| Age | Commit message (Collapse) | Author |
|---|
|
This function will be needed for genphy_c45_ethtool_get_eee() provided
by next patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KSZ8563R, which has same PHYID as KSZ9477 family, will change "EEE control
and capability 1" (Register 3.20) content depending on configuration of
"EEE advertisement 1" (Register 7.60). Changes on the 7.60 will affect
3.20 register.
So, instead of depending on register 3.20, driver should set supported_eee.
Proper supported_eee configuration is needed to make use of generic
PHY c45 set/get_eee functions provided by next patches.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add generic function for EEE abilities defined by IEEE 802.3
specification. For now following registers are supported:
- IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20)
- IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
(Register 1.2295)
Since I was not able to find any flag signaling support of these
registers, we should detect link mode abilities first and then based on
these abilities doing EEE link modes detection.
Results of EEE ability detection will be stored into new variable
phydev->supported_eee.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of KSZ9477 family switches provides EEE support. To enable it, we
just need to register set_mac_eee/set_mac_eee handlers and validate
supported chip version and port.
Currently supported chip variants are: KSZ8563, KSZ9477, KSZ9563,
KSZ9567, KSZ9893, KSZ9896, KSZ9897. KSZ8563 supports EEE only with
100BaseTX/Full. Other chips support 100BaseTX/Full and 1000BaseTX/Full.
Low Power Idle configuration is not supported and currently not
documented in the datasheets.
EEE PHY specific tunings are not documented in the switch datasheets, but can
overlap with KSZ9131 specification.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ionic device has on-board memory (CMB) that can be used
for descriptors as a way to speed descriptor access for faster
packet processing. It is rumored to improve latency and/or
packets-per-second for some profiles of small packet traffic,
although your mileage may vary.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor Code cleanup details.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have the pointer already, don't need to go through the
lif struct for it.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes the temporary scaffolding now that the comletion
function signature has been converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds temporary scaffolding so that the Crypto API
completion function can take a void * instead of crypto_async_request.
Once affected users have been converted this can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In bnxt_reserve_rings(), there is logic to check that the number of TX
rings reserved is enough to cover all the mqprio TCs, but it fails to
account for the TX XDP rings. So the check will always fail if there
are mqprio TCs and TX XDP rings. As a result, the driver always fails
to initialize after the XDP program is attached and the device will be
brought down. A subsequent ifconfig up will also fail because the
number of TX rings is set to an inconsistent number. Fix the check to
properly account for TX XDP rings. If the check fails, set the number
of TX rings back to a consistent number after calling netdev_reset_tc().
Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the remaining GSI register offset definitions. Use gsi_reg()
rather than the corresponding GSI_*_OFFSET() macros to get the
offsets for these registers, and get rid of the macros.
Note that we are now defining information for the HW_PARAM_2
register, and that doesn't appear until IPA v3.5.1.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The next patch adds a GSI register field that is only valid starting
at IPA v3.5.1. Create "gsi_v3.5.1.c" from "gsi_v3.1.c", changing
only the name of the public regs structure it defines.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add definitions of the offsets for IRQ-related GSI registers. Use
gsi_reg() rather than the corresponding GSI_CNTXT_*_OFFSET() macros
to get the offsets for these registers, and get rid of the macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add definitions of the offsets and strides for registers whose
offset depends on an event ring ID, and use gsi_reg() and its
returned value to determine offsets for these registers. Get
rid of the corresponding GSI_EV_CH_E_*_OFFSET() macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Continue populating with GSI register definitions, adding remaining
registers whose offset depends on a channel ID. Use gsi_reg() and
reg_n_offset() to determine offsets for those registers, and get rid
of the corresponding GSI_CH_C_*_OFFSET() macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a new register definition file in the "reg" subdirectory,
and begin populating it with GSI register definitions based on IPA
version. The GSI registers haven't changed much, so several IPA
versions can share the same GSI register definitions.
As with IPA registers, an array of pointers indexed by GSI register ID
refers to these register definitions, and a new "regs" field in the
GSI structure is initialized in gsi_reg_init() to refer to register
information based on the IPA version (though for now there's only
one). The new function gsi_reg() returns register information for
a given GSI register, and the result can be used to look up that
register's offset.
This patch is meant only to put the infrastructure in place, so only
eon register (CH_C_QOS) is defined for each version, and only the
offset and stride are defined for that register. Use new function
gsi_reg() to look up that register's information to get its offset,
This makes the GSI_CH_C_QOS_OFFSET() unnecessary, so get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a new gsi_reg_id enumerated type, which identifies each GSI
register with a symbolic identifier.
Create a function that indicates whether a register ID is valid.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a new source file "gsi_reg.c", and in it, introduce a new
function to encapsulate initializing GSI registers, including
looking up and I/O mapping their memory.
Create gsi_reg_exit() as the inverse of the init function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for PHC and timestamping operations for the lan8841 PHY.
PTP 1-step and 2-step modes are supported, over Ethernet and UDP both
ipv4 and ipv6.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for the following modes to the nfp driver:
NFP_MEDIA_10GBASE_LR
NFP_MEDIA_25GBASE_LR
NFP_MEDIA_25GBASE_ER
These modes are supported by the hardware and,
support for them was recently added to firmware.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported that act_len in kalmia_send_init_packet() is
uninitialized when passing it to the first usb_bulk_msg error path. Jiri
Pirko noted that it's pointless to pass it in the error path, and that
the value that would be printed in the second error path would be the
value of act_len from the first call to usb_bulk_msg.[1]
With this in mind, let's just not pass act_len to the usb_bulk_msg error
paths.
1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/
Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Reported-and-tested-by: syzbot+cd80c5ef5121bfe85b55@syzkaller.appspotmail.com
Signed-off-by: Miko Larsson <mikoxyzzz@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
iwlwifi updates towards v6.3, this patch-set contains:
* EHT rate reporting
* Sniffer support for EHT and a few fixes in the related code
* A few general cleanups and small bugfixes
* Bump FW API to 74 for AX devices
* Fix a compilation error in mei (it still depends on BROKEN)
* STEP equalizer support - transfer some Phy related parameters from
the BIOS to the firmware
|
|
The result of nlmsg_find_attr() 'br_spec' is dereferenced in
nla_for_each_nested(), but it can take NULL value in nla_find() function,
which will result in an error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209172833.3596034-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-09 (i40e)
Jan removes i40e_status from the driver; replacing them with standard
kernel error codes.
Kees Cook replaces 0-length array with flexible array.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
net/i40e: Replace 0-length array with flexible array
i40e: use ERR_PTR error print in i40e messages
i40e: use int for i40e_status
i40e: Remove string printing for i40e_status
i40e: Remove unused i40e status codes
====================
Link: https://lore.kernel.org/r/20230209172536.3595838-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the previous code, TX timestamp accuracy was bad because the irq
handler got the timestamp from the timestamp register at that time.
This hardware has "Timestamp capture" feature which can store
each TX timestamp into the timestamp descriptors. To improve
TX timestamp accuracy, implement timestamp descriptors' handling.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the previous code, the gptp flag was completely related to
the !dir_tx in struct rswitch_gwca_queue because
rswitch_gwca_queue_alloc() was called below:
< In rswitch_txdmac_alloc() >
err = rswitch_gwca_queue_alloc(ndev, priv, rdev->tx_queue, true, false,
TX_RING_SIZE);
So, dir_tx = true, and gptp = false.
< In rswitch_rxdmac_alloc() >
err = rswitch_gwca_queue_alloc(ndev, priv, rdev->rx_queue, false, true,
RX_RING_SIZE);
So, dir_tx = false, and gptp = true.
In the future, a new queue handling for timestamp will be implemented
and this gptp flag is confusable. So, remove the gptp flag.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To improve readability, move linkfix related variables to
struct rswitch_gwca. Also, rename function names "desc" with "linkfix".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To add a new ring which is really related to timestamp (ts_ring)
in the future, rename the following members to improve readability:
ring --> tx_ring
ts_ring --> rx_ring
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Incrementation of xsk_frames inside the for-loop produces
infinite loop, if we have both normal AF_XDP-TX and XDP_TXed
buffers to complete.
Split xsk_frames into 2 variables (xsk_frames and completed_frames)
to eliminate this bug.
Fixes: 29322791bc8b ("ice: xsk: change batched Tx descriptor cleaning")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209160130.1779890-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function always returns success. We need to preserve the error
code before setting rx_ring->page_pool = NULL.
Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y+T4aoefc1XWvGYb@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A new user of MSCC_OCELOT_SWITCH_LIB was added, bringing back an old
link failure that was fixed with e5f31552674e ("ethernet: fix
PTP_1588_CLOCK dependencies"):
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_ptp_enable':
ocelot_ptp.c:(.text+0x8ee): undefined reference to `ptp_find_pin'
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_get_ts_info':
ocelot_ptp.c:(.text+0xd5d): undefined reference to `ptp_clock_index'
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_init_timestamp':
ocelot_ptp.c:(.text+0x15ca): undefined reference to `ptp_clock_register'
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_deinit_timestamp':
ocelot_ptp.c:(.text+0x16b7): undefined reference to `ptp_clock_unregister'
Add the same PTP dependency here, as well as in the MSCC_OCELOT_SWITCH_LIB
symbol itself to make it more obvious what is going on when the next
driver selects it.
Fixes: 3d7316ac81ac ("net: dsa: ocelot: add external ocelot switch control")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20230209124435.1317781-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In TI's AM62x/AM64x SoCs, successful teardown of RX DMA Channel raises an
interrupt. The process of servicing this interrupt involves flushing all
pending RX DMA descriptors and clearing the teardown completion marker
(TDCM). The am65_cpsw_nuss_rx_packets() function invoked from the RX
NAPI callback services the interrupt. Thus, it is necessary to wait for
this handler to run, drain all packets and clear TDCM, before calling
napi_disable() in am65_cpsw_nuss_common_stop() function post channel
teardown. If napi_disable() executes before ensuring that TDCM is
cleared, the TDCM remains set when the interfaces are down, resulting in
an interrupt storm when the interfaces are brought up again.
Since the interrupt raised to indicate the RX DMA Channel teardown is
specific to the AM62x and AM64x SoCs, add a quirk for it.
Fixes: 4f7cce272403 ("net: ethernet: ti: am65-cpsw: add support for am64x cpsw3g")
Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230209084432.189222-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d01 ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename functions related to register fields so they don't appear to
be IPA-specific, and move their definitions into "reg.h":
ipa_reg_fmask() -> reg_fmask()
ipa_reg_bit() -> reg_bit()
ipa_reg_field_max() -> reg_field_max()
ipa_reg_encode() -> reg_encode()
ipa_reg_decode() -> reg_decode()
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename ipa_reg_offset() to be reg_offset() and move its definition
to "reg.h". Rename ipa_reg_n_offset() to be reg_n_offset() also.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPA register definitions have evolved with each new version. The
changes required to support more than 32 endpoints in IPA v5.0 made
it best to define a unified mechanism for defining registers and
their fields.
GSI register definitions, meanwhile, have remained fairly stable.
And even as the total number of IPA endpoints goes beyond 32, the
number of GSI channels on a given EE that underly endpoints still
remains 32 or less.
Despite that, GSI v3.0 (which is used with IPA v5.0) extends the
number of channels (and events) it supports to be about 256, and as
a result, many GSI register definitions must change significantly.
To address this, we'll use the same "ipa_reg" mechanism to define
the GSI registers.
As a first step in generalizing the "ipa_reg" to also support GSI
registers, isolate the definitions of the "ipa_reg" and "ipa_regs"
structure types (and some supporting macros) into a new header file,
and remove the "ipa_" and "IPA_" from symbol names.
Separate the IPA register ID validity checking from the generic
check that a register ID is in range. Aside from that, this is
intended to have no functional effect on the code.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move some static inline function definitions out of "gsi_reg.h" and
into "gsi.c", which is the only place they're used. Rename them so
their names identify the register they're associated with.
Move the gsi_channel_type enumerated type definition below the
offset and field definitions for the CH_C_CNTXT_0 register where
it's used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are seven GSI interrupt types that can be signaled by a single
GSI IRQ. These are represented in a bitmask, and the gsi_irq_type_id
enumerated type defines what each bit position represents.
Similarly, the global and general GSI interrupt types each has a set
of conditions it signals, and both types have an enumerated type
that defines which bit that represents each condition.
When used, these enumerated values are passed as an argument to BIT()
in *all* cases. So clean up the code a little bit by defining the
enumerated type values as one-bit masks rather than bit positions.
Rename gsi_general_id to be gsi_general_irq_id for consistency.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When checking the validity of an IPA register ID, compare it against
all possible ipa_reg_id values.
Rename the function ipa_reg_id_valid() to be specific about what's
being checked.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Soon IPA v5.0+ will be supported, and when that happens we will be
able to enable support for the SDX65 (IPA v5.0), SM8450 (IPA v5.1),
and SM8550 (IPA v5.5).
Fix the comment about the GSI version used for IPA v3.1.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The reg_addr field in the IPA structure is set but never used.
Get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Starting at IPA v4.11, the GSI_GENERIC_COMMAND GSI register got a
new PARAMS field. The code that encodes a value into that field
sets it unconditionally, which is wrong.
We currently only provide 0 as the field's value, so this error has
no real effect. Still, it's a bug, so let's fix it.
Fix an (unrelated) incorrect comment as well. Fields in the
ERROR_LOG GSI register actually *are* defined for IPA versions
prior to v3.5.1.
Fixes: fe68c43ce388 ("net: ipa: support enhanced channel flow control")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the following TC flower filter keys to lan966x for IS2:
- ipv4_addr (sip and dip)
- ipv6_addr (sip and dip)
- control (IPv4 fragments)
- portnum (tcp and udp port numbers)
- basic (L3 and L4 protocol)
- vlan (outer vlan tag info)
- tcp (tcp flags)
- ip (tos field)
As the parsing of these keys is similar between lan966x and sparx5, move
the code in a separate file to be shared by these 2 chips. And put the
specific parsing outside of the common functions.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit b3973bb40041 ("vmxnet3: set correct hash type based on
rss information") added hashType information into skb. However,
rssType field is populated for eop descriptor. This can lead
to incorrectly reporting of hashType for packets which use
multiple rx descriptors. Multiple rx descriptors are used
for Jumbo frame or LRO packets, which can hit this issue.
This patch moves the RSS codeblock under eop descritor.
Cc: stable@vger.kernel.org
Fixes: b3973bb40041 ("vmxnet3: set correct hash type based on rss information")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Peng Li <lpeng@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Link: https://lore.kernel.org/r/20230208223900.5794-1-doshir@vmware.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove unused bulk clocks struct from the miic state and use an already
existing miic variable in miic_config().
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20230208161249.329631-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for cable diagnostics in lan8841 PHY. It has the same
registers layout as lan8814 PHY, therefore reuse the functionality.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230208114406.1666671-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPsec offloading callbacks may be called in atomic context, sleep is
not allowed in the implementation. Now use workqueue mechanism to
avoid this issue.
Extend existing workqueue mechanism for multicast configuration only
to universal use, so that all configuring through mailbox asynchronously
can utilize it.
Fixes: 859a497fe80c ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mailbox configuration mechanism requires writing several registers,
which shouldn't be interrupted, so need lock to avoid race condition.
The base offset of mailbox configuration registers is not fixed, it
depends on TLV caps read from application firmware.
Fixes: 859a497fe80c ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Code blocks handling BCMA_CHIP_ID_BCM5357 and BCMA_CHIP_ID_BCM53572 were
incorrectly unified. Chip package values are not unique and cannot be
checked independently. They are meaningful only in a context of a given
chip.
Packages BCM5358 and BCM47188 share the same value but then belong to
different chips. Code unification resulted in treating BCM5358 as
BCM47188 and broke its initialization.
Link: https://github.com/openwrt/openwrt/issues/8278
Fixes: cb1b0f90acfe ("net: ethernet: bgmac: unify code of the same family")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230208091637.16291-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add IPsec offloading support for NFP3800. Include data
plane and control plane.
Data plane: add IPsec packet process flow in NFP3800
datapath (NFDk).
Control plane: add an algorithm support distinction flow
in xfrm hook function xdo_dev_state_add(), as NFP3800 has
a different set of IPsec algorithm support.
This matches existing support for the NFP6000/NFP4000 and
their NFD3 datapath.
In addition, fixup the md_bytes calculation for NFD3 datapath
to make sure the two datapahts are keept in sync.
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230208091000.4139974-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
