| Age | Commit message (Collapse) | Author |
|---|
|
Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining
GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
register. It helped bring this register into a well-defined state so the
driver has to rely less on the bootloader to do things right.
Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
possibility to configure it. Upon further testing it turns out that all
boards which are supported by the GSWIP driver in OpenWrt which use an
RMII PHY have a dedicated oscillator on the board which provides the
50MHz RMII reference clock.
Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
the MAC also generates the RMII reference clock whose signal then
conflicts with the signal from the oscillator on the board. This results
in a constant cycle of the PHY detecting link up/down (and as a result
of that: the two ports using the AR8030 PHYs are not working).
At the time of writing this patch there's no known board where the MAC
(GSWIP) has to generate the RMII reference clock. If needed this can be
implemented in future by providing a device-tree flag so the
GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.
Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits")
Tested-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix spelling in comment.
Fixes: 94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Link: https://lore.kernel.org/r/20220425154856.169499-1-marcel@ziswiler.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The only remaining definitions of __SLOW_DOWN_IO (for alpha and ia64) do
nothing, and the only mentions in networking are in comments. Remove these
mentions.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
atp.h is included only by atp.c, which does not use eeprom_delay(). Remove
the unused definition.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Golle reports that the conversion of mt753x to phylink PCS caused
an oops as below.
The problem is with the placement of the PCS initialisation, which
occurs after mt7531_setup() has been called. However, burited in this
function is a call to setup the CPU port, which requires the PCS
structure to be already setup.
Fix this by changing the initialisation order.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Mem abort info:
ESR = 0x96000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=0000000046057000
[0000000000000020] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 96000005 [#1] SMP
Modules linked in:
CPU: 0 PID: 32 Comm: kworker/u4:1 Tainted: G S 5.18.0-rc3-next-20220422+ #0
Hardware name: Bananapi BPI-R64 (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mt7531_cpu_port_config+0xcc/0x1b0
lr : mt7531_cpu_port_config+0xc0/0x1b0
sp : ffffffc008d5b980
x29: ffffffc008d5b990 x28: ffffff80060562c8 x27: 00000000f805633b
x26: ffffff80001a8880 x25: 00000000000009c4 x24: 0000000000000016
x23: ffffff8005eb6470 x22: 0000000000003600 x21: ffffff8006948080
x20: 0000000000000000 x19: 0000000000000006 x18: 0000000000000000
x17: 0000000000000001 x16: 0000000000000001 x15: 02963607fcee069e
x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101
x11: ffffffc037302000 x10: 0000000000000870 x9 : ffffffc008d5b800
x8 : ffffff800028f950 x7 : 0000000000000001 x6 : 00000000662b3000
x5 : 00000000000002f0 x4 : 0000000000000000 x3 : ffffff800028f080
x2 : 0000000000000000 x1 : ffffff800028f080 x0 : 0000000000000000
Call trace:
mt7531_cpu_port_config+0xcc/0x1b0
mt753x_cpu_port_enable+0x24/0x1f0
mt7531_setup+0x49c/0x5c0
mt753x_setup+0x20/0x31c
dsa_register_switch+0x8bc/0x1020
mt7530_probe+0x118/0x200
mdio_probe+0x30/0x64
really_probe.part.0+0x98/0x280
__driver_probe_device+0x94/0x140
driver_probe_device+0x40/0x114
__device_attach_driver+0xb0/0x10c
bus_for_each_drv+0x64/0xa0
__device_attach+0xa8/0x16c
device_initial_probe+0x10/0x20
bus_probe_device+0x94/0x9c
deferred_probe_work_func+0x80/0xb4
process_one_work+0x200/0x3a0
worker_thread+0x260/0x4c0
kthread+0xd4/0xe0
ret_from_fork+0x10/0x20
Code: 9409e911 937b7e60 8b0002a0 f9405800 (f9401005)
---[ end trace 0000000000000000 ]---
Reported-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Fixes: cbd1f243bc41 ("net: dsa: mt7530: partially convert to phylink_pcs")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/E1nj6FW-007WZB-5Y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During ice_sriov_configure, if num_vfs is 0, we are being asked by the
kernel to remove all VFs.
The driver first de-initializes the snapshot before freeing all the VFs.
This results in a use-after-free BUG detected by KASAN. The bug occurs
because the snapshot can still be accessed until all VFs are removed.
Fix this by freeing all the VFs first before calling
ice_mbx_deinit_snapshot.
[ +0.032591] ==================================================================
[ +0.000021] BUG: KASAN: use-after-free in ice_mbx_vf_state_handler+0x1c3/0x410 [ice]
[ +0.000315] Write of size 28 at addr ffff889908eb6f28 by task kworker/55:2/1530996
[ +0.000029] CPU: 55 PID: 1530996 Comm: kworker/55:2 Kdump: loaded Tainted: G S I 5.17.0-dirty #1
[ +0.000022] Hardware name: Dell Inc. PowerEdge R740/0923K0, BIOS 1.6.13 12/17/2018
[ +0.000013] Workqueue: ice ice_service_task [ice]
[ +0.000279] Call Trace:
[ +0.000012] <TASK>
[ +0.000011] dump_stack_lvl+0x33/0x42
[ +0.000030] print_report.cold.13+0xb2/0x6b3
[ +0.000028] ? ice_mbx_vf_state_handler+0x1c3/0x410 [ice]
[ +0.000295] kasan_report+0xa5/0x120
[ +0.000026] ? __switch_to_asm+0x21/0x70
[ +0.000024] ? ice_mbx_vf_state_handler+0x1c3/0x410 [ice]
[ +0.000298] kasan_check_range+0x183/0x1e0
[ +0.000019] memset+0x1f/0x40
[ +0.000018] ice_mbx_vf_state_handler+0x1c3/0x410 [ice]
[ +0.000304] ? ice_conv_link_speed_to_virtchnl+0x160/0x160 [ice]
[ +0.000297] ? ice_vsi_dis_spoofchk+0x40/0x40 [ice]
[ +0.000305] ice_is_malicious_vf+0x1aa/0x250 [ice]
[ +0.000303] ? ice_restore_all_vfs_msi_state+0x160/0x160 [ice]
[ +0.000297] ? __mutex_unlock_slowpath.isra.15+0x410/0x410
[ +0.000022] ? ice_debug_cq+0xb7/0x230 [ice]
[ +0.000273] ? __kasan_slab_alloc+0x2f/0x90
[ +0.000022] ? memset+0x1f/0x40
[ +0.000017] ? do_raw_spin_lock+0x119/0x1d0
[ +0.000022] ? rwlock_bug.part.2+0x60/0x60
[ +0.000024] __ice_clean_ctrlq+0x3a6/0xd60 [ice]
[ +0.000273] ? newidle_balance+0x5b1/0x700
[ +0.000026] ? ice_print_link_msg+0x2f0/0x2f0 [ice]
[ +0.000271] ? update_cfs_group+0x1b/0x140
[ +0.000018] ? load_balance+0x1260/0x1260
[ +0.000022] ? ice_process_vflr_event+0x27/0x130 [ice]
[ +0.000301] ice_service_task+0x136e/0x1470 [ice]
[ +0.000281] process_one_work+0x3b4/0x6c0
[ +0.000030] worker_thread+0x65/0x660
[ +0.000023] ? __kthread_parkme+0xe4/0x100
[ +0.000021] ? process_one_work+0x6c0/0x6c0
[ +0.000020] kthread+0x179/0x1b0
[ +0.000018] ? kthread_complete_and_exit+0x20/0x20
[ +0.000022] ret_from_fork+0x22/0x30
[ +0.000026] </TASK>
[ +0.000018] Allocated by task 10742:
[ +0.000013] kasan_save_stack+0x1c/0x40
[ +0.000018] __kasan_kmalloc+0x84/0xa0
[ +0.000016] kmem_cache_alloc_trace+0x16c/0x2e0
[ +0.000015] intel_iommu_probe_device+0xeb/0x860
[ +0.000015] __iommu_probe_device+0x9a/0x2f0
[ +0.000016] iommu_probe_device+0x43/0x270
[ +0.000015] iommu_bus_notifier+0xa7/0xd0
[ +0.000015] blocking_notifier_call_chain+0x90/0xc0
[ +0.000017] device_add+0x5f3/0xd70
[ +0.000014] pci_device_add+0x404/0xa40
[ +0.000015] pci_iov_add_virtfn+0x3b0/0x550
[ +0.000016] sriov_enable+0x3bb/0x600
[ +0.000013] ice_ena_vfs+0x113/0xa79 [ice]
[ +0.000293] ice_sriov_configure.cold.17+0x21/0xe0 [ice]
[ +0.000291] sriov_numvfs_store+0x160/0x200
[ +0.000015] kernfs_fop_write_iter+0x1db/0x270
[ +0.000018] new_sync_write+0x21d/0x330
[ +0.000013] vfs_write+0x376/0x410
[ +0.000013] ksys_write+0xba/0x150
[ +0.000012] do_syscall_64+0x3a/0x80
[ +0.000012] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ +0.000028] Freed by task 10742:
[ +0.000011] kasan_save_stack+0x1c/0x40
[ +0.000015] kasan_set_track+0x21/0x30
[ +0.000016] kasan_set_free_info+0x20/0x30
[ +0.000012] __kasan_slab_free+0x104/0x170
[ +0.000016] kfree+0x9b/0x470
[ +0.000013] devres_destroy+0x1c/0x20
[ +0.000015] devm_kfree+0x33/0x40
[ +0.000012] ice_mbx_deinit_snapshot+0x39/0x70 [ice]
[ +0.000295] ice_sriov_configure+0xb0/0x260 [ice]
[ +0.000295] sriov_numvfs_store+0x1bc/0x200
[ +0.000015] kernfs_fop_write_iter+0x1db/0x270
[ +0.000016] new_sync_write+0x21d/0x330
[ +0.000012] vfs_write+0x376/0x410
[ +0.000012] ksys_write+0xba/0x150
[ +0.000012] do_syscall_64+0x3a/0x80
[ +0.000012] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ +0.000024] Last potentially related work creation:
[ +0.000010] kasan_save_stack+0x1c/0x40
[ +0.000016] __kasan_record_aux_stack+0x98/0xa0
[ +0.000013] insert_work+0x34/0x160
[ +0.000015] __queue_work+0x20e/0x650
[ +0.000016] queue_work_on+0x4c/0x60
[ +0.000015] nf_nat_masq_schedule+0x297/0x2e0 [nf_nat]
[ +0.000034] masq_device_event+0x5a/0x60 [nf_nat]
[ +0.000031] raw_notifier_call_chain+0x5f/0x80
[ +0.000017] dev_close_many+0x1d6/0x2c0
[ +0.000015] unregister_netdevice_many+0x4e3/0xa30
[ +0.000015] unregister_netdevice_queue+0x192/0x1d0
[ +0.000014] iavf_remove+0x8f9/0x930 [iavf]
[ +0.000058] pci_device_remove+0x65/0x110
[ +0.000015] device_release_driver_internal+0xf8/0x190
[ +0.000017] pci_stop_bus_device+0xb5/0xf0
[ +0.000014] pci_stop_and_remove_bus_device+0xe/0x20
[ +0.000016] pci_iov_remove_virtfn+0x19c/0x230
[ +0.000015] sriov_disable+0x4f/0x170
[ +0.000014] ice_free_vfs+0x9a/0x490 [ice]
[ +0.000306] ice_sriov_configure+0xb8/0x260 [ice]
[ +0.000294] sriov_numvfs_store+0x1bc/0x200
[ +0.000015] kernfs_fop_write_iter+0x1db/0x270
[ +0.000016] new_sync_write+0x21d/0x330
[ +0.000012] vfs_write+0x376/0x410
[ +0.000012] ksys_write+0xba/0x150
[ +0.000012] do_syscall_64+0x3a/0x80
[ +0.000012] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ +0.000025] The buggy address belongs to the object at ffff889908eb6f00
which belongs to the cache kmalloc-96 of size 96
[ +0.000016] The buggy address is located 40 bytes inside of
96-byte region [ffff889908eb6f00, ffff889908eb6f60)
[ +0.000026] The buggy address belongs to the physical page:
[ +0.000010] page:00000000b7e99a2e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1908eb6
[ +0.000016] flags: 0x57ffffc0000200(slab|node=1|zone=2|lastcpupid=0x1fffff)
[ +0.000024] raw: 0057ffffc0000200 ffffea0069d9fd80 dead000000000002 ffff88810004c780
[ +0.000015] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ +0.000009] page dumped because: kasan: bad access detected
[ +0.000016] Memory state around the buggy address:
[ +0.000012] ffff889908eb6e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ +0.000014] ffff889908eb6e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ +0.000014] >ffff889908eb6f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ +0.000011] ^
[ +0.000013] ffff889908eb6f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ +0.000013] ffff889908eb7000: fa fb fb fb fb fb fb fb fc fc fc fc fa fb fb fb
[ +0.000012] ==================================================================
Fixes: 0891c89674e8 ("ice: warn about potentially malicious VFs")
Reported-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We need to wait 5 s for EMP reset after firmware flash. Code was extracted
from OOT driver (ice v1.8.3 downloaded from sourceforge). Without this
wait, fw_activate let card in inconsistent state and recoverable only
by second flash/activate. Flash was tested on these fw's:
From -> To
3.00 -> 3.10/3.20
3.10 -> 3.00/3.20
3.20 -> 3.00/3.10
Reproducer:
[root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin
Preparing to flash
[fw.mgmt] Erasing
[fw.mgmt] Erasing done
[fw.mgmt] Flashing 100%
[fw.mgmt] Flashing done 100%
[fw.undi] Erasing
[fw.undi] Erasing done
[fw.undi] Flashing 100%
[fw.undi] Flashing done 100%
[fw.netlist] Erasing
[fw.netlist] Erasing done
[fw.netlist] Flashing 100%
[fw.netlist] Flashing done 100%
Activate new firmware by devlink reload
[root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate
reload_actions_performed:
fw_activate
[root@host ~]# ip link show ens7f0
71: ens7f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff
altname enp202s0f0
dmesg after flash:
[ 55.120788] ice: Copyright (c) 2018, Intel Corporation.
[ 55.274734] ice 0000:ca:00.0: Get PHY capabilities failed status = -5, continuing anyway
[ 55.569797] ice 0000:ca:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.28.0
[ 55.603629] ice 0000:ca:00.0: Get PHY capability failed.
[ 55.608951] ice 0000:ca:00.0: ice_init_nvm_phy_type failed: -5
[ 55.647348] ice 0000:ca:00.0: PTP init successful
[ 55.675536] ice 0000:ca:00.0: DCB is enabled in the hardware, max number of TCs supported on this port are 8
[ 55.685365] ice 0000:ca:00.0: FW LLDP is disabled, DCBx/LLDP in SW mode.
[ 55.692179] ice 0000:ca:00.0: Commit DCB Configuration to the hardware
[ 55.701382] ice 0000:ca:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:c9:02.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
Reboot doesn’t help, only second flash/activate with OOT or patched
driver put card back in consistent state.
After patch:
[root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin
Preparing to flash
[fw.mgmt] Erasing
[fw.mgmt] Erasing done
[fw.mgmt] Flashing 100%
[fw.mgmt] Flashing done 100%
[fw.undi] Erasing
[fw.undi] Erasing done
[fw.undi] Flashing 100%
[fw.undi] Flashing done 100%
[fw.netlist] Erasing
[fw.netlist] Erasing done
[fw.netlist] Flashing 100%
[fw.netlist] Flashing done 100%
Activate new firmware by devlink reload
[root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate
reload_actions_performed:
fw_activate
[root@host ~]# ip link show ens7f0
19: ens7f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff
altname enp202s0f0
Fixes: 399e27dbbd9e94 ("ice: support immediate firmware activation via devlink reload")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Previous patch labelled "ice: Fix incorrect locking in
ice_vc_process_vf_msg()" fixed an issue with ignored messages
sent by VF driver but a small race window still left.
Recently caught trace during 'ip link set ... vf 0 vlan ...' operation:
[ 7332.995625] ice 0000:3b:00.0: Clearing port VLAN on VF 0
[ 7333.001023] iavf 0000:3b:01.0: Reset indication received from the PF
[ 7333.007391] iavf 0000:3b:01.0: Scheduling reset task
[ 7333.059575] iavf 0000:3b:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 3
[ 7333.059626] ice 0000:3b:00.0: Invalid message from VF 0, opcode 3, len 4, error -1
Setting of VLAN for VF causes a reset of the affected VF using
ice_reset_vf() function that runs with cfg_lock taken:
1. ice_notify_vf_reset() informs IAVF driver that reset is needed and
IAVF schedules its own reset procedure
2. Bit ICE_VF_STATE_DIS is set in vf->vf_state
3. Misc initialization steps
4. ice_sriov_post_vsi_rebuild() -> ice_vf_set_initialized() and that
clears ICE_VF_STATE_DIS in vf->vf_state
Step 3 is mentioned race window because IAVF reset procedure runs in
parallel and one of its step is sending of VIRTCHNL_OP_GET_VF_RESOURCES
message (opcode==3). This message is handled in ice_vc_process_vf_msg()
and if it is received during the mentioned race window then it's
marked as invalid and error is returned to VF driver.
Protect vf_state check in ice_vc_process_vf_msg() by cfg_lock to avoid
this race condition.
Fixes: e6ba5273d4ed ("ice: Fix race conditions between virtchnl handling and VF ndo ops")
Tested-by: Fei Liu <feliu@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Usage of mutex_trylock() in ice_vc_process_vf_msg() is incorrect
because message sent from VF is ignored and never processed.
Use mutex_lock() instead to fix the issue. It is safe because this
mutex is used to prevent races between VF related NDOs and
handlers processing request messages from VF and these handlers
are running in ice_service_task() context. Additionally move this
mutex lock prior ice_vc_is_opcode_allowed() call to avoid potential
races during allowlist access.
Fixes: e6ba5273d4ed ("ice: Fix race conditions between virtchnl handling and VF ndo ops")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
We received a report[1] of kernel crashes when Cilium is used in XDP
mode with virtio_net after updating to newer kernels. After
investigating the reason it turned out that when using mergeable bufs
with an XDP program which adjusts xdp.data or xdp.data_meta page_to_buf()
calculates the build_skb address wrong because the offset can become less
than the headroom so it gets the address of the previous page (-X bytes
depending on how lower offset is):
page_to_skb: page addr ffff9eb2923e2000 buf ffff9eb2923e1ffc offset 252 headroom 256
This is a pr_err() I added in the beginning of page_to_skb which clearly
shows offset that is less than headroom by adding 4 bytes of metadata
via an xdp prog. The calculations done are:
receive_mergeable():
headroom = VIRTIO_XDP_HEADROOM; // VIRTIO_XDP_HEADROOM == 256 bytes
offset = xdp.data - page_address(xdp_page) -
vi->hdr_len - metasize;
page_to_skb():
p = page_address(page) + offset;
...
buf = p - headroom;
Now buf goes -4 bytes from the page's starting address as can be seen
above which is set as skb->head and skb->data by build_skb later. Depending
on what's done with the skb (when it's freed most often) we get all kinds
of corruptions and BUG_ON() triggers in mm[2]. We have to recalculate
the new headroom after the xdp program has run, similar to how offset
and len are recalculated. Headroom is directly related to
data_hard_start, data and data_meta, so we use them to get the new size.
The result is correct (similar pr_err() in page_to_skb, one case of
xdp_page and one case of virtnet buf):
a) Case with 4 bytes of metadata
[ 115.949641] page_to_skb: page addr ffff8b4dcfad2000 offset 252 headroom 252
[ 121.084105] page_to_skb: page addr ffff8b4dcf018000 offset 20732 headroom 252
b) Case of pushing data +32 bytes
[ 153.181401] page_to_skb: page addr ffff8b4dd0c4d000 offset 288 headroom 288
[ 158.480421] page_to_skb: page addr ffff8b4dd00b0000 offset 24864 headroom 288
c) Case of pushing data -33 bytes
[ 835.906830] page_to_skb: page addr ffff8b4dd3270000 offset 223 headroom 223
[ 840.839910] page_to_skb: page addr ffff8b4dcdd68000 offset 12511 headroom 223
Offset and headroom are equal because offset points to the start of
reserved bytes for the virtio_net header which are at buf start +
headroom, while data points at buf start + vnet hdr size + headroom so
when data or data_meta are adjusted by the xdp prog both the headroom size
and the offset change equally. We can use data_hard_start to compute the
new headroom after the xdp prog (linearized / page start case, the
virtnet buf case is similar just with bigger base offset):
xdp.data_hard_start = page_address + vnet_hdr
xdp.data = page_address + vnet_hdr + headroom
new headroom after xdp prog = xdp.data - xdp.data_hard_start - metasize
An example reproducer xdp prog[3] is below.
[1] https://github.com/cilium/cilium/issues/19453
[2] Two of the many traces:
[ 40.437400] BUG: Bad page state in process swapper/0 pfn:14940
[ 40.916726] BUG: Bad page state in process systemd-resolve pfn:053b7
[ 41.300891] kernel BUG at include/linux/mm.h:720!
[ 41.301801] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 41.302784] CPU: 1 PID: 1181 Comm: kubelet Kdump: loaded Tainted: G B W 5.18.0-rc1+ #37
[ 41.304458] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
[ 41.306018] RIP: 0010:page_frag_free+0x79/0xe0
[ 41.306836] Code: 00 00 75 ea 48 8b 07 a9 00 00 01 00 74 e0 48 8b 47 48 48 8d 50 ff a8 01 48 0f 45 fa eb d0 48 c7 c6 18 b8 30 a6 e8 d7 f8 fc ff <0f> 0b 48 8d 78 ff eb bc 48 8b 07 a9 00 00 01 00 74 3a 66 90 0f b6
[ 41.310235] RSP: 0018:ffffac05c2a6bc78 EFLAGS: 00010292
[ 41.311201] RAX: 000000000000003e RBX: 0000000000000000 RCX: 0000000000000000
[ 41.312502] RDX: 0000000000000001 RSI: ffffffffa6423004 RDI: 00000000ffffffff
[ 41.313794] RBP: ffff993c98823600 R08: 0000000000000000 R09: 00000000ffffdfff
[ 41.315089] R10: ffffac05c2a6ba68 R11: ffffffffa698ca28 R12: ffff993c98823600
[ 41.316398] R13: ffff993c86311ebc R14: 0000000000000000 R15: 000000000000005c
[ 41.317700] FS: 00007fe13fc56740(0000) GS:ffff993cdd900000(0000) knlGS:0000000000000000
[ 41.319150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 41.320152] CR2: 000000c00008a000 CR3: 0000000014908000 CR4: 0000000000350ee0
[ 41.321387] Call Trace:
[ 41.321819] <TASK>
[ 41.322193] skb_release_data+0x13f/0x1c0
[ 41.322902] __kfree_skb+0x20/0x30
[ 41.343870] tcp_recvmsg_locked+0x671/0x880
[ 41.363764] tcp_recvmsg+0x5e/0x1c0
[ 41.384102] inet_recvmsg+0x42/0x100
[ 41.406783] ? sock_recvmsg+0x1d/0x70
[ 41.428201] sock_read_iter+0x84/0xd0
[ 41.445592] ? 0xffffffffa3000000
[ 41.462442] new_sync_read+0x148/0x160
[ 41.479314] ? 0xffffffffa3000000
[ 41.496937] vfs_read+0x138/0x190
[ 41.517198] ksys_read+0x87/0xc0
[ 41.535336] do_syscall_64+0x3b/0x90
[ 41.551637] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 41.568050] RIP: 0033:0x48765b
[ 41.583955] Code: e8 4a 35 fe ff eb 88 cc cc cc cc cc cc cc cc e8 fb 7a fe ff 48 8b 7c 24 10 48 8b 74 24 18 48 8b 54 24 20 48 8b 44 24 08 0f 05 <48> 3d 01 f0 ff ff 76 20 48 c7 44 24 28 ff ff ff ff 48 c7 44 24 30
[ 41.632818] RSP: 002b:000000c000a2f5b8 EFLAGS: 00000212 ORIG_RAX: 0000000000000000
[ 41.664588] RAX: ffffffffffffffda RBX: 000000c000062000 RCX: 000000000048765b
[ 41.681205] RDX: 0000000000005e54 RSI: 000000c000e66000 RDI: 0000000000000016
[ 41.697164] RBP: 000000c000a2f608 R08: 0000000000000001 R09: 00000000000001b4
[ 41.713034] R10: 00000000000000b6 R11: 0000000000000212 R12: 00000000000000e9
[ 41.728755] R13: 0000000000000001 R14: 000000c000a92000 R15: ffffffffffffffff
[ 41.744254] </TASK>
[ 41.758585] Modules linked in: br_netfilter bridge veth netconsole virtio_net
and
[ 33.524802] BUG: Bad page state in process systemd-network pfn:11e60
[ 33.528617] page ffffe05dc0147b00 ffffe05dc04e7a00 ffff8ae9851ec000 (1) len 82 offset 252 metasize 4 hroom 0 hdr_len 12 data ffff8ae9851ec10c data_meta ffff8ae9851ec108 data_end ffff8ae9851ec14e
[ 33.529764] page:000000003792b5ba refcount:0 mapcount:-512 mapping:0000000000000000 index:0x0 pfn:0x11e60
[ 33.532463] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
[ 33.532468] raw: 000fffffc0000000 0000000000000000 dead000000000122 0000000000000000
[ 33.532470] raw: 0000000000000000 0000000000000000 00000000fffffdff 0000000000000000
[ 33.532471] page dumped because: nonzero mapcount
[ 33.532472] Modules linked in: br_netfilter bridge veth netconsole virtio_net
[ 33.532479] CPU: 0 PID: 791 Comm: systemd-network Kdump: loaded Not tainted 5.18.0-rc1+ #37
[ 33.532482] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014
[ 33.532484] Call Trace:
[ 33.532496] <TASK>
[ 33.532500] dump_stack_lvl+0x45/0x5a
[ 33.532506] bad_page.cold+0x63/0x94
[ 33.532510] free_pcp_prepare+0x290/0x420
[ 33.532515] free_unref_page+0x1b/0x100
[ 33.532518] skb_release_data+0x13f/0x1c0
[ 33.532524] kfree_skb_reason+0x3e/0xc0
[ 33.532527] ip6_mc_input+0x23c/0x2b0
[ 33.532531] ip6_sublist_rcv_finish+0x83/0x90
[ 33.532534] ip6_sublist_rcv+0x22b/0x2b0
[3] XDP program to reproduce(xdp_pass.c):
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
SEC("xdp_pass")
int xdp_pkt_pass(struct xdp_md *ctx)
{
bpf_xdp_adjust_head(ctx, -(int)32);
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
compile: clang -O2 -g -Wall -target bpf -c xdp_pass.c -o xdp_pass.o
load on virtio_net: ip link set enp1s0 xdpdrv obj xdp_pass.o sec xdp_pass
CC: stable@vger.kernel.org
CC: Jason Wang <jasowang@redhat.com>
CC: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
CC: Daniel Borkmann <daniel@iogearbox.net>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: virtualization@lists.linux-foundation.org
Fixes: 8fb7da9e9907 ("virtio_net: get build_skb() buf by data ptr")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220425103703.3067292-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The other port_hidden functions rely on the port_read/port_write
functions to access the hidden control port. These functions apply the
offset for port_base_addr where applicable. Update port_hidden_wait to
use the port_wait_bit so that port_base_addr offsets are accounted for
when waiting for the busy bit to change.
Without the offset the port_hidden_wait function would timeout on
devices that have a non-zero port_base_addr (e.g. MV88E6141), however
devices that have a zero port_base_addr would operate correctly (e.g.
MV88E6390).
Fixes: 609070133aff ("net: dsa: mv88e6xxx: update code operating on hidden registers")
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220425070454.348584-1-nathan@nathanrossi.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Return back the error value that we get from phy_read_mmd().
Fixes: c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1")
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
add support for Sierra Wireless EM7590 0xc081 composition.
Signed-off-by: Ethan Yang <etyang@sierrawireless.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220425054028.5444-1-etyang@sierrawireless.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")'
However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.
Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.
As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
Fixes: d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ksz8795 and ksz9477 uses the same algorithm for the
port_stp_state_set function except the register address is different. So
moved the algorithm to the ksz_common.c and used the dev_ops for
register read and write. This function can also used for the lan937x
part. Hence making it generic for all the parts.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424112831.11504-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Added the config_intr and handle_interrupt for the LAN937x phy which is
same as the LAN87xx phy.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220423154727.29052-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local wwan_wq.
While we are at it, make err_clean_devs: label of wwan_hwsim_init()
behave like wwan_hwsim_exit(), for it is theoretically possible to call
wwan_hwsim_debugfs_devcreate_write()/wwan_hwsim_debugfs_devdestroy_write()
by the moment wwan_hwsim_init_devs() returns.
Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/7390d51f-60e2-3cee-5277-b819a55ceabe@I-love.SAKURA.ne.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ieee802154_xmit_error() is the right helper to call when a transmission
has failed. Let's use it instead of open-coding it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220407100903.1695973-11-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
All the error codes defined in this driver are generic and already
defined in the ieee802154 main header. Let's just get rid of these extra
definition and switch to the core's values.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220407100903.1695973-10-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
ieee802154_xmit_hw_error() is the right helper to call when a transmission
has failed for a non-determined (and probably not IEEE802.15.4 specific)
reason. Let's use this helper instead of open-coding it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220407100903.1695973-9-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Commit 493bc90a9683 ("at86rf230: add debugfs support") brought trac
support as part of a debugfs feature, in order to add some testing
capabilities involving ack handling.
As we want to collect trac errors but do not need the debugfs feature
anymore, let's partially revert this commit, keeping the Tx trac
handling part which still makes sense. This allows to always return the
trac error directly to the core with the recently introduced
ieee802154_xmit_error() helper.
Suggested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220407100903.1695973-8-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
If we end up at this location, it means that there was likely a hardware
issue (either a bus error when asynchronously offloading the packet to
the transceiver, or the transceiver took too long for some state
change). In this case it was decided to return IEEE802154_SYSTEM_ERROR
through the ieee802154_xmit_hw_error() helper dedicated to non
IEEE802.15.4 specific errors.
Let's use this helper instead of (almost) open-coding it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20220407100903.1695973-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
This is a driver for pureLiFi X, XL, XC devices which use light to transmit
data, so they are not compatible with normal Wi-Fi devices. The driver uses
separate NL80211_BAND_LC band to distinguish from Wi-Fi. The driver is based
on 802.11 softMAC Architecture and uses native 802.11 for configuration and
management. Station and Ad-Hoc modes are supported.
The driver is compiled and tested in ARM, x86 architectures and compiled in
powerpc architecture. This driver implementation has been based on the zd1211rw
driver.
Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220224182042.132466-3-srini.raju@purelifi.com
|
|
bridge
DSA, through dsa_port_bridge_leave(), first notifies the port of the
fact that it left a bridge, then, if that bridge was VLAN-aware, it
notifies the port of the change in VLAN awareness state, towards
VLAN-unaware mode.
So ocelot_port_vlan_filtering() can be called when ocelot_port->bridge
is NULL, and this makes ocelot_add_vlan_unaware_pvid() create a struct
ocelot_bridge_vlan with a vid of 0 and an "untagged" setting of true on
that port.
In a way this structure correctly reflects the reality, but by design,
VID 0 (OCELOT_STANDALONE_PVID) was not meant to be kept in the bridge
VLAN list of the driver, but managed separately.
Having OCELOT_STANDALONE_PVID in ocelot->vlans makes us trip up on
several sanity checks that did not expect to have this VID there.
For example, after we leave a VLAN-aware bridge and we re-join it, we
can no longer program egress-tagged VLANs to hardware:
# ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
# ip link set swp0 master br0
# ip link set swp0 nomaster
# ip link set swp0 master br0
# bridge vlan add dev swp0 vid 100
Error: mscc_ocelot_switch_lib: Port with more than one egress-untagged VLAN cannot have egress-tagged VLANs.
But this configuration is in fact supported by the hardware, since we
could use OCELOT_PORT_TAG_NATIVE. According to its comment:
/* all VLANs except the native VLAN and VID 0 are egress-tagged */
yet when assessing the eligibility for this mode, we do not check for
VID 0 in ocelot_port_uses_native_vlan(), instead we just ensure that
ocelot_port_num_untagged_vlans() == 1. This is simply because VID 0
doesn't have a bridge VLAN structure.
The way I identify the problem is that ocelot_port_vlan_filtering(false)
only means to call ocelot_add_vlan_unaware_pvid() when we dynamically
turn off VLAN awareness for a bridge we are under, and the PVID changes
from the bridge PVID to a reserved PVID based on the bridge number.
Since OCELOT_STANDALONE_PVID is statically added to the VLAN table
during ocelot_vlan_init() and never removed afterwards, calling
ocelot_add_vlan_unaware_pvid() for it is not intended and does not serve
any purpose.
Fix the issue by avoiding the call to ocelot_add_vlan_unaware_pvid(vid=0)
when we're resetting VLAN awareness after leaving the bridge, to become
a standalone port.
Fixes: 54c319846086 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both the felix DSA driver and ocelot switchdev driver declare
dev->features & NETIF_F_HW_VLAN_CTAG_FILTER under certain circumstances*,
so the 8021q module will add VID 0 to our RX filter when the port goes
up, to ensure 802.1p traffic is not dropped.
We treat VID 0 as a special value (OCELOT_STANDALONE_PVID) which
deliberately does not have a struct ocelot_bridge_vlan associated with
it. Instead, this gets programmed to the VLAN table in ocelot_vlan_init().
If we allow external calls to modify VID 0, we reach the following
situation:
# ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
# ip link set swp0 master br0
# ip link set swp0 up # this adds VID 0 to ocelot->vlans with untagged=false
bridge vlan
port vlan-id
swp0 1 PVID Egress Untagged # the bridge also adds VID 1
br0 1 PVID Egress Untagged
# bridge vlan add dev swp0 vid 100 untagged
Error: mscc_ocelot_switch_lib: Port with egress-tagged VLANs cannot have more than one egress-untagged (native) VLAN.
This configuration should have been accepted, because
ocelot_port_manage_port_tag() should select OCELOT_PORT_TAG_NATIVE.
Yet it isn't, because we have an entry in ocelot->vlans which says
VID 0 should be egress-tagged, something the hardware can't do.
Fix this by suppressing additions/deletions on VID 0 and managing this
VLAN exclusively using OCELOT_STANDALONE_PVID.
*DSA toggles it when the port becomes VLAN-aware by joining a VLAN-aware
bridge. Ocelot declares it unconditionally for some reason.
Fixes: 54c319846086 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The aggregation byte limit for an endpoint is currently computed
based on the endpoint's receive buffer size.
However, some bytes at the front of each receive buffer are reserved
on the assumption that--as with SKBs--it might be useful to insert
data (such as headers) before what lands in the buffer.
The aggregation byte limit currently doesn't take into account that
reserved space, and as a result, aggregation could require space
past that which is available in the buffer.
Fix this by reducing the size used to compute the aggregation byte
limit by the NET_SKB_PAD offset reserved for each receive buffer.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check if the kzalloc() failed.
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The lan966x->ports[] array has lan966x->num_phys_ports elements. These
are assigned in lan966x_probe(). That means the > comparison should be
changed to >=.
The first off by one check is harmless but the second one could lead to
an out of bounds access and a crash.
Fixes: 5ccd66e01cbe ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace the BUG_ON() with returning error code to handle
the fault more gracefully.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
payload only memset but no use at all, so we drop them.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In one of the error paths of the device_for_each_child_node() loop
in hns_mac_init, add missing call to fwnode_handle_put.
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, there are some querying mailboxes sent from VF to PF,
and VF will wait the PF's handling result. For mailbox
HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail
when the input parameter is invalid, but the prototype of their
handler function is void. In this case, PF always return success
to VF, which may cause the VF get incorrect result.
Fixes it by adding return value for these function.
Fixes: 63b1279d9905 ("net: hns3: check queue id range before using")
Fixes: 532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add validity check for message data length in function
hclge_send_mbx_msg(), avoid unexpected overflow.
Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if
ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to
return -EINVAL for the invalid parameter case.
So this patch fixes it by return -EINVAL in this abnormal branch.
Fixes: 5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The comments in function hclge_comm_tqps_update_stats is not right,
so fix it.
Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse")
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For debugfs node rx/tx_queue_info and rx/tx_bd_info, their output info is
aligned to the right, it's not aligned with output of other debugfs node,
so uniform their output info.
Fixes: 907676b13071 ("net: hns3: use tx bounce buffer for small packets")
Fixes: e44c495d95e0 ("net: hns3: refactor queue info of debugfs")
Fixes: 77e9184869c9 ("net: hns3: refactor dump bd info of debugfs")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If failed to register netdev, it needs to clear INITED state and stop
client in case of cause problem when concurrency with uninitialized
process of driver.
Fixes: a289a7e5c1d4 ("net: hns3: put off calling register_netdev() until client initialize complete")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend MDDQ to obtain FW version of line card device and implement
device_info_get() op to fill up the info with that.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add FW version fields to MDDQ device_info.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement info_get() to expose HW revision of a linecard and loaded INI
version.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case the line card is provisioned, go over all possible existing
devices (gearboxes) on it and attach them, so devlink core is aware of
them.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend existing MDDQ register by possibility to query information about
devices residing on a line card.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add some chip_ops to support BT coexistence to work properly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-15-pkshih@realtek.com
|
|
Hardware reports PPDU status containing encoded channel index to driver,
so we decode it and then fill freq and band.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-14-pkshih@realtek.com
|
|
Read thermal value, and then we can use EWMA thermal value to do RF
calibrations if the value is changed over a threshold.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-13-pkshih@realtek.com
|
|
Three chip_ops are implemented in this patch. The ::set_txpwr_ctrl and
::init_txpwr_unit are called when we up interface and then configure TX
power registers to initial values. The ::set_txpwr_ctrl is to configure
'txpwr_ref' to make basic output TX power of OFDM and CCK rate to be the
same. The ::init_txpwr_unit is to initialize TSSI (a method to do TX power
compensation depends on thermal value) control and bandedge.
The ::set_txpwr is called once switching channel. First, it sets TX power
for each rate section (e.g. CCK, OFDM), and then sets TX power offset
between 1SS and 2SS rate. Finally, it sets TX power limit to prevent
power over regulation.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-12-pkshih@realtek.com
|
|
8852c propose new API to configure BB TX/RX path. Without fix patch, it
can't transmit any packet.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-11-pkshih@realtek.com
|
|
IQK results in hardware has two copies that are used by firmware to switch
these two to support MCC.
This H2C tell firmware the corresponding channel and band of each IQK
results, and currrent one.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-10-pkshih@realtek.com
|
|
When disconnecting, it warns somethings after power is off, and we can't
do HCI IO. So, add this patch to avoid below messages:
rtw89_8852ce 0000:03:00.0: timed out to flush pci txch: 11
rtw89_8852ce 0000:03:00.0: failed to pre-release fwcmd
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-9-pkshih@realtek.com
|
|
RPP is to report certain skb(s) can be freed, and TX BD indicates which
TX descriptors can be freed. Normally, TX BD is happened before RPP.
In low power mode, RPP can happen ahead, so change flow to handle this
case.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220421120903.73715-8-pkshih@realtek.com
|
