acl_flex_actions: Add police actionIdo Schimmel
Add core functionality required to support police action in the policy engine. The utilized hardware policers are stored in a hash table keyed by the flow action index. This allows to support policer sharing between multiple ACL rules. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: core_acl_flex_actions: Work around hardware limitationIdo Schimmel
In the policy engine, each ACL rule points to an action block where the ACL actions are stored. Each action block consists of one or more action sets. Each action set holds one or more individual actions, up to a maximum queried from the device. For example: Action set #1 Action set #2 +----------+ +--------------+ +--------------+ | ACL rule +----------> Action #1 | +-----> Action #4 | +----------+ +--------------+ | +--------------+ | Action #2 | | | Action #5 | +--------------+ | +--------------+ | Action #3 +------+ | | +--------------+ +--------------+ <---------+ Action block +-----------------> The hardware has a limitation that prevents a policing action (MLXSW_AFA_POLCNT_CODE when used with a policer, not a counter) from being configured in the same action set with a trap action (i.e., MLXSW_AFA_TRAP_CODE or MLXSW_AFA_TRAPWU_CODE). Note that the latter used to implement multiple actions: 'trap', 'mirred', 'drop'. Work around this limitation by teaching mlxsw_afa_block_append_action() to create a new action set not only when there is no more room left in the current set, but also when there is a conflict between previously mentioned actions. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: spectrum_policer: Add devlink resource supportIdo Schimmel
Expose via devlink-resource the maximum number of single-rate policers and their current occupancy. Example: $ devlink resource show pci/0000:01:00.0 ... name global_policers size 1000 unit entry dpipe_tables none resources: name single_rate_policers size 968 occ 0 unit entry dpipe_tables none Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: spectrum_policer: Add policer coreIdo Schimmel
Add common code to handle all policer-related functionality in mlxsw. Currently, only policer for policy engines are supported, but it in the future more policer families will be added such as CPU (trap) policers and storm control policers. The API allows different modules to add / delete policers and read their drop counter. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: resources: Add resource identifier for global policersIdo Schimmel
Add a resource identifier for maximum global policers so that it could be later used to query the information from firmware. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15mlxsw: reg: Add policer bandwidth limitsIdo Schimmel
Add policer bandwidth limits for both rate and burst size so that they could be enforced by a later patch. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15hinic: add firmware update supportLuo bin
add support to update firmware by the devlink flashing API Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15net: sundance: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15dpaa2-eth: check fsl_mc_get_endpoint for IS_ERR_OR_NULL()Ioana Ciornei
The fsl_mc_get_endpoint() function can return an error or directly a NULL pointer in case the peer device is not under the root DPRC container. Treat this case also, otherwise it would lead to a NULL pointer when trying to access the peer fsl_mc_device. Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15wireless: Fix trivial spellingKieran Bingham
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200715124839.252822-5-kieran.bingham+renesas@ideasonboard.com
2020-07-15iwlegacy: Check the return value of pcie_capability_read_*()Bolarinwa Olayemi Saheed
On failure pcie_capability_read_dword() sets it's last parameter, val to 0. However, with Patch 14/14, it is possible that val is set to ~0 on failure. This would introduce a bug because (x & x) == (~0 & x). This bug can be avoided without changing the function's behaviour if the return value of pcie_capability_read_dword is checked to confirm success. Check the return value of pcie_capability_read_dword() to ensure success. Suggested-by: Bjorn Helgaas <bjorn@helgaas.com> Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200713175529.29715-3-refactormyself@gmail.com
2020-07-15zd1211rw: remove needless check before usb_free_coherent()Xu Wang
usb_free_coherent() is safe with NULL addr and this check is not required. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200630070404.8207-1-vulab@iscas.ac.cn
2020-07-15rtlwifi: 8821ae: remove unused path B parameters from swing tablePing-Ke Shih
8821AE is a 1x1 chip, so swing parameters for path B aren't necessary. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629055843.25394-2-pkshih@realtek.com
2020-07-15rtlwifi: Use const in 8188ee/8723be/8821ae swing_table declarationsJoe Perches
Reduce data usage about 1KB by using const. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629055843.25394-1-pkshih@realtek.com
2020-07-15airo: use set_current_state macroXu Wang
Use set_current_state macro instead of current->state = TASK_RUNNING. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200702015701.8606-1-vulab@iscas.ac.cn
2020-07-15iwlegacy: remove redundant initialization of variable tidColin Ian King
The variable tid is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200701135221.549700-1-colin.king@canonical.com
2020-07-15ipw2200: use generic power managementVaibhav Gupta
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state(), which is not recommended. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629072525.156154-3-vaibhavgupta40@gmail.com
2020-07-15ipw2100: use generic power managementVaibhav Gupta
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. The driver was invoking PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state(), which is not recommended. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629072525.156154-2-vaibhavgupta40@gmail.com
2020-07-15adm8211: use generic power managementVaibhav Gupta
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. In the case of adm8211, after removing PCI helper functions, .suspend() and .resume() became empty-body functions. Hence, define them NULL and use dev_pm_ops. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629035031.169670-1-vaibhavgupta40@gmail.com
2020-07-15orinoco: use generic power managementVaibhav Gupta
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. The required operations are done by PCI core. PCI drivers are not expected to invoke PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_set_power_state(), etc. Their tasks are completed by PCI core itself. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200624174048.64754-1-vaibhavgupta40@gmail.com
2020-07-15rtl818x_pci: use generic power managementVaibhav Gupta
Earlier, drivers had to manage the device's power states, and related operations, themselves. With the generic approach, these are done by PCI core. The only driver-specific jobs, .suspend() and .resume() doing were invoking PCI helper functions pci_save/restore_state() and pci_set_power_state(). This is not recommeneded as PCI core takes care of that. Hence they became empty-body functions, thus define them NULL. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200623094454.12427-1-vaibhavgupta40@gmail.com
2020-07-15rtlwifi: rtl8192cu: Free ieee80211_hw if probing failsReto Schneider
In case of an error, no one will use the allocated structure. Call ieee80211_free_hw, same as in rtl_usb_disconnect. Signed-off-by: Reto Schneider <code@reto-schneider.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200622132113.14508-4-code@reto-schneider.ch
generated by cgit (git 2.34.1) at 2025-10-02 03:04:46 +0000