| Age | Commit message (Collapse) | Author |
|---|
|
As opposed to Spectrum-1, in which time stamps arrive through a pair of
dedicated events into a queue and later are being matched to the
corresponding packets, in Spectrum-2 we are reading the time stamps
directly from the CQE. Software can get the time stamp in UTC format
using CQEv2.
Add a time stamp field to 'struct mlxsw_skb_cb'. In
mlxsw_pci_cqe_{rdq,sdq}_handle() extract the time stamp from the CQE into
the new time stamp field. Note that the time stamp in the CQE is
represented by 38 bits, which is a short representation of UTC time.
Software should create the full time stamp using the global UTC clock.
Read UTC clock from hardware only for PTP packets which were trapped to CPU
with PTP0 trap ID (event packets).
Use the time stamp from the SKB when packet is received or transmitted.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are
sent as control packets is not updated at egress port. To overcome this
limitation, PTP packets which require time stamp, should be sent as data
packets with the following details:
1. FID valid = 1
2. FID value above the maximum FID
3. rx_router_port = 1
>From Spectrum-4 and on, this limitation will be solved.
Extend the function which handles TX header, in case that the packet is
a PTP packet, add TX header with type=data and all the above mentioned
requirements. Add operation as part of 'struct mlxsw_sp_ptp_ops', to be
able to separate the handling of PTP packets between different ASICs. Use
the data packet solution only for Spectrum-2 and Spectrum-3. Therefore, add
a dedicated operation structure for Spectrum-4, as it will be same to
Spectrum-2 in PTP implementation, just will not have the limitation of
control packets.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement physical hardware clock operations. The main difference between
the existing operations of Spectrum-1 and the new operations of Spectrum-2
is the usage of UTC hardware clock instead of FRC.
Add support for init() and fini() functions for PTP clock in Spectrum-2.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Query UTC sec and nsec PCI offsets during the pci_init(), to be able to
read UTC time later.
Implement functions to read UTC seconds and nanoseconds from the offset
which was read as part of initialization.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lay the groundwork for Spectrum-2 support. On Spectrum-2, the packets get
the time stamps from the CQE, which means that the time stamp is attached
to its packet.
Configure MTPTPT to set which message types should arrive under which
PTP trap. PTP0 will be used for event message types, which means that
the packets require time stamp. PTP1 will be used for other packets.
Note that in Spectrum-2, all packets contain time stamp by default. The two
types of traps (PTP0, PTP1) will be used to separate between PTP_EVENT
traps and PTP_GENERAL traps, so then the driver will fill the time stamp as
part of the SKB only for event message types.
Later the driver will enable the traps using 'MTPCPC.ptp_trap_en' bit.
Then, PTP packets start arriving through the PTP traps.
Currently, the structure 'mlxsw_sp2_ptp_state' contains only the common
structure, the next patches will extend it.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, Tx completions are reported using Completion Queue Element
version 1 (CQEv1). These elements do not contain the Tx time stamp,
which is fine as Spectrum-1 reads Tx time stamps via a dedicated FIFO
and Spectrum-2 does not currently support PTP.
In preparation for Spectrum-2 PTP support, use CQEv2 for Spectrum-2 and
newer ASICs, as this CQE format encodes the Tx time stamp.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MTPTPT register is used to set which message types should arrive under
which PTP trap. Currently, PTP0 is used for event message types, which
means that the packets require time stamp. PTP1 is used for other packets.
This configuration will be same for Spectrum-2 and newer ASICs. In
preparation for Spectrum-2 PTP support, add helper functions to
configure PTP traps and use them for Spectrum-1. These functions will be
used later also for Spectrum-2.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Aside of urb->transfer_buffer_length and urb->context which might
change in the TX path, all the other URB parameters remains constant
during runtime. So, there is no reasons to call usb_fill_bulk_urb()
each time before submitting an URB.
Make sure to initialize all the fields of the URB at allocation
time. For the TX branch, replace the call usb_fill_bulk_urb() by an
assignment of urb->context. urb->urb->transfer_buffer_length is
already set by the caller functions, no need to set it again. For the
RX branch, because all parameters are unchanged, simply remove the
call to usb_fill_bulk_urb().
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220729080902.25839-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The same function to read the switch id is used by drivers based on
qca8k family switch. Move them to common code to make them accessible
also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same port LAG functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same port VLAN functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Also drop exposing busy_wait and make it static.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same port mirror functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same port FDB/MDB function are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Also drop bulk read/write functions and make them static
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same set age, MTU and port enable/disable function are used by
driver based on qca8k family switch.
Move them to common code to make them accessible also by other drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same bridge functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same logic to disable/enable port, set eee and get ethtool stats is
used by drivers based on qca8k family switch.
Move it to common code to make it accessible also by other drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same mib function is used by drivers based on qca8k family switch.
Move it to common code to make it accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same ATU function are used by drivers based on qca8k family switch.
Move the bulk read/write helper to common code to declare these shared
ATU functions in common code.
These helper will be dropped when regmap correctly support bulk
read/write.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same reg table and read/write/rmw function are used by drivers
based on qca8k family switch.
Move them to common code to make it accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same MIB struct is used by drivers based on qca8k family switch. Move
it to common code to make it accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some switch may not support mib autocast feature and require the legacy
way of reading the regs directly.
Make the mib autocast feature optional and permit to declare support for
it using match_data struct in a dedicated qca8k_info_ops struct.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using of_device_get_match_data is expensive. Cache match data to speed
up access and rework user of match data to use the new cached value.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling on 'non-existent' in comment
Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
Link: https://lore.kernel.org/r/20220728032854.151180-1-RuffaloLavoisier@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix following includecheck warning:
./drivers/net/ethernet/mellanox/mlxsw/core_linecard_dev.c: linux/err.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220727233801.23781-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let the core take the devlink instance lock around health callbacks and
remove the now redundant locking in the drivers.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change devlink instance locks in mlx5 driver to have devlink health
recovery callback locked, while keeping all driver paths which lead to
devl_ API functions called by the driver locked.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change devlink instance locks in mlx4 driver to have devlink reload
callback locked, while keeping all driver paths which leads to devl_ API
functions called by the mlx4 driver locked.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use devl_ API to call devl_port_register() and devl_port_unregister()
instead of devlink_port_register() and devlink_port_unregister(). Add
devlink instance lock in mlx4 driver paths to these functions.
This will be used by the downstream patch to invoke mlx4 devlink reload
callbacks with devlink lock held.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use devl_ API to call devl_region_create() and devl_region_destroy()
instead of devlink_region_create() and devlink_region_destroy().
Add devlink instance lock in mlx4 driver paths to these functions.
This will be used by the downstream patch to invoke mlx4 devlink reload
callbacks with devlink lock held.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change devlink instance locks in mlx5 driver to have devlink reload
callbacks locked, while keeping all driver paths which lead to devl_ API
functions called by the driver locked.
Add mlx5_load_one_devl_locked() and mlx5_unload_one_devl_locked() which
are used by the paths which are already locked such as devlink reload
callbacks.
This patch makes the driver use devl_ API also for traps register as
these functions are called from the driver paths parallel to reload that
requires locking now.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor fw reset code to have the unload driver part done on
mlx5_fw_reset_complete_reload(), so if it was called by the PF which
initiated the reload fw activate flow, the unload part will be handled
by the mlx5_devlink_reload_fw_activate() callback itself and not by the
reset event work.
This will be used by the downstream patch to invoke devlink reload
callbacks with devlink lock held.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add callbacks
=============
.selftest_check: returns true for flash selftest.
.selftest_run: runs a flash selftest.
Also, refactor NVM APIs so that they can be
used with devlink and ethtool both.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let the TLS TX recycle pool be more flexible in size, by continuously
and dynamically allocating and releasing HW resources in response to
changes in the connections rate and load.
Allocate and release pool entries in bulks (16). Use a workqueue to
release/allocate in the background. Allocate a new bulk when the pool
size goes lower than the low threshold (1K). Symmetric operation is done
when the pool size gets greater than the upper threshold (4K).
Every idle pool entry holds: 1 TIS, 1 DEK (HW resources), in addition to
~100 bytes in host memory.
Start with an empty pool to minimize memory and HW resources waste for
non-TLS users that have the device-offload TLS enabled.
Upon a new request, in case the pool is empty, do not wait for a whole bulk
allocation to complete. Instead, trigger an instant allocation of a single
resource to reduce latency.
Performance tests:
Before: 11,684 CPS
After: 16,556 CPS
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The transport interface send (TIS) object is responsible for performing
all transport related operations of the transmit side. The ConnectX HW
uses a TIS object to save and access the TLS crypto information and state
of an offloaded TX kTLS connection.
Before this patch, we used to create a new TIS per connection and destroy
it once it’s closed. Every create and destroy of a TIS is a FW command.
Same applies for the private TLS context, where we used to dynamically
allocate and free it per connection.
Resources recycling reduce the impact of the allocation/free operations
and helps speeding up the connection rate.
In this feature we maintain a pool of TX objects and use it to recycle
the resources instead of re-creating them per connection.
A cached TIS popped from the pool is updated to serve the new connection
via the fast-path HW interface, updating the tls static and progress
params. This is a very fast operation, significantly faster than FW
commands.
On recycling, a WQE fence is required after the context params change.
This guarantees that the data is sent after the context has been
successfully updated in hardware, and that the context modification
doesn't interfere with existing traffic.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let the caller of mlx5e_ktls_tx_handle_ooo() take care of updating the
stats, according to the returned value. As the switch/case blocks are
already there, this change saves unnecessary branches in the handler.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TLS TIS objects have a defined role in mapping and reaching the HW TLS
contexts. Some standard TIS attributes (like LAG port affinity) are
not relevant for them.
Use a dedicated TLS TIS create function instead of the generic
mlx5e_create_tis.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
delete extra space and tab in blank line, there is no functional change.
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Link: https://lore.kernel.org/r/20220727081253.3043941-1-studentxswpy@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the function declaration of mlx5e_init_l2_addr to en/fs.h, rename
to mlx5e_fs_init_l2_addr to align with the fs API functions naming
convention and let it take mlx5e_flow_steering as arguments while keeping
implementation at en_fs.c file. This helps maintain a clean driver code
and avoids unnecessary dependencies.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add inner callee for ndo mlx5e_vlan_rx_add_vid and
mlx5e_vlan_rx_kill_vid, to separate the priv usage from other
flow steering flows.
Move wrapper ndo's into en_main, and split the rest of the functionality
into a separate part inside en_fs.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Separate mlx5e_set_rx_mode into two, and move caller to en_main while
keeping implementation in en_fs in the newly declared function
mlx5e_fs_set_rx_mode. This; to minimize the coupling of flow_steering
to priv.
Add a parallel boolean member vlan_strip_disable to
mlx5e_flow_steering that's updated similarly as its identical in priv,
thus making it possible to adjust the rx_mode work handler to current
changes.
Also, add state_destroy boolean to mlx5e_flow_steering struct which
replaces the old check : !test_bit(MLX5E_STATE_DESTROYING, &priv->state).
This state member is updated accordingly prior to
INIT_WORK(mlx5e_set_rx_mode_work), This is done for similar purposes as
mentioned earlier and to minimize argument passings.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Make flow_steering struct contain mlx5_core_dev such that
it becomes self contained and easier to decouple later on this series.
Let its values be initialized in mlx5e_fs_init().
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Let en_fs report errors via mdev error report API, aka mlx5_core_*
macros, thus replace the netdev API reports.
This to minimize netdev coupling to the flow steering struct.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Make mlx5e_flow_steering member of mlx5e_priv a pointer.
Add dynamic allocation respectively.
Allocate fs for all profiles when initializing profile,
symmetrically deallocate at profile cleanup.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Introduce allocation and de-allocation functions for both flow steering
VLAN and TC as part of fs API.
Add allocations of VLAN and TC as nic profile feature, such that
fs_init() will allocate both VLAN and TC only if they're featured in
the profile. VLAN and TC are relevant for nic_profile only.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Move mlx5e_tc_table struct to en_tc.c thus make it private.
Introduce allocation and deallocation functions as part of the tc API
to allow this switch smoothly.
Convert mlx5e_nic_chain() macro to a function of en_tc.c.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Make fs.tc be a pointer and allocate it dynamically.
Add mlx5e_priv pointer to mlx5e_tc_table, and thus get a work-around to
accessing priv via tc when handling tc events inside mlx5e_tc_netdev_event.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for tc action api for police.
Offloading standalone police action without
a tc rule and reporting stats.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5e_tc_meter_get() to get an existing meter.
mlx5e_tc_meter_update() to update an existing meter without refcount.
mlx5e_tc_meter_replace() to get/create a meter and update if needed.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add red and green counters per meter instance.
TC police action is implemented as a meter instance.
The meter counters represent the police action
notexceed/exceed counters.
TC rules using the same meter instance will use
the same counters.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
