summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-08-17net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet countersVladimir Oltean
What the driver actually reports as 256-511 is in fact 512-1023, and the TX packets in the 256-511 bucket are not reported. Fix that. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions()Rustam Subkhankulov
If an error occurs in dsa_devlink_region_create(), then 'priv->regions' array will be accessed by negative index '-1'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru> Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region") Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17net: dsa: microchip: ksz9477: fix fdb_dump last invalid entryArun Ramadoss
In the ksz9477_fdb_dump function it reads the ALU control register and exit from the timeout loop if there is valid entry or search is complete. After exiting the loop, it reads the alu entry and report to the user space irrespective of entry is valid. It works till the valid entry. If the loop exited when search is complete, it reads the alu table. The table returns all ones and it is reported to user space. So bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port. To fix it, after exiting the loop the entry is reported only if it is valid one. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17ice: Fix VF not able to send tagged traffic with no VLAN filtersSylwester Dziedziuch
VF was not able to send tagged traffic when it didn't have any VLAN interfaces and VLAN anti-spoofing was enabled. Fix this by allowing VFs with no VLAN filters to send tagged traffic. After VF adds a VLAN interface it will be able to send tagged traffic matching VLAN filters only. Testing hints: 1. Spawn VF 2. Send tagged packet from a VF 3. The packet should be sent out and not dropped 4. Add a VLAN interface on VF 5. Send tagged packet on that VLAN interface 6. Packet should be sent out and not dropped 7. Send tagged packet with id different than VLAN interface 8. Packet should be dropped Fixes: daf4dd16438b ("ice: Refactor spoofcheck configuration functions") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Ignore error message when setting same promiscuous modeBenjamin Mikailenko
Commit 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") introduced new checks when setting/clearing promiscuous mode. But if the requested promiscuous mode setting already exists, an -EEXIST error message would be printed. This is incorrect because promiscuous mode is either on/off and shouldn't print an error when the requested configuration is already set. This can happen when removing a bridge with two bonded interfaces and promiscuous most isn't fully cleared from VLAN VSI in hardware. Fix this by ignoring cases where requested promiscuous mode exists. Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Fix clearing of promisc mode with bridge over bondGrzegorz Siwik
When at least two interfaces are bonded and a bridge is enabled on the bond, an error can occur when the bridge is removed and re-added. The reason for the error is because promiscuous mode was not fully cleared from the VLAN VSI in the hardware. With this change, promiscuous mode is properly removed when the bridge disconnects from bonding. [ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it [ 1033.676366] bond1: making interface enp175s0f0 the new active one [ 1033.676369] device enp95s0f0 left promiscuous mode [ 1033.676522] device enp175s0f0 entered promiscuous mode [ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6 [ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6 [ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it [ 1041.944874] device enp175s0f0 left promiscuous mode [ 1041.944918] bond1: now running without any active interface! Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Ignore EEXIST when setting promisc modeGrzegorz Siwik
Ignore EEXIST error when setting promiscuous mode. This fix is needed because the driver could set promiscuous mode when it still has not cleared properly. Promiscuous mode could be set only once, so setting it second time will be rejected. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Fix double VLAN error when entering promisc modeGrzegorz Siwik
Avoid enabling or disabling VLAN 0 when trying to set promiscuous VLAN mode if double VLAN mode is enabled. This fix is needed because the driver tries to add the VLAN 0 filter twice (once for inner and once for outer) when double VLAN mode is enabled. The filter program is rejected by the firmware when double VLAN is enabled, because the promiscuous filter only needs to be set once. This issue was missed in the initial implementation of double VLAN mode. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16i40e: Fix to stop tx_timeout recovery if GLOBR failsAlan Brady
When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16i40e: Fix tunnel checksum offload with fragmented trafficPrzemyslaw Patynowski
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \ enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Without this patch, TX descriptor was using wrong data, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl sizePotnuri Bharat Teja
Commit 'c2ed5611afd7' has increased the cpl_t5_pass_accept_rpl{} structure size by 8B to avoid roundup. cpl_t5_pass_accept_rpl{} is a HW specific structure and increasing its size will lead to unwanted adapter errors. Current commit reverts the cpl_t5_pass_accept_rpl{} back to its original and allocates zeroed skb buffer there by avoiding the memset for iss field. Reorder code to minimize chip type checks. Fixes: c2ed5611afd7 ("iw_cxgb4: Use memset_startat() for cpl_t5_pass_accept_rpl") Link: https://lore.kernel.org/r/20220809184118.2029-1-rahul.lakkireddy@chelsio.com Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-08-16virtio_net: Revert "virtio_net: set the default max ring size by find_vqs()"Michael S. Tsirkin
This reverts commit 762faee5a2678559d3dc09d95f8f2c54cd0466a7. This has been reported to trip up guests on GCP (Google Cloud). The reason is that virtio_find_vqs_ctx_size is broken on legacy devices. We can in theory fix virtio_find_vqs_ctx_size but in fact the patch itself has several other issues: - It treats unknown speed as < 10G - It leaves userspace no way to find out the ring size set by hypervisor - It tests speed when link is down - It ignores the virtio spec advice: Both \field{speed} and \field{duplex} can change, thus the driver is expected to re-read these values after receiving a configuration change notification. - It is not clear the performance impact has been tested properly Revert the patch for now. Reported-by: Andres Freund <andres@anarazel.de> Link: https://lore.kernel.org/r/20220814212610.GA3690074%40roeck-us.net Link: https://lore.kernel.org/r/20220815070203.plwjx7b3cyugpdt7%40awork3.anarazel.de Link: https://lore.kernel.org/r/3df6bb82-1951-455d-a768-e9e1513eb667%40www.fastmail.com Link: https://lore.kernel.org/r/FCDC5DDE-3CDD-4B8A-916F-CA7D87B547CE%40anarazel.de Fixes: 762faee5a267 ("virtio_net: set the default max ring size by find_vqs()") Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Andres Freund <andres@anarazel.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Message-Id: <20220816053602.173815-2-mst@redhat.com>
2022-08-15Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-12 (iavf) This series contains updates to iavf driver only. Przemyslaw frees memory for admin queues in initialization error paths, prevents freeing of vf_res which is causing null pointer dereference, and adjusts calls in error path of reset to avoid iavf_close() which could cause deadlock. Ivan Vecera avoids deadlock that can occur when driver if part of failover. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix deadlock in initialization iavf: Fix reset error handling iavf: Fix NULL pointer dereference in iavf_get_link_ksettings iavf: Fix adminq error handling ==================== Link: https://lore.kernel.org/r/20220812172309.853230-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-15net: moxa: pass pdev instead of ndev to DMA functionsSergei Antonov
dma_map_single() calls fail in moxart_mac_setup_desc_ring() and moxart_mac_start_xmit() which leads to an incessant output of this: [ 16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error Passing pdev to DMA is a common approach among net drivers. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-15mlxsw: spectrum_ptp: Forbid PTP enablement only in RX or in TXAmit Cohen
Currently mlxsw driver configures one global PTP configuration for all ports. The reason is that the switch behaves like a transparent clock between CPU port and front-panel ports. When time stamp is enabled in any port, the hardware is configured to update the correction field. The fact that the configuration of CPU port affects all the ports, makes the correction field update to be global for all ports. Otherwise, user will see odd values in the correction field, as the switch will update the correction field in the CPU port, but not in all the front-panel ports. The CPU port is relevant in both RX and TX, so to avoid problematic configuration, forbid PTP enablement only in one direction, i.e., only in RX or TX. Without the change: $ hwstamp_ctl -i swp1 -r 12 -t 0 current settings: tx_type 0 rx_filter 0 new settings: tx_type 0 rx_filter 2 $ echo $? 0 With the change: $ hwstamp_ctl -i swp1 -r 12 -t 0 current settings: tx_type 1 rx_filter 2 SIOCSHWTSTAMP failed: Invalid argument Fixes: 08ef8bc825d96 ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-15mlxsw: spectrum_ptp: Protect PTP configuration with a mutexAmit Cohen
Currently the functions mlxsw_sp2_ptp_{configure, deconfigure}_port() assume that they are called when RTNL is locked and they warn otherwise. The deconfigure function can be called when port is removed, for example as part of device reload, then there is no locked RTNL and the function warns [1]. To avoid such case, do not assume that RTNL protects this code, add a dedicated mutex instead. The mutex protects 'ptp_state->config' which stores the existing global configuration in hardware. Use this mutex also to protect the code which configures the hardware. Then, there will be only one configuration in any time, which will be updated in 'ptp_state' and a race will be avoided. [1]: RTNL: assertion failed at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c (1600) WARNING: CPU: 1 PID: 1583493 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1600 mlxsw_sp2_ptp_hwtstamp_set+0x2d3/0x300 [mlxsw_spectrum] [...] CPU: 1 PID: 1583493 Comm: devlink Not tainted5.19.0-rc8-custom-127022-gb371dffda095 #789 Hardware name: Mellanox Technologies Ltd.MSN3420/VMOD0005, BIOS 5.11 01/06/2019 RIP: 0010:mlxsw_sp2_ptp_hwtstamp_set+0x2d3/0x300[mlxsw_spectrum] [...] Call Trace: <TASK> mlxsw_sp_port_remove+0x7e/0x190 [mlxsw_spectrum] mlxsw_sp_fini+0xd1/0x270 [mlxsw_spectrum] mlxsw_core_bus_device_unregister+0x55/0x280 [mlxsw_core] mlxsw_devlink_core_bus_device_reload_down+0x1c/0x30[mlxsw_core] devlink_reload+0x1ee/0x230 devlink_nl_cmd_reload+0x4de/0x580 genl_family_rcv_msg_doit+0xdc/0x140 genl_rcv_msg+0xd7/0x1d0 netlink_rcv_skb+0x49/0xf0 genl_rcv+0x1f/0x30 netlink_unicast+0x22f/0x350 netlink_sendmsg+0x208/0x440 __sys_sendto+0xf0/0x140 __x64_sys_sendto+0x1b/0x20 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 08ef8bc825d96 ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Reported-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-15mlxsw: spectrum: Clear PTP configuration after unregistering the netdeviceAmit Cohen
Currently as part of removing port, PTP API is called to clear the existing configuration and set the 'rx_filter' and 'tx_type' to zero. The clearing is done before unregistering the netdevice, which means that there is a window of time in which the user can reconfigure PTP in the port, and this configuration will not be cleared. Reorder the operations, clear PTP configuration after unregistering the netdevice. Fixes: 8748642751ede ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-15mlxsw: spectrum_ptp: Fix compilation warningsAmit Cohen
In case that 'CONFIG_PTP_1588_CLOCK' is not enabled in the config file, there are implementations for the functions mlxsw_{sp,sp2}_ptp_txhdr_construct() as part of 'spectrum_ptp.h'. In this case, they should be defined as 'static' as they are not supposed to be used out of this file. Make the functions 'static', otherwise the following warnings are returned: "warning: no previous prototype for 'mlxsw_sp_ptp_txhdr_construct'" "warning: no previous prototype for 'mlxsw_sp2_ptp_txhdr_construct'" In addition, make the functions 'inline' for case that 'spectrum_ptp.h' will be included anywhere else and the functions would probably not be used, so compilation warnings about unused static will be returned. Fixes: 24157bc69f45 ("mlxsw: Send PTP packets as data packets to overcome a limitation") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-15Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/netDavid S. Miller
-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-11 (ice) This series contains updates to ice driver only. Benjamin corrects a misplaced parenthesis for a WARN_ON check. Michal removes WARN_ON from a check as its recoverable and not warranting of a call trace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-12net: dsa: mv88e6060: prevent crash on an unused portSergei Antonov
If the port isn't a CPU port nor a user port, 'cpu_dp' is a null pointer and a crash happened on dereferencing it in mv88e6060_setup_port(): [ 9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014 ... [ 9.942216] mv88e6060_setup from dsa_register_switch+0x814/0xe84 [ 9.948616] dsa_register_switch from mdio_probe+0x2c/0x54 [ 9.954433] mdio_probe from really_probe.part.0+0x98/0x2a0 [ 9.960375] really_probe.part.0 from driver_probe_device+0x30/0x10c [ 9.967029] driver_probe_device from __device_attach_driver+0xb8/0x13c [ 9.973946] __device_attach_driver from bus_for_each_drv+0x90/0xe0 [ 9.980509] bus_for_each_drv from __device_attach+0x110/0x184 [ 9.986632] __device_attach from bus_probe_device+0x8c/0x94 [ 9.992577] bus_probe_device from deferred_probe_work_func+0x78/0xa8 [ 9.999311] deferred_probe_work_func from process_one_work+0x290/0x73c [ 10.006292] process_one_work from worker_thread+0x30/0x4b8 [ 10.012155] worker_thread from kthread+0xd4/0x10c [ 10.017238] kthread from ret_from_fork+0x14/0x3c Fixes: 0abfd494deef ("net: dsa: use dedicated CPU port") CC: Vivien Didelot <vivien.didelot@savoirfairelinux.com> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220811070939.1717146-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-12fec: Fix timer capture timing in `fec_ptp_enable_pps()`Csókás Bence
Code reimplements functionality already in `fec_ptp_read()`, but misses check for FEC_QUIRK_BUG_CAPTURE. Replace with function call. Fixes: 28b5f058cf1d ("net: fec: ptp: fix convergence issue to support LinuxPTP stack") Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Link: https://lore.kernel.org/r/20220811101348.13755-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-12Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - A huge patchset supporting vq resize using the new vq reset capability - Features, fixes, and cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits) vdpa/mlx5: Fix possible uninitialized return value vdpa_sim_blk: add support for discard and write-zeroes vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests vdpa_sim_blk: check if sector is 0 for commands other than read or write vdpa_sim: Implement suspend vdpa op vhost-vdpa: uAPI to suspend the device vhost-vdpa: introduce SUSPEND backend feature bit vdpa: Add suspend operation virtio-blk: Avoid use-after-free on suspend/resume virtio_vdpa: support the arg sizes of find_vqs() vhost-vdpa: Call ida_simple_remove() when failed vDPA: fix 'cast to restricted le16' warnings in vdpa.c vDPA: !FEATURES_OK should not block querying device config space vDPA/ifcvf: support userspace to query features and MQ of a management device vDPA/ifcvf: get_config_size should return a value no greater than dev implementation vhost scsi: Allow user to control num virtqueues vhost-scsi: Fix max number of virtqueues vdpa/mlx5: Support different address spaces for control and data vdpa/mlx5: Implement susupend virtqueue callback ...
2022-08-12iavf: Fix deadlock in initializationIvan Vecera
Fix deadlock that occurs when iavf interface is a part of failover configuration. 1. Mutex crit_lock is taken at the beginning of iavf_watchdog_task() 2. Function iavf_init_config_adapter() is called when adapter state is __IAVF_INIT_CONFIG_ADAPTER 3. iavf_init_config_adapter() calls register_netdevice() that emits NETDEV_REGISTER event 4. Notifier function failover_event() then calls net_failover_slave_register() that calls dev_open() 5. dev_open() calls iavf_open() that tries to take crit_lock in end-less loop Stack trace: ... [ 790.251876] usleep_range_state+0x5b/0x80 [ 790.252547] iavf_open+0x37/0x1d0 [iavf] [ 790.253139] __dev_open+0xcd/0x160 [ 790.253699] dev_open+0x47/0x90 [ 790.254323] net_failover_slave_register+0x122/0x220 [net_failover] [ 790.255213] failover_slave_register.part.7+0xd2/0x180 [failover] [ 790.256050] failover_event+0x122/0x1ab [failover] [ 790.256821] notifier_call_chain+0x47/0x70 [ 790.257510] register_netdevice+0x20f/0x550 [ 790.258263] iavf_watchdog_task+0x7c8/0xea0 [iavf] [ 790.259009] process_one_work+0x1a7/0x360 [ 790.259705] worker_thread+0x30/0x390 To fix the situation we should check the current adapter state after first unsuccessful mutex_trylock() and return with -EBUSY if it is __IAVF_INIT_CONFIG_ADAPTER. Fixes: 226d528512cf ("iavf: fix locking of critical sections") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-12iavf: Fix reset error handlingPrzemyslaw Patynowski
Do not call iavf_close in iavf_reset_task error handling. Doing so can lead to double call of napi_disable, which can lead to deadlock there. Removing VF would lead to iavf_remove task being stuck, because it requires crit_lock, which is held by iavf_close. Call iavf_disable_vf if reset fail, so that driver will clean up remaining invalid resources. During rapid VF resets, HW can fail to setup VF mailbox. Wrong error handling can lead to iavf_remove being stuck with: [ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53 ... [ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds. [ 5267.189520] Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 5267.190062] task:repro.sh state:D stack: 0 pid:11219 ppid: 8162 flags:0x00000000 [ 5267.190347] Call Trace: [ 5267.190647] <TASK> [ 5267.190927] __schedule+0x460/0x9f0 [ 5267.191264] schedule+0x44/0xb0 [ 5267.191563] schedule_preempt_disabled+0x14/0x20 [ 5267.191890] __mutex_lock.isra.12+0x6e3/0xac0 [ 5267.192237] ? iavf_remove+0xf9/0x6c0 [iavf] [ 5267.192565] iavf_remove+0x12a/0x6c0 [iavf] [ 5267.192911] ? _raw_spin_unlock_irqrestore+0x1e/0x40 [ 5267.193285] pci_device_remove+0x36/0xb0 [ 5267.193619] device_release_driver_internal+0xc1/0x150 [ 5267.193974] pci_stop_bus_device+0x69/0x90 [ 5267.194361] pci_stop_and_remove_bus_device+0xe/0x20 [ 5267.194735] pci_iov_remove_virtfn+0xba/0x120 [ 5267.195130] sriov_disable+0x2f/0xe0 [ 5267.195506] ice_free_vfs+0x7d/0x2f0 [ice] [ 5267.196056] ? pci_get_device+0x4f/0x70 [ 5267.196496] ice_sriov_configure+0x78/0x1a0 [ice] [ 5267.196995] sriov_numvfs_store+0xfe/0x140 [ 5267.197466] kernfs_fop_write_iter+0x12e/0x1c0 [ 5267.197918] new_sync_write+0x10c/0x190 [ 5267.198404] vfs_write+0x24e/0x2d0 [ 5267.198886] ksys_write+0x5c/0xd0 [ 5267.199367] do_syscall_64+0x3a/0x80 [ 5267.199827] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 5267.200317] RIP: 0033:0x7f5b381205c8 [ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8 [ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001 [ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820 [ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0 [ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002 [ 5267.206041] </TASK> [ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks [ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 5267.209623] Call Trace: [ 5267.210569] <TASK> [ 5267.211480] dump_stack_lvl+0x33/0x42 [ 5267.212472] panic+0x107/0x294 [ 5267.213467] watchdog.cold.8+0xc/0xbb [ 5267.214413] ? proc_dohung_task_timeout_secs+0x30/0x30 [ 5267.215511] kthread+0xf4/0x120 [ 5267.216459] ? kthread_complete_and_exit+0x20/0x20 [ 5267.217505] ret_from_fork+0x22/0x30 [ 5267.218459] </TASK> Fixes: f0db78928783 ("i40evf: use netdev variable in reset task") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-12iavf: Fix NULL pointer dereference in iavf_get_link_ksettingsPrzemyslaw Patynowski
Fix possible NULL pointer dereference, due to freeing of adapter->vf_res in iavf_init_get_resources. Previous commit introduced a regression, where receiving IAVF_ERR_ADMIN_QUEUE_NO_WORK from iavf_get_vf_config would free adapter->vf_res. However, netdev is still registered, so ethtool_ops can be called. Calling iavf_get_link_ksettings with no vf_res, will result with: [ 9385.242676] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9385.242683] #PF: supervisor read access in kernel mode [ 9385.242686] #PF: error_code(0x0000) - not-present page [ 9385.242690] PGD 0 P4D 0 [ 9385.242696] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 9385.242701] CPU: 6 PID: 3217 Comm: pmdalinux Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 9385.242708] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 9385.242710] RIP: 0010:iavf_get_link_ksettings+0x29/0xd0 [iavf] [ 9385.242745] Code: 00 0f 1f 44 00 00 b8 01 ef ff ff 48 c7 46 30 00 00 00 00 48 c7 46 38 00 00 00 00 c6 46 0b 00 66 89 46 08 48 8b 87 68 0e 00 00 <f6> 40 08 80 75 50 8b 87 5c 0e 00 00 83 f8 08 74 7a 76 1d 83 f8 20 [ 9385.242749] RSP: 0018:ffffc0560ec7fbd0 EFLAGS: 00010246 [ 9385.242755] RAX: 0000000000000000 RBX: ffffc0560ec7fc08 RCX: 0000000000000000 [ 9385.242759] RDX: ffffffffc0ad4550 RSI: ffffc0560ec7fc08 RDI: ffffa0fc66674000 [ 9385.242762] RBP: 00007ffd1fb2bf50 R08: b6a2d54b892363ee R09: ffffa101dc14fb00 [ 9385.242765] R10: 0000000000000000 R11: 0000000000000004 R12: ffffa0fc66674000 [ 9385.242768] R13: 0000000000000000 R14: ffffa0fc66674000 R15: 00000000ffffffa1 [ 9385.242771] FS: 00007f93711a2980(0000) GS:ffffa0fad72c0000(0000) knlGS:0000000000000000 [ 9385.242775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9385.242778] CR2: 0000000000000008 CR3: 0000000a8e61c003 CR4: 00000000003706e0 [ 9385.242781] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9385.242784] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9385.242787] Call Trace: [ 9385.242791] <TASK> [ 9385.242793] ethtool_get_settings+0x71/0x1a0 [ 9385.242814] __dev_ethtool+0x426/0x2f40 [ 9385.242823] ? slab_post_alloc_hook+0x4f/0x280 [ 9385.242836] ? kmem_cache_alloc_trace+0x15d/0x2f0 [ 9385.242841] ? dev_ethtool+0x59/0x170 [ 9385.242848] dev_ethtool+0xa7/0x170 [ 9385.242856] dev_ioctl+0xc3/0x520 [ 9385.242866] sock_do_ioctl+0xa0/0xe0 [ 9385.242877] sock_ioctl+0x22f/0x320 [ 9385.242885] __x64_sys_ioctl+0x84/0xc0 [ 9385.242896] do_syscall_64+0x3a/0x80 [ 9385.242904] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 9385.242918] RIP: 0033:0x7f93702396db [ 9385.242923] Code: 73 01 c3 48 8b 0d ad 57 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 57 38 00 f7 d8 64 89 01 48 [ 9385.242927] RSP: 002b:00007ffd1fb2bf18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 9385.242932] RAX: ffffffffffffffda RBX: 000055671b1d2fe0 RCX: 00007f93702396db [ 9385.242935] RDX: 00007ffd1fb2bf20 RSI: 0000000000008946 RDI: 0000000000000007 [ 9385.242937] RBP: 00007ffd1fb2bf20 R08: 0000000000000003 R09: 0030763066307330 [ 9385.242940] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd1fb2bf80 [ 9385.242942] R13: 0000000000000007 R14: 0000556719f6de90 R15: 00007ffd1fb2c1b0 [ 9385.242948] </TASK> [ 9385.242949] Modules linked in: iavf(E) xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_compat nf_nat_tftp nft_objref nf_conntrack_tftp bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink vfat fat irdma ib_uverbs ib_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support ice irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl i40e pcspkr intel_cstate joydev mei_me intel_uncore mxm_wmi mei ipmi_ssif lpc_ich ipmi_si acpi_power_meter xfs libcrc32c mgag200 i2c_algo_bit drm_shmem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft crc64 syscopyarea sg sysfillrect sysimgblt fb_sys_fops drm ixgbe ahci libahci libata crc32c_intel mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ 9385.243065] [last unloaded: iavf] Dereference happens in if (ADV_LINK_SUPPORT(adapter)) statement Fixes: 209f2f9c7181 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-12iavf: Fix adminq error handlingPrzemyslaw Patynowski
iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent memory for VF mailbox. Free DMA regions for both ASQ and ARQ in case error happens during configuration of ASQ/ARQ registers. Without this change it is possible to see when unloading interface: 74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32] One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Fixes: d358aa9a7a2d ("i40evf: init code and hardware support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-12net: lan966x: fix checking for return value of platform_get_irq_byname()Li Qiong
The platform_get_irq_byname() returns non-zero IRQ number or negative error number. "if (irq)" always true, chang it to "if (irq > 0)" Signed-off-by: Li Qiong <liqiong@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-12net: cxgb3: Fix comment typoJason Wang
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-12bnx2x: Fix comment typoJason Wang
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-12net: ipa: Fix comment typoJason Wang
The double `is' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-12virtio_net: fix endian-ness for RSSMichael S. Tsirkin
Using native endian-ness for device supplied fields is wrong on BE platforms. Sparse warns about this. Fixes: 91f41f01d219 ("drivers/net/virtio_net: Added RSS hash report.") Cc: "Andrew Melnychenko" <andrew@daynix.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-12skfp/h: fix repeated words in commentsJilin Yuan
Delete the redundant word 'the'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-11Merge tag 'net-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf, can and netfilter. A little larger than usual but it's all fixes, no late features. It's large partially because of timing, and partially because of follow ups to stuff that got merged a week or so before the merge window and wasn't as widely tested. Maybe the Bluetooth fixes are a little alarming so we'll address that, but the rest seems okay and not scary. Notably we're including a fix for the netfilter Kconfig [1], your WiFi warning [2] and a bluetooth fix which should unblock syzbot [3]. Current release - regressions: - Bluetooth: - don't try to cancel uninitialized works [3] - L2CAP: fix use-after-free caused by l2cap_chan_put - tls: rx: fix device offload after recent rework - devlink: fix UAF on failed reload and leftover locks in mlxsw Current release - new code bugs: - netfilter: - flowtable: fix incorrect Kconfig dependencies [1] - nf_tables: fix crash when nf_trace is enabled - bpf: - use proper target btf when exporting attach_btf_obj_id - arm64: fixes for bpf trampoline support - Bluetooth: - ISO: unlock on error path in iso_sock_setsockopt() - ISO: fix info leak in iso_sock_getsockopt() - ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP - ISO: fix memory corruption on iso_pinfo.base - ISO: fix not using the correct QoS - hci_conn: fix updating ISO QoS PHY - phy: dp83867: fix get nvmem cell fail Previous releases - regressions: - wifi: cfg80211: fix validating BSS pointers in __cfg80211_connect_result [2] - atm: bring back zatm uAPI after ATM had been removed - properly fix old bug making bonding ARP monitor mode not being able to work with software devices with lockless Tx - tap: fix null-deref on skb->dev in dev_parse_header_protocol - revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some devices and breaks others - netfilter: - nf_tables: many fixes rejecting cross-object linking which may lead to UAFs - nf_tables: fix null deref due to zeroed list head - nf_tables: validate variable length element extension - bgmac: fix a BUG triggered by wrong bytes_compl - bcmgenet: indicate MAC is in charge of PHY PM Previous releases - always broken: - bpf: - fix bad pointer deref in bpf_sys_bpf() injected via test infra - disallow non-builtin bpf programs calling the prog_run command - don't reinit map value in prealloc_lru_pop - fix UAFs during the read of map iterator fd - fix invalidity check for values in sk local storage map - reject sleepable program for non-resched map iterator - mptcp: - move subflow cleanup in mptcp_destroy_common() - do not queue data on closed subflows - virtio_net: fix memory leak inside XDP_TX with mergeable - vsock: fix memory leak when multiple threads try to connect() - rework sk_user_data sharing to prevent psock leaks - geneve: fix TOS inheriting for ipv4 - tunnels & drivers: do not use RT_TOS for IPv6 flowlabel - phy: c45 baset1: do not skip aneg configuration if clock role is not specified - rose: avoid overflow when /proc displays timer information - x25: fix call timeouts in blocking connects - can: mcp251x: fix race condition on receive interrupt - can: j1939: - replace user-reachable WARN_ON_ONCE() with netdev_warn_once() - fix memory leak of skbs in j1939_session_destroy() Misc: - docs: bpf: clarify that many things are not uAPI - seg6: initialize induction variable to first valid array index (to silence clang vs objtool warning) - can: ems_usb: fix clang 14's -Wunaligned-access warning" * tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits) net: atm: bring back zatm uAPI dpaa2-eth: trace the allocated address instead of page struct net: add missing kdoc for struct genl_multicast_group::flags nfp: fix use-after-free in area_cache_get() MAINTAINERS: use my korg address for mt7601u mlxsw: minimal: Fix deadlock in ports creation bonding: fix reference count leak in balance-alb mode net: usb: qmi_wwan: Add support for Cinterion MV32 bpf: Shut up kern_sys_bpf warning. net/tls: Use RCU API to access tls_ctx->netdev tls: rx: device: don't try to copy too much on detach tls: rx: device: bound the frag walk net_sched: cls_route: remove from list when handle is 0 selftests: forwarding: Fix failing tests with old libnet net: refactor bpf_sk_reuseport_detach() net: fix refcount bug in sk_psock_get (2) selftests/bpf: Ensure sleepable program is rejected by hash map iter selftests/bpf: Add write tests for sk local storage map iterator selftests/bpf: Add tests for reading a dangling map iter fd bpf: Only allow sleepable program for resched-able iterator ...
2022-08-11dpaa2-eth: trace the allocated address instead of page structChen Lin
We should trace the allocated address instead of page struct. Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer") Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11nfp: fix use-after-free in area_cache_get()Jialiang Wang
area_cache_get() is used to distribute cache->area and set cache->id, and if cache->id is not 0 and cache->area->kref refcount is 0, it will release the cache->area by nfp_cpp_area_release(). area_cache_get() set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire(). But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is is already set but the refcount is not increased as expected. At this time, calling the nfp_cpp_area_release() will cause use-after-free. To avoid the use-after-free, set cache->id after area_init() and nfp_cpp_area_acquire() complete successfully. Note: This vulnerability is triggerable by providing emulated device equipped with specified configuration. BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1 Call Trace: <TASK> nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884) Allocated by task 1: nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303) nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802) nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230) nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215) nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744) Freed by task 1: kfree (mm/slub.c:4562) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873) nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973) nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48) Signed-off-by: Jialiang Wang <wangjialiang0806@163.com> Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11mlxsw: minimal: Fix deadlock in ports creationVadim Pasternak
Drop devl_lock() / devl_unlock() from ports creation and removal flows since the devlink instance lock is now taken by mlxsw_core. Fixes: 72a4c8c94efa ("mlxsw: convert driver to use unlocked devlink API during init/fini") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/f4afce5ab0318617f3866b85274be52542d59b32.1660211614.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11ice: Fix call trace with null VSI during VF resetMichal Jaron
During stress test with attaching and detaching VF from KVM and simultaneously changing VFs spoofcheck and trust there was a call trace in ice_reset_vf that VF's VSI is null. [145237.352797] WARNING: CPU: 46 PID: 840629 at drivers/net/ethernet/intel/ice/ice_vf_lib.c:508 ice_reset_vf+0x3d6/0x410 [ice] [145237.352851] Modules linked in: ice(E) vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio iavf dm_mod xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc sunrpc intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTC O_vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl ipmi_si intel_cstate ipmi_devintf joydev intel_uncore m ei_me ipmi_msghandler i2c_i801 pcspkr mei lpc_ich ioatdma i2c_smbus acpi_pad acpi_power_meter ip_tables xfs libcrc32c i2c_algo_bit drm_sh mem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft syscopyarea crc64 sysfillrect sg sysimgblt fb_sys_fops drm i40e ixgbe ahci libahci libata crc32c_intel mdio dca wmi fuse [last unloaded: ice] [145237.352917] CPU: 46 PID: 840629 Comm: kworker/46:2 Tainted: G S W I E 5.19.0-rc6+ #24 [145237.352921] Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015 [145237.352923] Workqueue: ice ice_service_task [ice] [145237.352948] RIP: 0010:ice_reset_vf+0x3d6/0x410 [ice] [145237.352984] Code: 30 ec f3 cc e9 28 fd ff ff 0f b7 4b 50 48 c7 c2 48 19 9c c0 4c 89 ee 48 c7 c7 30 fe 9e c0 e8 d1 21 9d cc 31 c0 e9 a 9 fe ff ff <0f> 0b b8 ea ff ff ff e9 c1 fc ff ff 0f 0b b8 fb ff ff ff e9 91 fe [145237.352987] RSP: 0018:ffffb453e257fdb8 EFLAGS: 00010246 [145237.352990] RAX: ffff8bd0040181c0 RBX: ffff8be68db8f800 RCX: 0000000000000000 [145237.352991] RDX: 000000000000ffff RSI: 0000000000000000 RDI: ffff8be68db8f800 [145237.352993] RBP: ffff8bd0040181c0 R08: 0000000000001000 R09: ffff8bcfd520e000 [145237.352995] R10: 0000000000000000 R11: 00008417b5ab0bc0 R12: 0000000000000005 [145237.352996] R13: ffff8bcee061c0d0 R14: ffff8bd004019640 R15: 0000000000000000 [145237.352998] FS: 0000000000000000(0000) GS:ffff8be5dfb00000(0000) knlGS:0000000000000000 [145237.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [145237.353002] CR2: 00007fd81f651d68 CR3: 0000001a0fe10001 CR4: 00000000001726e0 [145237.353003] Call Trace: [145237.353008] <TASK> [145237.353011] ice_process_vflr_event+0x8d/0xb0 [ice] [145237.353049] ice_service_task+0x79f/0xef0 [ice] [145237.353074] process_one_work+0x1c8/0x390 [145237.353081] ? process_one_work+0x390/0x390 [145237.353084] worker_thread+0x30/0x360 [145237.353087] ? process_one_work+0x390/0x390 [145237.353090] kthread+0xe8/0x110 [145237.353094] ? kthread_complete_and_exit+0x20/0x20 [145237.353097] ret_from_fork+0x22/0x30 [145237.353103] </TASK> Remove WARN_ON() from check if VSI is null in ice_reset_vf. Add "VF is already removed\n" in dev_dbg(). This WARN_ON() is unnecessary and causes call trace, despite that call trace, driver still works. There is no need for this warn because this piece of code is responsible for disabling VF's Tx/Rx queues when VF is disabled, but when VF is already removed there is no need to do reset or disable queues. Fixes: efe41860008e ("ice: Fix memory corruption in VF driver") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-11bonding: fix reference count leak in balance-alb modeJay Vosburgh
Commit d5410ac7b0ba ("net:bonding:support balance-alb interface with vlan to bridge") introduced a reference count leak by not releasing the reference acquired by ip_dev_find(). Remedy this by insuring the reference is released. Fixes: d5410ac7b0ba ("net:bonding:support balance-alb interface with vlan to bridge") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/26758.1660194413@famine Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11ice: Fix VSI rebuild WARN_ON check for VFBenjamin Mikailenko
In commit b03d519d3460 ("ice: store VF pointer instead of VF ID") WARN_ON checks were added to validate the vsi->vf pointer and catch programming errors. However, one check to vsi->vf was missed. This caused a call trace when resetting VFs. Fix ice_vsi_rebuild by encompassing VF pointer in WARN_ON check. Fixes: b03d519d3460 ("ice: store VF pointer instead of VF ID") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-11net: usb: qmi_wwan: Add support for Cinterion MV32Slark Xiao
There are 2 models for MV32 serials. MV32-W-A is designed based on Qualcomm SDX62 chip, and MV32-W-B is designed based on Qualcomm SDX65 chip. So we use 2 different PID to separate it. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220810014521.9383-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11net: virtio_net: notifications coalescing supportAlvaro Karsz
New VirtIO network feature: VIRTIO_NET_F_NOTF_COAL. Control a Virtio network device notifications coalescing parameters using the control virtqueue. A device that supports this fetature can receive VIRTIO_NET_CTRL_NOTF_COAL control commands. - VIRTIO_NET_CTRL_NOTF_COAL_TX_SET: Ask the network device to change the following parameters: - tx_usecs: Maximum number of usecs to delay a TX notification. - tx_max_packets: Maximum number of packets to send before a TX notification. - VIRTIO_NET_CTRL_NOTF_COAL_RX_SET: Ask the network device to change the following parameters: - rx_usecs: Maximum number of usecs to delay a RX notification. - rx_max_packets: Maximum number of packets to receive before a RX notification. VirtIO spec. patch: https://lists.oasis-open.org/archives/virtio-comment/202206/msg00100.html Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Message-Id: <20220718091102.498774-1-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jason Wang <jasowang@redhat.com>
2022-08-11virtio_net: support set_ringparamXuan Zhuo
Support set_ringparam based on virtio queue reset. Users can use ethtool -G eth0 <ring_num> to modify the ring size of virtio-net. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-43-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: support tx queue resizeXuan Zhuo
This patch implements the resize function of the tx queues. Based on this function, it is possible to modify the ring num of the queue. Inludes fixup: virtio_net: fix for stuck when change tx ring size with dev down When dev is set to DOWN state, napi has been disabled, if we modify the ring size at this time, we should not call napi_disable() again, which will cause stuck. And all operations are under the protection of rtnl_lock, so there is no need to consider concurrency issues. Message-Id: <20220801063902.129329-42-xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220811080258.79398-3-xuanzhuo@linux.alibaba.com> Reported-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: support rx queue resizeXuan Zhuo
This patch implements the resize function of the rx queues. Based on this function, it is possible to modify the ring num of the queue. Includes fixup: virtio_net: fix for stuck when change rx ring size with dev down When dev is set to DOWN state, napi has been disabled, if we modify the ring size at this time, we should not call napi_disable() again, which will cause stuck. And all operations are under the protection of rtnl_lock, so there is no need to consider concurrency issues. Message-Id: <20220801063902.129329-41-xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220811080258.79398-2-xuanzhuo@linux.alibaba.com> Reported-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: split free_unused_bufs()Xuan Zhuo
This patch separates two functions for freeing sq buf and rq buf from free_unused_bufs(). When supporting the enable/disable tx/rq queue in the future, it is necessary to support separate recovery of a sq buf or a rq buf. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-40-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: get ringparam by virtqueue_get_vring_max_size()Xuan Zhuo
Use virtqueue_get_vring_max_size() in virtnet_get_ringparam() to set tx,rx_max_pending. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-39-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-11virtio_net: set the default max ring size by find_vqs()Xuan Zhuo
Use virtio_find_vqs_ctx_size() to specify the maximum ring size of tx, rx at the same time. | rx/tx ring size ------------------------------------------- speed == UNKNOWN or < 10G| 1024 speed < 40G | 4096 speed >= 40G | 8192 Call virtnet_update_settings() once before calling init_vqs() to update speed. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-38-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-10net/tls: Use RCU API to access tls_ctx->netdevMaxim Mikityanskiy
Currently, tls_device_down synchronizes with tls_device_resync_rx using RCU, however, the pointer to netdev is stored using WRITE_ONCE and loaded using READ_ONCE. Although such approach is technically correct (rcu_dereference is essentially a READ_ONCE, and rcu_assign_pointer uses WRITE_ONCE to store NULL), using special RCU helpers for pointers is more valid, as it includes additional checks and might change the implementation transparently to the callers. Mark the netdev pointer as __rcu and use the correct RCU helpers to access it. For non-concurrent access pass the right conditions that guarantee safe access (locks taken, refcount value). Also use the correct helper in mlx5e, where even READ_ONCE was missing. The transition to RCU exposes existing issues, fixed by this commit: 1. bond_tls_device_xmit could read netdev twice, and it could become NULL the second time, after the NULL check passed. 2. Drivers shouldn't stop processing the last packet if tls_device_down just set netdev to NULL, before tls_dev_del was called. This prevents a possible packet drop when transitioning to the fallback software mode. Fixes: 89df6a810470 ("net/bonding: Implement TLS TX device offload") Fixes: c55dcdd435aa ("net/tls: Fix use-after-free after the TLS device goes down and up") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Link: https://lore.kernel.org/r/20220810081602.1435800-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-10net:bonding:support balance-alb interface with vlan to bridgeSun Shouxin
In my test, balance-alb bonding with two slaves eth0 and eth1, and then Bond0.150 is created with vlan id attached bond0. After adding bond0.150 into one linux bridge, I noted that Bond0, bond0.150 and bridge were assigned to the same MAC as eth0. Once bond0.150 receives a packet whose dest IP is bridge's and dest MAC is eth1's, the linux bridge will not match eth1's MAC entry in FDB, and not handle it as expected. The patch fix the issue, and diagram as below: eth1(mac:eth1_mac)--bond0(balance-alb,mac:eth0_mac)--eth0(mac:eth0_mac) | bond0.150(mac:eth0_mac) | bridge(ip:br_ip, mac:eth0_mac)--other port Suggested-by: Hu Yadi <huyd12@chinatelecom.cn> Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-10macsec: Fix traffic counters/statisticsClayton Yager
OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and InOctetsDecrypted were incrementing by the total number of octets in frames instead of by the number of octets of User Data in frames. The Controlled Port statistics ifOutOctets and ifInOctets were incrementing by the total number of octets instead of the number of octets of the MSDUs plus octets of the destination and source MAC addresses. The Controlled Port statistics ifInDiscards and ifInErrors were not incrementing each time the counters they aggregate were. The Controlled Port statistic ifInErrors was not included in the output of macsec_get_stats64 so the value was not present in ip commands output. The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA were not incrementing. Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-30 16:39:13 +0000