summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-09-20rtlwifi: rtl8192ee: Fix memory leak when loading firmwareLarry Finger
In routine rtl92ee_set_fw_rsvdpagepkt(), the driver allocates an skb, but never calls rtl_cmd_send_packet(), which will free the buffer. All other rtlwifi drivers perform this operation correctly. This problem has been in the driver since it was included in the kernel. Fortunately, each firmware load only leaks 4 buffers, which likely explains why it has not previously been detected. Cc: Stable <stable@vger.kernel.org> # 3.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rtlwifi: btcoexist: 23b 1ant: fix duplicated code for different branchesLarry Finger
A typo led to this issue, which was detected with the help of Coccinelle. In addition to fixing the error, the code is refactored to eliminate an if statement. Addresses-Coverity-ID: 1226788 Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20b43legacy: fix unitialized reads of ret by initializing the array to zeroColin Ian King
The u8 char array ret is not being initialized and elements outside the range start to end contain just garbage values from the stack. This results in a later scan of the array to read potentially uninitialized values. Fix this by initializing the array to zero. This seems to have been an issue since the very first commit. Detected by CoverityScan CID#139653 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20b43: fix unitialized reads of ret by initializing the array to zeroColin Ian King
The u8 char array ret is not being initialized and elements outside the range start to end contain just garbage values from the stack. This results in a later scan of the array to read potentially uninitialized values. Fix this by initializing the array to zero. This seems to have been an issue since the very first commit. Detected by CoverityScan CID#139652 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: fix a dereference on adapter before it has been null checkedColin Ian King
The assignment of dev is dereferencing adapter before adapter has been null checked, potentially leading to a null pointer dereference. Fix this by simply moving the assignment of dev to a later point after the sanity null check of adapter. Detected by CoverityScan CID#1398383 ("Dereference before null check") Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: miscellaneous changes for p2p modePrameela Rani Garnepudi
Add P2P_GO condition as well when handling BEACON_ENABLE from mac80211. Also passing 'vif' for auto rate request. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: aggregation changes for p2p modePrameela Rani Garnepudi
P2P Go condition is added wherever AP mode is there in aggregation path. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: disallow power save config when AP vap runningPrameela Rani Garnepudi
When AP or P2P GO VAP is running, power save configuration should be disallowed. To check interface type in power save configuration 'vif' parameters is passed. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: tx and rx path enhancements for p2p modePrameela Rani Garnepudi
Data descriptor is updated to include vap_id. TX command frame key config also updated to include vap_id. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: handle peer connection and disconnection in p2p modePrameela Rani Garnepudi
Parameter 'vif' is passed to inform_bss_status function to check the type of vif and to get vap_id. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: add support for p2p listenPrameela Rani Garnepudi
Remain-on-channel and cancel-remain-on-channel are implemented to support p2p listen phase. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: add/remove interface enhancements for p2pPrameela Rani Garnepudi
STA_OPMODE and AP_OPMODE macros are renamed to RSI_OPMODE_STA and RSI_OPMODE_AP. New opmodes are added to this list for P2P support. Mapping of mac80211 interface types to rsi interface types are added. Add and remove interface callbacks are handled for P2P mode. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: add p2p support parameters to mac80211Prameela Rani Garnepudi
This patch adds p2p supported parameters to mac80211 hw and wiphy structures during mac80211 registration. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20qtnfmac: cancel scans on wireless interface changesSergey Matyukevich
Cancel active scans and deactivate firmware scan watchdog timer when wireless interface configuration is changed. The usecases include wireless interface mode change, interface down, AP stop, virtual interface removal. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20qtnfmac: lock access to h/w in tx pathSergey Matyukevich
Fix tx path regression. Lock should be held when queuing packets to h/w fifos in order to properly handle configurations with multiple enabled interfaces. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20ieee802154: atusb: Driver for Busware HUL dongleJosef Filzmaier
Busware manufactured an USB dongle that is quite similar to the atben and rzusb USB dongles. that are already supported. This patch aims to support the Busware HUL dongle (called hulusb) alongside atusb and rzusb. hulusb is using the at86rf212 transceiver which is specifically designed to support the 700/800/900 MHz wave band. The source code is heavily inspired by the existing atusb and at86rf2xx drivers. Signed-off-by: Josef Filzmaier <j.filzmaier@gmx.at> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2017-09-20brcmfmac: setup passive scan if requested by user-spaceArend Van Spriel
The driver was not properly configuring firmware with regard to the type of scan. It always performed an active scan even when user-space was requesting for passive scan, ie. the scan request was done without any SSIDs specified. Cc: stable@vger.kernel.org # v4.0.x Reported-by: Huang, Jiangyang <Jiangyang.Huang@itron.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20brcmfmac: add length check in brcmf_cfg80211_escan_handler()Arend Van Spriel
Upon handling the firmware notification for scans the length was checked properly and may result in corrupting kernel heap memory due to buffer overruns. This fix addresses CVE-2017-0786. Cc: stable@vger.kernel.org # v4.0.x Cc: Kevin Cernekee <cernekee@chromium.org> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-19net: emac: Fix napi poll list corruptionChristian Lamparter
This patch is pretty much a carbon copy of commit 3079c652141f ("caif: Fix napi poll list corruption") with "caif" replaced by "emac". The commit d75b1ade567f ("net: less interrupt masking in NAPI") breaks emac. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers emac tries to do a last-ditch check and if there is more work it will call napi_reschedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in emac. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19team: fall back to hash if table entry is emptyJim Hanko
If the hash to port mapping table does not have a valid port (i.e. when a port goes down), fall back to the simple hashing mechanism to avoid dropping packets. Signed-off-by: Jim Hanko <hanko@drivescale.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: bcm_sf2: Utilize b53_{enable, disable}_portFlorian Fainelli
Export b53_{enable,disable}_port and use these two functions in bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions cannot be used without wrapping because we need to manage additional switch integration details (PHY, Broadcom tag etc.). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFPFlorian Fainelli
The magic number 8 in 3 locations in bcm_sf2_cfp.c actually designates the number of switch port egress queues, so use that define instead of open-coding it. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Export b53_imp_vlan_setup()Florian Fainelli
bcm_sf2 and b53 do exactly the same thing, so share that piece. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Wire-up EEEFlorian Fainelli
Add support for enabling and disabling EEE, as well as re-negotiating it in .adjust_link() and in .port_enable(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Move EEE functions to b53Florian Fainelli
Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared code amongst Gigabit capable switch, only 5325 and 5365 are too old to support that. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Define EEE register pageFlorian Fainelli
In preparation for migrating the EEE code from bcm_sf2 to b53, define the full EEE register page and offsets within that page. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Move Broadcom header setup to b53Florian Fainelli
The code to enable Broadcom tags/headers is largely switch independent, and in preparation for enabling it for multiple devices with b53, move the code we have in bcm_sf2.c to b53_common.c Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Use a macro to define I/O operationsFlorian Fainelli
Instead of repeating the same pattern: acquire mutex, read/write, release mutex, define a macro: b53_build_op() which takes the type (read|write), I/O size, and value (scalar or pointer). This helps with fixing bugs that could exist (e.g: missing barrier, lock etc.). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: bcm_sf2: Defer port enabling to calling port_enableFlorian Fainelli
There is no need to configure the enabled ports once in bcm_sf2_sw_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Defer port enabling to calling port_enableFlorian Fainelli
There is no need to configure the enabled ports once in b53_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Make b53_enable_cpu_port() take a port argumentFlorian Fainelli
In preparation for future changes allowing the configuring of multiple CPU ports, make b53_enable_cpu_port() take a port argument. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: dsa: b53: Remove is_cpu_port()Florian Fainelli
This is not used anywhere, so remove it. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: hns3: Fixes the premature exit of loop when matching clientsLipeng
When register/unregister ae_dev, ae_dev should match all client in the client_list. Enet and roce can co-exists together so we should continue checking for enet and roce presence together. So break should not be there. Above caused problems in loading and unloading of modules. Fixes: 38eddd126772 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: hns3: Fixes the default VLAN-id of PFLipeng
When there is no vlan id in the packets, hardware will treat the vlan id as 0 and look for the mac_vlan table. This patch set the default vlan id of PF as 0. Without this config, it will fail when look for mac_vlan table, and hardware will drop packets. Fixes: 6427264ef330 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Mingguang Qu <qumingguang@huawei.com> Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: hns3: Fixes the ether address copy with appropriate APISalil Mehta
This patch replaces the ethernet address copy instance with more appropriate ether_addr_copy() function. Fixes: 6427264ef330 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: hns3: Fixes the initialization of MAC address in hardwareLipeng
This patch fixes the initialization of MAC address, fetched from HNS3 firmware i.e. when it is not randomly generated, to the HNS3 hardware. Fixes: ca60906d2795 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: hns3: Fixes ring-to-vector map-and-unmap commandLipeng
This patch fixes the vector-to-ring map and unmap command and adds INT_GL(for, Gap Limiting Interrupts) and VF id to it as required by the hardware interface. Fixes: 6427264ef330 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: Mingguang Qu <qumingguang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: hns3: Fixes the command used to unmap ring from vectorLipeng
This patch fixes the IMP command being used to unmap the vector from the corresponding ring. Fixes: 6427264ef330 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: hns3: Fixes initialization of phy address from firmwareLipeng
Default phy address of every port is 0. Therefore, phy address for each port need to be fetched from firmware and device initialized with fetched non-default phy address. Fixes: 6427264ef330 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: spectrum: Add multicast router traps and trap groupsYotam Gigi
Add three new traps needed for multicast routing: - PIM: Trap for PIM protocol control packets. - RPF: Trap for packets that fail the RPF check on a specific hardware route entry. - MULTICAST: Generic trap for multicast. It is used for routes that trap the packets to the CPU. The RPF and MULTICAST traps have rate limiters as these traps may have line-rate of packets trapped. The PIM trap has a rate limiter similarly to other L3 control protocols. The rate limiters are implemented by adding three new trap groups for the newly introduced traps. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: spectrum_router: Export RIF dev access functionYotam Gigi
The mlxsw_sp_rif struct, defined as private struct in spectrum_router.c will be used in the multicast router source file. Due to the fact that the dev field will be needed by the multicast router logic, add an access function to it. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: reg: Configure RIF to forward IPv4 multicast packets by defaultYotam Gigi
Turn on two bits on the Spectrum RIF configuration: - IPv4 multicast: when a multicast packet arrives on a RIF, send it to go through multicast routes lookup. - IPv4 multicast forwarding enable: when multicast packet arrives on a RIF, allow it to be forwarded by multicast routes. If this bit is not set, multicast packets will go through multicast routing lookup but will be dropped at the egress of the ports. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: reg: Add Router Rules Copy RegisterYotam Gigi
The RRCR register is used for copying and moving TCAM multicast routes from different offsets. It will be used to allow routes relocation for parman ops as part of the multicast router offloading logic. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: reg: Add the Router Multicast Forwarding Table Version 2 registerYotam Gigi
The RMFT-V2 register is used to configure and query the multicast table and will be used by the multicast router offloading logic. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: resources: Add multicast ERIF list entries resourceYotam Gigi
The multicast ERIF list entries resource indicates the number of entries that can be put in one rigr2 register operation. While the register can hold up to MLXSW_REG_RIGR2_MAX_ERIFS ( = 32) ERIF entries, the actual number allowed by firmware is indicated with this resource. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: reg: Add the Router Interface Group Version 2 registerYotam Gigi
The RIGR-V2 register is used to add, remove and query egress interface list of a multicast forwarding entry and it will be used by the multicast router offloading logic. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: reg: Add The Router TCAM Allocation registerYotam Gigi
This register is used for allocation of regions in the TCAM table and it will be used by the multicast router offloading logic. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: reg: Rename the flexible action set length fieldYotam Gigi
The MLXSW_REG_PXXX_FLEX_ACTION_SET_LEN is relevant for the multicast router registers too, so rename it to have a general name which is not bound to a specific register. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: acl: Change trap ACL action to get the trap_id as a parameterYotam Gigi
Allow the trap ACL action to be configured with different traps. This allows the multicast router offloading code to use that same ACL action with the multicast router traps. By using different traps, the multicast router can have different trap policies and can handle the packet differently. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19mlxsw: acl: Introduce mcrouter ACL actionYotam Gigi
The Spectrum multicast forwarding is done using an ACL action. Add the mcrouter ACL action that will be used to offload the multicast router logic. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 12:51:50 +0000