summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-10-12igb: Loopback functionality supports for i350 devicesAkeem G. Abodunrin
This patch adds VMDq loopback pf support for i350 devices. The patch is necessary since the register that enabled loopback was moved and renamed from DTXSWC to TXSWC. Signed-off-by: "Akeem G. Abodunrin" <akeem.g.abodunrin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12igb: fix static function warnings reported by sparseEmil Tantilov
igb_update/validate_nvm_checksum_with_offset() should be static. Also removes unneeded prototypes for the above functions. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12igb: Add workaround for byte swapped VLAN on i350 local trafficAlexander Duyck
On i350 when traffic is looped back from a VF to the PF the value is byte swapped from the normal format. In order to address this we need to add a flag indicating that the ring will need to byte swap the loopback packets prior to processing them. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12igb: Drop unnecessary write of E1000_IMS from igb_msix_otherAlexander Duyck
Since we mask interrupts in EIMS not in IMS there is no need to re-enable mask bits in that register. As such we can remove the write to IMS from the end of igb_msix_other. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12igb: Fix features that are currently 82580 only and should also be i350Alexander Duyck
This change allows support for per packet timesync and global device reset on the i350 adapter. These features were supported on both 82580 and i350 however it looks like several checks where not updated and as such the i350 support was not enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12igb: Make certain one vector is always assigned in igb_request_irqAlexander Duyck
This change makes certain that one interrupt is always initialized in igb_request_irq. In addition we drop the use of adapter->pdev and instead just call pdev since we made a local copy of the pointer earlier in the function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12igb: avoid unnecessarily creating a local copy of the q_vectorAlexander Duyck
This is mostly a drop of unnecessary pointer defines for q_vector when we don't have issues with line width and don't have multiple references to the pointer. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12ixgbe: Correct check for change in FCoE priorityMark Rustad
Correct a check for change in FCoE priority when IEEE mode DCB is in use. In IEEE mode a different function has to be used to get the FCoE priority mask. Also, the check for the mask assumed that only one priority was set. In case there should be more than one, check just the bit. These changes help avoid link flapping issues that can come up when IEEE DCB is in use. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12ixgbe: Add FCoE DDP allocation failure counters to ethtool stats.Amir Hanania
Add 2 new counters to ethtool: 1. Count DDP allocation failure since we max the number of buffers allowed in one DDP context. 2. Count DDP allocation failure since we max the number of buffers allowed in one DDP context when we alloc an extra buffer. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12ixgbe: Add protection from VF invalid target DMAGreg Rose
It is possible for a VF to set an invalid target DMA address in its Tx/Rx descriptor buffer pointers. The workarounds in this patch will guard against such an event and issue a VFLR to the VF in response. The VFLR will shut down the VF until an administrator can take action to investigate the event and correct the problem. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-12net: wireless: brcm80211: replace ndo_set_multicast_list with ndo_set_rx_modeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mwifiex: add support for Marvell pcie8766 chipsetAmitkumar Karwar
This patch supports 88W8766P chipset with a PCIe interface. The corresponding firmware image file is located at: "mrvl/pcie8766_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: only send FCS-fail packets to mac80211 if requestedFelix Fietkau
Prevents lots of broken frames from showing up on monitor interfaces by default. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: fix a regression in key miss handlingFelix Fietkau
The commit "ath9k_hw: Fix incorrect key_miss handling" changed the code to only report key miss errors if a MIC error wasn't reported. When checking the flags in that order in the MAC code, it might miss some real events, because the value of the MIC error flag is undefined under some conditions. The primary issue addressed by the previous commit is making sure that MIC errors are properly reported on the STA side. This can be fixed in a better way by adding a separate rx status flag for key miss and ignoring it for multicast frames. This fix slightly improves stability in AP mode on some older hardware, like AR9132. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: remove EEP_REG_1Felix Fietkau
It was previously used for current_rd_ext Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath: remove ath_regulatory::current_rd_extFelix Fietkau
It is unused since the previous dead code that was using it had been removed earlier. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: clean up tx power handlingFelix Fietkau
The code for handling various restrictions concerning regulatory limits, antenna gain, etc. is very convoluted and duplicated across various EEPROM parsing implementations, making it hard to review. This patch partially cleans up the mess by unifying regulatory limit handling in one function and simplifying handling of antenna gain. It also removes unused transmit power scaling arrays from the EEPROM code, which belonged to an unimplemented API that isn't supposed to be in the driver anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k_hw: make ath9k_hw_set_interrupts use ah->imask by defaultFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: disable unnecessary PHY error reportingFelix Fietkau
PHY errors relevant for ANI are always tracked by hardware counters, the bits that allow them to pass through the rx filter are independent of that. Enabling PHY errors in the rx filter often creates lots of useless DMA traffic and might be responsible for some of the rx dma stop failure warnings. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11b43: trivial: do not report any link quality instead of invalid oneRafał Miłecki
We don't want to report random quality info (new PHYs are affected). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11rtlwifi: Change debug parameter to apply to individual driversLarry Finger
The current debug parameter is applied to rtlwifi, which means that all loaded drivers have the same level of debugging applied. In addition, the previous method requires a two-step load process to enable debugging. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: fix retry counting / BAR handling during queue flushFelix Fietkau
When tx is suspended temporarily and the queue is flushed, do not increase the retry count or attempt to send out BAR frames. Instead simply retry the affected subframes normally after the reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: improve PS filter clearing and retry counting for A-MPDUFelix Fietkau
Do not increment the retry counter if packets to a sleeping station were not sent because of tx failure, instead of only checking the filter flag. Clear the PS filter only after an A-MPDU was reported as filtered, otherwise the hardware might do some unnecessary extra retransmissions. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: keep track of what's triggering hardware resetsFelix Fietkau
Export how many times each of the reset triggers has fired through debugfs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: indicate which queues are blocked when stopping tx failsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11mwifiex: fix smatch errorsYogesh Ashok Powar
drivers/net/wireless/mwifiex/main.c +828 mwifiex_remove_card(52) error: potential null derefence 'priv'. drivers/net/wireless/mwifiex/main.c +828 mwifiex_remove_card(52) error: we previously assumed 'priv' could be null (see line 820) drivers/net/wireless/mwifiex/txrx.c +90 mwifiex_process_tx(24) error: potential null derefence 'local_tx_pd'. drivers/net/wireless/mwifiex/sta_ioctl.c +766 mwifiex_rate_ioctl_set_rate_value(30) error: buffer overflow 'rate' 14 <= 14 Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath9k: remove some bogus error handling codeDan Carpenter
If "axq_qnum >= ARRAY_SIZE(sc->tx.txq)", then the call to ath9k_hw_releasetxqueue() would read beyond the end of the ah->txq[] array and possibly corrupt memory. Fortunately, ath9k_hw_setuptxqueue() doesn't return high values of "axq_qnum" and this code can be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11ath5k: remove some unneeded error handling codeDan Carpenter
th5k_hw_setup_tx_queue() returns a valid offset into the ah->ah_txq[] array. The ah->ah_txq[] and the ah->txqs[] array are the same size. Both have AR5K_NUM_TX_QUEUES elements. So this error handling code will never trigger. Also it's wrong. The call to ath5k_hw_release_tx_queue() with a qnum of AR5K_NUM_TX_QUEUES or more will just trigger a WARN_ON() and return. Or if it missed the WARN_ON(), it would just corrupt some memory and return. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11iwlagn: separate init calib and rt calibWey-Yi Guy
My previous patch for init calib cfg disable a set of calibration for both init and runtime which cause performance issue, Fix it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11Merge branch 'for-linville' of git://github.com/lucacoelho/wl12xxJohn W. Linville
2011-10-11net: wireless: add brcm80211 driversArend van Spriel
Add the brcm80211 tree to drivers/net/wireless, and disable the version that's in drivers/staging. This version includes the sources currently in staging, plus any changes that have been sent out for review. Sources in staging will be deleted in a followup patch. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11Merge branch 'for-davem' of git://git.infradead.org/users/linville/wireless-nextDavid S. Miller
2011-10-11Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: Documentation/feature-removal-schedule.txt
2011-10-11ath6kl: fixup merge damage in ath6kl_mgmt_txJohn W. Linville
CC [M] drivers/net/wireless/ath/ath6kl/cfg80211.o drivers/net/wireless/ath/ath6kl/cfg80211.c:1838:2: warning: initialization from incompatible pointer type Caused by commit e9f935e3e8dc0bddd0df6d148165d95925422502... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller
2011-10-11Fix file references in Kconfig filesJohann Felix Soden
This patch fixes file references to moved or deleted files outside of Documentation/. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-10ll_temac: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10emac: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10ehea: convert to SKB paged frag APIIan Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Breno Leitao <leitao@linux.vnet.ibm.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10mscan: too much data copied to CAN frame due to 16 bit accessesWolfgang Grandegger
Due to the 16 bit access to mscan registers there's too much data copied to the zero initialized CAN frame when having an odd number of bytes to copy. This patch ensures that only the requested bytes are copied by using an 8 bit access for the remaining byte. Reported-by: Andre Naujoks <nautsch@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10bnx2x: fix cl_id allocation for non-eth clients for NPAR modeDmitry Kravkov
There are some consolidations of NPAR configuration when FCoE and iSCSI L2 clients will get the same id, in this case FCoE ring will be non-functional. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10mlx4_en: fix endianness with blue frame supportThadeu Lima de Souza Cascardo
The doorbell register was being unconditionally swapped. In x86, that meant it was being swapped to BE and written to the descriptor and to memory, depending on the case of blue frame support or writing to doorbell register. On PPC, this meant it was being swapped to LE and then swapped back to BE while writing to the register. But in the blue frame case, it was being written as LE to the descriptor. The fix is not to swap doorbell unconditionally, write it to the register as BE and convert it to BE when writing it to the descriptor. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Reported-by: Richard Hendrickson <richhend@us.ibm.com> Cc: Eli Cohen <eli@dev.mellanox.co.il> Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09r6040: bump version to 0.28 and date to 07Oct2011.Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09r6040: invoke phy_{start,stop} when appropriateFlorian Fainelli
Joe reported to me that right after a bring up of a r6040 interface the ethtool output had no consistent output with respect to link duplex and speed. Fix this by adding a missing phy_start call in r6040_up and conversely a phy_stop call in r6040_down to properly initialize phy states. Reported-by: Joe Chou <Joe.Chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Adding 40gb speed report for ethtoolAlexander Guller
Query port will now identify a 40G Ethernet speed. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Fix crash upon device initialization errorAlexander Guller
Netdevice was being freed without being unregistered first if mlx4_SET_PORT_general or mlx4_INIT_PORT failed. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Fix QP number calculation according to module paramAlexander Guller
Number of bits taken from mac table index in QP calculation should be based on log_num_mac parameter. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Added missing iounmap upon releasing a deviceAlexander Guller
Fixed a memory leak caused by missing iounmap when device is being released. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Sharon Cohen <sharonc@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Adjusting moderation per each ringAlexander Guller
Moderation is now done per ring and coalescing is enabled by set_ring_param in ethtool. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Removing reserve vectorsAlexander Guller
Fixed a bug where ring size change caused insufficient memory upon driver restart due to unreleased EQs. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 05:57:52 +0000